IT0022 Education- Is there a Standard work flow for ESS??

Hello All,
is there a standard work flow in SAP where in an employee updates his education details in ESS and a work flow is triggered either to Adminstrator / Manager to approve the same? if aint...how to make this possible, anyworkarounds?
if yes, in what versions is it available/where?
Any help wld be rewarded with Points.
thanks
hrbuddy
**where can i look for standard ESS & MSS related workflows**
Message was edited by:
Hr Buddy

There "IS" a central place where workflows can be accessed in SAP...which i eventually foundout...it is thru Tcode SWDM - Business Workflow Explorer
There we need to check for component that we are looking workflows for....
for example :
EP-PCT-MGR-HR - Business Package for Manager Self-Service (HR)
PA-ES - Employee Self-Service
PT-EV -Time Evaluation
And ofcourse Bus.Pack Documentation is always useful.

Similar Messages

Standard Work Flow for Goods Receipt

Hi All,
I am working on Work flow is there any standard work flow for Goods Receipt?
If so please help me in this regard.
I found a BO BUS2017. Is this right one?
Thanks.
Ranganadh.

hi,
Refer to the link.
Automatic mail sending for goods receipt
Regards
Sumit Agarwal

Standard Work flow for Leave approval in HR module

Hi ,
My query is there any standard work flow available in HR module for Leave approval and Over time approval. We have negative time management and with out ESS and MSS.
Pl suggest if any one has used this earlier with out ESS or EP
Regards
Punit

I can think of the following but not without enhancement for the workflow part.
- Since you are not using ESS, you (leave admin) may create the absence record directly in IT2001 (in LOCK mode).
- In the user exit of 2001 you may trigger your Workflow process (i.e. call the function module to trigger WF here) depending on the LCCK status. You have to explore if standard WF can be used to your requirement.
- Upon approval, you can UNLOCK the absence.
- In the event that UNLOCK is unsuccessful, trigger WF to your Leave Admin for him to update via PA30.
Standard SAP Workflow
- Only 1 level approval
- Using Chief Position
IF your workflow requirement deviates, then you have to also customize workflow, does not matter whether you are using ESS or not.
Finally test and retest to make sure all possible events are covered.
OT is the same, except that you need to use 2007 vs 2002
Edited by: sapuser909 on Nov 18, 2009 12:07 PM

Work flow for Goods issue MIGO_GI

Hi friends,
I want to develop a work flow for good issue MIGO_GI transaction. Is there any standard work flow this scenario.
When I deliver the 4 materials, the Material cost is 100*4 = 400, if the Material cost is greatr than 500, mail should trigger to the manager, if it less it will go to the first approver.
please advice me in this.,
regards,
Ajay

I think no stanadard workflow will provide you with such a validation, Better to design your own customized workflow template,
Follow the below steps.
1. Open PFTC select the task type workflow template
2. Click F5 and define the relevant fields and make the agent assignemnt for the workflow template as general task from the menu addtional agent ---> agent assginement --> maintain --> general task.
3. Check the BOR BUS2017 this might be useful.
Check the method GoodsMovement.SAPCreate and its parameters interface, if you can get the total values of the then include a condition and validate th total cost if is satrisfyies send mail and workitem to approver, if it does not satisfy then send only workitem to approver.
Check the below BADI's
MB_BAPI_GOODSMVT_CREATE        MB_GOODSMOVEMENT
MB_BATCH_MASTER                MB_GOODSMOVEMENT
MB_DOCUMENT_BADI               MB_GOODSMOVEMENT
from where you can trigger your customized workflow by using the standard fm SAP_WAPI_CREATE_EVENT or SAP_WAPI_START_WORKFLOW*

Using work-flow for payment release

Dear Experts
I have a problem when using work-flow for payment release:
I am using ws00400012 as standard work-flow for payment release ,after posting invoice documents via FB60 BSEG is crated but BKPFID dose not exist in container .
when I test this work-flow it is running correctly via SWUS.
It would be very helpful if someone can help me with this problem.
Thanks and best regards,
Azam

http://help.sap.com/saphelp_46c/helpdata/en/6e/1217de9f0411d189b80000e829fbbd/frameset.htm
Goto Accounts Payable (FI-AP) and in that "Vendor Down Payment Processing".
Check out the link for workflow scenarios.. http://help.sap.com/erp2005_ehp_03/helpdata/EN/04/926f8546f311d189470000e829fbbd/frameset.htm
Goto "Archiving Application Data (FI)" and check if your scenario exists or not !!!
Regards,
PR.

Trigger Work Flow for payment release

hi guys,
kindly help me how to trigger the standard work flow for Payment release ((WS00400012).
With Regards
Pradeep N

enter the Workflow
in SWDD : WS00400012
click on Agent Assignment and assign the Approver USer ID.
click on the event linkage and activate and save.

SAP STANDARD RETRIGGER WORK FLOW FOR SC CHANGES -SRM 550

Hello ALL
assume that we use any standard sap WF templates
SC created
SC awaiting for manager approval
now requester changes any piece of data . will work flow retrigger ( again workitem created) for any cosmetic changes upon standard work flow templates used?
what are the actions on shopping cart will retrigger the workflow
now sc is awaiting for approval but below actions done by REQUESTER in the shopping cart
1. changing sc descrition name?
2. notes for approval?
3.change qty /price /uom/ pg /product changes/ cost center changes /add attachment
4.changing vendor
please share what are the above actions will retrigger the workflow in SAP STANDARD.
etc
Mutu

Hi,
There is BBP_WFL_SECURITY setting in SRM 5.0.
http://help.sap.com/saphelp_srm50/helpdata/en/37/830b3b7e7ef74de10000000a114084/frameset.htm
I'm not sure if the table BBPD_COMP_FIELDS is for checking the changes.
We can get answer by testing.
Regards,
Masa

Standard Work Flow

Hi,
Can any1 tell me about the standard work flows (not work flow module) available in SAP. We want Purchase Requisition & PO release should be through email. (not SAP Inbox).
Thanks,
Rashid.

hi rashid,
BC - Workflow Scenarios in Applications (BC-BMT-WFM)
Purpose
With SAP Business Workflow, SAP AG provides an efficient cross-application tool enabling integrated electronic management of business processes. SAP Business Workflow is a solution which has been integrated fully in the R/3 System and which enables customer-specific business process flows to be coordinated and controlled on a cross-application and cross-work center basis. SAP Business Workflow therefore enhances "ready-made" application software. The SAP Business Workflow definition environment can represent business processes simply and can respond to changing external conditions quickly, even in a live system, by adapting the existing business processes.
Workflow Scenarios
Many SAP applications use SAP Business Workflow enabling preconfigured workflow scenarios to be reused in various situations. The scenarios can either be implemented without any changes or configured for your business processes by making minor adjustments. These workflow scenarios reduce implementation time significantly and have been optimally configured for the respective application functions.
Many workflow scenarios are integrated in IDES (International Demonstration and Education System). It is possible to simulate the business processes of a model company in this fully-configured system.
Features
The workflow scenarios can be divided into three categories:
Creating events
Events are created to report status changes for an application object and to allow a reaction to the changes.
Document 4711/98 posted
Material XYZ created
These events can be used as triggering events for your own tasks or workflows. The events are therefore "connected" in a flexible and customer-specific way to application events, without having to modify the standard part of the application.
In some cases, the triggering of these events is not activated in the standard version, but depends on the Customizing settings. You can find further information in the application scenario documentation.
Providing SAP tasks
A task contains a task description and the connection to the application logic via the method for a business object. Before you can use a task productively, you must assign the tasks to its possible agents.
The tasks provided by SAP are generally used as steps in SAP workflows, but you can use them for your own developments as well.
Release change request
Change purchase order
If a workflow scenario only involves one task, the scenario can usually be regarded as a minimal solution for showing the connection between application functionality and SAP Business Workflow. For differentiated control, this SAP task should be replaced by a customer-specific task.
You can find further information in the application scenario documentation.
Providing SAP workflows
A workflow contains a complete workflow definition covering several steps. An SAP workflow has a complete workflow definition, but must still be adapted to the organizational environment of the customer.
Release a purchase requisition
Recruitment
In cases in which SAP workflows describe business processes which also occur in your company, or in cases in which changes should not be made to the SAP workflow for technical reasons, the SAP workflows supplied can be used without any changes or adapted using workflow configuration.
In all other cases, the SAP workflows can be used as templates for your own developments. The existing process structures of the business application components, which are often represented within a transaction, are generally not replaced. SAP Business Workflow is seen as an integration level "above" the standard business functions and uses the existing transactions, function modules, and reports.
see the below links for entire info on workflow.
help.sap.com/printdocu/core/Print46c/en/data/pdf/BCBMTWFMDEMO/BCBMTWFMDEMO.pdf
http://help.sap.com/saphelp_46c/helpdata/en/04/926f8546f311d189470000e829fbbd/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/103b1a61-294f-2a10-6491-9827479d0bf1
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/60559952-ff62-2910-49a5-b4fb8e94f167
http://www.sapmaterial.com/
thanks
sekhar
'reward me points if usefull

Standard Work Flow in PP and QM

Hi Gurus,
What are the standard Work Flow in PP & QM ?
Thanks in advance,
Shree

Hi
Follow the Path to find it your self.
SPRO>Quality Management>Envrionment>Central Functions>Activate Workflow
You get a pop-up screen, Click on "Activate SAP Business Workflow"
you get a screen "Task Customizing Overview"
For each module you have a workflows
click on Assign Agents you will find the number of Tasks for each activities or functions
Like Under Production Orders you will have "inform MRP Controller about trigger pt"
etc like wise you have to use these Tasks provided by SAP to your build or combine as per customers requiremnts with proper agent assignments
Regards
Rehman
Reward Your Points If Useful

Activating Standard Work Flow

Hi All,
How can I Activate the standard workflow?How to trigger the standard work flow when ever a button is clicked on the protal page suppose "SAVE" Button.
Thanks In Advance, Any links and documents are encouraged
Regards
Pavan

Hi Samson
Thanks but
Just make sure that you make the status of
the standard event as 'Inactive'
How the above operation is possible making a event of workflow inactive. For you to give an idea the same BOR consists both the events but i don't want to trigger the workflow for the event which SAP has defined instead i want to trigger the workflow for the same BOR but other event how can i acheive this.
Thanks In Advance
Regards
Pavan

Work Flow for Material Creation in MDM

Hi MM Experts,
Can any one tell me whether there is an option of having Work Flows for Creating Material in SAP MDM (Master Data Management). I think this feature is not available in Standard SAP R/3.
Cheers
Deepal

hi
check this website.
https://www.sdn.sap.com/irj/sdn/nw-mdm?rid=/webcontent/uuid/5024a59a-4276-2910-7580-f52eb789194b [original link is broken]

Triggering a sub work flow for multiple users at same time.

I have a scenario in which I have created sub workflow as an activity for approval process. This sub work flow should be triggered for multiple users at the same time and their decison is independent of each other.
This is like creating multipe instance of the same sub work flow and then the sub work flow runs indepedently as a new work flow for each of the approver and the process is completeded for approver independently.
How can this be achieved?

Tyr to do like this,
1. First include the subworkflow in the main workflow template.
2. Now include standard Block Step in the main workflow template.
3. In the block select the block type as ParForEach.
4. Before doing the 3rd point make sure that all the agents for whom you want whom you want to initiate the workflow, populate them in a Multiline conatiner element.
5. Once completing 3rd and 4th points open the block step under the tab ParallelProcessing assign the multiline container element name in the for e;g if the multi line container element name is COSTCENTER then do the binding like below. the conatiner element COSTCENTERLINE is created by default once you include the multi line conatiner element under parller processing tab.
&COSTCENTER[&_WF_PARFOREACH_INDEX&]& --------> &_COSTCENTER_LINE&
Now assign the agent of the subworkflow as COSTCENTERLINE , imean if suppose you have 3 entries in the internal table then three separate and for three different agents the workflow is instantiated.

Re: Work flow for resource / work center in MEINT

Hello Experts,
We are working on SAP ME 15.0 recently installed. We are trying to send the work center from ECC to ME. In MEINT we see only the following work flow for work center / resource:
As can be seen, LOIWCS02 is not there. When we sent work center (category 9100) with LOIWCS02 IDoc type, it failed in MEINT. But when we sent work center from ECC (category 9100) using IDoc type 9100, it was processed successfully in MEINT but it created work center in ME.
The other component LOIWCS02_ME_RES or LOIWCS02_ME_WC is not getting called. What is the possible reason and resolution?
Would be thankful for any feedback on this.
Thanks in advance
Srinivas

Hello Alexander,
Thanks for the quick reply.
As per the help document, the work center category 9100 is supposed to create a Resource in SAP ME but it ends up creating work center in ME.
If you see the screen shot I had put in my query, I see that there are three work flows - one for LOIWCS03 and the other two for LOIWCS02_RES and LOIWCS02_RES. Would this make any difference since I would expect that the work flow for RES and WC should also be in line with LOIWCS03?
I will be asking my tech team to raise a support incident for this. Meanwhile I would appreciate your reply on this.
Thanks
Srinivas

Work Flow for Service Entry Sheet

Hi all,
We need Work Flow for Service Entry Sheet as below using SAP mail box :
Once Created, will go to Incharge for varification.
If yes, will go to Manager for further varification.
If yes, will go to again Incharge back for Release.
Regards,
Hamadeh Bashir
Gulf Petrochemical Industries Company,
Bahrain

Hi,
Object Type BUS2080 (Service Notification)
Standard Task TS00008336 (Processing a Service Notification)
Workflow Template WS00200099 (Putting a Service Notification in Process)
You can define your own workflow.
Regards,
Srilatha.

Work flow for Rejections in Quality- Usage decision

Dear all
We are in the process of activating work flow for Quality Inspection, During Usage decision there may be rejections for which we need to trigger a mail to the Internal department , stating the Remarks, description, rejected quantity etc ,
If any one has come across the same scenario kindly help us so as to implement the same in our organization.
Regards
Rahul Bhat

Hi,
You can do any of the following according to you Requirement.
1) Below the Rejection Branch using the Send mail you can send the mail to Respective person.
2) Other wise using the Function Module you can send the mail, refer this l[ink|https://wiki.sdn.sap.com/wiki/x/nYKdAw ].
3) Else place this Std. Task TS20000139 and provide the necessary binding below the Rejection branch a popup will open and the user can enter the comments and it will go to the Person whom you want.
Try any of this according to you requirement.
Regards,
Surjith Kumar

IT0022 Education- Is there a Standard work flow for ESS??

Similar Messages

Maybe you are looking for