Item category IRIN is not defined for this material
Hi,
When creating Sales Order, I assign a service material with Material Type DIEN , System gives me error as
"Item category IRIN is not defined for this item."
I want to know where and how is the link between Item Category and Material is maintained
Thanks in advance.
Regards,
Nitin
hi
i am not a expert , based on my knowledge system will determine the item category for line item , based on vov4 , here you will give the
sales document typeitem category groupusage+higher level item= default item category
or + leis + sein + enter over item= irin
this is for determination ,
in the material master you will check the item category group , sale view tab 1, 2, and also basic data.
based on this will take , line item , item category . so sales view and basic data view item category group are same , other wise system sows this is error message ,
please check this
regards
sankar
Similar Messages
-
Item category RENN is not defined for this item
Hey SD experts,
I've created a sales order with free of charge and standard items.
Now, I'm trying to create a return order with reference to this sales order.
I got this error message: Item category RENN is not defined for this item.
I've checked in VOV4 : the combination Sales document type + Itemcategory group =>Itemcategory seems to be correct.
Why am I getting this error message then ?
Regards,
Bahia.Dear Bahia,
Check item level copy control settings between Sales order free of charge and Return sales order i.e copy control settings between free of charge order item category and returns order itemcategory.
Once again check item category determination through VOV4 transaction for the combination of
Your returns order document type+Itemcategory group-->RENN.
I hope this will help you,
Regards,
Murali. -
Message no. V1321 - Item category ALES is not defined for this item
Hi,
I am trying to use ALES - Item Category for creation of the Sales Order. But i am getting this eerror message as Item category ALES is not defined for this item. Please let me know the config changes that i need to do to use this Item Category.
Thanks in Advance !!To maintain the item category for a sales order type first you have to assign the item category in SPRO.
SPRO>Sales & Distribution>Sales>Sales Documents>Sales Document Item>Assign item categories.
In the screen Change view Item category assignement:overview screen
select your sales document type + ItemcategorygroupUsageHigherLevel Item category
Then you have to maintain Default item category and Manual item category.
Default item category will be proposed by the system when you enter a material in sales order. You can change the item category to any one of the manual item category maintained above.
For e.g.: You are creating a thrid party sales order. Default item category is TAN, if manual item category is maintained as TAS for this combination of sales document type + ItemcategorygroupUsageHigherLevel Item category and then system will allow you to change item category to TAS. If this is not maintained then system will give you an error as"Item category TAS is not defined for this item".
Again depending the item category further acitivites will be carried in SAP, like in third party item (TAS) PR screen will be displayed.
Thanks,
Sarvesh Desai
Edited by: Sarvesh DeSai on Jan 11, 2012 7:08 AM -
'Item category SUBC is not defined for this item'
Hi,
When i tried to create an SO with item category SUBC, the system pop-up this error msg: 'Item cateogry SUBC is not defined for this item'
Please let me know what should i do? Thank you.
I've maintained the item category assignment with same item category group maintained in material master data..But it still not work...Dear Laa,
This is due to not done the itemcategory definition and determination.So
First you define the itemcategory SUBC through VOV7 transaction (By copying standard TAN)
Then do the itemcategory determination through VOV4 transaction for this combination
Sales document type+Itemcategory group--->Itemcategory
Itemcategory group is different from itemcategory.
Itemcategory group maintained in the Material master data
The item categroy will get determine in the sales order based on Sales document type+Itemcategory group
I hope this will help you,
Regards,
Murali. -
Err in PO creation-Sales document item is not defined for this transaction
Dear Consultants the errror occurs when we process Individual Purchase Order scenario.
Err in PO creation-Sales document item is not defined for this transaction
Thanks&Regards,
SanthaRamThis error because the item category is not determined correctly in the sales order.
Check the item category in Sales order line item, for Individual Purchase order scenario its TAB.
If its not TAB, then check the assignement for Item category in VOV4.
This thread is more of the SD part, so also put it in SD forum for better solutions.
Regards,
Sheetal -
Sales document item is not defined for this transaction in Pur.Order
hi,
At the time of convertion of pr to po one error message received.
Sales document item 46 000010 is not defined for the transaction
Message no. V1198
Diagnosis
You have tried to carry out a business transaction for this sales and distribution document item which, for this item, is not allowed.
This may be due to the fact that this item is not part of a make-to-order production with cost management in the sales order.
Procedure
Please check your entries.
this is MAKE TO ORDER SCENARIO THIS ERROR IS FOR RAW MATERIAL CONVERTION AGAINST SALES ORDER.Hi,
Check in material master MRP3 view there is field called strategy group where you have option to define the planning strategy like make to order/make to stock & like.
Regards
Ravi Shankar. -
Item Category: The specified category assignment is not found for this item
HI All,
I am loading Item category Assignment for Purchasing category Set, the standard prg fails and gives the error "The specified category assignment is not found for this item".
Where as for the inventory category set its working fine and the assignment is through.
Are there any changes required for this.
Thanks
BasawAs the error indicates, your servlet does not support GET method calls. Override doGet() method to do what you are doing in doPost to avoid this error. If you want your servlet to serve GET as well as POST methods, override service method instead.
-
EDM: item category D is not defined (check entry)
Dear all,
I'm setting up eDM and I keep getting the error "item category D is not defined (check entry)" during the creation of a document. This error is occurring with every document type, in every directory, every physical document, etc...
The strange thing is, that if I try to create a document in SAP using CV01N (and I fill out the same data), it creates the document without any error.
I tried to search for more information on this error, but there is none available. Has anyone encountered the same problem or does anyone knows how to resolve this error?
Kind regards,
SamuelHave you tried creating hierarchies in DMS? When you create a document in EasyDMS it creates a document hierarchy so you must replicate this to see if there error is occuring in SAP.
Have you tested to see if its an authorisation issue? I.e. test the same with SAP ALL/SAP NEW? -
Error message: The item category 'ZTPS' is not permitted for product '134'
Hi experts,
When I try to create a sales order in CRM, I find the error: "The item category 'ZTPS' is not permitted for product '134'".
how can I solve this problem?
thank you for helping me,
Marcohi,
I tried to perform the "define item category determination" activity, but the problem is that the possible entries for "Item category groups" and "Item usage" are different in the two systems:
for example in R/3 I find some entries with Item Category group = LEIH (returnable packaging),
when i try to insert this Item category group in CRM i press f4 to see possible entries but Ican't find the value LEIH.
how is it possible?
THANK YOU!
m -
Creating Sales Order- Item Category TAN is not defined.
Hello all,
I am working on Creating sales order for Global Bike Inc case. But when I enter the material and quantity number and click check mark it says "Item category TAN is not defined". Can some body help me how can we define TAN or why it is giving me that error.
Thanks in advance.
SujanHi SujanB,
As your question is already answered. An indicator that defines the characteristics of a document item.
For example, the item category controls the type and scope of:
Pricing
Billing
Delivery
Inventory posting
Transfer of requirements
Providing further deatils ;--
01. How item category is determined :--
Depending on the item category group that you apply & the sales doc type you are processing the system automatically proposes an item category in the document.
1.sales document type (source: order type)
2.item category group (source: material master)
3.item category of the higher-level item (source: user defined)
4.item category usage (The usage is defined by SAP and is hard coded in the programs)
SPRO- IMG- SD- Sales- Sales Document- Sales Document Item- Assign Item Category (VOV4)
Pls refer following link for furter details ;--
general item category group
item category usage in item category determination
http://help.sap.com/saphelp_46c/helpdata/en/dd/55fb13545a11d1a7020000e829fd11/content.htm
http://www.slideshare.net/magnatraining/item-category
Hope it helps....
Thanks/Rajesh -
Error msg 'Tax category UTX2 is not defined for country US' in RMDATIND
Hello,
We just upgraded our system from 4.6C to ECC 6.0 and have been using RMDATIND (BMV0) to load new materials into SAP. This worked fine in 4.6C, but now we keep getting the error 'Tax category UTX2 is not defined for country US'. It is error msg M3019.
I'm assuming that there is some configuration change we must make, but have not found the correct one so far.
Can someone guide us as to what changes we must make to be able to load new materials into our SAP system without getting this error message?
Thank-you,
RickI wanted to delete this message as I felt it was in the wrong section, but I cannot find out how to delete a message.
-
Item category L is not defined (check entry)
Hi,
While attaching a material to network with Item Category L, I am getting following error message.
Item category L is not defined (check entry)
Message no. CO131
I am able to attach the material with Item category N, but not with Category L.
Let me know possible reasone for same.
best regards,
Atul RajmaneHi,
In OS13, L is maintained with + for tick at PMStr location.
After putting Inventory management indicator on, I am able to add material with L category in Project.
But, every time I am addting material by default its taking Reservation for network. I am not able Select Reservation for WBS or PR + Res for WBS. I have not putting any of Procurment Indicator also.
Kindlly advice the same.
regards
Atul Rajmane -
Debliery Units : VENDOR IS NOT DEFINED FOR THIS SYSTEM
Dear Experts,
In prespective modeler , tried creating 'DELIVERY UNITS'. However get error message
"CANNOT CREATE DELIVERY UNIT AS CONTENT VENDOR IS NOT DEFINED FOR THIS SYSTEM" ?
How can we maintain CONTENT VENDOR ? we are using in-house HANA installation.
Regards
PrashantHi Shrikant,
Please do not reply with your same question in all of the threads which are answered.
What is the version you are using?
Where exactly you are unable to see?
Once you edited the field as mentioned by Jody, it will be in green circle. Also while creating the package, you can see this DU as shown below:
Regards
Raj -
Class type not defined for this object type
Hi Friends,
Could u please guide me ?..We have a requirement to extract some data from classification system.
This is related with class type 023 - Batch
I want to use the following parameters in CTBW.
basis datasource :Z_BATCH_ATTR
class type : 023
object table :MCHA
Datasource type : ATTR
I am getting an error "Class type not defined for this object type" when i enter the above entries in CTBW.
The only way I'm being able to make this work is changing object table from MCHA to MCH1.
This solution does not fit me bacause MCH1 table dont have Plant as Key, and I need it.
Do you know what should I do to solve this?
Thanks in advanceHi,
I believe we have to use the list of standard "Basis DataSource", as I'm also stuck with the same issue. Let me know what Basis Data source you selected in this case.
As I'm trying to extract Batch attributes from "AUSP" Table.
I have given class type= 023
Obj Table= AUSP
But not sure which "basis datasource" I need to select.
Thanks,
Satish -
Cbs build portal application dc fail. Build Plugin IS NOT DEFINED for this
hi all
I use NW7.0 ehp1,have portal and a nwdi.
I create a track at nwdi . and develop a portal application .
local build is ok . but when i check in .run a activitce. dc is broken.
log is -
CBS Request Log - [ 300/DEP_PESKM_D ]
Build number assigned: 314
Change request state from QUEUED to PROCESSING
REQUEST PROCESSING started at 2010-11-05 02:17:38.921 GMT
ACTIVATION request in Build Space "DEP_PESKM_D" at Node ID: 13,975,650
[id: 300; parentID: 0; type: 4]
[options: NO OPTIONS]
Waiting for access: 79 ms
===== Pre-Processing ===== started at 2010-11-05 02:17:39.000 GMT
List of requested for activation activities:
'deep.com_PESKM_1' compartment
tet
[ISN 111][created by YANLIANG at 2010-11-05 10:17:31.0][OID 6b2f604ae87c11df94ff000000d54062]
There is 1 activity in compartment deep.com_PESKM_1
1 activity will be processed by this request
Analyze dependencies to predecessor activities... started at 2010-11-05 02:17:39.031 GMT
Analyzing predecessors in compartment "deep.com_PESKM_1"
No dependencies to predecessor activities found.
Analyze dependencies to predecessor activities... finished at 2010-11-05 02:17:39.046 GMT and took 15 ms
Analyze versions... started at 2010-11-05 02:17:39.046 GMT
List Active Versions Report: "HTTP/1.1 207 Multi-Status" finished at 2010-11-05 02:17:41.812 GMT and took 2 s 766 ms
Synchronize metadata for [deep.com.cn/dc_logo_par] started at 2010-11-05 02:17:41.812 GMT
Verification of DL [ws/PESKM/deep.com_PESKM/dev/active/] finished at 2010-11-05 02:17:41.906 GMT and took 0 ms
Verification of cache (level 2: Comparison of attributes) finished at 2010-11-05 02:17:41.937 GMT and took 31 ms
Synchronize metadata for [deep.com.cn/dc_logo_par] finished at 2010-11-05 02:17:41.937 GMT and took 125 ms
< CHANGE > 'deep.com.cn/dc_logo_par' DC
Analyze versions... finished at 2010-11-05 02:17:41.937 GMT and took 2 s 891 ms
Analyze activities... started at 2010-11-05 02:17:41.937 GMT
Loading component definitions
1 component to be build in compartment "deep.com_PESKM_1"
Analyze activities... finished at 2010-11-05 02:17:42.000 GMT and took 63 ms
Calculate all combinations of components and variants to be built...
Analyze request DC BV... started at 2010-11-05 02:17:42.109 GMT
'deep.com.cn/dc_logo_par' variant 'default'
'deep.com.cn/dc_logo_par' variant 'default' cannot be built. ACTIVATION will fail.
Build Plugin IS NOT DEFINED for this component or the defined Build Plugin is INVALID.
Analyze request DC BV... finished at 2010-11-05 02:17:42.140 GMT and took 31 ms
===== Pre-Processing ===== finished at 2010-11-05 02:17:42.187 GMT and took 3 s 187 ms
Change request state from PROCESSING to FAILED
Error! The following problem(s) occurred during request processing:
Error! The following error occurred during request processing:Activation failed due to component "deep.com.cn/dc_logo_par" variant "default". The component is BROKEN.
REQUEST PROCESSING finished at 2010-11-05 02:17:42.187 GMT and took 3 s 266 ms
No build logs available for the request.
Edited by: yan liang on Nov 5, 2010 3:12 AMHi Yan,
please check the NWDI troubleshooting guide:
http://wiki.sdn.sap.com/wiki/display/TechTSG/%28NWDI%29%28CBS%29Q0030
--> Understanding Broken and Dirty DCs
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/30b7c94e-fc6b-2910-30b8-d34a7b51309e
Did you import the dependent build plugins for the track in question?
(tab "development" in the /devinf --> CMS webui --> Transport studio)
See also the sap note: #1080927 - Creating CMS Tracks for Common Application Types (http://service.sap.com/sap/support/notes/1080927)
Best Regards,
Ervin
Maybe you are looking for
-
How to call a javascript method after table load on JSFF Fragment load?
Hello, The usecase is to invoke a javascript method after table is done loading (fetching data) when user lands to a JSFF fragment. With JSPX pages I can achieve that by using PagePhaseListener. I have tried with RegionController as follows, and the
-
While running the COPA Actual Assessment(KEU5), system is giving the error message that number range for that particular controlling Area is in the crtitical area and may be needed to be enlarged. I enlarged the number range(Tcode KANK) and ran KEU5
-
Airport express wired modem?
Hi. My internet connection is slowing down so I was thinking about buying a new router. I have a desktop which can't connect to wireless signals so I have to connect it through a wired connection. My modem doesnt have a wifi built in so I was wonderi
-
Java and Microsoft Visual Source Safe
Hi, We have content in text files stored checked in to Visual Source Safe. I want to provide a web interface that allows users to update this content. To do so I will need to programmatically check in/check out files from VSS. Has anybody implemented
-
Has anyone come up with the answer? I've rebooted, rescanned, re uploaded, and the only thing that worked TEMPORARILY was a factory rest. As I uploaded my files back to the drive few at a time the capacity would show, change, go to a dash, show aga