Item can not be invoiced according to the billing plan
Hi.
I change a sales order in t-code va02 and select the item 10 and click the menu "Goto->Item->Billing plan".The sap pop up a message "Item 000010 can not be invoiced according to the billing plan".And there is no detail help to this message.I don't know why sap pop up such a message and how to resolve this problem.So I need you give me useful reference to resolve it.
Thank you.
Regards
Yoda
Hi Yoda
Check your Sales order. The Item category for the Item should be either TAO or WVN for Milestone and Periodic Billing Plan respectively.
The Billing plan type is proposed from the Item category.
Similar Messages
-
Work item can not be read when opening the task on the portal side
Hi Experts,
when we open a UWL workitem on the PROD portal, the message Workitem xxxxxxx can not be read. If we try it in the back-end, then it works fine. How to solve this? I checked and compare the .xml files on the PROD portal with the WAS portal and everything is the same.
thanks in advance,
J. de VoijsDear Robert,
Please check whether the user to whom you are sending the workitem has proper authorisation. Forward the workitem to another user from backend & try opening it from his UWL. If it opens there perfectly then its an authorisation issue.
B -
What does the question mark mean in the states bar of ALL MY FILES window and how do I rectify the situation? When I click the question mark I get the message "Item can not be found"
Please post a screenshot that shows what you mean. Be careful not to include any private information.
Start a reply to this message. Drag the image file into the editing window to upload it. You can also include text in the reply. -
Once in a while my full-crawl fails and stops working properly. The crawllogs show this error for all items crawled.
The item could not be indexed successfully because the item failed in the indexing subsystem. ( The item could not be indexed successfully because the item failed in the indexing subsystem.; Caught exception when preparing generation GID[7570]: (Previous generation
(last=GID[7569], curr=GID[7570]) is still active. Cannot open GID[7570]); Aborting insert of item in Link Database because it was not inserted to the Search Index.; ; SearchID = F201681E-AF1B-45D2-BFFD-6A2582D10C19 )
The full crawls starts out ok, after a while (1.5 hours into the process, 50% of all the data) suddenly no more items can be added to the index.
The index seems to be stuck. The index files on disk are no longer updated (Located in D:\Microsoft
Office Servers\15.0\Data\Office Server\Applications\Search\Nodes\BAADC4\IndexComponent3\storage\data\SP4d91e6081ac3.3.I.0.0\ms\%default) The Index and Admin component start to report these error in the ULS logs:
NodeRunnerIndex: Journal[SP4d91e6081ac3]:
Rolling back GID[7570] to GID[7569] prepGen=GID[7569]
NodeRunnerIndex: Remote
service invocation: method=RollbackGeneration() Service = { Implementation type=Microsoft.Ceres.SearchCore.ContentTargets.IndexRouter.IndexRouter Component: SP4d91e6081ac3I.0.0.IndexRouter Exposer Name: GenerationContentTarget} terminated
with exception: System.InvalidOperationException: Illegal state transition in SP4d91e6081ac3I.0.0.FastServer.FSIndex: Rollback -> Rollback
NodeRummerAdmin: RetryableInvocation[SP4d91e6081ac3]:
Exception invoking index cell I.0.0. Retrying in 16 seconds: System.InvalidOperationException: Illegal state transition in SP4d91e6081ac3I.0.0.FastServer.FSIndex: Rollback -> Rollback
Looks to me the index has troubles updating/merging 'generations'. But the exact working of the indexer is not documented (as far is I know). Let alone how to fix this.
Other (maybe related) observations
Just before the errors start the NodeRunnerIndex starts a 'checkpoint': Journal[SP4d91e6081ac3]:
Starting checkpoint because forceCheckpoint is true.which ends a few moments later with Journal[SP4d91e6081ac3]:
All journal users have completed checkpoint Checkpoint[7560-7569].
Also just before the errors start to appear a TimerJob starts: Name=Timer
Job job-application-server-admin-service. This timerjobs does some strange things to the search topology: Synchronizing
Search Topology for application 'Search Service Application' with active topology [...] and Activating
components. Previous topology: --- New Topology: TopologyId: [...] followed by Starting
to execute Index RedistributeData method.
And right after these two evente the errors start to occur. (each row is a ULS log enrty)
INFO : fsplugin: IndexComponent3-bd83a8aa-923b-4526-97e8-47eac0986ff7-SP4d91e6081ac3.I.0.0 (4236): Prepare generation: 324 documents
IndexRouter[SP4d91e6081ac3]: Caught exception when preparing generation GID[7570]: (External component has thrown an exception.): System.Runtime.InteropServices.SEHException (0x80004005): External component has thrown an exception.
GenerationDispatcher[SP4d91e6081ac3]: Failed to prepare GID[7570] in 453 ms, failed on cells: [I.0.0], stale services: []
Journal[SP4d91e6081ac3]: Rolling back GID[7570] to GID[7569] prepGen=GID[7569]
Remote service invocation: method=RollbackGeneration() Service = { Implementation type=Microsoft.Ceres.SearchCore.ContentTargets.IndexRouter.IndexRouter Component: SP4d91e6081ac3I.0.0.IndexRouter Exposer Name: GenerationContentTarget} terminated with exception: System.Runtime.InteropServices.SEHException (0x80004005): External component has thrown an exception.
RetryableInvocation[SP4d91e6081ac3]: Exception invoking index cell I.0.0. Retrying in 2 seconds: System.Runtime.InteropServices.SEHException (0x80004005): External component has thrown an exception.
Journal[SP4d91e6081ac3]: Rolling back GID[7570] to GID[7569] prepGen=GID[7569]
The Question What is causing this? And how to prevent it? It happend twice in two weeks
nows. Out of the blue, no config change has been made, all disks have enough space.
Known Fix This resolves the problem, but doesn's address the root-cause of the problem!
Stop all crawls.
Wait a few minutes to let the crawl come to a complete stop.
Reset the index (clearing all!)
Start a full-crawl. In the meantime no search is available to the end user (boohoo!)Hi,
I searched for the similar error log, the issue is finally solved by adding more drive space even though they though there is plenty space already.
https://social.technet.microsoft.com/Forums/office/en-US/d06c9b2c-0bc1-44c6-b83a-2dc0b70936c4/the-item-could-not-be-indexed-successfully-because-the-item-failed-in-the-indexing-subsystem?forum=sharepointsearch
http://community.spiceworks.com/topic/480369-the-item-could-not-be-indexed-successfully
From your decription, the issue seems to occur to your full crawl. There is one point in best practise for crawling:
Run full crawls only when it is necessary, the reasons to do a full crawl are as below:
https://technet.microsoft.com/en-us/library/jj219577.aspx#Plan_full_crawl
https://technet.microsoft.com/en-us/library/dn535606.aspx
Regards,
Rebecca Tu
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected] -
Sometimes when I play songs in Itunes by double clicking on them, Itunes will place the song as the first one on the album. It will chnage the order of the songs on the album, and I can not switch them back to the correct order. This onloy seems to happen when I double-click on the song to play it in itunes. If I just hit play, this doesnt happen. As a result, I have several albums now in which the songs are in the wrong order. Its very frustrating, as this error then transfers over to my ipod every time I sync it. When I choose the info. for the songs, it has them correctly listed (i.e., it lists the songs as being #1 of 19 on the CD, for example). But then the song will have placed by Itunes as #5 of 19 for whatever reason. Itunes does not do this every time, but does it with enough frequency to be maddening. Any thoughts?
The problem of tracks becoming de-linked between iTunes and the music files in your iTunes music folder happens for different reasons - this seems to come up fairly commonly in this forum.
The solution can be to locate each song in the iTunes library, as you mentioned - or, but wait, before I get to that...
trouble finding the original track in your iTunes music folder? maybe look for it under compilations, or if not using the 'group compilations preference' then look in the folder under the songs artist name, but what song artist name iTunes uses depends on what you have in the metedata tag spot for album artist or song artist. Any varyation in artist name spelling, in the menu item 'get info' metadata for any selected individual track will cause iTunes to create that as a separate artist folder in the library, even names like 'various' or any difference at all (even the word 'the' can change where in your iTunes music folder a track gets placed by iTunes). You can try to use the finder function of find file (finder munu item outside of iTunes) to locate hard to find items.
Back to how to re-link any de-linked tracks .
There may be scripts that can help re-link de-linked music files - or, at least provide you a list of such files, Scripts are easy to install and use...
at Dougs Scripts, there is one called iTunes Track CPR that might work
http://dougscripts.com/itunes/scripts/ss.php?sp=itunestrackcpr
or, if you just want a list of de-linked tracks, go to
http://dougscripts.com/itunes/
and find the script called List MIA's, this will create a text file listing all de-linked tracks
if you review the thread at
https://discussions.apple.com/thread/3633708
also the thread at
https://discussions.apple.com/message/17513078#17513078
you may find more insight into dealing with this kind of issue there, although some of that thread may not apply to your case, aspects of it might help.
Good luck. -
I recently got a new PC and had all of my files moved to it. However, when I sync my iPad and IPod nano I get a message that states that 41 of my items can not be copied to the PC because it is not authorized on my account even though it is. I have tried de-authorizing it and re-authorizing it but they still will not copy. Any thoughts on how I can get them to copy?
"Note: If you no longer have access to a computer that is using one of your authorizations, you can deauthorize all of the computers associated with your account by following the steps at the bottom of About iTunes Store authorization and deauthorization".
Authorize the new computer. Launch iTunes. Go to the menu bar click Store / Authorize This Computer.
Sync your iPod. -
I can not install app's from the app store on my phone,and when i try, i get a message tells me (cannot connect to itunes store) that happened after i updated it to "IOS6" . it's a "IPhone4 S"
Remember, any purchased item from the itunes store is forever associated with the Apple ID used to buy it. So when you get prompted for an ID/password and it doesn't accept it, then you are using the wrong ID.
Go to Settings>iTunes and App Stores, be sure it's logged into the ID you have set on the iphone (since that one seems to be connecting with the right ID). If you've done this, then you might wait a bit to see if the "cannot connect to .. store" message has to do with internet connections. -
how can i use my account without the billing info, as i do not have a credit card. and my shipping and billing info is under US. i'm in singapore. how do i change this?
If you are just visiting Singapore, then leave the account as it is. If you have moved there, then view your account using the iTunes app on a Mac or PC and change the country/region to your current location and address. If you do not have a bank card, you can fund your account using iTunes gift cards if available in Singapore.
-
The BIG WHITE MOSTLY BLANK , MOZILLA START PAGE was blocking my use of PRINT PREVIEW, from the orange "Firefox" in the upper left corner.
I was told i was using an out of date version of Firefox.
But no "click here to update".
So i downloaded the new edition of Firefox.
And still, i can not see PRINT PREVIEW, because the large white screen of the MOZILLA START PAGE is blocking it.
I have selected a background wallpaper, so would rather not see ANY of the BIG WHITE START PAGE, at all !!
HEEEELP,,,,,,Hi,
Can you please post a [https://en.wikipedia.org/wiki/Screenshot screenshot] of the start page when it is blocking the print preview. Please note that you may have to change to the tab of the site to be printed to see the print preview of the page. If the problem persists, please also check in [https://support.mozilla.com/en-US/kb/Safe%20Mode Safe Mode.]
[http://kb.mozillazine.org/Problematic_extensions Problematic Extensions]
[https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes Troubleshooting Extensions and Themes]
[http://support.mozilla.com/en-US/kb/Uninstalling+add-ons Uninstalling Add-ons]
[http://kb.mozillazine.org/Uninstalling_toolbars Uninstalling Toolbars] -
Can not see my Airport in the list of Wifi networks and is blinking organge all the time
Can not see my airport on the list of WiFi networks and is blinking orange all the time. Tried to reset several times.
Do you have a Mac or idevice for setting up the Express? It does require a later utility than is available for windows.
You might be able to setup with the v5 utility in windows but there is no guarantee.
You should use a simple name both for the base and the wireless. eg AEXgen2 base name and AEXwifi for wireless name.. that is if you get access. -
The "always allow" button is grayed out in settings regarding cookies, and I can not find where to change the setting. (Restrictions are not on.) Do you know where I go to change the setting to allow me to "always allow" cookies?
Hi lisaarnett111,
If you are having issues turning on Always Allow for cookies in Safari on your iPad, you may want to check to make sure that you don't have Private Browsing enabled, as noted in the following article:
Turn Private Browsing on or off on your iPhone, iPad, or iPod touch - Apple Support
Regards,
- Brenden -
How can I use iCloud-keychain if i can not find my country in the country code list?
How can I use iCloud-keychain if i can not find my country in the country code list?
Welcome to the Apple Community.
If your country code does not appear in the list…
Go to System Preferences > iCloud > Keychain and enter your Apple ID password (Settings > iCloud > Keychain, from a mobile device)
Select the ‘Create Different Code’ option. (Mobile devices only)
Select the advanced option and choose whether to create a random code or no code, selecting the later allows syncing across devices but not with Apple’s servers. -
Can not delete Twitter mentions from the Hub
Can not delete Twitter mentions from the Hub. When I delete, they reappear in a few minutes.
I had the same problem,so i just deleted Twitter altogethet. Like was said before it must be bug among many they seem to have,including password compromises
-
Can not add a picture to the JFrame from an ActionListener class
As topic says, I can not add a picture to the JFrame from an ActionListener class which is a class inside the JFrame class.
I have a Map.java class where I load an image with ImageIcon chosen with JFileChooser.
I my window class (main class), I have following:
class OpenImage_Listener implements ActionListener
public void actionPerformed(ActionEvent e)
int ans = open.showOpenDialog(MainProgram.this); // "open" is the JFileChooser reference
if(ans == open.APPROVE_OPTION)
File file = open.getSelectedFile();
MainProgram.this.add(new Map(file.getName()), BorderLayout.CENTER); // this line does not work - it does not add the choosen picture on the window,
//but if I add the picture outside this listener class and inside the MainProgram constructor, the picture apperas, but then I cannot use the JFileChooser.
showMessageDialog(MainProgram.this, fil.getName() ,"It works", INFORMATION_MESSAGE); // this popup works, and thereby the ActionListener also works.
}So why can�t I add a picture to the window from the above listener class?The SSCCE:
Ok, I think I solved it with the picture, but now I cannot add new components after adding the picture.
Look at the comment in the actionlistener class:
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import java.io.*;
public class Test extends JFrame{
JButton b = new JButton("Open");
JFileChooser jfc = new JFileChooser(System.getProperty("user.dir"));
Picture pane;
Test(){
super("Main Program");
setLayout(new BorderLayout());
JPanel north = new JPanel();
add(north, BorderLayout.NORTH);
north.add(b);
b.addActionListener(new Listener());
setVisible(true);
setSize(500,500);
pane = new Picture("");
add(pane, BorderLayout.CENTER);
class Listener implements ActionListener {
public void actionPerformed(ActionEvent e){
int ans = jfc.showOpenDialog(Test.this);
if(ans == jfc.APPROVE_OPTION)
File file = jfc.getSelectedFile();
Test.this.add(new Picture(file.getName()), BorderLayout.CENTER);
pane.add(new JButton("NEW BUTTON")); // Why does this button not appear on the window???
pane.repaint();
pane.revalidate();
public static void main(String[] args)
Test t = new Test();
class Picture extends JPanel
Image pic;
String filename;
Picture(String filename)
setLayout(null);
this.filename = filename;
pic = Toolkit.getDefaultToolkit().getImage(filename);
protected void paintComponent(Graphics g)
super.paintComponent(g);
g.drawImage(pic,0,0,getWidth(),getHeight(),this);
revalidate();
} -
Can someone please help me get my iPhone to sync to your computer?
I can not sync my iPhone to the computer. I keep getting up an error message that synchronization does not want to start. I have uninstalled iTunes and then reinstall it. But the same warning box will appear. How can I get my phone in sync again?Hello lenmin,
Thanks for using Apple Support Communities.
To help resolve this issue where you're repeatedly prompted to authorize with your Apple ID in iTunes when syncing, please follow the directions in the article below.
iTunes: Missing folder or incorrect permissions may prevent authorization - Apple Support
Have a great weekend,
Alex H.
Maybe you are looking for
-
In my iPad mini if I use earphones I can hear from only one side
In my iPad mini if I use earphones I can hear from only one side but the earphones work fine with other devices
-
Tittle says all! I need help! The iPhone 5 will not do anything when pluged in. Please help!
-
Using diagnostic mode on 27 inch iMac
I was trying to get my 27 inch core i7 iMac to boot into diagnostic mode this morning by holding down the 'D' key during bootup. It just wouldn't work and kept booting up normally. Then it occurred to me that maybe this is due to the fact that this i
-
Versioning Error with SQL Server JDBC Driver
Hi, I wrote a simple class for inserting rows into a database. The database is SQL Server 2000, and I am using weblogic's mssqlserver4 driver. The class works fine, but when I try to export the class as a remote object (using Sun's RMI implementation
-
is it possible in a remote access VPN to give the same IP to a client as they connect and pool the address from th IP pool? I was thinking like a DHCP server where you can tie a mac to an address, is it possible with a pool?