Italic species names in table of contents
Right, am writing my phd thesis in Pages '08, and (because my phd is about plants) the chapter titles contain latin names. According to some scientific convention, these need to be written in italics, and they are in the actual chapter titles.
However, when I create the TOC, the italics bit is not applied - can anyone tell me how I can apply italics to PART of the title, or tell the TOC to take over the style of the actual title?
Pages does quite sophisticated typesetting and certainly does ligatures and many combinations of typesetting.
That doesn't mean the T.O.C. function is very sophisticated however. It is largely automated and you can change the formatting of whole styled paragraphs but not down to the character level that you are looking for.
Best is to export the TOC text and bring it back in again as text that you can format.
Peter
Similar Messages
-
table of content in a landscape orientation.
I want to have in my table of content only image and the name of the chapter which is each to do.
my problem when I am draging an image to each chapter it copied it to all chapter although I am marking only the specifc chapter.
why? how can i overcome it?Are you using Microsoft word? Microsoft thinks the users are idiots. They put up a lot of pointless messages that annoy & worry users. I have seen this message from Microsoft word. It's annoying.
As BDaqua points out...
When you copy information via edit > copy, command + c, edit > cut, or command +x, you place the information on the clipboard. When you paste information, edit > paste or command + v, you copy information from the clipboard to your data file.
If you edit > cut or command + x and you do not paste the information and you quite Word, you could be loosing information. Microsoft is very worried about this. When you quite Word, Microsoft checks if there is information on the clipboard & if so, Microsoft puts out this message.
You should be saving your work more than once a day. I'd save every 5 minutes. command + s does a save.
Robert -
Table of Contents bookmarks not exporting to PDF (CS5)
I have a 200 page book made up of 15 documents. I've created a table of contents based on paragraph styles and the TOC generates and formats correctly. When I create the TOC, the Create PDF Bookmarks box is checked. When I export the whole book I've tried it with Create Tagged PDF checked and unchecked.
After I export to PDF from the Book palette, the TOC items are links (at least they give me the pointer-hand icon) but they don't go anywhere. The only one that does is the one in the same document as the TOC. (I have tried the TOC both within a chapter and also in it's own document with no other links in it). The behavior is the same in the Bookmarks pane - all are shown but only one works. I've looked at several of the bookmarks' Properties > Actions. It says its "Going to a page in another document" > (document-name-of-the-correct-chapter-but-with-pdf-instead-of-indd.pdf) > Page 1 (this is correct) > Zoom level: actual size.
This isn't right - it's pointing to an imaginary pdf that doesn't exist. It should be pointing to page X in the current document.
Here's what I've tried:
* restarting InDesign
* restarting my machine
* deleting the TOC and regenerating it
* generating the book with all documents open or all documents closed
* moving the TOC to its own document
* probably some other things I've forgotten in the struggle
All of the links and references in the individual documents are good.
I've looked around these forums and this seems to be an ongoing and unsolved issue for other folks using older versions. This is the closest I came to finding an answer but ended up with an Adobe employee logging it as a bug in 2009. Bookmarks not exporting from InDesign to PDF in CS4 By (c_goates)
So here's hoping there is some new information. I've been trying to get this to work for far too long and don't relish drawing bookmark boxes around all 55 of my text links.
Specs: Max OS 10.6.6, CS5 (Version 7.0)
Sorry this is so long, but details help, usually. Thanks in advance for any advice.There are some known problems with bookmarks and CS5 as well. As far as I know, the 7.0.3 update won't fix them, but it does solve some other problems, so you should install it.
-
Table of Contents vanishes when trying to update or regenerate in CS6
I'm working with InDesign CS6 on Windows 7 Pro 64-bit
This is an old, legacy document. Today, I needed to remove two pages, so of course, I need to update my table of contents and index. I had no problems with the index - it regenerated just fine. The TOC is another matter. I clicked Layout > Update Table of Contents. I got the message stating that the contents was updated. However, what actually happened was the TOC text vanished! And, it actually is gone because I can see two empty paragraph markers where the TOC used to be. I've tried regenerating it instead of doing the update. Same result - it's gone.
I'm still fairly new to InDesign, so I'm not sure what I can do to troubleshoot this. Any suggestions would be appreciated.Sounds like ID doesn't think there are any paragraphs with the style names you've selected for inclusion.
But I'm not a fan of direct conversion of legacy files because these sorts of things, or worse, happen a lot. Try this: Remove minor corruption by exporting -
I am planning my wedding and I have this huge Numbers document with 20+ tabs and I have plans to add many more tabs. Is there a way to create a table that has two columns: column 1= order that a tab appears, column 2=tab name? For example, my first three tabs are called Venues, Must Haves, and To Do List (in this order. I'd want this table of contents to be in the first sheet of the document, so it would be like sheet 1. Then I 'd want like the cells of column 1 to be like 2, 3, 4 (2nd, 3rd, 4th sheet in the document), and then the cells of column 2 to say Venues, Must Haves, and To Do List. I can make a tiny table of one cell in each sheet that I copied the name of the sheet and then do like a cell reference for column 2, but I'm having trouble w column 1.
There is no referential value for the order of the sheets, just the sheet name. Only two things I can think of to suggest:
Do the same thing for the first column that you do with the second (i.e. put a referential column in the same table as the Name and point to that).
Seriously consider using a word processor program. Numbers is probably the wrong tool. -
Microsoft Word-Table of Contents-Update Page Numbers
I am having trouble updating my page numbers within the Table of Contents in a Microsoft Word document. On a Windows machine, I would click to the left of the table and then click F9. On an Apple, that adjusts the brightness of the screen or modifies the screen if I accompany the F9 with the Apple or Function button. Does anyone know how to update the page numbers without creating a new Table of Contents?
LisaIn Mac OSX it is possible to change or create keyboard shortcuts for all applications as well as the system itself.
Go to +System Preferences > Keyboard and Mouse > Keyboard shortcuts+
Select the menu item for whatever application, in this case Dock, Exposé and Dashboard, click on the keyboard shortcut and change it to whatever you would like.
It will then work the next time you launch the application. If it is a menu item the name of the shortcut must match the menu name exactly. -
How to update a table of contents when the feature "update table of contents" is unavailable?
Hello folks,
I've been struggling all morning with this issue and am completely desperate.
First, some info:
- I am making a spanish versions of an english documents: everything in the original doc was then edited, including TOCs. What I got at first, was a first spanish document already filled with spanish content.
- I was not the primary creative of the document I'm workin on and am unable to get in touch with whoever that can be.
- My document is a 200 pages text only document, with 12 chapters and, at the beginning of each chapter, a specific TOC for that very chapter.
- Inside each chapter, there are only Sections and Subsections, no other style. Those are the two levels in the TOCs.
- There is also a General TOC at the beginning of the document: that one only shows the Chapter names and the page number where to locate them.
My problem:
- Somewhere along the way, from one doc to another, the TOCs stopped to update the page numbers automatically.
- Now I have sections and subsections that are shown in one page (for instance 204) but they actually are on page 135.
- When I try to update the TOCs, I stand on the TOC itself as I was told in many tutorials, but the "update table of contents" feature is unavailable, even in the main TOC at the very beginning of the doc.
It is like if I wasn't standing in the actual TOC, but there is no actual TOC anywhere that I could refer to.
What can I do? I am changing the wrong page numbers manually but, of course, that is not ideal... and it may become more and more tricky while I keep producing new documents each based on the previous one.
Any help will be much appreciated.
Warm regard from sunny Paris, France!
SashaYou've just confused me.
My understanding of how this is set up is that either:
This is a book, and there is a master TOC that includes all book documents and a document-specific TOC in each component file, or
This is a single file and there is one master TOC that includes all sections and a section-specific TOC that includes only the individual section.
In the first case, I think you would want two TOC styles set up, one that includes the chapter heads (if I understood how you said this worked) for the for the master, and you would include all docs in the book when you generate it, and a second style for the individual chapters, with the subheadings you want to include.
In the second case, it would be similar, but instead of only one style to cover the section TOCS, I think you would need to create a unique set of pargraph styles for the headings in each section (they can all be the same format, based one section, just with unique names), and then make a TOC style for each section that includes only the styles from that section.
OK, wait a sec. I just reread what you said: "Another thing: when the numbers are "linked" and updating well, they display indide a little box. Not a text box, but a kind of little frame around the numbers. That frame makes it imposible to delete just one number: when the TOC says that Section 6.1 is in page 135, for example, you cannot delete just the 5, it deletes, not just the 3 numbers, but also the doted tab."
I think these are NOT normal TOCs created by using Layout > TOC (but you could replace them with ones that are, if you set up your styles properly and the text you want to include is appearing on the pages). Those little boxes you mention sound like cross-references, which should update automatically without any intervention at all. Unfortunately, cross-refs can be flakey, especially if they point to another document. I'd open the cross-refs panel and see if you need to recreate a bunch of links. -
Adpatch Fail WithError Cannot Get Table Of Contents In Library File For Pro
I install EBS R12.1.1 on windows server 2003 R2 on the vmware station.
when I upgrade R12.1.3 adpatch the 9239089, it has the error,the log is belowing:
===============================================================
---ad----------------------------------------
Extracting object modules for product ad...
C:/oracle/PROD/apps/apps_st/appl/ad/12.0.0/bin/adlibout.sh: line 332: lib: command not found
adlibout: error: cannot get table of contents in library file for product ad
File name is C:/oracle/PROD/apps/apps_st/appl/ad/12.0.0/lib/adst.lib
Skipping to next product...
================================================================
I check doc[ID 335488.1], the problem is same as I.
and i do the steps in this document.
step1:
i check %JAVA_TOP%=C:\oracle\PROD\apps\apps_st\comn\java\classes,but there is not files loadjava.zip. so i copy it from C:\oracle\PROD\apps\apps_st\comn\java\lib; then i add the classpath on the setting of the environment variables in the system properties.
step2:
i check it has the lib.exe adst.lib fndst.lib and work correctly.
STEP3:
I don't know how can I do the following information:
+*<moderator edit - deleted MOS Doc content - pl do not post such content - it is a violation of your Support agreement>*+
Are there persons can help me?C:\Documents and Settings\Administrator>which lib
C:\mvcs\VC\bin/lib.exe
C:\Documents and Settings\Administrator>lib /nologo /list C:\oracle\PROD\apps\ap
ps_st\appl\ad\12.0.0\lib\adst.lib
adpcdlvl.obj
adpdrv.obj
adpvov.obj
adusnap.obj
aidrdf.obj
aidsql.obj
aifgms.obj
aiibas.obj
aijmgr.obj
aijmtab.obj
aijwrkr.obj
aiogfm.obj
aioora.obj
aiospawn.obj
aiuarg.obj
aiucef.obj
aiucmd.obj
aiufil.obj
aiulog.obj
aijtim.obj
ailreg.obj
aimrdb.obj
aiofrl.obj
aiojava.obj
aiopatch.obj
aipind.obj
aipini.obj
aiuoqg.obj
aiuora.obj
dmeef.obj
dmmcad.obj
dmmcon.obj
dmmffk.obj
dmmmax.obj
dmmmis.obj
dmmnew.obj
dmmobs.obj
dmmold.obj
dmmsrc.obj
dmmtar.obj
dmud.obj
adicep.obj
admfac.obj
admfrt.obj
adpact.obj
adpfil.obj
adpgbl.obj
adphist.obj
adpmisc.obj
adppmf.obj
adprdc.obj
adpver.obj
adsmisc.obj
adsugu.obj
aduattr.obj
adudbsn.obj
adufbb.obj
aduffk.obj
adufpk.obj
adufrt.obj
adufsq.obj
aduftb.obj
adufvw.obj
aiumem.obj
aiures.obj
aiusql.obj
aiustr.obj
aiustrg.obj
aiuval.obj
aiuver.obj
aiz.obj
dmecep.obj
dmesr.obj
dmmact.obj
dmmb.obj
dmmbi.obj
dmmcep.obj
dmmef.obj
aioenv.obj
aiofcp.obj
aiofdl.obj
aiofgg.obj
aiofgp.obj
aiofgr.obj
aiofls.obj
aiofsp.obj
aioful.obj
aiofvf.obj
aiofxx.obj
aioini.obj
aioproc.obj
aiosdt.obj
aiotime.obj
aiounl.obj
aipclien.obj
aipfind.obj
aifrdf.obj
aifrof.obj
aifunl.obj
aifvaf.obj
aifz.obj
aiicot.obj
aiidps.obj
aiierr.obj
aiiics.obj
aiiind.obj
aiiini.obj
aiiipb.obj
aiipdm.obj
aiispm.obj
aijcssd.obj
aijcsssm.obj
aijctrl.obj
aijhigh.obj
aijmjava.obj
aijmlist.obj
aiccep.obj
aicdb.obj
aicdgrt.obj
aicdind.obj
aicdprv.obj
aicds2.obj
aicdsyn.obj
aicdview.obj
aicfile.obj
aicintfc.obj
aicpar.obj
aicsave.obj
aictsu.obj
aidafc.obj
aidapp.obj
aidcfk.obj
aidcrt.obj
aidenv.obj
adufea09.obj
adufeat.obj
adufix.obj
adugbl.obj
aduhsh.obj
adum.obj
adumd.obj
adumef1.obj
adumef2.obj
aduoix.obj
adupln.obj
adurts.obj
admpmf.obj
admpmr.obj
admprn.obj
admpst.obj
adncep.obj
adpcfv.obj
adpfndld.obj
adphena.obj
adpintfc.obj
adpparr.obj
adppdep.obj
adptask.obj
adsenv.obj
adsha1.obj
admpmd.obj
admpbf.obj
admgri.obj
admd5.obj
admd.obj
admatr.obj
admart.obj
admamo.obj
admaln.obj
admabb.obj
admaac.obj
adino.obj
adifo.obj
addts.obj
addbs.obj
adcptch.obj
adcosd.obj
adcintfc.obj
adcfil2.obj
adcfil1.obj
adcds.obj
adccfl.obj
adapps.obj
adufea08.obj
adufea07.obj
adufea06.obj
adufea05.obj
adufea04.obj
adufea03.obj
adufea02.obj
adufea01.obj
aduf.obj
adue.obj
adudyn.obj
aducsfs.obj
aducd.obj
aduatcfg.obj
aduabb.obj
aduaaf.obj
adsrtr.obj
adsrpd.obj
adsrlo.obj
adsrln.obj
adxpfpps.obj
aduxxx.obj
aduxvw.obj
aduxtb.obj
aduxsz.obj
aduxsq.obj
aduxsn.obj
aduxpv.obj
aduxpm.obj
aduxpk.obj
aduxix.obj
aduxft.obj
aduxfk.obj
aduxco.obj
aduxbb.obj
adustb.obj
adussq.obj
adussf.obj
adusrt.obj
adusq2.obj
aduspk.obj
adusix.obj
adusfk.obj
adusbb.obj
aifpll.obj
aiflrv.obj
aiflnk.obj
aiflist.obj
aifif.obj
aifgov.obj
aifggd.obj
aifdrv.obj
aifcf.obj
aidz.obj
aidvao.obj
aiduic.obj
aidsws.obj
aidsiz.obj
aidora.obj
aidldf.obj
aidgrnt.obj
aidfgs.obj
aideva.obj
aiodxx.obj
aiocset.obj
aiocef.obj
aimz.obj
aimudb.obj
aimres.obj
aimras.obj
aimlld.obj
aimiup.obj
aimism.obj
aimini.obj
aimact.obj
ailtrf.obj
ailmisc.obj
ailifc.obj
ailfind.obj
aijtodo.obj
aijpkch.obj
aijpdep.obj
aijmres.obj
aiuext.obj
aitz.obj
aitwrt.obj
aitshp.obj
aitopt.obj
aitldf.obj
aitlang.obj
aitfile.obj
aitcom.obj
aitarc.obj
aipz.obj
aipvrs.obj
aipudb.obj
aiptest.obj
aiprpf.obj
aipres.obj
aiprel.obj
aippgrp.obj
aipodf.obj
aipmsob.obj
aipmisc.obj
dmusr.obj
dmus.obj
dmumn.obj
dmuef.obj
dmucom.obj
dmmuid.obj
dmmsr.obj
dmmp2.obj
dmmp1.obj
aijboth.obj
aiimm.obj
aiigce.obj
aiicfg.obj
aifgrp.obj
aifgfm.obj
aidjawk.obj
aiddua.obj
aiddgr.obj
aidafo.obj
aicdtab.obj
aicdseq.obj
aicdora.obj
aicdcons.obj
aduovw.obj
aduotb.obj
aduort.obj
aduoprc.obj
aduopk.obj
aduofk.obj
aduobb.obj
dmutt.obj
C:\Documents and Settings\Administrator>lib /nologo /list C:\oracle\PROD\apps\ap
ps_st\appl\fnd\12.0.0\lib\fndst.lib
fdfwtk.obj
fdplbr.obj
fdprep.obj
fdspwd.obj
fdssgn.obj
fdxidk.obj
fdxidr.obj
fdxsqk.obj
fdxsqr.obj
spnnt.obj
spnunx.obj
afdgfn.obj
afdrdb.obj
afdrrt.obj
afdrsc.obj
afmem.obj
afpcmn.obj
afpeim.obj
afpo.obj
afppqs.obj
afpsgc.obj
ccmsssvc.obj
fdfapi.obj
fdfchy.obj
fdfcom.obj
fdfdbg.obj
fdfdds.obj
fdfdfu.obj
fdfdtj.obj
fdfdvu.obj
fdffbu.obj
fdffds.obj
fdfffu.obj
fdffile.obj
fdffld.obj
fdffvs.obj
fdmenu.obj
fdparg.obj
fdpibm.obj
fdpperl.obj
fdprrc.obj
fdpsql.obj
fdpstp.obj
fdsecp.obj
fdsgbl.obj
afppur.obj
afpsec.obj
afpsm.obj
afpsmc.obj
afpsmg.obj
afpsrs.obj
afscp.obj
afspwd.obj
afupi.obj
afuprt.obj
ccmsup.obj
ccmsvc.obj
fdacv.obj
fdatat.obj
fdaupd.obj
fdfbpl.obj
fdfbtr.obj
xitdgmd.obj
xitdgme.obj
xitdgmi.obj
xitdgml.obj
xitdgmo.obj
xitdgmp.obj
xitdgmr.obj
xitdgms.obj
xitdgmz.obj
xitdin.obj
xitdmf.obj
xitdmp.obj
xitdoe.obj
xitdpa.obj
xitdpo.obj
xitdpr.obj
xitdpy.obj
xitdra.obj
xitdrg.obj
xitdsa.obj
xitdsp.obj
xitdus.obj
xitdwp.obj
stdafx.obj
usdccf.obj
usdfmv.obj
usdgpa.obj
usdhtml.obj
usdins.obj
usdmac.obj
usdmpe.obj
usdnt.obj
usdoaut.obj
usdos2.obj
usdpar.obj
usdspid.obj
usdstub.obj
usdtec.obj
usdwin.obj
usdxit.obj
wfcore.obj
wfdes.obj
wfext.obj
wffile.obj
wfidx.obj
wfldr.obj
wfldrf.obj
fdwask.obj
fdxapp.obj
fdxcls.obj
fdxdat.obj
fdxdcf.obj
fdxdsp.obj
fdxefv.obj
fdxext.obj
fdxfil.obj
fdxgvl.obj
fdxkmd.obj
fdxlcs.obj
fdxmc.obj
fdxml.obj
fdxnls.obj
fdxpii.obj
fdxprf.obj
fdxpst.obj
fdxqus.obj
fdxsqf.obj
fdxsql.obj
fdpsps.obj
fdpsqp.obj
fdpsra.obj
fdptls.obj
fdptmx.obj
fdpurq.obj
fdpvwr.obj
fdpwrt.obj
fdrcmp.obj
fdrfcmp.obj
fdrpbf.obj
fdrutl.obj
fdsarg.obj
fdsaud.obj
fdsctl.obj
fdsgtk.obj
fdsnxt.obj
fdssck.obj
fdhhlp.obj
fdidrv.obj
fdipth.obj
fdisqf.obj
fdllov.obj
fdndbc.obj
fdndcf.obj
fdnlng.obj
fdnwsc.obj
fdomsg.obj
fdowln.obj
fdpblf.obj
fdpbq.obj
fdpccr.obj
fdpcrc.obj
fdpdbf.obj
fdpdbg.obj
fdpdf.obj
fdpemon.obj
fdperi.obj
fdpevt.obj
fdpfqr.obj
fdpgcf.obj
fddxit.obj
fdefil.obj
fdfile.obj
afsxss.obj
afsys.obj
aftime.obj
aftimr.obj
afttf2t3.obj
afttflib.obj
afubtree.obj
afuddl.obj
afuepp.obj
afufld.obj
afugai.obj
afugli.obj
afulzw.obj
afusc.obj
afust.obj
afutim.obj
afvbt.obj
afvca.obj
afvpa.obj
afwaol.obj
afwdev.obj
afwevt.obj
afwgeo.obj
afpgpr.obj
afpgri.obj
afpgrs.obj
afpgsr.obj
afplog.obj
afpmir.obj
afpolg.obj
afpops.obj
afpoux.obj
afpoval.obj
afppio.obj
afppir.obj
afprcl.obj
afgfhdoc.obj
afgldbs.obj
afglpw.obj
afhtmhlp.obj
afifld.obj
afixfs.obj
afixfsb.obj
afixlh.obj
afixpic.obj
afixpm.obj
afixpmuu.obj
afixucf.obj
afixupgn.obj
afixust.obj
aflog.obj
aflutl.obj
afmath.obj
afmsg.obj
afoleaut.obj
aforg.obj
afgbox.obj
affntrep.obj
affntlst.obj
affntgen.obj
affile.obj
afenv.obj
afe.obj
afdwin.obj
afdtmp.obj
afdsrw.obj
afdsil.obj
afdict.obj
afdfrm.obj
afdf.obj
afdcx.obj
afdcpm.obj
afdacc.obj
afctx.obj
afcs2uni.obj
afcore.obj
afcharrp.obj
afpgip.obj
afpfsv.obj
afpfsc.obj
afpfs.obj
afpflx.obj
afpdwpur.obj
afpdpo.obj
afpdon.obj
afpdlk.obj
afpdbg.obj
afpcmt.obj
afpcc.obj
afpcbidi.obj
afpcat.obj
afpcal.obj
afstr.obj
afspc.obj
afslov.obj
afshape.obj
afsfld.obj
afpvpc.obj
afpufe.obj
afpucf.obj
afptstp.obj
afptmttp.obj
afptmi.obj
afptmc.obj
afptm.obj
afpspt.obj
afpsmf.obj
afpscg.obj
afprun.obj
afprul.obj
fdcpspn.obj
fdastr.obj
fdarux.obj
fdahmi.obj
fdacon.obj
cregkey.obj
ccmupi.obj
ccmsvcpg.obj
ccmsetup.obj
ccmrkey.obj
ccmppsht.obj
ccmoptpg.obj
ccmmndlg.obj
alroms.obj
afwsys.obj
afwpal.obj
afwlib.obj
afwkflw.obj
afwind.obj
fdpscm.obj
fdpsbm.obj
fdpsar.obj
fdprst.obj
fdprpt.obj
fdprmo.obj
fdprlk.obj
fdprhl.obj
fdpreq.obj
fdprcp.obj
fdpprn.obj
fdppev.obj
fdppbr.obj
fdpmst.obj
fdpmbr.obj
fdplnk.obj
fdpldr.obj
fdpimp.obj
fdphbe.obj
fdpgrq.obj
fduxit.obj
fduuid.obj
fdutkn.obj
fdutim.obj
fdusql.obj
fduopr.obj
fdumod.obj
fduli.obj
fdugwi.obj
fdugii.obj
fdugci.obj
fdueds.obj
fdudat.obj
fducst.obj
fducsq.obj
fdsxit.obj
fdstkt.obj
fdssvl.obj
fdssuq.obj
fdsssk.obj
fdssop.obj
spnvms.obj
spnos2.obj
spnmpe.obj
spnmac.obj
spndos.obj
gmalloc.obj
fpe.obj
flutil.obj
flup.obj
fllog.obj
flglob.obj
fldisp.obj
fldb.obj
flada.obj
fdxwrk.obj
fdxwho.obj
fdxutl.obj
fdxuar.obj
fdxtrc.obj
fdxtmr.obj
xitdgma.obj
xitdgl.obj
xitdff.obj
xitdfa.obj
xitden.obj
xitddt.obj
xitdcs.obj
xitdcp.obj
xitdbm.obj
xitdax.obj
xitdas.obj
xitdar.obj
xitdap.obj
xitdal.obj
xirnop.obj
wfrsp.obj
wfresg.obj
wfres.obj
wfomgul.obj
wfomgucn.obj
wfntf.obj
wfmutil.obj
wfmsiic.obj
wfms.obj
wfmlr.obj
afpprr.obj
afpprq.obj
afpprn.obj
afpprc.obj
afpperl.obj
afppcp.obj
afpiml.obj
afpi.obj
afpgrq.obj
afpgmg.obj
afpesa.obj
afperq.obj
afpeot.obj
afpejp.obj
afpcsq.obj
afpcrs.obj
afpcra.obj
afpbwv.obj
afpatn.obj
afixube.obj
afixft.obj
fdfkbt.obj
fdfkbr.obj
fdfkbp.obj
fdfkbe.obj
fdfkba.obj
usdsim.obj
fpep.obj
fpeb.obj
fdxver.obj
fduprn.obj
fduhex.obj
fdugpi.obj
fdssoa.obj
fdsrsp.obj
fdfwrt.obj
fdfwmsg.obj
fdfwin.obj
fdfwfld.obj
fdfweb.obj
fdfvsu.obj
fdfvgn.obj
fdfval.obj
fdfutl.obj
fdfupu.obj
fdftdu.obj
fdfstr.obj
fdfsrw.obj
fdfsdf.obj
fdfrfu.obj
fdfobj.obj
fdflop.obj
fdflist.obj
fdfkva.obj
fdfksr.obj
fdfkfu2.obj
fdfkfu.obj
fdfkds.obj
fdfgli.obj
fdfgcx.obj -
Multiple table of contents in document
Hi there,
I'm new in FM8. I recently received a document in FM8. The structure of the document is as follows:
Every file of the document corresponds to a chapter. Each chapter contains a table of contents for its subheaders and paragraphs.
Table of contents (here are the chapter from 1 to 10, only the chapters)
Next is Chapter 1 which include a small table of contents with all subheads and paragraphs (e.g. 1.1, 1.1.1 and so on)
The same goes chapter 2 to 10.
That's not all.
Chapter 7, 8, 9 and 10 are placed in different folders coresponding with chapters title. The rest of them (chapter 1 to 6) are placed all in the same folder.
For chapters 7, 8, 9 and 10 I manage to update the second table of contents (which contains subheads and paragraphs - e.g. 1.1, 1.1.1 etc.)
In the main folder which contains rest of the chapters there are TOC files for the main Table of contents and for the subeahds and paragraohs contents corresponding to each chapter. Here I have problems with updating them because when I open the book and update it only the main TOC will be updated. The problem appears when I create PDF. Because after creating PDF when I click on a chapter name in the TOC it will bring me to the chapter I want but when I click on the TOC for subheads/paragraphs nothing happened, except for chapters 7, 8, 9 and 10.
So, to be more explicit.
When I click on chapter 7 in pdf, acrobat will send me to the chapter 7 where I find another TOC in wich if I click on subead 7.3 it will send me to the page that includes subhead 7.3. Instead if I click on chapter 4 it will bring me to the page coresponding for chapter 4 but there if I click on subhead 4.3 nothing will happen.
I will attach an example of that PDF.
The file structure looks like that:
Chapter 7 folder:
- book
- TOC file for chapter 7
- chapter 7 (same structure goes for chapter 8, 9 and 10)
Project folder
- book (it contains all files from chapter 1 to 10)
- TOC file (the main TOC)
- TOC files for chapters
- chapters' files
Thank you. Any help will be appreciated.
Excuse my poor written english.
Trully yours,
Fagaras Codrut SebastianHi,
if you got an FM book which contains separate TOCs for each chapter, it was most likely created using either
- the Systec TOOLBOX (http://www.systec-gmbh.com/en/sites/toolbox.php) or
- FrameScript (http://www.framescript.com/) with an itl script named "DocToc" (http://www.i-frame.itl.info/i-frame-base.html, website currently only available in German)
Without these solutions, you won't be able to comfortably handle a book like yours.
Regards,
Bernd -
After reset Mail hangs w/spinning ball on "Reading table of contents"
This problem is on a 17" monitor Power PC G4, 256mb DDR SDRAM.iMac, half ball bottom, with Mail, with Systems 10.3.9
After Reset, Mail is hanging with the spinning beach ball on "Reading table of contents." Quite a few emails are being retrieved and placed in the Dock before the hang, and Mail responds to mouse commands up to the "hang." Then a Force Quit is the only way to proceed. Other programs run OK, with Mail "hung."
The reason for the Reset is that my daughter reads "fan fiction," and can go through a hundred pages in an hour, and the computer gets so plugged up that it takes FIVE MINUTES to retrieve, then display another Safari window. Empty Cache does not help. So, to get things back to normal, a reset is required. Something went wrong on this reset.
This happened once before, possibly with OS-X 10.2, and I was advised to delete a file somewhere deep in Systems, and Mail apparently made a "new" file and all was fine from then on. My "guess" is that Mail then makes a new "table of contents."
Anybody know what file to delete? Or any other advice? At the moment, I am getting Mail with another IMac, with System 10.2
iMac 17" "half ball bottom" 1 GHZ PowrPc G4 Mac OS X (10.3.9)Hello Jean.
When you use the term "reset", are you referring to a
computer restart?
On this PowerPC with 10.3.9, what is the hard drive
capacity and available free space?
If the problem Inbox mailbox is for a POP type
account, with the Mail.app quit and using the Finder
go to Home > Library > Mail > this account named
folder (named by the user name and incoming mail
server for the account) > INBOX.mbox.
Move the INBOX.mbox to the Desktop.
Launch Mail and if successful, a new (and empty)
INBOX.mbox will be created automatically by Mail
within this account named folder when receiving the
next message with this account.
This should allow the Mail.app to function properly
again while working on the old INBOX.mbox move to the
Desktop to recover the existing messages.
Control-click on the old INBOX.mbox moved to the
Desktop and at the menu window that appears, select
Show Package Contents.
List the package content file names and size of
each here.
I have had the same problem as Jean - did what you advised and now find mail runs find but need to rescue the old mail.
This is the package content of my old inbox:
content index 36 kb
content_index-computername.local-372 10.9 MB
info.plist 4 kb
mbox 939.1 MB
tableofcontents 1.5 MB
hope you can help me...
x
habibi -
Add section titles to "table of contents".
I am attempting to build a book from a Genealogical Generational listing that indicates the generation number at the beginning of each section. I also add that number along with the section page number at the bottom of each section. i.e. Generation 1 page n.
Is there any way to automatically pickup the section title to add into the "Table of Contents"?
Using my present method, highlight the section title, click "Paragraph Style" (edit to my preference); will show only page 1 for all section beginning pages and seems unprofessional. alternatively, I could just leave out the page number somehow and attempt to "Tab" the first page of each section. Basically, what I would like is:
"Generation 1
Generation 2" etc.... or something similar without page numbers and the section name is the page link to the first page of that section.
Tks
SparkgapperHi Sparkgapper,
Is this a Pages question? YOu are in the Numbers for Mac forum.
From your profile, is this an iWork '09 question?
quinn -
Is there a way to export the Table of Content?
We need to insert audio files to each slide. There are 127 slides in total, and we need to name each audio file using the corresponding slide's names. To do so, I think to have the Table of Content exported is a good way. Is there a way to do this?
we use Captivate 5.5.
Thank you.Hi there
The TOC is unique for each project. I fail to see how an ability to export one TOC and import into another project would help in any way.
Cheers... Rick -
Cdparanoia 004: Unable to read table of contents header
Hi. I've been trying to rip wavs with grip but it was unable to locate any audio cd even though I could explore it from my desktop (xfce 4.10) and I am part of the optical group. Because of this, I tried running cdparanoia from the terminal.
Running the next command: cdparanoia -vsQ displays the next warning:
cdparanoia III release 10.2 (September 11, 2008)
Using cdda library version: 10.2
Using paranoia library version: 10.2
Checking /dev/cdrom for cdrom...
Testing /dev/cdrom for SCSI/MMC interface
SG_IO device: /dev/sr0
CDROM model sensed sensed: ASUS DVD-E616P3H 1.04
Checking for SCSI emulation...
Drive is ATAPI (using SG_IO host adaptor emulation)
Checking for MMC style command set...
Drive is MMC style
004: Unable to read table of contents header
Unable to open disc. Is there an audio CD in the drive?
if I try to listen a track from an external application like mplayer it won't play any audio but if I manually locate the audio and choose them an application to play, they will. Also, the hardware itself is functional since I ripped music from a debian squeeze (dvd) installation.
Finally If it's useful, I used gvfs and exec ck-launch-session dbus-launch startxfce4 in my .xinitrc to mount usb and other devices automatically
Thanks in advanceYou removed all mailboxes (.mbox files) located within this problem account named folder at Home > Library > Mail and the same occurs when re-launching Mail?
The TableofContents file is a package file for a .mbox so it is hidden.
I'm not sure how you removed all mailboxes for this account but quit Mail first and using the Finder, go to Home > Library > Mail > this POP account named folder (named by the user name and incoming mail server for the account). Move the account named folder to the Desktop.
Launch Mail and if it launches successfully without locking up and quitting, a new account named folder will be created automatically by Mail within the account named folder.
All email clients have limits and the recommended size limit for a Jaguar or Panther mailbox is 1GB and for Tiger Mail, 2GB.
An "overstuffed" mailbox issue can occur at any mailbox size (which means the mailbox has some corruption and/or is over the recommended size limit) but is more likely to occur depending on the number and size of message attachments contained in a mailbox and especially as a Jaguar or Panther mailbox approaches or exceeds 1GB in size.
Since an account's Inbox mailbox is usually the most active mailbox, it is not a good idea to use an account's Inbox mailbox as the final storage location for all received messages not deleted. -
Table of Contents (.hhc) Not displaying in Web browser
Hi,
I have just upgraded Robohelp Version 7 to 9.0. I have table of contents(.hhc) in the left frame and "Updates_and_Revsions.htm" in the right frame. After my first TOC update in the Robohelp version 9.0, i am not able to see anything in my left frame. It is blank.
After basic research I was able to figure it out that .hhc was converted into XML file. Here is the code (I have long TOC so i am copying only first few). I am using internet explorer 7.0.
******Previous Code********
<html>
<!-- Sitemap 1.0 -->
<object type="text/site properties">
<param name="FrameName" value="right">
<param name="SiteType" value="toc">
<param name="Window Styles" value="0x800003">
</object>
<ul>
<li><object type="text/sitemap">
<param name="Name" value="DFC On-Line Help Contents">
</object>
<ul>
<li><object type="text/sitemap">
<param name="Name" value="Updates & Revisions">
<param name="Local" value="Updates_and_Revisions.htm">
</object>
</html>
*************New Code*************
<?xml version="1.0" encoding="utf-8"?>
<toc version="1.0">
<properties framename="right" windowstyles="8388611">
</properties>
<item name="DFC On-Line Help Contents">
<item name="Updates & Revisions" link="Updates_and_Revisions.htm">
</item>
<item name="Introduction">
<item name="Introduction" link="DfcIntroduction.htm">
</item>
</item>
</toc>
Please advise,
I will really appreciate your help.Can you give us some more information? Is the issue in your output? If so, what type of output is it? Is the problem just with one project - try creating a new one.
-
Change the table of contents in Adobe Presenter 9
It appears that Presenter automatically creates the tables of contents for a Powerpoint presentation based on the slide title. Is there a way to modify the name that appears with a TOC navigation without changing the slide title?
I would also like to know if it's possible to structure the TOC so that there are main topics and sub topics. For example, in Captivate, you can modify the TOC by clicking on the arrows in the menu to push categories under one another, like an outline:
Main Topic
Subtopic Slide 1
Subtopic Slide 2
Main Topic 2
Subtopic Slide 1
Subtopic Slide 2Presenter doesn't have the same functionality for the TOC as Captivate. There is some wizardry that can be done if you want to adjust the look of the slide list.
Work around was discussed in this thread: http://forums.adobe.com/message/1970468#1970468
Maybe you are looking for
-
Errors when Creating Aggregate Tables in OBIEE 11.1.1.6 within SQL server
Hi All, I was trying to create an aggregate table in OBIEE 11.1.1.6 within SQL Server. The sql was generated successfully as below. But an error occurred when I use NQCMD to execute the sql and the following error showed: 1. SQL for creating Aggregat
-
Using Flash's xml.sendAndLoad behind a proxy
We have a product that uses Directory and Flash to collect data and then we send that data to a web server via a soap call. We had been using an external perl script to do the soap call for many years and are wanting to move the code in to Flash or D
-
Webservice Consumption from ABAP without XI
Hi Experts, Im trying to consume a webservice which I got from ESB(IBM) team. Basically I got a wsdl file. First I have created a proxy from SE80 by uploading this wsdl file and I have activated sucessfully. Second from SOA Manager I have created Log
-
MacBook Pro -Touchpad & Keyboard Frozen - Can't Unlock
After last using my 13" MacBook Pro, I closed the lid to put it into sleep mode. When I opened it back up the next morning, I get the screen display, but both the touchpad and the keyboard are frozen. I can't type in my password and thus can't full
-
Configuration of system to install BW and R/3?
Hi, What is the minimum configuration to install SAP BW on a PC, Does AMD 1.2 ghz system with 1 GB RAM and 200 GB hard drive is ok? And also if the above configuration work if we like to install R/3 on similar system? Thanks. Syed Arifuddin. NOTE: Th