Item Cat NLN appears not relevant for picking even it is relevant in 0VLP

Dear Expert,
We have an issue in on the behavior of the item category we assigned to the replenishment delivery. The transaction starts from an STO-PO and create a replenishment delivery on the background via VL10B. The replenishment delivery was successfully created. The weird thing is, item cat NLN is relevant for picking. I checked the item cat assigned to the replenishment delivery and it shows NLN but it appears as not relevant for picking as picked quantity column is uneditable. Seems weird and this is my first time to encounter such issue. I tried browsing the net and had no luck to find same scenario. Can somebody please tell me what could be the possible cause of this issue? Thank you in advance!
Kind regards,
Mark

Mark,
Is the inventory warehouse managed or inventory managed? Usually, if you are in an inventory managed scenario, the system lets you directly input a picked quantity directly on the delivery. If you are in a warehouse managed scenario, you have to create a transfer order to do picking. You can check this by looking at field "OverallWMStatus" on the "picking" tab of the delivery. If the status says "WM Transfer Order required" you are in a WM managed scenario and have to carry out picking via a transfer order.
More information here.
Otherwise, I am not sure what the issue is!
Krishna

Similar Messages

Item category RENN is not defined for this item

Hey SD experts,
I've created a sales order with free of charge and standard items.
Now, I'm trying to create a return order with reference to this sales order.
I got this error message: Item category RENN is not defined for this item.
I've checked in VOV4 : the combination Sales document type + Itemcategory group =>Itemcategory seems to be correct.
Why am I getting this error message then ?
Regards,
Bahia.

Dear Bahia,
Check item level copy control settings between Sales order free of charge and Return sales order i.e copy control settings between free of charge order item category and returns order itemcategory.
Once again check item category determination through VOV4 transaction for the combination of
Your returns order document type+Itemcategory group-->RENN.
I hope this will help you,
Regards,
Murali.

Message no. V1321 - Item category ALES is not defined for this item

Hi,
I am trying to use ALES - Item Category for creation of the Sales Order. But i am getting this eerror message as Item category ALES is not defined for this item. Please let me know the config changes that i need to do to use this Item Category.
Thanks in Advance !!

To maintain the item category for a sales order type first you have to assign the item category in SPRO.
SPRO>Sales & Distribution>Sales>Sales Documents>Sales Document Item>Assign item categories.
In the screen Change view Item category assignement:overview screen
select your sales document type + ItemcategorygroupUsageHigherLevel Item category
Then you have to maintain Default item category and Manual item category.
Default item category will be proposed by the system when you enter a material in sales order. You can change the item category to any one of the manual item category maintained above.
For e.g.: You are creating a thrid party sales order. Default item category is TAN, if manual item category is maintained as TAS for this combination of sales document type + ItemcategorygroupUsageHigherLevel Item category and then system will allow you to change item category to TAS. If this is not maintained then system will give you an error as"Item category TAS is not defined for this item".
Again depending the item category further acitivites will be carried in SAP, like in third party item (TAS) PR screen will be displayed.
Thanks,
Sarvesh Desai
Edited by: Sarvesh DeSai on Jan 11, 2012 7:08 AM

'Item category SUBC is not defined for this item'

Hi,
When i tried to create an SO with item category SUBC, the system pop-up this error msg: 'Item cateogry SUBC is not defined for this item'
Please let me know what should i do? Thank you.
I've maintained the item category assignment with same item category group maintained in material master data..But it still not work...

Dear Laa,
This is due to not done the itemcategory definition and determination.So
First you define the itemcategory SUBC through VOV7 transaction (By copying standard TAN)
Then do the itemcategory determination through VOV4 transaction for this combination
Sales document type+Itemcategory group--->Itemcategory
Itemcategory group is different from itemcategory.
Itemcategory group maintained in the Material master data
The item categroy will get determine in the sales order based on Sales document type+Itemcategory group
I hope this will help you,
Regards,
Murali.

Item category IRIN is not defined for this material

Hi,
When creating Sales Order, I assign a service material with Material Type DIEN , System gives me error as
"Item category IRIN is not defined for this item."
I want to know where and how is the link between Item Category and Material is maintained
Thanks in advance.
Regards,
Nitin

hi
i am not a expert , based on my knowledge system will determine the item category for line item , based on vov4 , here you will give the
sales document typeitem category groupusage+higher level item= default item category
or + leis + sein + enter over item= irin
this is for determination ,
in the material master you will check the item category group , sale view tab 1, 2, and also basic data.
based on this will take , line item , item category . so sales view and basic data view item category group are same , other wise system sows this is error message ,
please check this
regards
sankar

Error message: The item category 'ZTPS' is not permitted for product '134'

Hi experts,
When I try to create a sales order in CRM, I find the error: "The item category 'ZTPS' is not permitted for product '134'".
how can I solve this problem?
thank you for helping me,
Marco

hi,
I tried to perform the "define item category determination" activity, but the problem is that the possible entries for "Item category groups" and "Item usage" are different in the two systems:
for example in R/3 I find some entries with Item Category group = LEIH (returnable packaging),
when i try to insert this Item category group in CRM i press f4 to see possible entries but Ican't find the value LEIH.
how is it possible?
THANK YOU!
m

No exact match was found. Click the item(s) that did not resolve for more options. You can also use Select button to choose External Data.

HI,
I have SharePoint Online 2013 environment, i have created a external content type from wcf service. I want to use this as External Data column in document library. When i look for values in content type it populates and when i click any values and adds and
then click saves it shows the below error
No exact match was found. Click the item(s) that
did not resolve for more options. You can also use Select button to choose External Data
__fkc000950056003700kc000950056003700kc000e400f2001400kc000950056003700k830035004700160027004700d20057000700020064009600870056004600:
No Matching Items
Please help on this.
varinder

I don't understand the question exactly, could you restate it. Sorry mate, I might just be braindead.
But, as far as the issue, it is by design. the column is a lookup columns which essentially ties to the external data. if that data is removed, the column on your simple list becomes invalid and any edits of the simple list item will require
it to be changed.
are you wanting to make the ECT read only? that's simple enough. you can pop open SPD and edit the ECT, then remove the C/E/D operations (create/update/delete). That will not, however make it read-only in any other systems that access that
external data, as I assume its not just SP or else it wouldn't be external
Christopher Webb | MCM: SharePoint 2010 | MCSM: SharePoint Charter | MCT | http://christophermichaelwebb.com

Not relavent for Picking

Hi,
1) After Sales order When I am trying to create delivery its automatically showing
ITEM NOT RELEVENT FOR PICKING.
2) Its not taking Quantity,
But item isrelevant for picking,
Plz can you suggest me
thanks

Tiru,
Check the storage location under which you found the Stock and see whether the delivery is pointing to the same storage location or not..
If possible try to add the stock into the storage location of the plant that the delivery is pointing to..
I hope this should resolve your issue..
Regards,
Ajai
Don't forget to reward points if helpful.

You can creat any open item , you are remember not selecting for the open i

you can creat for any openitem, you are not selecting for the open item in FS00,, your already posting for the entries at the end of the month, you can select for openitem is it possible

Hi,
No.
Aravind Boddupalli

Item Category Grayed Out (Not Available for Input)

Hi Experts,
I want to know SAPs logic for graying out it. cat. field (PSTYV) when entering an Order. Item category cannot be changed while creating an order once its determined. How & why does SAP grays out it. cat. field and under which circumstances.
My case: I have a configurable item and based on this item subsequent item and its it. cat. is determined, once SAP determines second item it is graying out it. cat fields on both items. Though in configuration I have manual it. cat. maintained for both items along with dependancies. Any info on this matter will be greatly appreciated.
Thanks

Hi Ron,
Please refer to note 208245 as it has the answer of what you are looking for & possible workaround solution to meet your business requirement. Otherwise, please do not hesitate to update this forum.
Thank you.
Best regards,
Huey Chin

Item Category TAB is not looking for Special Stock.

Hello,
We have an issue while using item category TAB. For sales orders having item category TAB is allowing to create the Delivery note even though there is no stock received (GOODS RECEIPT) and assigned against this sales order stock.
Ideally the system should not allow to create the Delivery note. However it is allowing to create the Delivery note.
Checked the correspoding Schedule line that was determined : CB.
CB in VOV6 the correct settins were made as below.
The checks for
Sched.line cat.        CB    Indiv.Purchase Order
Movement Type         601   GD goods issue:delvy
Order Type                NB    Purchase requisition
Item Category             0     Standard
Acct Assgt Cat.         M     Ind. cust. w/o KD-CO
Incompl.proced.       31    Sched.Line w/PurReq.
Here we have the purchase requistion number on the schedule line tab, and in VBAP could see the it as a special stock item with the indicator E.
Ideally the flow is ONLY when the GOODS RECEIPT has done against this sales order stock, then the system should allow to create the deilvery.
Checked the copy control settings in VTLA and for TAB the Data transfer routine is 101.
Please help to understand why the system allows to create delivery when there is no GR made against this.
Thanks in advance.
Ram.

Hi Navaneeth,
Thanks for your response.
What i need is the SYSTEM SHOULD NOT allow me to create the Delivery. In this case it is allowing me to create the Delivery.
VOV7-TAB-> Special stock indicator is set as 'E'.
Inspite of it is set as E the system is allowing and ONLY at the time of PGI it is looking for special stock and pops up with the error message:
Sales order stock 6941 000010 does not exist
Message no. M7184
I expect the system should not allow to create the delivery at first chance.
Please help if it requires any other settings?
Best Regards,
Ram

Language Translation is not working for Pick slip Report (XML)

Hi All,
I have to translate the Oracle Pick slip report(XML) in other language. So I export and upload translation file for different language but still it is taking default english template. It should refer the translation file but it.s not working. Could you please suggest me if I am missing something?
Thnaks,
Joohi

Hi,
Looking for some help on this.
Thanks in advance!
Venkat

Order not ready for pick up second time

yesterday i bought a macbook for store pick up because i need it for travel and work. 3 hours went by and i never got the prduct released because the bridge decided to sit on it even though customer service said all was clear. i had to cancel order. today i gave best buy a second chance and its been 3 hours and i still have been heald up again. this is really making me never want to buy from best buy again nor recomend it.

Hi there Ebiasaf1983,
When making a purchase for travel and work, it can be a bit nerve racking to ensure you get it in time, especially if you are leaving soon for your travels! Generally speaking, our Store Pickup option is the perfect option in such a situation as you can place the order and have it ready for you when you get to the store.
I'm sorry to hear that your MacBook order may have been taking longer than you anticipated to process so that our store may fulfill it. It is discouraging to hear that this led you to cancel your order, and that you encountered a similar experience when you decided to try replacing the order. Using the email address you registered with the forum, I was able to see that you were able to pickup your order last night. If you should need any further assistance, please let us know!
Regards,

Fallback for Spengo not working for Firefox even though it works for IE

Hi,
I am using firefox, 3.6.8. I am trying to connect to an AppServer which uses SPNEGO as an external user. I have a fallback set up so that if it is an external user and SPNEGO fails, the AppServer will revert to Applicate Security which is simple BASIC authentication.
The fallback works ok for IE but not for Firefox. If I try to access the site, firefox just tells me:
SPNEGO Authentication not supported on this client and the fallback never happens.
== This happened ==
Every time Firefox opened
== When I first tried it

Did you try any of this:
https://encrypted.google.com/search?hl=en&lr=&tbs=qdr%3Ay&q=%22firefox+SPNEGO%22&btnG=Search
Also, update your Java to the current version and clean out the old Java Console Extensions. See:
http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox
http://kb.mozillazine.org/Java#Multiple_Java_Console_extensions

Set item categaries of sales order is not relevant for picking

dear friends:
when i created the outbound delivery and must maintain the picking quantity of materails.i change the configration of system so that not nessesary maintain the picking quantity. set item categaries of sales order is not relevant for picking via t_code:vlop,what it effect .help me analyze it .
best regards.

Hello,
In TA :OVLP set/reset the indicator according to your requirement.
In the case of outbound deliveries, only the delivery items that are relevant for picking are transferred to the Warehouse Management (WM) component. Certain items such as text items or service items (consulting activities) are not relevant for picking.(in those cases uncheck the box)
In the case of inbound deliveries, this indicator controls whether the item is relevant for putaway.
This indicator must be set in order for the item to be included in a Warehouse Management transfer order and then put away.
Regards,
Nisha
@award pts if helpful.

Item Cat NLN appears not relevant for picking even it is relevant in 0VLP

Similar Messages

Maybe you are looking for