IT0041 : Same date type with different values in the same infotype

Hi,
Is it possible to store in the 0041 infotype, the same type date but with a diffentent date.
Example :
IT0041
employee 1000:
date type : xx 01.05.10
date type : xx 02.05.10.....
Thanks

Hi there,
My two cents.
I don't think it can be done in standard. Also copying IT 0041 would limit you to enter only 12 dates.
My suggestion:
Create a custom infotype with subtype field and a date field like IT 0015.
On the screen you will only be seeing subtype and date. And assign time constraint 3 to it.
In this way with the same subtype you can record several dates.
cheers
Ajay

Similar Messages

  • Several layered effects of the same kind but with different adjustments for the same layer

    Hi,
    I wonder if it there is an easy way to have several different instances of e.g. glow or bevel and emboss on the same layer.
    I know I can achieve this by using smart objects or a duplicate layer with zero blending.
    I just wondered if there is a way to do this directly in the layer effects.

    Hi emil emil,
    thx for your answer!
    I wasn't even refering to different objects on the same layer, btw. it would be enough if I was able to layer e.g. different bevel and emboss on top of each other (With different colors, softness  and size.)  But I guess the answer remains the same.

  • Mix source data with different granularity into the same fact table?

    I have two transaction tables "Incident (157 columns)" and "Unit (70 Colums)". For every "Incident" that happens there could be one or more records in the "Unit" table.
    As part of my data mart design, I have merged both the tables into a single Fact "Incident Fact (227 Columns)" and inserted the records from both the tables with a join condition between them [incident.IN_NUM = Unit.IN_NUM].
    Is this correct, is my question? or am I mixing source data with different granularity in the same fact table. Appreciate your help.
    Best Regards
    Bees

    Bees,
    Are the measures from 'Incident' , repeated for a given incident where it has more than one record in the Unit table ? If so, then the sum(indicent.measure) will give an incorrect result, no ?
    What requirement is there to physically merge the tables together outside of OBIEE? With OBIEE you could have one logical 'fact' table to present to report users, which sourced from seperate Incidents and Units tables and would stop the incorrect aggregations occuring. A common modelling piece in the same way would be Order Headers and Order Lines, quite common in OBIEE to have a logical 'Orders' fact which contained both Order header measures and Order line measures, this translates to your Incidents -> Units relationship.
    To do what I've mentioned, is relatively straight forward, you need a 'Dim - Incident' with two levels, Incident and Unit, mapp the unique identifiers in as the level keys and then use these levels to set the content levels correctly in your 2 logical tables sources for logical 'Fact' , ie Incidents LTS at incident level, Units LTS as units level.
    Hope this helps, let us know if you get stuck.
    Cheers
    Alastair

  • Unable to copy database with different name in the same instance

    I had a huge database and wanted to try some change optimization changes.
    So wanted to make a copy of the database along with data in the same instance.
    I have tried copy database wizard several times but always see the error as in attachment.
    Can someone let me know how to troubleshoot further?
    If this is not the correct way please suggest how do i copy a database with different name in the same instance along with data.

    Hi Nandu,
    From the screenshot, the error 1813 happens when corrupt database log is attempted to attach to the SQL Server. To work around this issue, please preform the following steps, for more details, please review this
    blog.
    1. Create a new database with same name which you want to recover. Make sure that the MDF file and LDF file have same name with previous database data and log file.
    2. Stop SQL Server. Move original MDF file from old location to new location by replacing just created MDF file. Delete the LDF file of new location just created.
    3. Start SQL Server. At this point, the database is in suspect status.
    4. Make sure that system tables of Master database allows to update the values. Please note that you will be performing this in query window.
    Use Master
    go
    sp_configure 'allow updates',1
    reconfigure with override
    go
    5. Change database mode to emergency mode.
    SELECT *
    FROM sysdatabases
    WHERE name = 'DatabaseName'
    BEGIN
    UPDATE sysdatabases
    SET status = 32768
    WHERE name = ' DatabaseName '
    COMMIT TRAN
    6. Restart SQL Server. Then execute the following DBCC command in query window to create new log file.
    DBCC TRACEON (3604)
    DBCC REBUILD_LOG(databasename,'c:\yourdatabasename_log.ldf')
    GO
    7. Reset the database status using following command.
    sp_RESETSTATUS yourdatabasename
    GO
    8. Turn off the update to system tables of Master database running following script.
    USE MASTER
    GO
    sp_CONFIGURE 'allow updates',0
    RECONFIGURE WITH OVERRIDE
    GO
    9. Reset the database status to previous status.
    BEGIN
    UPDATE sysdatabases
    SET status = (value retrieved in first query of step 5)
    WHERE name = 'DatabaseName‘
    COMMIT TRAN
    GO
    Make sure that you have done all the steps in order and restarted SQL Server where it is mentioned. Also run SQL Server Management Studio as administrator.(Right click-> Run as Administrator)
    Thanks,
    Lydia Zhang

  • Passing different values to the same servlet

    Hi,
    Is there a way to pass different values to the same servlet?
    Background:
    I have a database that I query to acquire a list of customers, then I show each customer as a link, that when clicked will show details of that customer. (The customer table is dynamic so I can't create a new page for each customer)
    When using JSP what I do is
    //Do query database
    while (rst.next())
         String cust = rst.getString ("cust");
            out.write("<a href = \"cust2.jsp?cust=" + cust + " \" >" + cust + "</a> ");
    }Then on the cust2.jsp. I will use
    String str = request.getParameter ("cust");to acquire the customer to get details of.
    Is there a way to do the same using servlets?
    I could swap to JSP when creating this particular part of the project but it won't look good and it would help me learn a few things when there is another way.

    I want to know if there is a way to pass a variable from a webpage link like in my JSP example using servlets.
    Here is what I wanted to do:
    I have a webpage that contains customer names and each name has a link to the same servlet (let's say the link is famia/servb). I want servb to show detailed information about the customer my visitor clicked in the webpage.
    The logic I was thinking is to pass a variable to this servlet, then I can use that variable to know which customer should I query in my database. So that I can show the details to my users.
    Here lies my problem, I don't know how I can pass this variable, or even know which customer my visitor clicked. I can't use a new servlet for each client since the customer is in a database and if my customer base grows then I would need to create a lot more web page that does the same thing.
    The JSP example I gave is how I will be coding it if I am using JSP, but now I am using servlets. So I was wodnering if there is a way to do this using servlet. Or should I stay with using JSP for this particular logic and just call servb after the JSP page acquired the variable.
    I'm trying not to use "<original URL> + ? + <variable> = <value>" (eg: http://www.famia.net/customer?cust=famia) as the means for passing the variable. (or in the example as a means of passing variable cust with value famia)

  • Invoice posting with different currency for the same PO

    Hi,
    Can we post the the Invoice with different currencies for the same PO.
    For example.
    PO has Qty 100 pcs.  amount 100 USD
    GR   Qty 100 pcs.
    Is it possible to post Invoice of 50 pc with 50 USD, and 50pcs with some other currency.
    Any sugggestions pls.
    Thanks,
    Satya

    Hello
    As per my knowledge, that is not possible.
    And in whjat scenario, we need to do that?
    In MIRO header itself we have the vendor currency, so it is not posbile to maintain different currency in different line items in MIRO.
    If you want, you can do MIRO in different currency that what is in PO.
    In the example given, you have o post 2 invoices, one for 50 qty in USD and the other 50 in different currency in other invoice transaction by giving the currency in basic data-invoice header and then only press ENTER after giving the PO number.
    Hope this helps
    Regards

  • Can two peeps use iChat with different accounts on the same computer?

    What do I do to REMOVE an old AIM account and replace it with a new account in IChat?
    Can two peeps use iChat with different accounts in the same computer?
    (Actually, two people share a laptop, but one of us cannot use her AIM account cuz mine is in iChat already... And, when traveling, I have the computer - and I would like to use iChat on the computer...)

    In iChat 4 you can have more than one AIM Valid name logged in at once.
    AIM valid = AIM, @mac.com or a MobileMe name.
    What you are then stuck with is that iChat is linked to one Buddy Picture and The one Mac User Account's Address Book which may or may not have Full Names, emails details, or a Nickname in iChat 4 linked to the Screen Names.
    Whilst it does let you both log in whilst using one Mac User Account there are drawbacks about who uses the keyboard and reading meesages from the other persons Buddies.
    8:50 PM Sunday; November 30, 2008

  • How can i share documents with different users on the same mac?

    How can i share documents with different users on the same mac?

    Shared how? The other users can read the documents or you all can read and write the documents?
    The first is easy just place the documents in /Users/Shared anyone can access the files there and the other users will be able to read them.
    The second is a bit trickier.

  • How can I share the home folder with different accounts on the same mac?

    Hi, here's a question:
    How can I share the home folder with different accounts on the same mac?
    The whole point being not to have to install all my apps, and move all my files each time between users.
    The second thing would be to be able to modify one document on one account, and have it changed on the other account without having to copy it.
    I would like to have a pro and a private account on my mac.
    Thanks for you answers,
    Doug

    Your apps should not be installed in your home folder--they should be in /Applications where every user can access them.
    If you want to share things between users on the same Mac, use the /Users/Shared folder. Keep your home folder private. Trying to defeat the protections on the home folder subfolders just gets messy. I've never bothered to figure out all of the problems associated with it so I can't explain how to do it.
    Even with using Shared, you would need to alter the ACLs on the shared folder in order to allow both users to modify the documents.
    You must create a Group in Users & Groups and put each user in that group. Then create a folder inside /Users/Shared where you want to share the various files.
    Then, add an ACL to the shared folder that gives the group special permissions. on that folder.
    sudo chmod -R +a "<sharinggroup> allow delete,chown,list,search,add_file,add_subdirectory,delete_child,file_inherit,directory_inherit" /Users/Shared/<sharing folder>
    Replace <sharinggroup> and <sharingfolder> with the name of your group and your folder. Then, run the command in the Terminal.
    With that ACL, each user in <sharinggroup> will be able to alter the files created by any user in the group in that <sharingfolder>.
    Essentially, the client OS is not designed for true file sharing among the individual users. It is designed to isolate each user account from the others.

  • Can I sync two ipods with different ID on the same computer?

    can I sync two ipods with different ID on the same computer?

    Hi,
    Yes you can as long as you have two seperate user accounts on your computer. Hope this helps.
    xxmitchxx90

  • Lost my playlists when I tried to share libraries with different accounts on the same MacBook computer

    lost my playlists when I tried to share libraries with different accounts on the same MacBook computer

    Hi dprette,
    When setting up iTunes to share a single music library between multiple user accounts on one computer you should follow the steps in this article -
    iTunes: How to share music between different user accounts on a single computer
    http://support.apple.com/kb/HT1203
    Thanks for using Apple Support Communities.
    Best,
    Brett L

  • Ability to process several raw files with the same content but with different exposure into the single picture

    Can you add to the Lightroom an ability to process several raw files with the same content but with different exposure into the single picture?
    Base raw files can be given with exposure bracketing during shooting, for example.
    The goal - to get maximum details in darks and lights (if we use the "ligths recovery" or "fill lights" we lose the quality because raw file just have no all required information).
    The similar (but not the same, only the idea) thing - is High Dynamic Range Photography in Adobe Photoshop
    Thank you

    The plugin LR/Enfuse does this already. And of course Photomatix have a plugin available for Lightroom. This essentially amounts to pixel editing, which is beyond the range of Lightroom's metadata editing.

  • How can I share applications and softwares with different users of the same computer?

    First question: How can I share applications and softwares with different users of the same computer?
    Second : Can I use 2 different I cloud accounts to synt 2 iphones with one computer?

    Applications installed on the admin account are available to all user accounts unless Parental Controls are enabled.
    Yes.   Separate user accounts, help here >   How to use multiple iPods, iPads, or iPhones with one computer

  • If I already have a particular app under one apple Id and I purchase the same app under a different Id for the same device, will it overwrite or replace the previous or will I have two of the same app on the same device??

    If I already have a particular app under one apple Id and I purchase the same app under a different Id for the same device, will it overwrite or replace the previous or will I have two of the same app on the same device?? 
    I'm asking because I purchased an app with an id that has been cancelled so I cannot update that particular app. I can purchase the app with my new id but I don't want to do so if its going to erase all the data I have with the previous purchase...

    Figured it out. Thanks.

  • [ora_hash] different value for the same input

    hi all,
    i'm using 2 different machine running the same version of oracle (11g).
    on those 2 db i have the same tables with the same datas.
    for the comparisson of the data i'm using the ora_hash function (both on numeric and string fields) and for some records i get different results.
    how is that possible?
    (by the way looking at the records that has different hashes the values calculated by the hash function are the same)
    thx

    You have posted in the wrong forum. As the forum title says this forum is for SQL Developer and not for SQL or PL/SQL questions.
    After reading the information provided at the end of this reply you should
    1. create a new thread in the SQL and PL/SQL forum
    PL/SQL
    2. Edit this current question to add a link to the new question and tell people to follow up in the other forum.
    3. Mark this current question ANSWERED so followup will be in the other forum.
    Thanks.
    When you post in the other forum provide information related to the following
    >
    for the comparisson of the data i'm using the ora_hash function (both on numeric and string fields) and for some records i get different results.
    >
    Please post your 4 digit Oracle versions - both versions (result of SELECT * FROM V$VERSION) and examples (i.e. actual code) of values that are giving different results.
    >
    (by the way looking at the records that has different hashes the values calculated by the hash function are the same)
    >
    What? there can't be 'different hashes' if the 'values calculated by the hash function' are the same. What are you saying here?
    Again - provide examples that show the differences. Should be something like
    SELECT ORA_HASH(12345) FROM DUAL;Since you say there are differences on the two machines provide the execution plan from each machine that shows what Oracle is actually doing. One machine may be applying a function to the data.

Maybe you are looking for