IT2006 Time Constraint with Multiple Subtypes

My client is utilizing 2 different subtypes in IT2006 for a particular personnel area.  The 2 subtypes are vacation (98) and floating holiday (50).  Since each employee will have 2 IT2006 for the year - one for subtype 50 and one for subtype 98, their configuration was set up to issue a warning message when the second record is entered with the same date parameters.  The problem arises when more than one IT2006 with the same subtype is entered for the same time period - SAP allows you to do this. 
Is there any way to set up the time constraint on the subtype so that not more than one can be entered for the same time period?  They can change the program to check for the existence of a record for the year, but if there's a way to control this via configuration, please let me know!
Thank you!

That is actually set up correctly.  There are 2 types of qabsence quotas, one for vacation and one for holiday.  The reaction cannot be an "E" because then an employee could only have one or the other quota, not both.  Every employee needs to have both.  So the reaction has to stay at a "W" (could also be a "N").  And the subtype constraint needs to stay at a "Z" and not a "T" because checks need to be made with other time infotypes so someone doesnt' try to input 8 hours vacation along with actual working hours.
It's sounding to me like there are no other configuration areas that will remedy this issue and they'll have to check for the existence of a record in the program.
Thanks.

Similar Messages

  • Time Constraint assignement to Subtypes of an infotype.

    Hello All,
    Where do we maintain Time constraint assignment to subtypes of an infotype. I am looking to subtypes of IT 0210 ( Tax With holding ) " where do we create the subtypes and their characteristics for this infotype in IMG? I tried in view V_T591A but there is no entry for this 0210 infotype but I can find the time constraint assignment for the rest of the infotypes in this view.
    Thanks,
    Chakri.

    try the following
    SPRO>Personnel Management> Payroll>Payroll:USA>Payroll Results Adjustment-->Define Time Constraints for adjustments
    select infotype 0210 & maintain
    ~Suresh

  • Time Capsule with multiple users. Data Safe?

    Hi.
    I was just wondering if the I use Time Capsule with multiple users (multiple macs) I believe the backups are all seperated and password protected. Am I right?
    But what about the migration assistant? Doesn't the migration assistant help you to transfer your data from one mac to your new one without asking for a password? So wouldn't it be easy to use the migration assistant to get data of another time capsul backup?
    At the work place of my girlfriend they are using time capsul, and I'm not sure if I would advise her to backup her data to that timecapsule. Ok you can exclude folders, but not the mailaccount.

    Youknowthebo wrote:
    Thanks for the reply.
    But isn't it possible to transfer data from an old user account to a new account with a different name? Wouldn't that overide the password prompt?
    No more or less than on your Mac.
    I mean I understand that if you migrate a user account from one mac to another you wouldn't gain access to the home folder of that user, but as I understood the migration assistant it is possible to migrate data to a folder of your choice. I did not try it yet but that's what I (maybe misunderstood) read here http://web.me.com/pondini/Time_Machine/19.html
    No. You can select which user accounts to transfer, but you can't transfer one user's data to another.

  • Time Machine with multiple users on single computer

    Hi All,
    I have an iMac at home with multiple user log ons. I'm about to get the Time Capsule and start using Time Machine (currently I use backup).
    When I switch on Time Machine, does it switch on for all users, or will each user need to turn on Time Machine?
    If I have to switch on Time Machine for each user, will each user's time machine back up the entire computer (so I'll have two complete copies on my computer on the external drive)?
    If this does occur, can I control what Time Machine backs up so TM only backs up user specific information?
    Thanks in advance,
    Chris

    When you first backup it will backup your whole system (user directories, system directories, applications, etc) unless you specify folders to exclude. When a user account is added to the computer, their home folder will be added to the backup in a similar way to if you added a new application. It will back up the directory structure exactly as it is on your main hard drive. The backup will essentially keep a copy of the whole hard drive on the backup drive.
    The Time Machine will either be on for the whole system, or off for the whole system. It is not on or off for a specific user account. Users (depending on if they've got admin privileges) may have control over turning time machine on or off, but this does not change who can access the backups. All users will be able to invoke Time Machine to get to their backed up files.
    Time Machine does not make separate backups for individual users. Instead, it preserves the permissions for backed up files, so while every user can access the backups, they cant just browse other users' files on the backup. The same restrictions on the main drive are carried over to the backup. Still, a standard user who's lost a file will be able to go into Time Machine, access a backed up version of the file, and restore it. Unlike standard users who are restricted from seeing other users' files in the backups, Admins are also restricted but they can be authenticated to view other users' files if they want to.

  • Time Evaluation with multiple time events

    Dear Friends,
    I have an issue in our current project. Kindly try to help me with a solution.
    We are working on Time Management module with Positive Time Recording method and evaluation- India. (Payroll module is not implemented)
    My issue is:
    Evaluation with multiple time events in a day: In our project, we have a scenario like the employees record multiple clock in and clock out times for one day and are uploaded into infotype 2011. But during time evaluation, only first Time event that is P10 (Clock In) and the last Time event P20 (Clock-out) in a day should be considered for evaluation, ignoring any multiple time entries in between duration in the table TEVEN (Infotype 2011).
    Pls let me know how this requirement can be met. Do we need to define any new PCR’s or create any functions? If yes, pls tell me the process in detail as I am new and implementing Time management (Positive Time recording with Evaluation) for first time. Try to help me as soon as possible.
    Thanks & Regards,
    Chiranjeevi
    Edited by: chiran reddy on Feb 15, 2008 2:20 PM

    is it not possible to enter only the first p10 and last p20 from the time systems into 2011.

  • ASO Time balancing with multiple hierarchies

    Hello,
    I have an Essbase 9.3 ASO cube with multiple hierarchies in the period dimension (set as type = Time), and I'm trying to set one of my Measures to Time Balance Last with SkipMissing.
    When I validate the outline, I get:
    "This prototype must have all its shared members as siblings of previous sibling."
    on all the leaf level members in my period dimension.
    any ideas?

    We are on Essbase 9.3.0.1 and also tried to use ASO Time balance functions in conjunction with multiple hierarchies enabled.
    I recommend you not to use the ASO time balance functions. We did and had to revert everything after complaints from our user base.
    If you still use it, please test cases where you retrieve TB Last as well as flow values together with ytd and periodic values.

  • Time Capsule with Multiple Drive Dock (Current Gen w/ 802.11AC)

    I've seen mutliple threads regarding USB hubs, but nothing regarding Hard drive docks.
    I have the NexStar HX4 Quad drive bay w/ only 2 drives installed. I partitioned each drive into 500GB partitions (so 2x500GB on one, 4x500GB on the second one) and I'm having issues now with the second drive installed getting the shares to stay reliable. Problem is I don't have a Mac at my house just yet, but I'm working towards that.
    What's happening is either one of the drives will drop out or oddly enough it's flipped from one port to another that was empty. I suspect these could be a result of the dock going screwy but I'm not sure. This wasn't a problem until I added my 2TB drive yesterday. I've had to power cycle the TC 4 times and the drive dock 3 times. At one point, the TC was showing the shares to my phone but it was denying access initially, so I did a reboot on my phone and no go. Rebooted the TC and dock and it came back just fine.
    Has anyone else used this dock and TC combo or have they tried a multi dock solution? I'm just wanting to get this to straighten out as I do store a lot of data and the reason I chose the TC was because I liked the idea of having some storage inside the thing and I was planning on getting a Mac back then like I am now so it seemed logical.

    does the beam forming occur with multiple clients
    Yes, but Apple is unclear about how many cients can be connected simultaneously with this feature.
    do these clients have to be 802.11ac compatible?
    Yes

  • Creating infotypes with multiple subtype

    Please tell me
    How to create infotype with multiple subtype

    Hi
    Please check this like it has got step by step details
    http://www.sapdevelopment.co.uk/hr/hr_infotypes2.htm
    Regards,
    Venkat

  • Time Buckets with multiple Key Figures in Each

    Hello Experts,
    I have seen documents creation of ageing buckets and calculations but not seen any document with ageing bucket having multiple Key Figures part of it.
    User's have used Excel to create Bucket header and using V and H lookups they are populating data in to those columns. Is there a way we can achieve this in Bex Designer? Below is what needed on report which would give user's overview of Current Week, Previous Week, Last 4 weeks and Last 13 weeks. I have attached Snapshot for better Understanding
    From Excel--->
    Target
    Current Week
    Last 4 Weeks
    Utilization
    Billable
    Non-billable
    Non Work
    Utilization
    Billable
    Non-billable
    Non Work
    Utilization
    Billable
    Non-billable
    Non Work
    Thanks
    Sam

    Hi Sam
    If week is your time period analysis then create a structure in columns, above your key figures, based on week selections variable.
    pic example
    I don't think that you will find such a document.
    Thank you
    Yiannis

  • Time Machine with multiple HDs

    Hi,
    tried searching but couldn't find an answer so here goes:
    Can you use multiple HDs with Time Machine? As in: I have 3 external 500gb HDs. Can I get three more to back up each one?

    TM will only back up to one drive at a time. Other applications, such as SuperDuper, will back up to multiple drives. You could use Backup in Applications to back up selective files to another drive.
    Joe

  • How to use airport time capsule with multiple computers?

    I'm sure there are some thread about this but i couldn't find it... so sorry for that but hear me out! =)
    I bought the AirPort Time Capsule to back up my MBP
    And so i did.
    then i thought "let give this one a fresh start" so i erased all of it with the disk utility and re-installed the MBP from the recovery disk.
    I dont want all of the stuff i backed up just a few files and some pictures so i brought that back.. so far so good.
    Now i want to do a new back up of my MBP so i open time machine settings, pick the drive on the time capsule and then "Choose" i wait for the beck up to begin, and then it fails.  It says (sorry for my bad english, im swedish haha) "the mount /Volume/Data-1/StiflersMBP.sparsebundle is already in use for back up.
    this is what i want:
    i want the "StiflersMBP.sparsebundle" to just be so i can get some stuf when i need them. it's never to be erased.
    i want to make a new back up of my MBP as if it's a second computer...
    so guys and girls, what is the easiest and best solution?
    Best regards!

    TM does not work like that.
    If you want files to use later.. do not use TM.
    Or do not use TM to the same location. Plug a USB drive into the computer and use that as the target for the permanent backup.
    Read some details of how TM works so you understand what it will do.
    http://pondini.org/TM/Works.html
    Use a clone or different software for a permanent backup.
    http://pondini.org/TM/Clones.html
    How to use TC
    http://pondini.org/TM/Time_Capsule.html
    This is helpful.. particularly Q3.
    Why you don't want to use TM.
    Q20 here. http://pondini.org/TM/FAQ.html

  • Time Capsule with multiple computers

    Everyone in our office uses macs, and we use time capsules for backing up. It seems that only one person can back up at any given time, so when one user is trying to do a backup, all of the other users have failed backup attempts because the disk is not ready.
    I suppose I either need to make sure that people are backing up at different times, or is there another way around this?
    Can I tell time machine a specific time I want it to back up or is it always going to be automated?

    RangerJoe55 wrote:
    Yeah, I posted here kinda hoping to figure out how to do more scheduled type backups instead of the seemingly random ones now.
    Time machine will do backups hourly, if your Mac is awake and the destination is available. There are a few exceptions, depending on when the last backup was done, such as after waking from sleep, powering-up, or after a manual backup.
    It does seem weird that it won't back up multiple computers at the same time....
    It usually does. I don't recall seeing a post where it doesn't.

  • Time Machine with multiple hard drives

    I use a very large external hard drive for time machine. I back up to this time machine, the two hard drivs that are inside my macbook pro, 512GB ssd, and 250GB SSD that is in the optical drive. I then backup a 1TB portable hard drive which holds all my movies and then I backup another 1Tb portable hard drive which holds all my "reserve" files, which means they are files that are no longer important to be on my computer. Old pictures, music, etc.
    Now, I can't plug all of these drive's in at once. So, let's say I have to do a backup and I have nothing plugged in but the time machine external hard drive. Will it only backup the two hard drives that are in my computer and then later somehow let me go and restore the other drives? Or will it attempt to restore all 4 drives at one time? Because if the one in my computer mess's up, the other's may not be messed up and I do not want it to restore those.
    I have used Time Machine before to restore my system. But never since I have started adding extra drives for Time Machine to backup.
    I am also planning on adding, yet another drive for it to backup which is a 1TB portable hard drive that I keep raw files on for photography. I'm just curious how this works when and if the time comes.

    well superduper is FREE, CCC isnt.........CCC can do the daily updates etc,.  Superduper DOES NOT.    the CCC and Superduper CLONES are bootable.......so, if your HD crashes, you can throw in the CLONE, and youre back and running in mins, rather than hours etc .
    You should NEVER consider a backup a "backup", ........2 copies is 1, and 1 is none.....always have 2 copies of important files / pics etc etc,......... DECADES of work have been lost by people who thought their stuff was safe because they had a (meaning 1) backup.
    Simplicity? Yes, Simplicity is my religion.    CLONE your HD with programs and settings, ......and use a 2nd HD updated daily / weekly etc (preferable 2 such 'seecond' harddrives, copies of each other) with all personal stuff / work / pics / vids/ documents.....
    superficially time machine is simpler,  "smack a button and everything backs up".......in REALITY however when it "all goes up in flames"................the pro method (and my method) is QUICKER and more reliable by far to get down and running.
    Ive restored other peoples from total crash and burns via Time machine.......and "my" way............my way always ends up faster by a mile. Also personal / work etc  files are kept autonomous to the system data / programs OS,.....as it logically should be.
    Time machine is the fastest incremental backup........but its as slow as paint peeling if you need it in case of a TOTAL CRASH.......wherein a bootable clone can be thrown in , in less than 20 mins.

  • Using Time Capsule with multiple Macbook Pro accounts

    I have had a 500 GB Time Capsule for a number of years, using it both as a router and hard drive.  I recently added a 2TB Time Capsule, which I plan to use exclusively for storage and the 500 GB Time Capsule for the router and to store the Time Machine backups.  When I only had the 500GB Time Capsule, I could switch between users on my Macbook Pro and still have access to the data that was stored on the Time Capsule without having to log the original user out.  I am finding that with the 2TB Time Capsule, that if I switch users not only do I have to log out the orginal user, but I also have to disconnect that user from the Time Capsule.  Is there anyway to setup the Time Capsule where I will not have to do this, as it is very tedious and time consuming.
    Thanks in advance.

    In the 5.6 utility there is an option to disconnect all users.. this should fix it in one go.
    Download and install the 5.6 utility.. it has far superior controls to 6.0 which is more a NOUN utility than VERB.
    A number of issues were introduced with Lion and 7.6 firmware on the TC..
    You can try going back to 7.5.2 firmware although the later Gen4 TC seem to not allow themselves to go back earlier than 7.6.
    The older and simpler TC.. might be better as a file store.. Open it up and put a 2TB disk in it.
    At least if that works.. well may as well use it.

  • Restroing from Time Capsule with multiple machines backed up

    Hi,
    I have a 1TB TimeCapsule that has been backing up a Powerbook G4 and a Macbook succesfully for almost a year now. My Macbook's HD recenty crashed and I am trying to restore from the TC after I had my hard drive restored.
    Problem is, everytime i go through the initial setup process the Assistant only displays the Powerbook G4 backups but not the backup for my Macbook.
    I can see the TC has the sparsebundle files for both machines but can't see m to get the migration process to pick up my Macbook.
    Anybody seen anything like this. I though I would get a dropdown that would allow me to select the backup i want to restore from.
    thanks

    So this time I proceeded with the initial registration without attempting to restore from the backup. Following this, I used the Migration Assistant and the backups for both my Macs showed up nicely. Have now succesfully restored my Macbook and everything is in place just as expected.
    Just one piece of advice if you go down this route is to use a different username from the one on your old Mac when setting up the new Mac. If not, during the Migration process it will ask you to rename your older account (the option to replace the duplicate account was greyed out strangely)

Maybe you are looking for