IT0016

Hi,
in infotype 0016 , i m not able to see the F4 help for the EE notice period
EE , ER notice period not showing all the entry in table T547T
what is the reason for this

Hi Nutan,
There might be two reasons
One is u need to configure in T547T in SPRO
Other thing might be your F4 option might not be working correctly for this u need to once again reinstall SAP LOG ON PAD.
Regards,
Ravi

Similar Messages

  • Use of field EINDT - Initial Entry & Feature ENTRY in IT0016

    In which way we can use feature ENTRY ?
    Thanks in advance

    Hi
    The thing that you are asking is Initial Entry in IT0016 - right
    That is the date for that employee started working, means his hired date.
    I hope you got your answer.
    Bhaskar

  • Defaults for IT0016 for China in ECC 6.0 Version

    Hi Friends,
    Greetings to All !!
    I have a requirement to default the values (Contract Type, Probationary period, EE & ER Notice Period) in IT0016 for China in ECC 6.0 Version. We tried to create these defaults through CONTR feature, but failed to achieve the solution.
    Actually, MP001600 screen is been replaced by MP321100 for China in the upgraded version of ECC by SAP.
    Could anyone help us with the solution, how to create defaults for this infotype 16 for China in ECC 6.0 (for screen MP321100)....
    Thanks in Advance,
    Regards,
    P Sai Narayana

    Yes Mr. Kumarpal,
    SAP has provided new screen MP321100 for China in ECC 6.0. If you want further details, please check in the SAP Note 1286584.
    Because of this new change, CONTR feature is not working properly, as expected for china. Please find the details of the Note below.
    SAP Note 1286584 - CN IT0016: Old Notice Period Information Are Not Displayed
    Summary
    Symptom
    After the legal change for China New Labor Contract Law, the Contract
    Element Infotype (IT 0016) for China start using a new screen. The
    Employer/Employee Notice Period fields are chaged to number and unit input
    instead of the old code/description input. This is required for payment in
    lieu of notice calculation.
    The old fields are no longer displayed in IT 0016 for China. However
    customer had maintained information in the old notice period fields might
    need them as a reference to update the new fields.
    More Terms
    Notice period, IT0016, Contract Management
    Cause and Prerequisites
    This is an enhancement of the screen.
    Solution
    Apply the HR support package or the correction instruction of this note.
    The old notice period fieds (P0016-KDGFR and P0016-KDGF2) are drawn on the
    screen as invisible fields. Customer can update the setting in maintenance
    view V_T588M for module pool MP321100 to set the fields as "Optional
    Fields". Thus these two fields can be shown on IT 0016 screen.
    Thanks,
    Sai
    SAP HR Consultant

  • IT 0480 created while creating IT0016 for Spain

    Hi Colleagues,
    This is issue specifically related to Spain.
    Whenever we create IT0016 for Spain employees, I'm getting the error "DBIF_RSQL_INTERNAL_ERROR" which says cant access database table PA0480. i guess whenever we create iT0016 for spain, IT0480 also gets created as this Infotype cant be maintained through PA30.
    I checked Dynamic Action but there is nothing written for this in IT0016. Can you tell me where to stop this automatic creation.
    Regards,
    Navneet.

    Hi Navneet,
    The following Wiki page may be helpful:
    http://wiki.sdn.sap.com/wiki/x/MBfHC
    you may also check user exit ZXPADU01.
    Regards,
    Li

  • IT0016 Feature CONTR, MPV34300

    Hi Experts,
    We're currently faced with this situation in IT0016 wherein, we would like to remove the value defaulting in the Notice Period for ER...
    LA/LE - 2A/2E - PA/PE - KF - KA - CT being the standard, our current value is --> / - / - 3/012 - _ - 10 - 01
    3 months proby period and 1 month notice to EE, notice to ER is left blank but the PA30 screen for IT0016 is defaulting the same value as the "notice to EE"...
    We're using module pool MPV34300/2000 instead of the standard IT0016 module pool MP001600/2000... Doesn't feature CONTR control MPV34300? Is there anyway we can remove the defaulting even if we're using MPV34300?
    Thanks!

    recently we had long discussions on similar issues with IT 0016
    Re: How to hide fields in Infotype 16 for Molga 28
    Re: IT0016 issues with IVWID
    please go through the above threads and see if they help.
    These would have come up if we had searched in the forum for IT 0016.

  • Delimit Contract type in IT0016

    Dear Geeks,
    My customer wanted remove few Contract type in IT0016. However, he do not want to delete. Just, the Contract types should not be listed in the drop down list while creating new records and the records already created should be available for reporting.
    Pls advice on how to go about it.
    Thanks,

    Dear Carlos & Wilfred.,
    Thank you for your inputs.
    We do not want to hide the field. There were 30 contract types, in which most of them (say 20) were not in use now. Hence, we need to make only 10 available for the end user to choose from. Is User Exit the only way?
    Thanks,
    Edited by: Bijju S on Dec 4, 2010 5:37 AM

  • How to set default value on IT 9016 - (Copy of IT0016)

    Hi,
        For a particular business requirement, I've copied Infotype 0016 to 9016.
        Now I wanted to set some default values for the values like probationary period, KDGFR and KDGF2.
       Regarding the infotype 0016, I've set the default values using the Tcode PE03 and CONTR.
      since this a custom infotype, Is there anyway to set the default values?
      Presently I set the default values by hardcoding in the module program since it is custom one.
    Thanks in advance.
    Regards
    Narasingam. B

    Hi Bala,
    Yes you can set via dynamic action. See below line entry in dynamic action for calling custom infotype after IT2001 and AWART field value from IT2001 should store in ZAWART field in custom infotype IT9331
    2001                   06     78           ***CALL 9331 & 9361 FOR RU ***
    2001                   06     80     P     T001P-MOLGA='33'
    2001                   06     82     P     PSPAR-TCLAS='A'
    2001                   06     84     I     COP,9331,,,(P2001-BEGDA),(P2001-ENDDA)
    2001                   06     85     W     RP50D-FLAG1='X'
    2001                   06     86     W     P9331-BEGDA=P2001-BEGDA
    2001                   06     88     W     P9331-ENDDA=P2001-ENDDA
    2001                   06     90     W     P9331-ZAWART=P2001-AWART
    Hope this will help.
    Regards,
    Purnima

  • BAPI to pull IT0016 CONTRACT details

    hi all,
    i need to pull details of contact elements
    using a BAPI,the bapi BAPI_HRMASTER_SAVE_REPL_MULT cannot give me that output. any ideas are appreciated??
    thanks in advance!

    Hi Biswajit,
    we r trying to pull data remotely outside SAP so we r using only BAPI's not funct Mods.
    as suresh suggests maybe we need to do some workaround.
    thanks both of u.

  • Not giving warning or any alert IT 0019 and IT0016

    Dear Experts,
    Through the monitoring task infotype 0019 we are not getting any alert through our outlook Mail.
    we have configured tat system should monitor the task one month before.
    EX. Probation period
    what can we do for getting alert from outlook mail??
    and also we are maintaining contract elements infotype, there also we are maintaining contract type Ex. one month. and probation period.
    eventhough users not getting any message through the outlookmail.
    what can i do for this.
    please help anyone.
    Kind regards,
    Dinesh

    Dear Sikinder,
    through the dynamic Action can get mail though outlook???
    regards,
    Dinesh.

  • Entry date in blank for limited Contract Type

    Hello,
    I've set up the feature ENTRY with the value EINDT X for my molga, but when I run a hiring action and in infotype 16, in the field Contract Type I use a Limited contract Type, and when I run the report S_AHR_61016362 (Flexible Employee
    Data) the Entry Date Column is in blank but it does not happen when I use Unlimited Contract Type.
    Does anyone can help me?

    Hi,
    This feature provides entry date definition method to function module HR_ENTRY_DATE. In your case it reads following fields from IT0016:
    1. EINDT "Initial Entry"
    2. KONDT      "Date of Entry into Group"
    First of all check that you entered one of these fields for employees with temporary contract.
    Cheers

  • How to hide fields in Infotype 16 for Molga 28

    Hi Guys,
    I need to hide some fields for IT0016 for Molga 28. Earlier we have assigned different screen for this molga .But now we have assigned the standard  screen to IT0016 i.e. View-3211. But when i go to node Change Screen Modifications, i m unable to find MP321100. I have checked through PA30 for chinese employee the Program is MP321100 and screen is 2000.
    COuld you guide how to hide some of the fields for Chinese Molga 28 in IT0016.
    Regards,
    Navneet

    Hi Harish,
    I havent got the chance to check with BASIS yet....they are lil busy .....meanwhile i have created an entry in t588m with Module pool mp321100 and feature p0016. As u told i have created entry with Molga 28 and return key 28 in P0016 feature.
    Could you confirm that i need to Create mP321100 or i could have done it via mp001600 as told by other guy.
    And now if i go the fields are hidden except for two fields which strangely are coming "ER Notice Period" and
    "EE Notice Period". I have hidden all fields still these two fields are cming any idea why?
    Regards,
    Navneet

  • Creation of subtype for IT 0016

    Hi
    When I am selecting IT 0016-Contract Elements in PA30, I am not getting any values in the sybtype field. How can I create subtype for contract ?
    I have already created contract types.
    Thanks
    Rajesh

    Hi Rajesh,
         There are no subtypes for the IT0016, and there is no need of creating Subtypes too. The thing is just click on create button by giving the pernr and  choose the required Contract type that present in the combo box. Thats it.
    PS: Don't forget to reward points if I some how helped you.
    Thanks & Regards
    Hari.

  • Dynamic creation of two records in IT19 from input in IT16

    Hi all
    I am working on a dynamic action to do like this:
    When a person is hired through a PA40 one enters an IT0016 (at this point predefined with probationary period 9), saves and by doing this creates an IT0019 with Task Type "U9" and a date of task 9 months later. This I believe is calculated by adding together the probationary period in IT0016 and the begin date into the variable PROBEND.
    Now the next step in my Dynamic action is a copy of the fist one, creating yet another IT0019 record. Only this time the Task Type is 36 and here comes the trouble: I want the PROBEND for this part of the action to be begin date + 6 months. Question is, can this be done by using a W indicator for the step setting P0016-PRBZT='6' before making the PROBATION routine? I cannot make it work.
    My code is as this (simplified):
    IType 0016, field PRBZT, FC04
    ***first 0019 record ***
    P some tests
    F PROBATION
    I INS,0019,U9
    W P0019-TERMN=PROBEND
    ***second 0019 record ***
    P Some other testing
    W P0016-PRBZT='006'
    F PROBATION
    I INS,0019,36
    W P0019-TERMN=PROBEND
    It DOES make two records - one of each type, but the date of task is not calculated correctly for the second record. Anyone has an idea how to crack this one?
    Regards
    Jesper

    Hi Brother
    I think u r calling the Dynamic action after u save infotype 0016 in both the cases. So how can we save something in an infotype which is just saved, I mean u r using a field of 0016 in the dynamic action,but remember that we are calling dynamic action after 0016 gets saved.
    So for changing the dates in 0016 just play around with CONTR Feature, To default the contrat elements and modify the dynamic action...
    Hope this resolves ur query
    Thanks and regards
    Mohammed Azeem

  • Additional field in IT0109

    Hi All,
    I have added an additional field in IT0109 through PM01.
    But the field is not displaying in PA30, while using infotype 0016.I have created an entry in table T582C for mp001600 and zp010900.
    Please let me know what could be the problem.
    Thanks,
    Bindu.

    Hi,
    You have modified IT0109 and trying to see the data in IT0016. Please check IT0109.
    Sandip

  • MSS - General Information Page - "Contract Text"

    Hello Experts,
    I am having trobule finding out where the field "Contact Text" comes from.  The field is shown on the MSS Page "General Information" on the iView "General Data".  The subheading is "Contract Data".
    I have run a trace on the portal page.  It looks like the page is reading the following infotypes:  0000, 0001, 0002, 0016, 0041, 0105, 0008, 0032, 004.
    I assume the "Contract Text" field would come from IT0016.  However, there is no "Contract Text" field on that infotype.  Can anyone please tell me where this "Contract Text" field comes from?
    Thanks,
    Mike

    The information that is displayed in the field "Contract Text" field is in the Infotype 0001 , field P0001-ANSVH
    Hope this solve you doubt.
    Regards

Maybe you are looking for