IT0002 Data Field configuration

Hi Experts
I need configure IT0002 Date of Birth from display field to modify field. I check IT0002 field configuration via IMG Personnel Management  Personnel Administration  Customizing User Interfaces  Change Screen Modifications  select screen by feature that is assigned to that particular country (SE) and found that Date of Birth field has been configured as Modify field already. I tried to make some configuration change for some fields , but the changes do not impact screen behavior of IT0002. On the other hand, if I make some IT0002 configuration change for some other countries, it works. I suspect, besides the screen configuration change via the path above, there might be other screen configuration that also impact IT0002 display behavior. Please advise where should I check screen data fields configuration other than the path above. Thanks.
Regards,
Jim

Suresh - You are right, thanks!!
Jim - There is no SE for selection in feature as well as in country grouping. There is no problem if you follow above path.
It will help us to give correct solution if you provide below items -
Mod. Pool -
Screen -
Variable Key -
Alt.Screen -
Thanks,
Kiran.
Reward points are appreciated.

Similar Messages

How to make Birth date field (GBDAT) under IT0002 Personal data editable

Hello Consultants,
We had initially Birth date field (GBDAT) under IT0002 Personal data editable ...But after upgrade is made non editable...
We want to make it editable again..
Kindly suggest how we can proceed abt this....

Hi Anju,
1. Go to PA30 >> Infotype 0002 >> On Date of Birth Field >> Enter F1 and find the Technical Parameter and idenfity which Screen is being Used... say for Eg: MP000200 / 2010
2. Go to Feature P0002 in PE03 and then identify the Return code for the Molga and Co. Code.
This Return feature is nothing but the Variable Key. Say for Example: 10
3. Now Go to SM30 >> T588M.....
3. Idenfity the Screen that you found in the step 1 and Variable Key you found in Step 2.
i.e. MP000200 / 2010 / 10
5. Double Click on that record and Find the Screen Field P0002-GBDAT... this has been set to Output Field... change it to Standard and it will work.
Hope this helps !!!
Kumarpal Jain.

Cannot add hub-managed content type with external list lookup columns to a list -- Error:Id field is not set on the external data field

This is a variation on the issue mentioned in this
post
We are using SP 2010 Content Hub to manage our content types. On the content hub we've created a couple of exteranl lists, and then created some site columns as lookups against these lists. We then added the columns to one of our content types
and set it to publish.
After the publishing job executed, I tried adding the content type (which now appears on the subscriber sites) to one of the document libraries on one of the subscriber sites. When I did that it threw the following error:
Microsoft.SharePoint.WebControls.BusinessDataListConfigurationException: Id field is not set on the external data field
at Microsoft.SharePoint.SPBusinessDataField.CreateIdField(SPAddFieldOptions op)
at Microsoft.SharePoint.SPBusinessDataField.OnAdded(SPAddFieldOptions op)
at Microsoft.SharePoint.SPFieldCollection.AddFieldAsXmlInternal(String schemaXml, Boolean addToDefaultView, SPAddFieldOptions op, Boolean isMigration, Boolean fResetCTCol)
at Microsoft.SharePoint.SPContentType.ProvisionFieldOnList(SPField field, Boolean bRecurAllowed)
at Microsoft.SharePoint.SPContentType.ProvisionFieldsOnList()
at Microsoft.SharePoint.SPContentType.DeriveContentType(SPContentTypeCollection cts, SPContentType& ctNew)
at Microsoft.SharePoint.SPContentTypeCollection.AddContentTypeToList(SPContentType contentType)
at Microsoft.SharePoint.SPContentTypeCollection.AddContentType(SPContentType contentType, Boolean updateResourceFileProperty, Boolean checkName, Boolean setNextChildByte)
at Microsoft.SharePoint.SPContentTypeCollection.Add(SPContentType contentType)
at Microsoft.SharePoint.ApplicationPages.AddContentTypeToListPage.Update(Object o, EventArgs e)
at System.Web.UI.WebControls.Button.OnClick(EventArgs e)
at System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument)
at System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)   b55297ed-717f-466d-8bdc-297b20344d3f
I checked the external content type configuration and it did specify an "id column". Anyone know if what I am attempting to do is possible and if so, what special configurations are required?
Thanks

The issue is not External Content type or external list but the look up column.
It's not possible to publish a look up column via the Content Type Hub.
If you need to do this then an alternate way is to use a Managed Metadata column instead, otherwise you will have to implement this via a feature.
Varun Malhotra
=================
If my post solves your problem could you mark the post as Answered or Vote As Helpful if my post has been helpful for you.

Dates fields issue in the sales orders through IDOC

Hi all,
I'm trying to create a sales order through Inbound IDOC using IDOC_INPUT_ORDERS.
I have 2 custom fields in the sales order which are date fields.
I'm populating them from the IDOC segments(using E1EDKT1-tdid, E1EDKT2-tdline) in the user-exit just before the call trasacation statement. These dates are not coming for a few orders... but are getting populated normally for few of them.
But the tricky part is that... if I process the same IDOC for the second time.. the order created is having the dates.
My issue is that.. i need all the orders to be populated with the dates which IDOC have.
Could anyone please help me with this issue.
All the answers/replies are highly appreciated!!
Thanks for you help!

hi,
the following may be of help
There are 2 major exceptions to the batch input internal table. All text data from the segments E1EDKT1/2 and E1EDPT1/2 are not part of the batch input session. Text elements from these segments are posted directly to the data base AFTER the sales order has been created (please note: in order that item texts are posted correctly to the sales order the field POSEX from segment E1EDP01 MUST be transmitted). Also, configurable material information from the IDOC is exported to a global memory and therefore will not be part of the batch input session. Configurable material data is performed in Form CHECK_CONFIGURATION and the data is exported to global memory in the following code:
Exportiert IDOC Daten ins globale Memory
export IDOC data to global memory
call function 'CUXC_IDOC_TO_MEMORY'
       tables
            cfg_instref = xe1curef
            cfg_ref     = xe1cucfg
            inst        = xe1cuins
            part_of     = xe1cuprt
            value       = xe1cuval
       exceptions
            error       = 1
            others      = 2.
One extra piece of useful infomartion if you wish to debug the process is to set your breakpoints at the following points
for Function module IDOC_INPUT_ORDERS
include LVEDAF0F..
CALL TRANSACTION 'VA01' USING bdcdata
                            MODE input_method
                            UPDATE 'S'
                            MESSAGES INTO xbdcmsgcoll.
Now input_method is A foreground process and N for background processing but try changing it to P (pass through mode)
If you have breakpoints in va01, e.g. MV45AF0B_BELEG_SICHERN,(the part where the sales document is saved)
they will be hit, e.g
perform userexit_save_document_prepare.
perform userexit_save_document.
Lastly, don't forget using program SDJEDI , see note 380603 for more information on this
Hope this is useful
Paul Quinn

Idoc- File scenario: Read a data field in IDOC and name the file with it

Hi All,
I am configuring an IDOC to File scenario.
I have a requirement where I need to read one of the IDOC data field and use that as the name of the File.
E.g: If the IDOC data field-1 = '123456', then I need to name the output file as '123456'.
Is it possible to do this. Appreciate your help on same.
Thanks
Shirin

Try this code..
desired field from IDoc will be input parameter to UDF
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
conf.put(key,a); // a is input parameter
String ourSourceFileName = conf.get(key);
return ourSourceFileName;
Also, check Adapter specific message attributes in file adapter, check filename

:Due On" date field missing while posting with Spl GL indicator for vendor

Hello,
I am facing a problen while posting a n entry with spl GL indicator in fb01, the issue is Due On date field is missing in the screen.
I am posting an spl GL transaction for a vendor thro FB01 and after entering the posting key 39, vendor code and spl Gl indicator in line item and in next screen, the "Due ON" date field is not appearing.
Both vendor recon account and spl GL alternative account use same field status group and checked the field status group , the due date, payments terms are made optional.
The strange thing is, when I use the same vendor with Spl GL indicator "A" , the Due ON field is missing in next screen, and when I use spl indicator " B" , for same vendor, Due On date field is appearing.
Is there any specfic field status setting for DUE ON date field for Spl GL indicator wise? or please help me how to bring due on date field in the screen when posting spl GL transaction?
Please help me on this.
Regards
Surya

Hello Surya,
To make field baseline date for payment (BSEG-ZFBDT) ready for input for
posting the down payment, the following Customizing setting is
necessary:
Financial Accounting -> Accounts Receivable and Accounts Payable ->
Business Transactions -> Outgoing Payments -> Automatic Outgoing Payment
-> Payment Method/Bank Selection -> Configure payment program -> All
company codes -> double-click on corresponding company code -> under
Customer -> 'Sp. G/L transactions to be paid' the letter A should be
entered.
The field "Due On (BSEG-ZFBDT)" cannot be controlled with field status.
It is contolled by field attribute of screen painter (Tcd: SE51). If
you look at element attribute for "Due On" field, a flag for required
entry is activated. In this case, field status has no control over
the field.
As of release 3.1G, field BSEG-ZFBDT is hardcoded in most FI screens
to be mandatory and cannot be influenced by any field status
changes. This situation is only valid when posting with special G/L
indicator (ie PK 29/39).
SAP development team has determined that this is a critical field. The
reason behind this is that this special GL screen and the data entered
here are very important to many other programs. This data affects
liabilities and receivables where due date is necessary almost
everytime. Thus, we changed this field in this screen in order to
prevent problems in many other areas. The reason is explained further in
note 95079.
545944    FAQ, down payment, tax code, baseline date
above Field is controlled through SE51 only.
Tcode : SE51
Program (screen)     SAPMF05A
Screen number        304
Eliment list press display.
special attributes.
BSEG-ZFBDT - Required.
Other options are below.
     The attribute "Input" can have the following values:
     o    Not possible
         The input/output field cannot be supplied with an input - that
         the screen element can only be used for outputs.
     o   Possible
         The input/output field can be supplied with an input at runtime
         the remainder of the transaction, an input is not required.
     o   Recommended (Optional Field)
         The input/output field should be supplied with an input at runt
         The system, of course, does not check immediately whether there
         been an input. During the remainder of the transaction, however
         input is necessary.
         To mark this kind of target field, the input template starts wi
         special character that is represented in the Screen Painter by
         question mark ('?'). The question mark will be suppressed only
         the field is in a table control or a step loop.
         You use the "target field", for example, if inputs cover severa
         screens and only at a later stage are subject to a common check
o   Required Field
    The input/output field must be supplied with an input at runtime.
    The system checks this property immediately, and very definitely
    when the event is processed (PROCESS AFTER INPUT).
    So that such a required field is marked accordingly, its input
    template must begin with a special character that is represented in
    the Screen Painter by a question mark ('?'). The question mark is
    suppressed only if the field is in a table control or a step loop.
I hope above information will resolve your issue.
Kind Regards,
Fernando Evangelista

Distributed Document Capture and date fields

Greetings!
We are using Oracle Distributed Document Capture and Universal Content Management as repository, it works fine. However we defined a custom metadata field with data type "date" in UCM and we defined a scan profile with its asssociated date field and the problem that we have is when we are using the distributed document capture client and the user selects a date from the calendar and send the document, the commit process fails with the following error message :
The field 'xxx' does not contain a valid date.
However If the user types the date field as "29/01/2009 00:00" the commit process works fine and the document is stored on UCM.
My question is how to enable the calendar on the Distributed Document Capture client in order to enter a valid date with format "dd/m/yyyy hh:mm"
Thanks!

Thanks for your answer I set the property "Automatically assign a Content ID on check in" Should I specify the minor revision label and the major revision label?.
Because I set just the "Automatically assign a Content ID on check in" and now I got the following when I am scanning documents:
***Error*** Failed to process batch 01354425_01354446. Error Number: 40011, Error: Failed to commit batch (with delete). Commit Profile - ucm: Document file already exists. Commit is configured to abort. Document File: \\svrdocumentos_ejc_ejercito_mil_co\batch\00J\0000000D\0000000D_1.TIF
The good news is the previous error "Error Number: 40008" is solved
I really appreciate yor help.
Thanks.

How to make date fields in CRMD_ORDER as GRAY (i.e non editable)

hi Experts,
i am new to SAP -CRM ,, here i have one queiry related to CRMD_ORDER.
In my requirement at the time of creating the leases in the CRMD ORDER The date option for Build up period should be grayed out means non editable, and it should be available to amend later means when user want change the order in CRMDORDER it should be editable..
is it possible in CONFIGURATION level or we need to modify any BADi's..
please suggest..
thanks in advance..
Best regards,
pradeep.

Hi Pradeep,
If u are talking about the date field which are from date pfofile then i date profile u can set the date types as a non-editable (display only) the the user will not able to edit the dates.
Date Profile->Date Types->Screen Areas: Dates->tick checkbox(only display field)
Regards,
DD's

Large memo meta-data field not fully indexed

Hi all,
Another day, another UCM question. Hopefully the answers given to my questions will help people facing the same issues.
We created a custom meta-data field of type memo. Looking into the database, the following columns were created:
colmeta.xcustom1 varchar2(2000)
docmeta.xcustom1 varchar2(2000)
idctext1.xcustom1 varchar2(2000)
idctext2.xcustom1 varchar2(2000)
indexerstate.xcustom1 varchar2(2000)
We want specific meta-data field to hold 5000 characters and to have its content retrievable by the full text search feature. We've read about the MinMemoFieldSize and MemoFieldSize configuration variables, but reasoned that they shouldn't be used since the size requirement is only for this specific field.
So we've updated the database schema manually (can't seem to find another way to do this) by sending these instructions:
alter table colmeta modify xcustom1 varchar2(5000)
alter table docmeta modify xcustom1 varchar2(5000)
Then restarted the UCM server and performed a full collection index rebuild.
These updates work in that new content can be created with a meta-data value of up to 5000 characters (it would give an error before). However, it seems that the whole field value is not being indexed: doing a full-text search on a word in the first 2000 field characters finds the content, but doing a full-text search on a word in the last 3000 field characters doesn't.
We've tried manually extending the size of the idctext1, idctext2 and indexerstate columns, but it doesn't seem to have any impact.
Any ideas?
Thanks again.
Edited by: Spiff on 1-Feb-2012 12:32 PM

Hi ,
Please check the following post's last update .
Metadata fields sizes
Thanks
Srinath

Adding a Date Field to a Report Painter

Hi,
Could someone please throw light on adding a date field (for example, scheduled finish date of network) to a report painter report? I don't think this field (or any date field for that matter) is available as a characteristic for report painter.

Hi Mahesh,
i'm in the process of making a similar change,
copying to a ZPROGRAM is not so difficult, but as i told you you have to add your new field to VBMTV structure, and copy the includes that you need to change,
P.S. Note, when you copy you have to change some SELECT statements where
it's selecting from T180V table based on sy-repid, you hav to change sy-repid to SAPMV75A, as there's some configuration done for this.
Regards,
Raghavendra

GRN Document Date / Posting Date Field Mandatory or Freeze

Dear All,
We have four Company Codes with single Chart of Accounts. we required to make GRN Document Date / Posting Date Field Mandatory or freeze on current date for only one Company Code. Can it be possible through Standard Configuration?
Regards,
Majid Khan

what exactly we say Document Date & Posting Date
Just type in google difference between document date and posting date and execute. You will find lot of threads discussed on this topic. Please dont post any query without searching the forum or google.
G. Lakshmipathi

Business Partner Creation/Display - General Data fields are missing

Hi,
We have an issue in our ECC6.0 system. In FPP1/FPP2/FPP3 transactions General data fields such as Driver's license, SSN, Employee class are missing under Identification tab. But the same are displayed in BP transaction code. What configuration would causing this issue.

I found a SAP Note 844949 which is talking about the same kind of issue. As per the note I regenerated subscreen containers for application object BUPA.
Call transaction BUSP and generate the subscreen containers for the application objects BUPA, FICA and BUPR. To do this, set the "All screens" indicator under "Generate All Screens or Just Selected Screens".
If this does not correct the incorrect display, use transaction BUPT for the business partner or transaction CAWM for the contract account to make sure that the fields are not missing due to the field modifications. (If you cannot call these transactions, exit the SAP Easy Access menu by using /n and then call BUPT or CAWM.

WAD - Best way to layout master data fields for a single record

I am creating an employee profile which will be fed from various InfoProviders in BI. I am going to lay it out so that there is a master data section at the top and then below there will be various histories (salary, job, etc) and everything will be populated by the value of a single variable.
The question I have is what is the best way to lay out about 20 master data fields in the top section and have it look nice? My guess (and I am not fond of the tedium) is to create a bound text for each of them and bind it to the appropriate characteristic. Then just have the variable setting affect all of them.
Anyone have any other ideas?

Hello,
you can use the interface command:
storm-control unicast level 10.00
or
storm-control unicast bps 10000000
The first command will limit bandwidth to 10% of what is available, the second will limit bandwidth to 10Mbps, effectively achieving the same thing.
Check this link to the relevant configuration reference:
Configuring Storm Control
http://www.cisco.com/en/US/products/hw/switches/ps5023/products_configuration_guide_chapter09186a00802c10bc.html#wp1063295
HTH,
GP

Data Origin Configuration path in IMG for Plant Maintenance

PM Experts,
Could anyone tell me the path where in IMG the "Data origin configuration lies" under Plenat maintenance and Customer services and the steps to be followed for deactivating this functionality. I do not know how this Data transfer across objects is happening..
Is this standard SAP behavior of the system.
Thanks in advance
Murad

Mishraji
The option u said me , I tried in DEV environment but it doesnt work like that. Evry time I chnaged the FL of an equipment, I click on the Instal with transfer button and find that the radio buttons in the screen for data transfer are not according to my previous set up but accoring to its default setting as it was. Also If I try doing the FL Change for same equipment also, evry time I do the change , the radio buttons arrrangements are the same.
So it means we have no other way out, rather follow the selection methodof reqd fields everytime we transfer data.
Murad Shaikh
Thanks in advance..

No message for validation error "format", type "date", field "date-expired"

Dear
Guys,
i am getting the following error : ((No message for validation error "format", type "date", field "date-expired"))
When trying to upload adobe connect 7 license to the adobe connect 7 configuration wizard. the problem occurs because my server was install on Arabic Saudi Arabia date format while installation, but if i change the windows date format to US then the problem still occurs, and formatting windows is not possible, could anybody help??
Regards

Thank you for replying,
No i am not on host mode, a have installed it deferent times ago successfully, but the only problem now is that during the installation windows server 2008 the default language, time and date. Was set Arabic Saudi Arabia. And even changing it does not solve the problem, as i mentioned above.

IT0002 Data Field configuration

Similar Messages

Maybe you are looking for