IT0015: MORE THAN ONE KILOMETRE IN A MONTH

When we create more than one kilometre claim in the same month, the rate is incorrect.
Create a kilometer claim for 24/04. In the amount field is the total(300) for all kilometres, in the number field the total kilometers(100).
Create a kilometer claim for 04/04. In the amount field is the total(300) for all kilometres, in the number field the totalkilometers(100).
The payroll calculate the rate in rule W015(function P0015) for each entry in info type 0015.
This are then add to the input table. Because it is the same wage type, the IT table will only have one wage type.
The amount, number and rate are the total of the 2 wage types in IT0015.
Because the system calculate the rate for each row in IT0015, then add to IT the rate in this case is 6.00 in stead of 3.00.
If I put the enddate in the assignment number, the rate is correct, but the enddate can be the same for both wage types, then the rate will still be 6.00.
Any Idea how I can solve this problem.
Regards
Frances

Is the problem in the Results Table (RT) or in the Remuneration Statement (as implied by some of your replies) ?
If you can't get PCR W015 to generate 2 distinct lines in the Input Table, I would suggest that you modify the WT's parameters (in T511) so that it would accept only a number (no amount).
Then, create a new PCR (to be called by function PIT) to process the KM WT in the Input Table, where you could "reset" the Rate according to a constant from V_T511K and make the multiplication (MULTI RNA) to generate the Amount.
An other alternative is to start processing by a query on a temporary variable that will be created during processing. If the temp.var. exists, then you zero out the Rate (ZERO= R ) before transfering the calculation results to the Input Table, but if the temp. var. does not exist, then you create the temporary variable before transfering the calculation results to the Input Table. When the WT merges, only one has a Rate, and all Numbers and Amounts are totaled.

Similar Messages

Upgraded to iOS 6 and now I can't open anything in the kindle app? I have to say that I have had my ipad3 for 6 months and intensely dislike the problems with using it. Also is there any way of opening more than one screen as it is hopeless otherwise?

I Have had my iPad for 6 months as I cannot access my work emails using windows. I have to say that it is the most unhelpful device I have ever used and although it looks like there isn't an answer for some of the questions I have asked below, I thought I would try!
1) I have upgraded to ios6 and the kindle app will open but crashes and disappears when I try to access a book?
2) is there any way I can open more than one page at a time, as opening one at a time is hopeless?
3) Is there any way you can replicate the right click function on word? As pasting and copying on the iPad is irritating to say the least!
4) why can't my Samsung 11 phone connect to my iPad via Bluetooth? A they can't seem to 'see' each other? I may have turned a setting off when I was recently abroad and didn't want huge roaming charges.
5) Why do the submit buttons on some websites not work and how can I get them to? I never have a problem with windows, but it is often a problem with the iPad.
6) I have several websites which I have built and usually upgrade on the windows desktop, usually through Internet explorer, but I can't access the sites properly on the iPad (I can see them but can't alter them) and when sending emails through the websites they won't show the page and I can't navigate the page (the size of the email page is bigger than the iPad screen, but I can't either shrink the page to size or move the page around as you normally would on the pad, any ideas?
7) finally, when roaming abroad recently, I had no problems using the wifi, but when trying to use the cellular data (using the roaming function) I could not get it to work? The ipad seemed to be connected to the network with no problems, but wouldn't actually update the emails? I tried turning it on and off, but that didn't make a difference. My kindle and mobile phone (both also on 3G ) worked great, it was just (as usual) the ipad playing up.
8) when wanting to alter part of a sentence, I can't always get the cursor in the right place? Sometimes it is simple the wrong line, but often it will only go at the end or start of a word and not where I want it. Is there any way of making it more exact? Again I never have a problem with moving the cursor on windows, either by mouse or on the touch screen function on windows 7. Any ideas? As after pressing the screen multiple times I just want to throw it out of the window!
IT might just be that I don't have the correct settings (I am a technophobe) but I absolutely hate the iPad and only have it for work emails, it is so annoying that I can get my mobile phone and kindle3g to work fine, but always have problems with the iPad. I am sure it could be good (and for reading emails on the go in the uk it is great, as I like the key board) but it just seems to make everything else difficult.
i Hope you can help and sorry for asking questions others have, but I am just hoping that something new might have been developed!
thanks,
K
Message was edited by: K Paton

1) I have upgraded to ios6 and the kindle app will open but crashes and disappears when I try to access a book?
Try rebooting your iPad, that should fix he issue. I that doesn't work, delete the app and re-download it. The Kindle books should all be in he Kindle cloud services and you can get them again. I have an iPad2 w/ Kindle app and it works just fine - no issues.
2) is there any way I can open more than one page at a time, as opening one at a time is hopeless?
Page as in a kindle book way? turn iPad to landscape position from portrait position. If, however, you mean open more than one application at a time, then no. And not hopeless, as it takes a bit of time to get used to, going from a desktop/laptop format to tablet format.
3) Is there any way you can replicate the right click function on word? As pasting and copying on the iPad is irritating to say the least!
It's actually fairly easy. Press down on the word, then you can expand by drawing your finger to cover word/sentence/paragraph/page, hit select or select all then it gives you the option to cut, copy, paste, define. If you want to use a word processing app on the iPad, Pages is a good application.
4) why can't my Samsung 11 phone connect to my iPad via Bluetooth? A they can't seem to 'see' each other? I may have turned a setting off when I was recently abroad and didn't want huge roaming charges.
It's the connection on your phone. Samsung Galaxy SII? Android software? What you have to do is go to the phone's settings and connect via wireless, not Bluetooth. Go to System Settings (on phone) and under Wireless and Networks click 'more' and go to the Tethering and Portable Hotspot option. Set up your mobile wifi hotspot, name it though it will probably come up with 'AndroidAP', choose a WPA2 security level and put in a password. Go back to previous screen and turn on 'Portable Wi-Fi Hotspot' box. Then on your iPad in the Settings - Wi-Fi section, it should then recognize your phone for tethering. If it's a Windows Phone 7, I don't know the layout of that software, but presumeably similar.
5) Why do the submit buttons on some websites not work and how can I get them to? I never have a problem with windows, but it is often a problem with the iPad.
Sometimes the issue is with the website design, not all websites are optimized for mobile devices - not just iPad but also Android devices. It happens. They're getting there, but occasionally the page might need a refresh.
6) I have several websites which I have built and usually upgrade on the windows desktop, usually through Internet explorer, but I can't access the sites properly on the iPad (I can see them but can't alter them) and when sending emails through the websites they won't show the page and I can't navigate the page (the size of the email page is bigger than the iPad screen, but I can't either shrink the page to size or move the page around as you normally would on the pad, any ideas?
It depends on what you use to build the websites on the computer. Recommend a free program on the computer called CoffeeCup Free HTML Editor. I don't recommend using IE period; Firefox or Chrome are my choices on Windows machines. I have two websites that I manage, both using this program. I'm assuming that when you mean you can't access the sites on the iPad you mean to update them? Ostensible there are apps to let you do this. What format are the sites? Without seeing what exactly you mean and what you want to do, it's hard to explain.
As for seeing full page while emailing within a site, turn iPad to portrait mode, and try to finger-pinch touch the screen to see if that will bring the fuller page into view. Other option is opening a second tab with same website and just go between tabs to reference material.
7) finally, when roaming abroad recently, I had no problems using the wifi, but when trying to use the cellular data (using the roaming function) I could not get it to work? The ipad seemed to be connected to the network with no problems, but wouldn't actually update the emails? I tried turning it on and off, but that didn't make a difference. My kindle and mobile phone (both also on 3G ) worked great, it was just (as usual) the ipad playing up.
If you were outside the US or Canada, my guess is the problem lies within the SIM card in your iPad. If you were outside North America, there are different band levels - I'm guessing you have a SIM thats locked to a particular provider. Band level frequencies differ per country/continent, so a SIM card that will work in Canada/US will not likely work in UK/Europe/Asia/Australia, etc. you will be able to get your emails again when back on a wifi network. Mobile phone may have a different type SIM card (GSM/HSPA) from your iPad SIM. Also, check your email settings.
8) when wanting to alter part of a sentence, I can't always get the cursor in the right place? Sometimes it is simple the wrong line, but often it will only go at the end or start of a word and not where I want it. Is there any way of making it more exact? Again I never have a problem with moving the cursor on windows, either by mouse or on the touch screen function on windows 7. Any ideas? As after pressing the screen multiple times I just want to throw it out of the window!
Moving the cursor on a sentence is a matter of putting your finger on the screen where you want it. It's exceptionally easy to do. I'm using the Notes app to write this whole segment and I just need to put my finger where I want to change things and presto it's ready for me to change where I want it.
Here's a solution: sell your iPad (after you wipe your data off it) to someone who will appreciate it, and put your money towards the Windows Surface Tablet out later this year/early next year, where you can (reportedly) connect a mouse to it. It will have some of the Windows 7/8 functionality that you're more familiar with, or get a netbook.
- Ceridwyn2

On my iPad 3, how do I make calendar items lasting more than one day appear as such on the monthly view of my calendar? Right now only the first day of the item appears.

On iPad 3, all of my calendar items lasting more than one day do not appear correctly when looking at the monthly view of the calendar; only the first day of the appointment appears. For example, if I am taking a vacation for 4 days, only the first day of the vacation is marked on the calendar, instead of being listed on all 4 days. When I look at the weekly view, however, it is correct and is listed on all 4 days. The problem here of course is that at a glance, there is no way to look at my monthly schedule. On my iPhone, everything is correct, regardless of month or week view, so clearly this is an iPad problem I guess? Please advise on how this can be corrected. Thank you!

Unfortunately you can't do what you want. Many people have complained to Apple about this. I suggest you provide Apple feedback directly at http://www.apple.com/feedback/macosx.html. They will not provide a direct response but hopefully if enough people provide feedback Apple will fix this.

Date Control should highlight more than one range of dates in a month.

Hi All,
Date Control should highlight more than one range of dates in a month.We are creating a web interface for PR01 ( Travel Management Module ) , in a month a traveller can have more than 2 trips and we need to highlight all the travel date ranges in the Web DynPro date range control.
Thanks & Regards
Gaurav Jain

Hi Thomas,
I used DateNavigatorLegend and DateNavigatorMarking and did not give any default value or context mapping to the DateNavigator element.
The DateNavigator is now highlighting only the first dates of the ranges that I have created in the WDDOINIT method.The DateNavigatorMarking takes only one date not 2 dates in the properties So kindly suggest how to display multiple date ranges.
Thanks & Regards
Gaurav Jain

Ical crashes when I go to a date more than one month forward.

ical crashes when I go to a date more than one month forward.

The extension called Stop Autoplay isn't available from AMO any longer, it was probably pulled by the original author. <br />
http://kb.mozillazine.org/Muting_browser
It looks like it is available here: <br />
http://mac.softpedia.com/progDownload/Stop-Autoplay-Download-31767.html

I am considering buying Acrobat 11 Prio on a monthly subscription but I would like to use it on more than one machine is this possible?

I am considering buying Acrobat 11 Prio on a monthly subscription but I would like to use it on more than one machine is this possible?

You are allowed to have two working installations so if you want to have it on two machines you can. If you want it on more than that then you need to manage which ones are working at any given time such that only two are usable.

On some pages the text from more than one paragraph stack up on top of each other, like writing something then writing something else on top of it.

On some pages the text from more than one paragraph stack up on top of each other, like writing something then writing something else over the top of it. Some pages will run text and pictures together, like a car rear-ending another or a train pile up. Other pages will cut an image or text short, i.e. it will display a portion of the top of the image or text but not the rest. This happens on Amazon for example, the section where it says "Customers who looked at this also looked at" will allow only a certain amount of the upper portion of the description immediately below the picture of the product but below that section everything is fine until I get to another section displaying more products and their descriptions and then it cuts the bottom portions off again. I've noticed this behavior mostly in the sections with product photos, the text sections seem okay. YouTube also displays this behavior. It's even doing it on this page right now. Below this box I can read "The more information you can provide the better chance your question will be answered " , but directly below that in the next sentence I can see the start of it with "Troublshootin" and the "Automatically Add" in a green field covering the "g". The next clear text is "A window will open in the top corner. Click Allow, and then click Install. If the automated way doesn't work, try these manual steps." I tried turning of pre-fetching, clearing history, cookies, and cache, scanning for malware with Avast and Windows Defender all to no avail. It began when I upgraded from dial up to DSL via AT&T Uverse. I have a Motorola NVG510 modem. The modem was replaced an hour ago along with new dedicated lines and DSL/Phone splitter from the box by an AT&T technician to make sure my incoming lines were up to par. He ran a connection test and verified everything is up to standards. IE does not display this behavior. I am running Firefox20.0.1 and all previous versions have acted the same way since I upgraded to DSL about 3 months ago.

If you have increased the minimum font size then try the default setting "none" in case the current setting is causing problems.
*Tools > Options > Content : Fonts & Colors > Advanced > Minimum Font Size (none)
Make sure that you allow websites to choose their fonts.
*Tools > Options > Content : Fonts & Colors > Advanced: [X] "Allow pages to choose their own fonts, instead of my selections above"
It is better not to increase the minimum font size, but use an extension to set the default page zoom to prevent issues with text not being displayed properly.
You can use an extension to set a default font size and page zoom on web pages.
*Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/
*NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/

Macbook Pro mid 2012 starting to lag when running more than one program.

Firstly mah specs :
Retina, Mid 2012
2.3 GHz Intel Core i7
8gb 1600 MHz DDR3
NVIDIA GeForce GT 650M / Intel HD 4000
OS X 10.8.4 (12E55)
So, i bought this macbook about a year and a month ago and since i bought it everything has run fine, it has always been fast and smooth, until around 2 months ago when it started getting a little laggy in handling more than one program being open. Before this i was able to run Photoshop, Cinema 4D, Second Life and Chrome all at once and recieved no speed decrease what so ever. So i figured that it must just have been a little clogged up maybe, honestly wasnt sure but tried clearing cache, tried freeing up memory with some of the mac memory management tools from the App Store and non of these worked so in the end i backed up what was important and wiped the HD and re installed the OS. Annoyingly i am still having problems, if i have Photoshop open and i am surfing chrome it lags on scrolling web pages or loading links. If i have Second Life open i seem to lag with more than 3 players around me quite badly, even if i put Second Life onto its lowest Graphic Settings i still lag where as before i had this issue i could run it on its highest Graphic Settings and recieve little to no lag what so ever. This happens for most programs that used to run smoothly, if i now open Cinema 4D and try anything else.....the system slows down.
I COULD take this to the apple store and genuis bar and ask them to have a look at it HOWEVER i am back at Uni in 2 weeks and i need the macbook for my studies as i am currently working on a summer project and need it for research, can any of you Mac Wonders out there suggest anything else for me to try. I have checked the HD and it says its not failing and is verified and found no issues with the partition.

First, back up all data immediately, as your boot drive might be failing.
There are a few other possible causes of generalized slow performance that you can rule out easily.
Reset the System Management Controller.
If you have many image or video files on the Desktop with preview icons, move them to another folder.
If applicable, uncheck all boxes in the iCloud preference pane.
Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
Check your keychains in Keychain Access for excessively duplicated items.
Boot into Recovery mode, launch Disk Utility, and run Repair Disk.
If you're booting from an aftermarket SSD, see whether there's a firmware update for it.
Otherwise, take the steps below when you notice the problem.
Step 1
Launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
Select the CPU tab of the Activity Monitor window.
Select All Processes from the menu in the toolbar, if not already selected.
Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
Next, select the Disk Activity tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in and Writes out.)
Step 2
If you have more than one user account, you must be logged in as an administrator to carry out this step.
Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Select the 50 or so most recent entries in the log. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

How can I put more than One ComboBox in the Driving Frame of a Frame Driver

Hi,
I am working with a Frame Driver and I want that in the Driving Frame put more than one ComboBox to filter the report, for example, I want to put one combobox for City, another for Year, and another for Month, and when the user select the City, Year and Month and do click in Submit button, then in the Target Frame appears the information for those filters.
Does anybody know how to do that?
Thanks a lot.
Bye,

Hi,
It is not possible to have more than one combo in the source frame. This is because frame drivers can take only
two columns in the sql query, one is the display value and the other the return value.
Thanks,
Sharmila

Can I have a photo in more than one event?

I understand that it is normally not possible to have one photo in more than one event at a time.
I am quite careful about arranging my photos into events logically, but find in my library tere are several events called [Date] Photo Stream, which I've not delivberately created. It appears that in many cases the photos these Photo stream events contain are also in other events.
Can anyone tell me what is going on here? Can I safely delete the Photostream events and their contents?

To have a photo in more than one Event it must be duplicated and the duplicate added to the other Event. A photo can be in multiple albums, books, slideshows without having to duplicate the photo as those use pointers to the original photo.
At the beginning of each month new photos in the Shoto Stream are imported into an Event with the month and year as the Event name. All photos taken that month are added to that Event. That's because the iPhoto/Photo Stream preferences are set to auto import photos taken by your mobile devices:
Events are basically buckets of photos based on the date taken and how you've setup iPhoto's preferences for importing photos:
Merging Events can change the location in the resulting event among the other events due to the variety of dates of the photos.
OT

More than one view with iphone SDK.

Hi
I'm trying to make more than one view in Interface Builder and then switch between them in xcode. But I can not figure it out.
I tryed reading guides, watching tutorials, but with no luck.
Can anyone here give me a small tutorial on how do that?

Your best bet is to look through the code (and xib files) distributed by Apple. I was in much the same position a couple of months ago, except my expertise was in JEE. It is really not that difficult to get going. Just a regular Cocoa development book can also help you (it helped me understand how to get going).
Here is what you will start with
ApplicationDelegate - Will be connected by default in your primary xib file. For simple applications that is all you need. If you need multiple views, you can still make the primary nib file you primary view and lay it out as you need. Add methods as appropriate to remove current view and display next view you want.
Xxx.nib - Your primary xib file. Layout out as required. Create a UIViewController and connect to the File's Owner. That connects your controller to the view. Make connections to the view components in the xib file, event handlers etc. It is not difficult, but IMO IB is not very intuitive, though you will get the hang of it very quickly.

Is there a datatype that allows me to store more than one item at a time

Hello Everyone,
Is there a datatype that allows me to store more than one item at a time , in a column in a row?
I have to prepare a monthly account purchase system. Basically in this system a customer purchases items in an entire month as and when required on credit and then pays at the end of the month to clear the dues. So, i need to search the item from the inventory and then add it to the customer. So that when i want to see all the items purchased by a customer in the current month i get to see them. Later i calculate the bill and then ask him to pay and flushout old items which customer has purchased.
I am having great difficulty in preparing the database.
Please can anyone guide me! i have to finish this project in a weeks time.
Item Database:
SQL> desc items;
Name Null? Type
ITEMID VARCHAR2(10)
ITEMCODE VARCHAR2(10)
ITEMPRICE NUMBER(10)
ITEMQUAN NUMBER(10)
Customer Database:
SQL> desc customerdb;
Name Null? Type
CUSTID VARCHAR2(10)
CUSTFNAME VARCHAR2(20)
CUSTLNAME VARCHAR2(20)
CUSTMOBNO NUMBER(10)
CUSTADD VARCHAR2(20)
I need to store for every customer the items he has purchased in a month. But if i add a items purchased by a customer to the customer table entries look this.
SQL> select * from customerdb;
CUSTID CUSTFNAME CUSTLNAME CUSTMOBNO CUSTADD ITEM ITEMPRICE ITEMQUANTITY
123 abc xyz 9988556677 a1/8,hill dales soap 10 1
123 abc xyz 9988556677 " toothbrush 18 1
I can create a itempurchase table similar to above table without columns custfname,csutlnamecustmobno,custadd
ItemPurchaseTable :
CUSTID ITEM ITEMPRICE ITEMQUANTITY
123 soap 10 1
123 toothbrush 18 1
ill just have it as follows. But still the CUSTID FK from CustomerDB repeats for every row. I dont know how to solve this issue. Please can anyone help me.
I need to map 1 customer to the many items he has purchased in a month.
Edited by: Yukta Lolap on Oct 8, 2012 10:58 PM
Edited by: Yukta Lolap on Oct 8, 2012 11:00 PM

You must seriously read and learn about Normalization of tables; It improves your database design (at times may increase or decrease performance, subjective cases) and eases the Understanding efforts for a new person.
See the below tables and compare to the tables you have created
create table customers
customer_id       number      primary key,
fname             varchar2(50) not null,
mname             varchar2(50),
lname             varchar2(50) not null,
join_date         date          default sysdate not null,
is_active         char(1)     default 'N',
constraint chk_active check (is_active in ('Y', 'N')) enable
create table customer_address
address_id        number      primary key,
customer_id       number      not null,
line_1            varchar2(100)   not null,
line_2            varchar2(100),
line_3            varchar2(100),
city              varchar2(100)   not null,
state             varchar2(100)   not null,
zip_code          number          not null,
is_active         char(1)         default 'N' not null,
constraint chk_add_active check (is_active in ('Y', 'N')),
constraint fk_cust_id foreign key (customer_id) references customers(customer_id)
create table customer_contact
contact_id        number      primary key,
address_id        number      not null,
area_code         number,
landline          number,
mobile            number,
is_active         char(1)   default 'N' not null,
constraint chk_cont_active check (is_active in ('Y', 'N'))
constraint fk_add_id foreign key (address_id) references customer_address(address_id)
create table inventory
inventory_id          number        primary key,
item_code             varchar2(25)    not null,
item_name             varchar2(100)   not null,
item_price            number(8, 2)    default 0,
item_quantity         number          default 0,
constraint chk_item_quant check (item_quantity >= 0)
);You may have to improvise and adapt these tables according to your data and design to add or remove Columns/Constraints/Foreign Keys etc. I created them according to my understanding.
--Edit:- Added Purchases table and sample data;
create table purchases
purchase_id           number        primary key,
purchase_lot          number        unique key not null,     --> Unique Key to map all the Purchases, at a time, for a customer
customer_id           number        not null,
item_code             number        not null,
item_price            number(8,2)   not null,
item_quantity         number        not null,
discount              number(3,1)   default 0,
purchase_date         date          default sysdate   not null,
payment_mode          varchar2(20),
constraint fk_cust_id foreign key (customer_id) references customers(customer_id)
insert into purchases values (1, 1001, 1, 'AZ123', 653, 10, 0, sysdate, 'Cash');
insert into purchases values (2, 1001, 1, 'AZ124', 225.5, 15, 2, sysdate, 'Cash');
insert into purchases values (3, 1001, 1, 'AZ125', 90, 20, 3.5, sysdate, 'Cash');
insert into purchases values (4, 1002, 2, 'AZ126', 111, 10, 0, sysdate, 'Cash');
insert into purchases values (5, 1002, 2, 'AZ127', 100, 10, 0, sysdate, 'Cash');
insert into purchases values (6, 1003, 1, 'AZ123', 101.25, 2, 0, sysdate, 'Cash');
insert into purchases values (7, 1003, 1, 'AZ121', 1000, 1, 0, sysdate, 'Cash');Edited by: Purvesh K on Oct 9, 2012 12:22 PM (Added Price Column and modified sample data.)

Don't have more than one backup available on Itunes?

So I use Windows 8 and am having issues with backing up my Iphone 6.
When I go to backup it up on Itunes, the backup I create overrides the old one. Going into "Restore Backup" I can't find any older/additional backups than the most recent one.
Wondering if this is something I've toggled or can fix to allow creation/viewing of more than one older Backup at a time.
Any ideas?
I've looked here but couldn't find a solution: Create and delete iPhone, iPad, and iPod touch backups in iTunes - Apple Support
In,
:\Users\(username)\AppData\Roaming\Apple Computer\MobileSync\Backup\
I only have 1 file again, which's title and contents are just random letters and numbers rather than the name of my Iphone.

Indeed, sadly there is no way back to older backups if you haven't created the,. I use the option to prevent devices syncing automatically as I think this presents a risk when you want to fix a problem by restoring only to have the backup automatically updated when you connect the device. I try to run a backup then immediate restore cycle every few months so that should the worst happen I might not lose too much. I also have my library cloned to two different computers each of which have separate backups for my device which gives yet more resilience to a disaster.
tt2

How to exclude one or more than one member on report?

Post Author: izhar
CA Forum: WebIntelligence Reporting
Hi all group members, I am working on BOXI R2. I have to ask that, How to exclude one or more than one member from the report. I know there is function of filter, through which we can see our desired members and other remaining will be excluded, but that's filter. In some of tools i have seen just do right click on a specific member and click on "Exclude" option to exclude the member. Suppose i have placed a Time dimension on the report and standing on "Month Level" which has data from 1, 2, ... 7,8, ... 11, 12 Now i just have to exclude member 7 from the report. Can any member guide me here. Regards, Izhar

Post Author: jsanzone
CA Forum: WebIntelligence Reporting
Izhar,
If you run the report in "modify" mode, then you have two options
1) You can click on the "Show/Hide Filter Pane" button which opens up the "apply filter" pane. From there you go to your Data panel and grab, drag, and drop an item from the Data panel into the apply filter pane and provide a constant or select a value to filter in or out from your report.
2) You can highlight the column of data that you want to filter on, then click on the "Add Quick Filter" button. Using the List of Values menu you either select one or multiple items that you want to include in the report.

When texting with more than one person at a time the incoming text scrolls to top of the conversation. anyone out there with the same issue?

while texting with more than one person at a time the incoming texts scrolls to top of conversation. anyone having this issue?

I've heard claims it can be done, claims some have done it, and claims that it didn't work for them. This thread is interesting, some indications it should be possible, complaints that it didn't, and also an interesting work-around:
"How do I text message multiple people at once?"
http://discussions.apple.com/click.jspa?searchID=-1&messageID=4822260
You can ask Apple for iPhone changes via this link:
http://www.apple.com/feedback/iphone.html
Though if you're requesting hardware changes for iPhone v2 you may want to wait a week (or a month?)...they're probably going to be inundated right now by requests for software changes to the current iPhone.
(If this has answered your question, please mark your original post as answered)

IT0015: MORE THAN ONE KILOMETRE IN A MONTH

Similar Messages

Maybe you are looking for