Italy Country Billing Number Range

Dear Experts,
We are currently working for Italian Client and in billing system to determine the number ranges in billing based on the financial year.  This requirement is legal as per client.
Example
01 2007  000000001     to 999999999
02 2008  000000001     to 999999999
Please guide how to full this requirement for SD Billing
Regards
Goutham

Hi,
Looks little complex. But I am not sure if the client agrees to this.
1. Check with the client how many invoices in all would be created in a year.
2. Based on that create the number ranges with serial number. Let us suppose in a year ur customer raises invoices to the tune of 45,000 thousand. Let the no. range be as below
Y1 1000000 to 1050000 this is for year 2009.
Y2 1050001 to 1100000 this is for year 2010.
Y3 1100001 to 1150000 this is for year 2011.
And at the end of the every year with out fail u have to stop all the billing and change the billing document serial number and transport this request to production, so that year after year the system picks up number ranges from new series.
One more thing is that you cannot maintain the year in any place.
Check if this helps.
Kind Regards
Chakradhar
Edited by: Paturi Chakradhara Rao on Jul 29, 2008 11:58 AM

Similar Messages

  • Different Billing Number Range

    Dear All
       My client want different billing number range
       Example for vehicle sales ( sales area 6100,61,60)
                     For spares sales (sales area 6300,61,60)
        For credit memo want different billing number range ,please guide me ,how i can maintain the different billing number range.
       and how should i maintain different accounting number range which is same as the billing number range.
    Thanks and Regards
    Bhushan

    Hi Bhushan,
    If you want different number range as per the standard
    -->You need to define two different billing document types for two sales areas in VOFA transaction
    -->You define two different number ranges in VN01 transaction
    -->Assign that number range to the document types in VOFA transaction.
    -->Take help of FI people to define the number range for the accounting document as per your requirement in OBA7 transaction.
    If you want the number range based on the sales organisation then you need to use the User Exit with the help of ABAPer.
    Try With this User Exit.
    USEREXIT_NUMBER_RANGE_INV_DATE (Module pool SAPLV60A, program RV60AFZC)
    Depending on the number range, table TVFKD is used to set the billing date (country-specific requirments in Italy). USEREXIT_NUMBER_RANGE is automatically deactivated when this user exit is being applied.
    I hope it will help you,
    Regards,
    Murali.

  • Alphanumeric billing number range

    Hi
    In billing number range(VN01)  can we define alphanumeric number like AB07089999 or only numeric.
    Regards
    debasish

    Dear Debasish,
    You can't maintain alphanumeric number for internal number range.
    If you select External number range system will accept alphanumeric number also but for billing document external number range not advaisable
    You can try with the User Exit with the help of ABAPer
    Try with these User exits,
    USEREXIT_NUMBER_RANGE (Module pool SAPLV60A, program RV60AFZZ)
    The internal number range used in the standard system is specified
    in the billing type table and can be changed in this user exit. This
    user exit is only called when the billing documents is created.
    USEREXIT_NUMBER_RANGE_INV_DATE (Module pool SAPLV60A, program
    RV60AFZC)
    Depending on the number range, table TVFKD is used to set the
    billing date (country-specific requirments in Italy).
    USEREXIT_NUMBER_RANGE is automatically deactivated when this user
    exit is being applied.
    I hope it will help you,
    Regards,
    Murali.

  • Billing Number Range problem ( accounting document not generated)

    Hi All,
    I have created some billing types and for them I have assigned some internal number ranges. Now when I create a billing document it is getting saved with the proper number range but no accounting document is getting generated.
    Also when I try to release the invoice I am getting an error which says " *Incorrect doc.no.: 10000009. Select document number between 0090000000 and 0099999999* "
    K I N D L Y     suggest  as U R G E N T.
    Regards,
    Danny.

    Dear,
              Billing Number Range problem ( accounting document not generated) is not an error because when you create billing document then accounting document not generated. Accounting done after posting of that billing document with VFX3 or VF02 T.Code by account department.
               And for second issue you had define number range between 0090000000 and 0099999999 for invoice so thats why it happen.
    Regards,
    Sandip Shaktavat

  • Maintain Billing Number Range according to Sales Organization / Plant

    Hi,
    How to create Billing Number Range according to Sales Organization / Plant wise...
    Please guide..

    Hi SAP~MM 
    It can be developed through Z Table.Take the help of your Abaper.Check this below link it is useful for your issue
    Number ranges
    Plantwise number ranges
    Let me know if your problem is solved
    Regards
    Pradeep

  • Invoicing billing number range and Accounting billing no range

    Hi
    Want to know the Link between the Invoicing billing number range and Accounting billing no range
    Link between the two no ranges if any
    Rohit

    Hello,
    There is no link between the Accounting document and the Billing document
    Billing documents number range were maintained in VN01 and the Accounting document number range were maintained  i n FBN1 for each financial year against the company code
    If you want the same Number to be generated for both , then
    Use T. code VOFA and check billing document type and itu2019s assignment for Accounting document type for example for billing document type accounting document type is RV and check the number range for billing document type through T. code VN01 and then use T. code OBA7 to see number range object for accounting document and then finally use T. code FBN1 and maintain same number range as per billing document type and mark as external number range then system will generate same accounting document number against billing document after releasing the billing document to accounting
    Thanks,
    santosh

  • Re: Billing number range

    Hi
    In  billing the number range defined for my client is for 10 years.but now they want to maintain it for yearly basis. So if i create a new no. range in VN01 and this new range i wiil assign to Z Billing type, will this new number affect any other module, particularly in  FI side.So what are the testing should i do to check whether it is working fine or not?
    regards
    Debasish

    As long as the billing Number range is different from the Fi number range there wouldn't be any problem in the running .........
    Check for the FI number range for the accounting and profit centre and cost centre documents.with fi consultant
    regards,
    Amlan Sarkar

  • Commercial Billing Number Range

    Dear All,
    Commercial Billing Number Range can be year Specific ?(vf01).
    If yes at present in my system its not year  specific how can i do it year specific ?
    Regards,
    Nik

    Hi,
    No dear,it is not year specific.Only FI documents are yser specific.
    Although it can be done by creating a Z number range object and marking it as year specific.
    But if not urgent don't go for it.
    I had done the same thing but it brings lot many issues afterwords.
    Reward points if useful
    Regards,
    Amrish Purohit

  • Billing number range problem

    Hi all,
    Earlier we were getting same document no.  For Billing document and FI Document for Billing VF02 but since last few documents the numbers are not coming same for Billing and Accounting documents, please advice.

    Hi
    Use T. code VOFA and check billing document type and itu2019s assignment for Accounting document type for example for billing document type   accounting document type is RV and check the number range for billing document type through T. code VN01 and then use T. code OBA7 to see number range object for accounting document  and then finally use T. code FBN1 and maintain same number range as per billing document type and mark as external number range then system will generate same accounting document number against billing document after releasing the billing document to accounting.
    Regards,
    Shailesh Verma

  • Error in billing number range interval.

    Hi,
    I created a new billing type. I assigned the number range properly. But at the time of billing document generation, system is throwing a message "For object RV_BELEG , number range interval  doesnot exist". I have checked in 'SNRO' against the object type 'RV_BELEG' , the number range interval that I have assigned for the new billing type is existing there. Still the error is coming.
    Please suggest what needs to be done.
    Thanks & regards,
    Rupam.
    Edited by: RUPAM KR SEN on Mar 21, 2011 10:46 AM
    Edited by: RUPAM KR SEN on Mar 21, 2011 10:47 AM

    Hi Samit,
    Thanks a lot for your suggetion. There is an user exit but with different program name in our system. Due that user exit the  customizing done by me was not working properly. The exit has been deactivated and now it's working fine.
    Thanks & regards,
    Rupam.
    Edited by: RUPAM KR SEN on Mar 21, 2011 1:56 PM

  • Billing number Range to be extended?

    hii
    experts
    i have an error during running the biling j1iin for excise . During the time of saving the error giving is number range is finished .plz help me out how to extend the number range
    thanx in advance

    hi,
    hope this helps.
    1. T Code SNRO
    2. Select object relevant for billing
    3. in that object select the number range you were using
    4. If the number range is frequently used and same number range has to be extended then extend the number range by a substantial amount.
    e.g - if its a regular invoice then increase by a lakh .
    5. Make sure that the number range is not used anywhere in this object.
    6. Good prcatice is to already allot a number range for this with a diffrent name so that it can be used later.
    thanks
    swapnil

  • Billing number range

    Hi,
       I have scenario sequence like Order type: ZES1, Sales area (1001-10-11) & plant 1002 and another Order type is ZES1, Sales area (1001-10-12) & plant 1002.Different of two sales area : 11 is defined for Hand pump division & 12 is defined for Drip division.Client requirement is they will be same Pricing procedure "ZINIMP" both for Order type ZES1 and when they will raise Billing document at that time it should be picked up different number range, e.g, 21108001 & 41311001 but it is picking up 21108001 & 21108002. How system differentiate the No.range and where ? request for quick response.
    Regards
    Jibanjyoti

    you need to define 2 number ranges as your requirment and assign in VOFA billing type one, next one will pick when division is "12" You can change billing document number range in your billing user exit, take abap help in development.
    USEREXIT_NUMBER_RANGE, Module pool SAPLV60A, program RV60AFZZ
    check this llink for more infor
    http://saptechsolutions.com/pdf/SDDocumentNumberRangeEnhancements.pdf
    Edited by: ram ki on May 20, 2011 11:54 AM

  • Billing Number Range Buffer

    Hello Gurus,
    Where do we set Billing document Number range Buffer?
    Let me know the transaction code where I can set the buffer for Billing document Number range Buffer.
    Regards
    PVR

    Hiiii
    Commericial Invoice Number range is not as per the Company Code. It is general number range which is handled through assignment of your billing document type
    But Accounting document number range is Company code and year specific (T-Code = FBN1)
    Regards
    Shambhu Sarkar

  • Billing number range changes when change incoterms

    Hi,
    I have a scenario in which i create invoice, then create credit memo request with respect to that invoice, and then credit memo.
    While doing this if I dont change my incoterms then all the functions happen successfully.
    But as soon as i change my incoterms which are location bounded, the number range of my credit memo changes and hence i cannot create accounting document and complete the process.
    Even in this case my credit memo request number is correctly generated, only teh credit memo number range differs.
    Please tell me if you need any further infor for solution.
    Does anyone have any idea on this?
    regards,
    Siddharth.

    Please check program RV60AFZZ, in form USEREXIT_NUMBER_RANGE the number range can be changed.
    /Torben

  • Billing Number Range /Sales Documents Numbering Range

    HI Friends
    HI Friends
    I would like to control Numbering Range  Year Wise  Like 2008-2009 Should be Started Numberings Range From  10000000 TO  2000000 (2008-2009) , 30000000 TO 40000000 (2009-2010) Automatically. How we can control in this scenario.
    Regards,
    Udhay

    Unlike FI (RF_BELEG) and Excise (CIN),  in SD (RV_BELEG) fiscal year is not part of the number range.
    Your requirement is not possible as such.
    During closing you can change the last number to, say 199999, so the next document fetches the number 200000. But the user can make a document in year 2009-10 with document date in 2008-09.

Maybe you are looking for