Item Assignment to View Error

Dear Experts,
We are using SRM5.0 with CCM2.0 and when I tried to assign items to view for procurement catalog's by selecting the category,receiving error message as "select atleast one row",please advice me on the same to resolve this error.
Best Regards,
Venkata Koppisetti.

Hi Venkata,
Once you navigate through the categories you will be presented with items within these categories on the right hand 'Items' frame, you need to select the items you wish to present in the view from here and once marked/selected choose the 'Assign' button which will assign those selected items to the view. It is not possible to assign a category to a view, if you want all items within a category assigned to the view choose the table menu selection 'Slect All' and assign, then all items in this open category will be assigned to the view.
Regards
Jason

Similar Messages

Error message in ebay HTTP Status 404 - /view item/web-inf/views/error.jsp

Ebay special item listed for me causes an error screen when I click on the item.
Error message as in the question above.
Description: The requested resource is not available.
Ebay Server

Problem was not solved; did as told 3 times. No change; cannot return to an earlier version of Firefox nor Adobe flash player. Reinstalled Firefox and Flash player. Problem still there. Very irritating. No problem with IE, thank heaven! Wife's HP laptop has also Vista but earlier Firefox release. Has no problem. Eventually, in desperation, I uninstalled Flash player. Problem vanished except Firefox which wants me to reinstall Flash player. I resist this and have no problem as I do not watch video stuff much. Vista is up to date and have clean system with Bullguard antivirus. So in a sense problem is not solved but side tracked!

Item Open Interface giving error for Org Assignment

We ran the MTL_SYSTEMS_ITEMS_INTERFACE & loaded all the items at master level.
We are having issues in setting at Org level. Cant figure out what the issue as only few records gets assigned & then garbage sets in for remaining records. An SR has been raised & the tech support representative was saying that UOM's are different at master & org levels. Never heard of this issue earlier. I have worked with UOM's different at Master/Org levels.
The UOM's are different at Master & Org Level and in some cases the UOM are different for different Orgs. Attribute Control for Primary/Sec UOM is at Org level. The UOM's belong to the same UOM Class. There are standard conversions defined for all these UOMs.
Any pointers for quick resolution ?

Pl do not post duplicates - Item Open Interface giving error for Org Assignment

Problem in assigning Webdynpro view to BPM task

hello all,
I have a webdynpro application using EJB Model. Now I am trying to embed this application into BPM. When I am assigning the view to a bpm task then it will show error that data type not supported like that.
In Component Controller's context and Interface's context I am using context node through model node binding and in the model node i am using some Java Native datatypes like java.util.Date/java.lang.Long etc that are not supported in BPM tasks i think.
How can I handle this prob. thks in advance. It will very useful for me if somebody have some example that uses the webdynpro views along with EJB Model in that.

Hi kapitsu,
not every data type is suppported by BPM.
May you have a look at
[Data Type Compatibility|https://help.sap.com/saphelp_nwce711/helpdata/en/63/9f9ca5bb234502bd7b02c91ac6040a/content.htm]
Or at
[SAP Message 1266539|https://websmp130.sap-ag.de/sap%28bD1kZSZjPTAwMQ==%29/bc/bsp/spn/sapnotes/index2.htm?numm=1266539]
There are also some examples where it works:
[CE 7.1 Samples|SAP NetWeaver Composition Environment Samples Center ]
[Modeling Your First Process with SAP NetWeaver Business Process Management|SAP NetWeaver Business Process Management Resource Center;
Maybe it helps.

Help - Item Assignment at Inventory Organization level from the Interface

Hi,
I have developed an Inventory Item upload Interface (MTL_SYSTEM_ITEMS_INTERFACE Table) for Oracle Apps R12.
It works fine in uploading the Items to Master Org which the template is created. But When I tried to upload at Inventory Organization level it returns an error says 'Template or Template ID is not assigned for the Organization'.
How can I assign/upload the Item at Inventory Organization Level? I have already tried the Organization Item Assignment Report, It works fine and assign the Items to relevant Organizations. But the parameters are Item Range which I cant use those parameters.
Please help me to Upload items at Inventory Organization level from the Interface.
Thanks

open any delivery.
1. select any delivery item number( double click).
2. go to text tabstrip of the item.
3. select the text type and double click on the blank space where we write some texts will give you new screen for writing text will give you text screen.
then in menu: goto->header will popup screen with details given below.
text name: delv+item num
Language: 'EN'
text ID: '0001'       " for first text type and so on.
Text Object: 'VBBK'
****CODE.
data: ist_text type table of tline,
      wa_text type tline.
CALL FUNCTION 'READ_TEXT'
EXPORTING
   CLIENT                        = SY-MANDT
    id                            = 'textid'
    language                      = sy-langu
    name                          = 'textname'   " its concatenation of Dlv no. and item number.
    object                        = 'VBBP'
tables
    lines                         = ist_text
EXCEPTIONS
   ID                            = 1
   LANGUAGE                      = 2
   NAME                          = 3
   NOT_FOUND                     = 4
   OBJECT                        = 5
   REFERENCE_CHECK               = 6
   WRONG_ACCESS_TO_ARCHIVE       = 7
   OTHERS                        = 8
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Reward points if helpful.
Regards
Ashok

Customer order item assignment to WBS

Currently the WBS entry field is not displayed on customer order item - assignment tab.
What do I have to do in customizing to change this and make the WBS element field displayed ?

Well, my earlier response was based on your following requirement,
> Currently the WBS entry field is not displayed on customer order item - assignment tab. What do I have to do in customizing to change this and make the WBS element field displayed ?
whereas, there was no mention of statistical WBS element.
Anyways, to link the sales order in SD with the Project System, assign one or more sales order items to a WBS element (billing element or account assignment element).
The usage of statistical WBS elements as additional account assignment in SD is not supported in the system.
The following three account assignment are available in SD from the point of view of costs controlling/revenue controlling:
      1. Sales order item assigned to profitability segment (CO-PA). This is typically used in serial business where the actual costs do not have to be considered separately for each sales order. When you post the billing, the costs of sales are calculated costing-based from the standard cost estimate and transferred to the profitability analysis together with the actual revenue.
      2. Sales order item with automatically created 'cost collector'. In this case, the sales order item is a normal account assignment object in CO. Actual costs and actual revenues are managed directly in the sales order item.
      3. Sales order item assigned to (nonstatistical) WBS element. In this case, the WBS element manages the actual costs and the actual revenues for the sales order item.
Combination of these procedures in a sales order item are not supported.
For more detail, refer SAP Note 43875 - Sales order + statistical WBS element
Thanks & Regards
JP

Dynamically assigning query/view to a table

Hi All,
i want to assign a view to a table dynamically in WAD as per certain condition, can any 1 tell me how to do this?
thanks in advance
Godhuli

Just a thought
Instead of assigning query dynamically is it possible that you will have tables with different queries as dataprovider and at run time you can show only the required table and other tables you can hide.
Unfortunately my WAD is not working so I am just giving a pseudo code.Please don't blame me for syntax errors.Please Paste this code between <\BODY> and
<\HTML>.
You can write a script like this
<script>
var obj;
var tablobj;
obj = findobject("option_1");
HideTables();
if (obj.value == 1)
   tablobj = findobject("TABLE_1");
   tablobj.style.display = "show";
if (obj.value == 2)
   tablobj = find_object("TABLE_2");
   tablobj.style.display = "show";
function findobject(objname)
var all = document.all;
for( var i=0;i<all.length;i++ ){
if (all<i>.name==objname)//we have found object
return all<i>;
return null;
function HideTables()
var all = document.getElementsByTagName("table");
for( var i=0;i<all.length;i++ )
all<i>.style.display = "hidden";
<\script>
Regs
Gopi.
Message was edited by: Gopi

Display only in Items assignement block

Hi experts.
I have a requirement where one of the columns of the "items" assignment block should be made display only.
I used the transaction bsp_wd_cmpwb to configure - but as this is a table view I don't have the option for display only (generally available for over view page. I am specifically looking for Product description in the items assignment block.
Can this be done by configuring. Do I need to code any thing. if yes please suggest how.
Thank you
Ram

Hello Ram,
Did you try to redefine method GET_I_xxx of your DESCRIPTION field already?
Check out if adding this line of code can do the trick:
rv_disabled = 'TRUE'.
Regards,
Nicolas Busson.

Item does not exist error when updating item

Hi,
I have a list called "Deal" and I have a ItemUpdated event to update the item permission based on a list field "Owner".
I find the code run well with site collection administrator account. If I use a regular user account to edit the item, it throws "Item does not exist" error after clicking save button. But the item is actually updated.
I run the code under debug mode and it does not throw any exception. But the page shows "Item doex not exist" error.
If I retract the solution, the item can be updated normally without any error.
My code and the error message:
public override void ItemUpdated(SPItemEventProperties properties)
if (properties.ListTitle.Equals("Deal"))
base.ItemUpdated(properties);
try
SPSecurity.RunWithElevatedPrivileges(delegate
using (SPSite elevatedSite = new SPSite(properties.SiteId))
using (SPWeb elevatedWeb = elevatedSite.OpenWeb())
SPList elevatedList = elevatedWeb.Lists[properties.ListId];
SPListItem elevatedListItem = elevatedList.Items.GetItemById(properties.ListItem.ID);
// Get Lead owner
SPFieldUserValue uValue = (SPFieldUserValue)elevatedListItem.Fields["Owner"].GetFieldValue(elevatedListItem["Owner"].ToString());
SPUser owner = uValue.User;
bool oldValue = elevatedWeb.AllowUnsafeUpdates;
elevatedWeb.AllowUnsafeUpdates = true;
elevatedListItem.ResetRoleInheritance();
// Break inheritance and clear permissions on list item
if (!properties.ListItem.HasUniqueRoleAssignments)
elevatedListItem.BreakRoleInheritance(false);
// Add permissions for current user
this.SetPermissionsForUser(elevatedWeb, elevatedListItem, owner, "LeadsOwnerPermission");
this.EventFiringEnabled = false;
elevatedListItem.SystemUpdate();
this.EventFiringEnabled = true;
elevatedWeb.AllowUnsafeUpdates = oldValue;
catch (Exception ex)
COMException (0x81020016): Item does not exist.
The page you selected contains an item that does not exist. It may have been deleted by another user.<nativehr>0x81020016</nativehr><nativestack></nativestack>]
Microsoft.SharePoint.Library.SPRequestInternalClass.GetListItemDataWithCallback2(IListItemSqlClient pSqlClient, String bstrUrl, String bstrListName, String bstrViewName, String bstrViewXml, SAFEARRAYFLAGS fSafeArrayFlags, ISP2DSafeArrayWriter pSACallback, ISPDataCallback pPagingCallback, ISPDataCallback pPagingPrevCallback, ISPDataCallback pFilterLinkCallback, ISPDataCallback pSchemaCallback, ISPDataCallback pRowCountCallback, Boolean& pbMaximalView) +0
Microsoft.SharePoint.Library.SPRequest.GetListItemDataWithCallback2(IListItemSqlClient pSqlClient, String bstrUrl, String bstrListName, String bstrViewName, String bstrViewXml, SAFEARRAYFLAGS fSafeArrayFlags, ISP2DSafeArrayWriter pSACallback, ISPDataCallback pPagingCallback, ISPDataCallback pPagingPrevCallback, ISPDataCallback pFilterLinkCallback, ISPDataCallback pSchemaCallback, ISPDataCallback pRowCountCallback, Boolean& pbMaximalView) +256
[SPException: Item does not exist.
The page you selected contains an item that does not exist. It may have been deleted by another user.]
Microsoft.SharePoint.WebPartPages.DataFormWebPart.InsertCallback(Int32 affectedRecords, Exception ex) +24356360
System.Web.UI.DataSourceView.Insert(IDictionary values, DataSourceViewOperationCallback callback) +4064980
Microsoft.SharePoint.WebPartPages.DataFormWebPart.FlatCommit() +378
Microsoft.SharePoint.WebPartPages.DataFormWebPart.HandleOnSave(Object sender, EventArgs e) +24
Microsoft.SharePoint.WebControls.SaveButton.OnBubbleEvent(Object source, EventArgs e) +727
System.Web.UI.Control.RaiseBubbleEvent(Object source, EventArgs args) +70
System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +29
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +2981

Can you try removing user permissions iteratively.
The sample code will look like this.
//get usernames
string tempFieldValue = listItem["Assigned To"].ToString();
string[] userNameArray = listItem["Assigned To"].ToString().Split(';');
//remove permissions first
web.AllowUnsafeUpdates = true;
listItem.BreakRoleInheritance(false);
SPRoleAssignmentCollection raCollection = listItem.RoleAssignments;
//remove exisiting permissions one by one
for (int a = raCollection.Count - 1; a >= 0; a--)
raCollection.Remove(a);
for (int i = 1; i < userNameArray.Length; i++)
tempFieldValue = userNameArray[i].Replace("#", "");
userName = web.AllUsers[tempFieldValue];
toAddress = userName.Email;
SPSecurity.RunWithElevatedPrivileges(delegate()
//EMAIL USER
bool result = SPUtility.SendEmail(web, appendHtmlTag, htmlEncode, toAddress, subject, message);
//PERMISSIONS
//grant permissions for specific list item
SPRoleDefinition roleDefintion = web.RoleDefinitions.GetByType(SPRoleType.Contributor);
SPRoleAssignment roleAssignment = new SPRoleAssignment(userName);
roleAssignment.RoleDefinitionBindings.Add(roleDefintion);
listItem.RoleAssignments.Add(roleAssignment);
listItem.Update();
i++;
jaik

Missing item assignment for "Minority interest in the balance sheet"

Dear Experts,
We unable to perform "Consolidation of investment" and "Validation of Consolidation data" due to our 2 newly created ECCS Accounts not properly assigned. Can any experts guide me how to mapped it? Your fast action is very much appreciated.
Regards/Lisa

Dear Dan Sullivan,
I have created 2 news ECCS Accounts named as SHARE CAPITAL & SHARE PREMIUM. And i do not know how to eliminate these 2 new ECCS accounts with INVESTMENT IN SUBSIDIARY COMPANIES.
When we performing CONSOLIDATION OF INVESTMENT, the error message showed "Missing Item assignment for Minority Interest in the Balance Sheet" and "No Items are assigned to the items (Newly created ECCS Account)".
Further when we run VALIDATION OF TOTALS DATA, the error message showed "Total Assets is not equal to Total Liabilities + Equity" in Step 002.

Items assigned to an engineer

Hi
Does anyone know if its possible to set up a view so that each engineer can see all items assigned to them in one folder...i.e. Incidents, Change, any Problem records etc.
I've got a queue for each engineer within the incident folder but this only allows them to see incidents and Ideally i'd like them to be able to see all catagories within one folder rather then having 3 or 4 folders per engineer in the different areas of
the application.
Thanks

1) Cireson has a solution for exactly that:
http://cireson.com/apps/my-work-items/
2) You can also create a "Work Item" view, but you'll be making some big compromises. For example, you won't be able to limit the work items based on status (so you couldn't view all open incidents/service requests/etc). Furthermore, your criteria would
have to limit the work items to those with IDs that start with "SR", "IR", "CR", etc to avoid listing activities in the view.
These compromises are generally unacceptable to most folks. Any reasonable solution requires a good bit of coding effort developing a custom view with Visual Studio.
3) There are hacky ways of doing this by using a workflow to encode data into an unused work item property, like "ContactMethod", but it's not a very elegant approach and would probably require other annoying compromises..and you would probably
still need to develop WPF binding converters to get the result you want.

WBS Assignment for Asset Error

Dear Experts,
In CJ03 transaction, checking the WBS data i found error in viewing of assigned asset.
the Error Message showing "Data for asset view 0 is missing" in the tab of Asset under construction. i didnt understand and i checked the asset and found the asset is ok. kindly provide me a solution for this message.
Thanks in advance,
Raghav
Edited by: Raghav K on Sep 12, 2008 8:34 AM

Hi Satish,
I am using the ECC6.0, so is this valid for my version?
Thanks for the fastest reply also.
Thanks and Regards,
Raghav

How to view errors if bulk collect has thrown errors

Hi,
I have few questions.
1.How to view error whether bulk collect is successful or not
2.What is identified & unidentified relationships in ERWIN
3.How to see the errors whether the sql loder is successful or not
and how to open the log file.Is there any specific command in UNIX
which tells loader is successful or thrown error
4.When executing the pl/sql procedure from UNIX.how to check for errors.
Please provide the answers for this
Thanks

Use SAVE EXCEPTIONS clause in your FORALL loop.
Is this for homework/test?

Crystal Report Windows Forms Viewer Error in 1 Workstation after upgrade of PL

Hi all,
We just upgraded SAP from 8.82 PL02 to 8.82 PL15.
Afterwards, in just 1 workstation, Crystal Reports layouts have Crystal Report Windows Forms Viewer error I attach.
Before the upgrade this error did not happen.
No permissions or authorizations were changed in the workstation.
The Crystal Reports layouts remain working fine in server and in the other workstations.
In the workstation following are installed:
- Operating System Windows 7;
- Microsoft .NET Framework 4.5;
- SAP Crystal Reports runtime engine for. NET Framework;
- Crystal Report 2008 Runtime SP6;
- Microsoft SQL Server 2008 R2 Native Client.
All, but the operating system, are equal to the other workstations.
User has edit access to SAP folders, temp and access to the attach path.
We already uninstalled SAP client and client agent and re-installed it but with no avail.
Can anyone help me?
Thanks in advance.
Best regards,
Pedro Mariano

Hi San Xu,
Thank you for your input.
However I'm facing problem with each software is suitable.
I installed SAP Crystal Reports for SAP Business One (CR 2011 V14.0.4.738), but with no avail.
Thanks in advance.
Best regards,
Pedro Mariano

Task 0085 for parallel SID assignment terminated with errors

Hi,
While activating the ODS object we are getting the following error
Task 0085 for parallel SID assignment terminated with errors
Can anyone help me on this issue.
Thanks
Sheela Datla

Hi Sheela,
Does the problem happen with activating the ODS object (definition) itself or with activating the data in the
ODS? I think that there must be other errors apart from Task 0085. At the time of the error you should check in
sm21 and st22 for additional error messages and dumps. If the problem is with the activation of data in the ODS
you should also check sm37 for the job that is created for the ODS activation , you may find more detailed
information in the job log. You should also check the activation step in the 'Details' TAB in the monitor for
the load there may also be more detailed information here.
In transaction rscusta2 (ODS customizing) you should try the following setting for the activation:
No. of Par. Proc.    3
Min. No. Data Recs. 10000
Wait Time in Sec.      600
Before changing the values you have in RSCUSTA2 please take note of the values you have already in
case you want to change them back.
Best Regards,
Des.

Item Assignment to View Error

Similar Messages

Maybe you are looking for