Item already locked by user error
Hi, I am getting the problem item already locked by User error when i try to edit a user idm 6.0 So, any solution for this?
The basic reason for this error is the object you are trying to access is already locked by another user (helpdesk/ proxy user or admin).
Generally you can check the lock status who has the active lock on the object from the lh console also.
http://identitycontrol.blogspot.com
Similar Messages
-
Serial Number is already Locked by User
Hi,
We have ISU Material where Serialization Profile is activated system. We create Serial Number Automatically when we do the MIGO. The System is giving me a error that " Serial Number is already locked by User".
If I enter quantity say for Example 9000 in the quantity field, system is allowing 7000 and 2000 it is throwing me the above error.
I have also unchecked Lock for Internal Assignment of Serial Numbers in SPRO settings of Plant Maintenance Module, which results in increase the acceptance number from 3000 to 7000. But beyond that it is an issue.
Please help me
Thanks
SubcIt could be possible that the user exited the system abruptly.. try using SM12 and unlock the table for that user name
-
WORKS ITEM 565556 LOCKED BY USER (ENQUEUE)
Hi
Im having a problem with workflow,
message appearing as follows, i dont know which user it is?
WORKS ITEM 565556 LOCKED BY USER (ENQUEUE)Hi,
Check in SM04 Trxn code whisch user has locked/using.
Reg,
Ashok -
Hi
When I am doing the MIGO for PO which is having 30000 quantities and when I am assigning the Serial No then I am getting this error - 'Serial Number is already Locked by User' but actually this Serial No. is not being used by other person.
Please suggest something how to proceed.Hi Sean,
the below mentioned notes is how to unlock it.
Goto SE11 and select the Lock Object radio Button. Click on F4
you will see a popup asking to enter the Lock Object.
Now Click on the + symbol ( which will show you further select options)
Now enter the Base table. it is the Table which you have the Searial Number(Master data)
and Hit enter. It will show you all the Locks existing for that table.
Now Select the Lock which is locking the Serial Number.
Now goto your code. from the pattern button Call the FM as DEQUEUE_Lock_object
Hope This helps.
Thanks. -
Hi ,
When Iam trying to run a ASO cube which has 22 dimension thru .msh which will refresh the outline and then loads the data i.e full load. Iam facing this below error
WARNING - 1053010 - Object [cust] is already locked by user [abc].
I tried by unlock the rule files its not working out. Could you please help me what would be the problem ?
Thanks in Advance,
Raj.I am suddenly getting the same error (started last week) during my scheduled cube builds. I have all the above commands in my script. There are no users logged in and no objects. The error is actually stating that the current user (the id used for the cube build) has the object locked. This occurs every morning on all my daily cubes. When i manually execute the cube build scripts after the error occurs, they work fine. Some additional notes. The Server is brought down every night and is brought back up every morning at 5am. The cube builds kick off at 7am. I cannot figure out what could be causing this, since it's been working fine for the last couple of years.
-
Passwordsync direct method giving error 'already locked by 'Configurator''
Hi idm Gurus
When I am changing the user password from Idm Admin interface user receiving the pwsync failure email and notifying 'com.waveset.exception.LockedByAnother: Item User:35365 already locked by 'Configurator''
where as password successfully changed for the user
Is there any way that I can eliminate to get this error message to user?
Please help me.Hi idm Gurus
When I am changing the user password from Idm Admin interface user receiving the pwsync failure email and notifying 'com.waveset.exception.LockedByAnother: Item User:35365 already locked by 'Configurator''
where as password successfully changed for the user
Is there any way that I can eliminate to get this error message to user?
Please help me. -
Error on nexus 7k series " operation failed.the fabric is already locked"
getting following error on nexus 7k series switch: error is " operation failed.the fabric is already locked", while removing ntp commands (no ntp server 10.101.1.1) from switch. Please help.
I had the same error message, only in my situation Outlook would only open successfully every 4 or 5 attempts. When Outlook would open (versus just hanging at the splash screen), I would get two dialog boxes with the warning/error message.
After I clicked okay I could get into Outlook.
Previously I experienced this problem running my Office 2010 client with my Exchange 2007 mailbox on my old laptop. The problem followed my mailbox through an Exchange 2010 migration (so new Exchange org), client upgrade to Outlook 2013, and a new
laptop (so I knew it wasn't a corrupt profile). This led me to the conclusion that it was a corrupt item(s) in my mailbox.
To resolve the issue, I archived *everything* in my mailbox to a PST file, ran SCANPST to fix the corruption, and then uploaded everything back into my Exchange mailbox one folder at a time, stopping after each folder to close and restart Outlook so I could
narrow down which folder had the corrupt item if the problem recurred. I'm happy to say my issue is now resolved. -
I am trying to install iTunes 12.0 on my Windows 7 PC to sync my iPhone6. I am getting error message, "Item already exists" on installation of iTunes 12.0. Apple has no fix. Help???
Item or object?
For "Object already exists" or "Access denied" errors when installing try opening Control Panel > Programs and Features > View installed updates then checking for Security Update for Microsoft Windows (KB2918614). Uninstall if you have it, then reboot and try installing again.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2 -
Error in SMQ2 - Object requested is currently locked by user ...
HI together,
we send IDOCs from SAP R/3 through XI into an other SAP R/3 system (ORDERS). all messages will be processed but only 2 messages are get stuck in XI with the error message:
"Object requested is currently locked by user" in SMQ2.
Do anybody know a solution for that?
If i trigger the IDOC in WE19 again, the same error occurs again and again.
Many thanks
AlexHI together,
very strange happening!!
i check the mapping of the error message and found out that we have a used a multiply function in the mapping (quantity * price). we have a price > 100000.00 and a quantity of 3. In testtab the mapping runs and runs and runs... nothing happens.
i created u UDF that solve the problem. i do not know why this is needed or what is wrong the the SAP standard mapping function.
Unfortunately we have this issue only in production, not in DEV or QA.
cheers,
alex -
In ercmrepl getting error "Business partner is currently locked by user" and contract has not been replicated in crm
Hi
This error occurs generally when some other user is currently editing the BP involved
in the contract.
Please re-process the BDoc again so that it will complete the process.
Let me know the BDoc status if it is still not working.
Thanks
Arun -
Update Error: No access permission as table is already locked
Hi All,
I am trying to reload work order master data but keepp getting the update error "No access permission as table is already locked". I have looked at sm12 but no lock entries found.
Pls advice.Hi Ola,
Have you checked RS12 tcode for master data locks?
Best regards,
Eugene -
OEDQ Jobs erroring - Error Code: Cannot acquire lock, already locked
Hi experts
our Real time Individual match job is erroring out with above error code. Real time Individual clean and Real time Individual Cluster are working fine. What could be the reason for this?
(log file extract:
SEVERE: 06-May-2013 14:54:39: Cannot acquire lock: already locked (Code: 207,002)
com.datanomic.director.missionmanager.exceptions.MissionExecutionException: Cannot acquire lock: already locked (Code: 207,002)
at com.datanomic.director.missionlieutenant.plan.MissionExecutionPlan.execute(MissionExecutionPlan.java:961)
at com.datanomic.director.missionlieutenant.executor.MissionExecutor.runMissionNow(MissionExecutor.java:205)
at com.datanomic.director.missionmanager.manager.MissionManager$3.run(MissionManager.java:537))
second question:
we do have setup OEDQ for key generation (Our Siebel OCH is on 8.1.1.10). When we run Siebel Key Generate jobs on Contacts and Accounts, we do get records created in SIEBEL.S_DQ_ORG_KEY and SIEBEL.S_DQ_CON_KEY. Is this table where they are supposed to be generated?
third question:
Does Siebel OCH support Address matching?
more questions to come in near future
THANKING YOU IN ADVANCE!!
rgrds
m
Edited by: user3035423 on 6.5.2013 8:18Hi Nick. thanks for your reply.
I am newbie to the OEDQ. When you say that proces is open in Director, what does it mean? How can i close it?
In order to overcome this situation i did
1. stop datanomic service on Win2003 server
2. started Job Main Initialize reference Data in EDQ-CDS - initialize Reference Data project and waited to finish
3. started Job Real- time START ALL in EDQ-CDS project
4. this is the step where some of the jobs are errorong out, as stated before
From above to mee it looks like there should not be any process open in Director.
can you please share your thoughts
thanks
rgrds
m -
Getting error - Node is not locked by user weblogic.
Hi i am getting the following error when i am editing the node which is present in weblogic portal.
I am getting this error when i am checking in the node.
com.bea.content.RepositoryException: Node is not locked by user weblogic.
at com.bea.content.virtual.internal.server.bean.InternalWorkspaceOpsBean.validateCheckedOut(InternalWorkspaceOpsBean.java:2144)
at com.bea.content.virtual.internal.server.bean.InternalWorkspaceOpsBean.handleWorkflowActions(InternalWorkspaceOpsBean.java:429)
at com.bea.content.virtual.internal.server.bean.InternalWorkspaceOpsBean.internalCheckIn(InternalWorkspaceOpsBean.java:417)
at com.bea.content.virtual.internal.server.bean.InternalWorkspaceOpsBean.checkIn(InternalWorkspaceOpsBean.java:340)
at com.bea.content.virtual.internal.server.bean.WorkspaceOps_xe5vix_ELOImpl.checkIn(WorkspaceOps_xe5vix_ELOImpl.java:1760)
Truncated. see log file for complete stacktrace
I am using IVersionManager.checkin(context, nodeId, content) method.
Portal version - 10.2
Thanks
AnkurAnkur,
In order to check-in a piece of a content, it must be checked out by the user trying to check in. Have you checked it out first? Check-out is similar to marking a file for edit in a source code control system.
-Ryan -
CIF queues - Lock not possible error in application log
hi,
Below is the application error log from SLG1
Looks when R3 is sent CIF queue, could not be processed at APO, due to lock not possible. It looks, the object is already locked.
This happens only certain hours only. We searched in batch jobs etc across landscape, but no luck.
We are currently checking, if this could be due to some issues with LiveCache processing.
Any input would be helpful.
SLG1 - Application log errror:
Source system: sapapp80 user: R3CIFRFC transaction: function module: /SAPAPO/CIF_CLAF_INB
Access block: data from system CLAF updated again
Lock not possible for charc at FM claf_inb:000000000100020361G21C02244Z
Object is locked at present
Thanks,
RajkSHi Raj,
Pls check the table CIF_IMOD details in R3 System,if 2 IM running with the same object we use to get these kind of
locking issue.
also check the workprocesses details during those time. whether you have enough space to process the reqd the
t-data.
Regards
DPS -
BDC in user exit CONFPP05 - Material already used by User
I have requirement to create 551 movement Scrap from CO11N tcode whener user enters value for 'Yield' and 'Reason for variance' and press save button( Post).
I am unable to use BAPI because BAPI_GOODSMVT_CREATE (GMCODE 03= MB1A) since 551 mvmt can be done only through custom Tcode ZMB1A due to customization. Only option left was calling BDC for ZMB1A ( Call trasnaction been used) .
Problem:
BDC works outside as report program , but hen I call FM ( BDC) within userexit , it says Material lock by the user( Which is Me).
Calling from UserEXIT CONFPP05
CALL FUNCTION 'Z_POST_SCRAP_GI' ( Nothing but BDC call tran)
EXPORTING
MODE = 'N'
UPDATE = 'L'
bwart = mseg-bwart
werks = mseg-werks
grund = mseg-grund
lgort = afpo-lgort
matnr = mseg-matnr
erfmg = mseg-erfmg
erfme = mseg-erfme
aufnr = afpo-aufnr
TABLES
MESSTAB = MESSTAB .
This one works as report and not inside Userexit ( Returs errmsg already used by User which is myself).Here is the Dump, I am taking about after calling FM with Update Task
Category ABAP Programming Error
Runtime Errors POSTING_ILLEGAL_STATEMENT
ABAP Program SAPLY_FGRP
Application Component Not Assigned
Date and Time 03/06/2012 11:55:13
Short text
Statement "CALL TRANSACTION" is not allowed in this form.
|What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLY_FGRP" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
There is probably an error in the program
"SAPLY_FGRP".
This program is triggered in the update task. There, the
following ABAP/4 statements are not allowed:
- CALL SCREEN
- CALL DIALOG
- CALL TRANSACTION
- SUBMIT
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"POSTING_ILLEGAL_STATEMENT" " "
"SAPLY_FGRP" or "Y_ZMB1A_BDCREXCY"
"BDC_TRANSACTION"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
Source Code Extract
Line
SourceCde
27
HOLDDATE = P_HOLDDATE.
28
ENDIF.
29
*ENDFORM.
30
31
32
end batchinput session *
33
34
*FORM CLOSE_GROUP USING P_CTU LIKE APQI-PUTACTIVE.
35
IF P_CTU <> 'X'.
36
close batchinput group
37
CALL FUNCTION 'BDC_CLOSE_GROUP'.
38
ENDIF.
39
*ENDFORM.
40
41
42
Start new transaction according to parameters *
43
44
FORM BDC_TRANSACTION TABLES P_MESSTAB
45
USING P_TCODE
46
P_CTU
47
P_MODE
48
P_UPDATE.
49
DATA: L_SUBRC LIKE SY-SUBRC.
50
51
IF P_CTU <> 'X'.
52
CALL FUNCTION 'BDC_INSERT'
53
EXPORTING TCODE = P_TCODE
54
TABLES DYNPROTAB = BDCDATA
55
EXCEPTIONS OTHERS = 1.
56
ELSE.
>>>>>
CALL TRANSACTION P_TCODE USING BDCDATA
58
MODE P_MODE
59
UPDATE CUPDATE
60
MESSAGES INTO P_MESSTAB.
61
ENDIF.
62
L_SUBRC = SY-SUBRC.
63
REFRESH BDCDATA.
64
SY-SUBRC = L_SUBRC.
65
ENDFORM.
66
67
68
Start new screen *
69
70
FORM BDC_DYNPRO USING PROGRAM DYNPRO.
71
CLEAR BDCDATA.
72
BDCDATA-PROGRAM = PROGRAM.
73
BDCDATA-DYNPRO = DYNPRO.
74
BDCDATA-DYNBEGIN = 'X'.
75
APPEND BDCDATA.
76
ENDFORM.
Active Calls/Events
No. Ty. Program Include Line
Name
7 FORM SAPLY_FGRP Y_ZMB1A_BDCREXCY 57
BDC_TRANSACTION
6 FUNCTION SAPLY_FGRP LY_FGRPU02 81
Y_POST_SCRAP_GI
5 FORM SAPLY_FGRP LY_FGRPU02 1
Y_POST_SCRAP_GI
4 FORM RSM13000 RSM13000 5513
VB_CALL_FUNC
3 FORM RSM13000 RSM13000 5219
VB_V1_EXEC
2 FORM RSM13000 RSM13000 3952
VB_V1_NORMAL
1 MODULE (PBO) RSM13000 RSM13000 3801
VBEXEC
Chosen variables
Maybe you are looking for
-
How to remove bullets and spacing for url links in the Related Links iview?
I tried to look for a property that I can edit the look-n-feel of the url links in the Related Link iView using "Theme Editor". All I need is to remove the bullets and increase some vertical spacing between the links. Currently, it looks like this: U
-
FTP Adapter where FTP server is SSH Tectia Server for IBM z/OS
We are purchasing "SSH Tectia Server for IBM z/OS" as the secure FTP server. 1. Has anyone used this with Oracle FTP Adapter to securely FTP files to the mainframe? 2. What is the best way to maintain the username and password in the oc4j-ra.xml of t
-
Hey guys. I couldn't really put this problem into a sentence to find out the answer so i thought i would ask: I need 2 images to be flush against each other but the two graphics do not have strait lines. Basically it is a sort of jig saw type of scen
-
How to Get rid of my balance so that I can change store?
.
-
Hello, I am bit confused here. This is the first time I am implementing SAP Fiori standard app in central hub deployment scenario. I am trying to implement SAP SRM apps (My Shopping Cart and Approve Shopping Cart).We are now in the phase of preparing