It would be possible to automatically disable the reminders during a Keynote presentation?

Mountain Lion does this automatically. But not on iOS.

Similar Messages

Project something on the bottom of the screen DURING a Keynote presentation?

I need to be able to project something on the bottom of the screen DURING a Keynote presentation. Is that possible? At our church we have a numbering system for parents/kids and occassionaly we need to project the number so the parent can go check on their child. How can we do that during an active Keynote presentation?

I use; Ink2Go

I am looking to upgrade to a new iPhone. Is it possible to then disable the phone capabilities of my old phone so I can give it to my teen for use as an iTouch? or does the old iPhone just become unusable which would be such a waste.

I am looking to upgrade to a new iPhone. Is it possible to then disable the phone capabilities of my old phone so I can give it to my teen for use as an iTouch? or does the old iPhone just become unusable which would be such a waste.
Thank you.

macmargaret01 wrote:
I am looking to upgrade to a new iPhone. Is it possible to then disable the phone capabilities of my old phone so I can give it to my teen for use as an iTouch? or does the old iPhone just become unusable which would be such a waste.
Thank you.
The official instructions: http://support.apple.com/kb/HT3406

It is possible to programmatically disable the "Executing Code Modules in an External Instance of CVI" feature?

It is possible to programmatically disable the "Executing Code Modules in an External Instance of CVI" feature within a CVI project?
I know how to do it manually (Configure > Adapters... > Adapter Configuration).
Thanks in advance,
--M

Yes. TestStand 2.0 added the Engine.CVIAdapter_ExecuteStepsInCVI property.

I had my iPhone stolen and I wonder if I would be possible to completely lock the device, preventing the thief turned the phone again?

I had my iPhone stolen and I wonder if I would be possible to completely lock the device, preventing the thief turned the phone again?

You can lock the device to prevent them from getting to your personal information if you set up mobileme, but unfortunately all the theif has to do is a forced restore and set up as new, get a new SIM and use it.

Shouldn't the proximity sensor disable the screen during call w/headphones?

I've noticed that the proximity sensor does not automatically disable the touchscreen when I'm on a call if I have the headphones plugged in.Is this the case for others as well? Since I keep my 3GS in my pocket during these calls, what tends to happen is that the "end call" (or whatever it is called) button gets pressed from my movements and my call terminates at some point.
Does this make sense?

I am experiencing the same issue. This has not been fixed as of 7.0.3. It's a very annoying issue since it completely breaks the "hands-free" benefit of using siri. Now I always have to take the phone out of my pocket, voice dial, turn the screen off, and put the phone back in my pocket. very hard to do on a bike.

Is it possible to have a live calculator in my keynote presentation so that I don't have to exit it while I am presenting?

Is it possible to have a live calculator in my keynote presentation so that I don't have to exit it while I am presenting?

This is not possible.
If you open both Keynote and Calculator, you can use the application switcher (command Tab) to swap back and forward between the two applications.

Lion does not have "Save as." How do I change the name of a Keynote presentation?

How can I change the name of a Keynote presentation in Lion since it does not have "save as'?

This is so lame it feels like MS Windows. From a simple one step process it now requires first to duplicate, then ito browse back to the folder you were working in and then finally to type in a new mame. Why not just leave save as?????? This is getting so very anoying ...... just like windows with its never ending quetsions. Apple please bring back Save as.

Computer crash at the end of a keynote presentation being recorded

Hi there,
I attempt at recording my audio during a keynote presentation that lasts about 90 minutes. To this end I use the new slide show recording feature in keynote 4.
Twice now towards the very end of the presentation my Mac crashed. I am using all the latest software (keynote 4.0.3), latest system software update (10.5.2) on a MacBook Pro 2.33 GHz Intel Core 2 Duo. I am using an external microphone hooked up to my Mac. I can tape my audio using e.g. Hijack Pro without crashes.
Any trivial reasons, suggestions?
Many thanks, Kay

maybe this is not the most elegant solution, but it has worked for me:
since you know how long the movie is, set the delay for the transition to the next slide to the length of the movie. you have have to play with this, as there might be time from the previous transition that has to be added to it.

The audio on my keynote presentations on iPad does not work

The audio on my keynote slides using my iPad now do not work. (I used the same presentation before with no problems--now no audio). No transitions have been changed, and all slides have been checked in Inspector. All audio is turned all the way up. All other iPad audio--music, videos, etc. work fine. Playing the slideshow on my Mac audio works just fine too. Help--why wont audio work on Keynote on my iPad?

I have the same issue exactly. I have followed the pairing instructions very carefully with no results, no volume control, I wish I could help you out but you were the only post I ran into in discussions here's hoping someone hears our cry for help!

What does the red or green bar at the top of a Keynote presentation rehearsal mean?

Can anyone tell me what the red or green bar means at the top of a Keynote rehearsal presentation? I got the answer wrong on the iworks exam and can't find the answer anywhere. Thanx

This is the Ready to Advance Indicator.
Red means the slide is building effects and is not ready to be advanced to the next slide.
Green means the slide is fully built and is ready to be advanced.
See page 209 of the user manual.

Is it possible to automate/script the removal of workflows from workflow archive?

We don't allow our CQ authors to activate content directly. They must activate their content by executing a custom approval workflow we'd developed as part of our first CQ project. As you can imagine this workflow is run very often. So much so that when it came time to upgrade from CQ v5.4 to CQ v5.5 there were too many for me to purge the workflow archive and leaving all those workflows in place caused the upgrade process to run for a very long time. At the time I was provided with a package for the CQ v5.4 environment that once installed provided a component (/apps/tools/components/purgewf/run.html) that I could then then leverage to kick off a process that given enough time would purge all of the workflows from the workflow archive.
Now that we are on CQ v5.5 I'd like to be proactive and develop a script that I can schedule to execute on a regular basis that would basically do the same thing as that component from CQ v5.4. Does anybody know if there's an easy way to do this with CQ v5.5? Could I simply install the same component that I was given for CQ v5.4 and then leverage curl to kick the process off as I've done that sort of thing before to kick off JMX operations such as runDataStoreGGarbageCollection. This wouldn't be a JMX operation but I'm thinking it migh actually be easier to use curl to kick of something like purgewf/run.html though I'm not really sure what I'm basing that on other than instinct.

This has proved very helpful thank you.
Although I've one point of clarification I could still use some help with. The document provided by Sham, HC mentions within that it's possible to clean up workflows that have had a status of RUNNING for more than 1 day but it seems to be saying its neccessary to create a list of those workflow models you want this feature of the purge mechanism to act on. I've looked the Felix configuration over and I can't see that any of the properties there would accept a list of workflow model names and I've tried all of the various modes that are available for the process and none of them do this automatically by assuming any sort of default value for this list. Is this capablity really there? Not that I see the ability to purge RUNNING workflows as critical functionality for the purge process as the number of problem workflows with this status tends to be managable but if yet if there's a way to make it do it in addition to clean out the archive it would be nice.

Is it possible to automatically login the OSX 10.5 server after a restart?

I am screen sharing with my server at work from home. I would like to reboot the server after doing some updates, but I know the login screen is going to come up after I restart. Is it possible to set it up so that the login screen auto-populates or gets skipped?
Thanks,
Rich

Got it. It works just like it does in OSX. Duh.

InDesign CS6: Is it possible to automatically reorder the paragraphs in a document

I have a thesaurus with 1,000 entries.
Each entry looks like this:
also
He likes bananas and also strawberries.
as well as, in addition to, besides,
too, plus
I want to change the document, so that in each instance, the example sentence "(He likes bananas...) comes after the list of synonyms (as well as, in addition to...). The formatting is different for each (one is 100% black and the other is 70%).
I would like to know if there's a way to do this automatically.
Many thanks.

Susan,
If you have 4 para styles, try this very clever tool written by Ariel Walden: Change Consecutive Paragraphs | FreelanceBookDesign.com
If you do want to save $25 and make 5 clicks free* (although time is still money):
* Only 1 click if you use Multi-Find/Change!

Was told a USB device would create a PDF automatically from the data contained within when plugged into my USB port. Doesn't seem to work. How does this work and how can I fix the device I received?

Acrobat is not on the USB device - only Adobe Reader needed on the PC. How does this work? How can I fix this device if at all?

You need to ask the people who sold it to you. Doesn't sound like it has anything to do with Reader.
However, you should be wary of devices that automatically try to open files when plugged in. They can also infect your computers with all kinds of viruses or malware.

It would be possible to automatically disable the reminders during a Keynote presentation?

Similar Messages

Maybe you are looking for