IT2001 (Absences) No quota available

Hi SAP Guru's,
    Well when ever i pick the quota(paid leave) for any hourly employee it gives me the error
"No quota availabe for att/abs 0100 for per no. XXXXXX between -
(Date) and -
(Date)"
    Can someone please make it easy for me by showing how i should configure it at Time Side to generate this quota or there is other way.
Regards
Roger
Edited by: Roger123 on Jul 26, 2010 10:04 PM

Hi
Try this functional solution
Create the appropirate Quota for absence for that employee ( Absence quota info type(2006)) and then
try to create the entries
with regards
partha
keep sharing and learning

Similar Messages

  • Report needed: Absences x Quotas

    Dear all,
         I need a report to show from wich quota was an absence used.
        Example:
    ABSENCE  HOURS   QUOTA   DATE..
    XX       nn      YY
    XX       mm      YY
        I know how to see it by using tables (PTQUODED) but I need a report for users, and before coding a new one I would like to see if there is one standar available.
    Any help will be appreciated and rewarded,
    Thanks a lot in advance!
    Fede

    Yes dude, but those reports dont show me for a given absence from which quota it was deducted.
    I have some absences that can deduct from more than 1 quota (depending on the amount of the quotas)... so I need a report that shows me in which quota absences took the hours.

  • Have historical quotes available during quatation process

    Hi SD Gurus
    Anybody pls help me ,
    "Have historical quotes available during quatation process  ".-- Fixing Core Phase.
    Pls send me Business process for this Pain Area.
    Very Urgent.
    Thanking you
    with regards
    pawan

    Hi,
    Check in VOV8 (Sales order type control) for your quotation type,if you have used the field Quotation messages(On/Off swithces for quotation processing.)
    Here you can choose the option as per your requirement.
    On/off switch for messages about quotations
    Procedure
    Set an indicator here if you want to receive a message informing you that open quotations exist when you create a sales document. Depending on the indicator you select, the system searches for open quotations in the sales document either at the header level for the customer or at item level for the material.
    Use
    The following indicators must be set:
    No indicator: do not check
    A: check at header level
    B: check at item level
    C: check at header level and copy if unique
    D: check at item level and copy if unique
    E: check at header level and branch directly to selection list
    F: check at item level and branch directly to selection list
    Indicators C and D
    If there is exactly one reference document at item or header level, this is copied directly into the sales document you are about to create. The dialog box in the sales document that refers to an existing reference document is not displayed. The system issues a message in the status bar informing you that there is exactly one reference document for the sales document.
    Indicators E and F
    If there are several reference documents at item or header level, the system does not call up a dialog box but instead branches directly into a selection list containing the reference documents, where you can choose the required document. If there is only one reference document, it is copied directly as above.
    Reward points if useful
    Regards,
    Amrish Purohit

  • CPU & I/O quotas available in Oracle 10g ?

    Im a developer.
    I wanted to create 2 schemas so that they will not interfere with each other.
    I wanted to also make sure that the load/activities on one of the schema does not affect the performance of the other.
    Is there anything equivalent of "quotas" in oracle so that the schema ( and teh associated users ) will not consume more than 40% of the CPU and I/O if the quota is set at 40%
    Thanks

    Setting CPU_PER_CALL, CPU_PER_SESSION, LOGICAL_IO_PER_CALL, and LOGICAL_IO_PER_SESSION in a profile, though, will not prevent one user from executing a large enough quantity of SQL in a short enough period of time (either in a single session or in multiple sessions) to use up nearly all of the available hardware resources.
    Assuming you have the enterprise edition, you would probably want to use [Resource Manager|http://download.oracle.com/docs/cd/B19306_01/server.102/b14220/mgmt_db.htm#sthref2259]. That would allow you to prioritize the various users in the database and grant one user (or group of users) just 40% of the total CPU if CPU was near 100% (if there are still spare CPU cycles, Oracle would allow those users to use more than 40%)
    Justin

  • Attendance/Absence Text not available in CATS_APPR_LITE layout

    In the display layout of CATS_APPR_LITE the attendance/absence type description is not available for display.  Is there a way to display the attendance/absence type description in the layout?

    SAP suggested the following
    you can fairly easily include the desired textual descriptions in the
    report list by using the BADI CATS_REPORTING. In order to include the
    fields the following needs to be done:
    a) a new field zzawart_text needs to be appended to the structures
    CATSXT_COMP_DETAIL and CATSDB_ALV
    b) In the BADI Method BEFORE_DISPLAY_APPR
    the function module CATS_HR_ABSENCE_ATTEND_TEXT needs to be
    called for every record that has the AWART field filled
    the result of the function call is moved into the new field
    zzawart_text.

  • ZFS per-user quota availability

    Hi,
    I am just wondering if the new Solaris 10 update will include per-user quota for one ZFS file system?
    To be able to auto mount cross different file systems as exported by ZFS, one must use autofs4, which is an requirement very difficult to meet. We run different Linux distros/Unix and versions of various Linux and Unix. It's not possible to upgrade autofs to the latest autofs4 on all of them. Also we need to keep different versions around.
    Simon

    Let's use an example. Create one file system for each user, user1, user2 and user3.
    /export/home/user1
    /export/home/user2
    /export/home/user3
    On one Linux client, user1 logs in and autofs auto mounts /home/user1. When user1 tries to change directory to /home/user2. Autofs would not mount /home/user2 because the autofs older than autofs4 can't cross a different file system to mount.
    Simon

  • Error when creating absence quota IT2006

    Hi all,
    When entering leave request through ESS for this pernr, I am getting an error message which reads “No quota available for this pernr”.
    But when I was creating absence quota IT2006 I got an error message 'No validity interval for key 1 50 10'.
    If I bypass the message, even though I type some constant in the ‘number’ field for any absence type, when saving(or when clicking the green colored tick mark) its getting defaulted to zero.
    Is there any IMG configuration missing? Please provide some idea on this.
    Thanks a lot in advance.

    Hi Johnson,
    The guess the reason for the quotas being automatically assigned zero is that, these quotas would be defined in such a way that, they can only be generated and not input. Please refer to the table V_556A_B, and see what is being entered against the quota there. Enter it as No Generation for you to be able to enter quotas in the IT2006. If you have enabled the "No Generation" then you wouldn't be able to enter data in IT2006.
    The reason for the error is that, you wouldn't have specified the date interval in which the Absence Type can be deducted. Please check that too.
    Thanks,
    Krish

  • Error while creating absence record in PA30 using 2001 infotype

    Hi all,
    iam getting an error while creating absence record for infotype 2001for LOP(unpaid)
    error : No quota available for att./abs. 6000 for pers. no. 61000052 between 31.12.2009 and 31.12.2009
    i have did
    Create a absence type LOP
    Determine Entry Screens and Time Constraint Classes
    Define Counting Rules
    Assign Counting Rules to Absence Types
    Payroll: India>>Absences>Describe Absence Valuation Rules 01 Unpaid Leave
    Group Absences for Absence Valuation>>Absence valuation rule>>F4 country grouping 40>> assign 01Unpaid Leave
    please solve this

    Actually I don't know how your system is configured.
    However, the error you're receiving seems you have assigned the absence type to a quota type.
    Please go to your counting rule and check whether Deduction rule - absence quotas - within entitlement field is filled.
    If yes, get the deduction rule value and go to
    SPRO Time man- Time data rec - Absences - Absence Cat - Abs counting - rules for counting (new) - deduction rules for abs quotas and check the quota type in here.
    If there is a quota assignment in place, before creating an IT2001 you need to create a IT2006 for that specific time period.
    Or, you need to delete the quota assignment via two config steps mentioned above.
    Regards,
    Dilek

  • Err "Only absence less than 1 day are allowed for this absence type

    Hi Experts,
    When I am creating IT2001 record for EL an error is coming, "Only absence less than 1 day are allowed for this absence type". Although Counting rule is defined properly and in check for Condition of absence <1 day & full day both are checked.
    Regards,
    Tomesh

    Hi Nalla,
    The remaining amount for Casual leave is not updated even after we apply the casual leave .
    Suppose there are 20 CL quotas available. If we apply for 2 CLs then remaining should be 18.
    Regards,
    Tomesh

  • Issue with PTO (Paid Time Off) quota generation

    Hi All,
    We have an issue with quota generation of PTO for our employees.
    The issue goes like this:
    We have a Paid time off for employees 5weeks( 200 hrs) for employees who have worked less than 5 years.
    we have  paid time off for employees 6 weeks ( 240 hrs) for employees who have worked more than 5 years.
    we have the following logic that has to go in this config:
    -- Our fiscal year starts on Feb 1st and ends on Jan end or Feb starts which has a full week of working days. ( ex: if 01/31/2012 falls on a Thursday the following Monday which has full 5 day working week would be the end of the fiscal year).
    -- Depending on the working hours of  the employees and the date of joining for the first year ( for new hires)0041 info type the eligibility gets varied and reduced. Ex( employees who joins on start of fiscal year and works 40hrs per week schedules is eligible for 200hrs of PTO. Employees who join in the month of august and works for 35 hrs per week ( i.e mid of fiscal year) would get 91 hrs of PTO.
    I need to put this in the system. I am thinking this could be done with out tweaking PCR.I need help in configuring this in Absence quotas as to what are the things i need change in system config and how do i do it. Please help with some screen shots if possible.  I really need this to get it done ASAP. Looking forward for help.
    Thanks,
    Chowdary.

    We use TM00 schema. Can i call TS15 and TS 12  rules into TM00 acheieve my issue of quota entilements?
    Iam doing this because my businees needs to see if an employee chages his work schedule from 40 to 30 or 20 etc.. the PTO has to vary accordingly.
    As the minimum eligibility is to work for 20 hrs to avail the PTO days. If at any point the employee drops it under 20 he will not be eligible till he work any this >= 20hrs per month so the evaluation has to check periodically to update the quota availability.... I need help plz suggest ...

  • Quota overview is not being displayed in ESS Working Time

    Hi All,
        Please provide a solution for this below mentioned query.
    Quota overview(Absence Entitlements) can be seen in the R/3 for an employee but same(Quota Overview), list of all the leave entitlements cannot be seen in the ESS. There is a message being displayed "There are no customizing settings for ongoing requests for employee No:****". What customizing settings is he talking about?
    Anticipating a solution for this. Thank you.

    Hi.
    R u sure the Absence that is available in infotype 2006 is valid.Do try to create a fresh quota if you have changed the grouping in between,.
    Regards,
    Nachy

  • Consolidated Absence report.

    Hi Friends,
    How to get  cosolidated absence quota report.
    Ex. Casual leaves 20 days per year.
    i want to take Quota, Availed days and balance days for all employees in a specific period.
    emp      quota     used       Balance
    emp1     20             4           16
    emp2     20             6           14
    emp3     20             12          8
    How to get this report. Please guide me
    Thanks.
    Sam.

    Hi ,
    Better to use PT_QTA10, you can use all the features for consolidation , and use layout for display as you wish like .
    Regards,
    SureshP.

  • Resrtict Absence Type for certain grouping

    Hi,
    There are 2 kinds of quotas "Hourly and Daily" for our cleint. Accordingly we have also created 2 absence types 2000 and 2005 for Daily and 2005 hourly respectively.
    But there are some hourly employees who can still book 2000 absence. How can I restrict this 2000 absence type for hourly employees so that the system can throw an error "No quota available for att./abs. 2000 for pers. no. &2 between dd.mm.yyyy and dd.mm.yyyy"
    Regards
    Naveen

    Dear,
             please create two ESG for absense quota in table V_T554S and don's assign Quata type 2000 to user ESG hourly & if you have all ready this two grouping please delete entry from V_T554S & V_559L for ESG of hourly.
    Thanks
    Nh

  • Quota Used filed

    Gurus
      I have Created a Absence with Quota as Paid leave in Valuation basis table T554c.
    Now client want that as unpaid leave. So i have deleted Quota, generation rule.
    In deduction rule also Quota removed
    In assign counting rule to absence also the tick of Quota deduction is removed
    When i create Absecen the field is appraing as Quota used 1 (For One day absence) but there is no Quota for the employee
    When i run payroll the deduction is happening perfectly as Loss of Pay.
    My issue is how to remove the quota used field.Kindly advise me in this.

    Hi
    When i see in Overview(Shift+F8) absence is coming as payroll Hours 8.5
    When i see through F7 following details are coming as below
    Absence type             0008    ESI Leave-CKPL
    Time                             -
    Absence hours                8.50
    Absence days                 1.00
    Calendar days                1.00
    Quota used                   1.00  Days 
    Advance Payment
    Off-cycle reason
    Payment date
    Payroll Identifier
    Payroll type
    Kindly let me know if any issues.

  • Absence days caliculation based on working days  HR ABAP

    Hi experts,
    I am developing one report that is for Variable Bonus report. We are evaluating the data based on the Variable Bonus period  based on Selection-screen. for ex: 01.04.2007 to 31.03.2008
    There is one record in the IT2001 with begin date 26.01.2008 end date 25.07.2008 for the absence type 0620(Unpaid leave). But our Variable Bonus  period is 01.04.2007 to 31.03.2008. I want to calculate absence days for the above record from 26.01.2008 to 01.04.2008 and 26.01.2008 to 31.03.2008 
    Please let me know any function module which gives me exact absence days.
    i have tried RKE_SELECT_FACTDAYS_FOR_PERIOD... but its giving based on factory id but in my requirement the working days differ from each employee ...for ex:  5 working days in a week or 5.5 working days in a week, 6 working days in a week ....for each employee....
    Please suggest me what could be done to achieve this.....
    <REMOVED BY MODERATOR>
    Thanks in advance....
    Sreenivasa Sarma K.
    Edited by: Alvaro Tejada Galindo on Apr 9, 2008 6:02 PM

    Hi sudheer,
         Thanks for your reply. 
          Yes i need to caliculate the absence days based on S_vbpd(vb period from selection screen). but here in IT2001 Absence day are maintained as contract period ... for example..
    vb period   01.04.2007 to 31.03.2008
    start date                  end date
    25.03.2007     03.04.2007
    20.03.2008     05.04.2008
                  01042007                                          31.03.2008
    ___________|___________________________________|_____
    25032007        03042007     20.03.2008                   05.04.2008
    But system caliculating absence days for period 25.03.2007 to 03.04.2007 and 20.03.2008 to 05.04.2008 in infotype IT2001 total but i need absences from VB period start date and contract enddate(01.04.2007 to 03042007) next period (20.03.2008 to 31.03.2008).
    Please help me for the above scenario.....i hope i made it clear my requirement...
    Regards,
    Sreenivasa sarma k.

Maybe you are looking for