Item category ZLCO L2N cannot be invoiced with billing type ZLR.

Hi experts,
I made one sales order with order type ZLCO.(Order relevant Billing type). At the time of doing VF01 i am getting the following error Item category ZLCO L2N cannot be invoiced with billing type ZLR.
Any one guide me to solve this problem.
Regs.
SR

hi
Kindly check the below
1.Check the copy control configuration  in the t code VTFA
2.Check the t code VOV8 sales document configuration
Regards
Damu

Similar Messages

  • Item category TA TAN cannot be invoiced with billing type F2

    Hi,
    I'm new to SAP SD . when i try to create billing for  a sales order the error is as follows:
    "Item category TA TAN cannot be invoiced with billing type F2"
    Please help me in solving this.
    Thanks,
    Challa

    Hi,
    Sorry i got got the answer. Item Cat TAN is delivery related billing wherein i tried to bill for the Order.
    Thanks,
    Challa

  • Item category TA YTAK cannot be invoiced with billing type F2

    Hi Experts,
    Error message in creating billing
    I did not make shipment and directly make delivery PGI This is transportation relevance showing in delivery.
    Is this reason preventing from creating F2 blling type?
    I am getting error for item category YTAK can not be invoiced with billing tye F2
    VOV8 order type is OR. F2 is maintained for delivery related and also sale order related billing F2. YTAK item category billing relevance A It has special stock indicator E. Copy control VTFL has Item category YTAK as below screen shots.
    Sales order is complete, delivery is complete and PGI is done. No order/delivery/billing block.
    I had made shipment configuration but for this delivery I did not make shipment but directly PGI.
    So is this error for billing?

    Hi,
    I have resolved this issue by creating shipment.

  • 0040000240 000010 Item category MSSC ZWVN cannot be invoiced with billing

    i have configured Ztype contract and Billing Type also done the copy control with my document type and Billing type with item category ZWVN but While doing Billing through contract in Billing Plan am getting error   0040000240 000010 Item category MSSC ZWVN cannot be invoiced with billing type FAZ
    Please advice to correct.
    thanks
    MS

    Hi
    I done the copying control with ztype created Order Type and Billing type i maintained header as well as item level as i mentioned earlier am creating Milestone billing for contract , once i make copy control as per defined in VOV4 am able to the billing but billing block is not working , i done all the setting for activating billing block but its not working,
    below are the setting config.
    Path: IMG -> Sales and Distribution -> Billing -> Billing Plan -> Define and assign Date categories -> Maintain Date category for billing plan type

  • Error of ZCQC TAN cannot be invoiced with billing type ZCQB

    Hi Experts,
    While creating billing document thru Sales Order (Compounding Re-Order type), an error "Item category ZCQC TAN cannot be invoiced with billing type ZCQB" is coming.
    Please provide guidance to resolve error.

    Hi PARIKH NIKHIL
    Maintain the copy controls in VTFA -(Order Related Billing)
    --Select your  Billing document & Sales order Document
    --In header
    Copying requirement- *001*
    Reference number-- E
    Check mark copy item number
    Save It
    --Check in VOV7 select your item category & check billing reference should be  B (Order Related Billing)
    --Raise Billing in VF01 with reference to order number
    Let me know if your problem is solved
    Regards
    Pradeep

  • Delivery type LR cannot be invoiced with billing type RE?

    Hi,
    I am refering below flow to create an return order, but face an error when creating credit billing document:
    ret sale order(RE)-ret delivery(LR)-post goods receipt(stock will be restored in corresponding storage loc)---credit for return(RE)
    Error msg: " Delivery type LR cannot be invoiced with billing type RE;
    Check the table entries for the copying control of billing
    documents and add the missing entries as necessary.
    Make the appropriate settings in Customizing if you have
    the authorization to do so."
    So i guess i might need maintain corresponding copying control for 'delivery document to billing document'...As the source order type is LR, and target order type is RE...I checked SPRO and found there are below inputs needed.  May i know what kind of data should be inputed normally??
    "Copying requirements
    Determ.export data
    Assignment Number
    Reference number"
    Thank you very much!!

    Hi
      In standard SAP credit memo for sale returns with refrence to return order only. (RE). Thats why you are getting this error. If your requirement is to refer the delivery quantity for the credit memo then you can do any one of the following
    1. Change the copy control setting for Return order to Credit memo.
        Go to VTFA transaction and select your return order type (RE) and Credit memo type (RE) and go to item category level and select your returns item category (REN) and change the billing quantity to 'D' -Delivery quantity.
        Now create your credit note with reference to your returns sale order. (not delivery). Onlly delivered quantity will be copied to the credit memo.
    2. If you want to create return credit memo with reference to your return delivery then follow the first two guy's reply. Also you have to do one more setting at your return order document type (RE).
       Go to VOV8 and enter ur return order type and go to details then enter the return credit memo type in the delivery related billing field. (FKARV) in the billing section.
    Regards
    Shiva

  • Sales document type ZA99 cannot be invoiced with billing type LR

    Hello Guys
    I am getting this error even if i have configured billing. Please help. Here is the error
    'Sales document type ZA99 cannot be invoiced with billing type LR'
    Thanks
    Venky

    If your process chain is like ZA99 (order) -> ZL99(delivery) ->ZF99 (billing) -> LR (invoice List)
    Then your copying control settings should reflect the same flow.
    VOV8: delivery and billing types to default as above
    VTLA: set up for ZA99 ->ZL99; VTFL: ZF99 ->ZL99; VTFF: ZF99 ->LR
    Since no copy control settings for ZA99 ->LR, itemCa at VOV7 is not order-rele billing, and no default value at VOV8, it can not be copied.
    If you do want to invoice your order directly like service item scenario, make customizations accordingly.
    Message was edited by:
            John MG

  • Sales docu type ZLCO Vs Billing type ZLR - Error

    Hi Experts,
    Pls help me in the following scenario : I made one sales order with order type ZLCO.(Order relevant Billing type) maintained in VOV8, when i create billing for this order i am getting the following error  Sales document type ZLCO cannot be invoiced with billing type ZLR.
    Regs.
    SR

    Hi,
    Pls check whether you have maintained the following settings:
    Did you maintain the Billing type ZLR in order related billing type in VOV8 .
    Did you maintain the billing relevance B     (Relevant for order-related billing - status acc.to order qty) in VOV7.
    Did you maintain the copy control from Sales document type ZLCO to billing type ZLR in VTFA.
    Regards
    M. Lakshmi Narasimhan

  • "All items from purchase order cannot be invoiced"

    Hello,<br />
    <br />
    I'm on a SRM 7.0 SP 5 system (ext-classic scenario). Here i try to create an invoice with reference to a Purchase Order, but none of my Purchase Orders can be used for reference. I get the following warning message 'All items from purchase order cannot be invoiced'.<br />
    <br />
    - Created via POWL (create with reference -&gt; invoice/credit memo) i always get the warning message 'All items from purchase order cannot be invoiced'. And no items are converted / can be used for invoicing. Additionally when i use the search option 'find purchase order' within the create invoice transaction i can not find any purchase order to use, it shows 'There is no search result' while there are plenty purchase orders marked with 'invoice expected'.<br />
    <br />
    I am able to create invoices without reference.<br />
    <br />
    I tried vendors set up only for 'invoice expected' and 'GR', 'invoice expected' / 'GR' / 'GR-based-IV' and 'invoice expected' only none of them works, indicators set on vendor master are correctly used on the created purchase order. Outputting PO doesn't make any difference neither.<br />
    <p />
    I have not set up the following (do i need to?):<br />
    - Deactivated the 'CRME' transaction type, no Credit Memo transaction type has been configured/is active.<br />
    - I have not defined the 'INV' transaction type as a follow-on document for my ECPO transaction type within the define transaction type transaction.<br />
    - Tollerances<br />
    <br />
    <b>edit</b> -&gt; i've already searched thorougly for SAP notes but no note seems to cover this particular problem.<br />
    <br />
    Help is very much appreciated

    Solved! Added SYS attribute for back-end system in organisational scheme.

  • Item category S can only be used with account assignment category

    Hello Gurus,
    When i tried to create a PO then error "Item category S can only be used with account assignment category" is coming
    for my plant and material.
    Could you please tell me where i have to maintain the setting of account assignement for a plant or material.
    In TA:-OMG0 item catergory S is maintained for a account assignement F but still this issue is coming.
    I think there is a problem in plant or a material.
    Please help me.
    BR

    Hi,
    How you are creating PO  ,so that you have error "Item category S can only be used with account assignment category"
    Check what t.code used for your PO creation and what document type used for your PO creation- which result defaulting item category S which in turn asking for  with account assignment category.
    Cross check transaction variant or screen variant used for your PO creation!
    Regards,
    Biju K

  • Cannot Add Invoices with more than one costing centers by SDK.

    Have no available DI Interface to access cost/profit center
    Cannot Add Invoices with more than one costing centers by SDK.

    Dear Srikanth,
    Thanks a lot for your reply.
    We want add a invoice with DI API, but the DI API provide only one costing center: CostingCode in Document_Lines Object. But we have two costing centers, one is department, the other is salesperson.
    This is my question.
    It will be appreciated highly if you give me a solution.
    Thanks!
    Xingjun Han

  • Smartform development for Planned service invoice for Billing type YL2

    I have a requirement for smartform which is basically for planned serice invoice for billing type YL2.
    My end user asking me to develop two layouts ( Two Main windows ) in one smartform its changing depend on the condition , that condition is if AFIH-ALART = Y06 and AUFK-AUART = YSM1 OR YSM2 OR YSM3 OR YSM4 THEN THE LAYOUT IS DIFFERENT.
    header and footer is same for two layouts  in one smartform.
    Pls suggest me how to give condition for changing main window depend upon the condition ,two main windows contain different data its changing on the above condition .
    Pls suggest me the solution for this query.

    hi
    as the layouts are different,  it is not possible to do this in main window because a smartform can have just 1 main window and you can't change the layout defined.
    create a secondary window with the other layout and this window'll be displayed only when the required condition is met and same applies to main window.
    hope this'll help
    Regards
    Dheeraj

  • Aggregating Item category in sales order to Invoice

    Hi
    There are two itemcategories in our sales orders one is revenue recognition type and other one normal item category, when we are billing the sales order, iam getting 2 invoice documents for the same sales document. Our client has requested is it possible to combine the 2 item categories to get single invoice.
    Is it possible to do that in SAP only with configurations?
    Thanks,
    Vaishnavi

    Hi Vaishnavi ,
    You can prevent multiple invoices for multiple item categories with the help of Copy control.
    In copy Control  there you will find one field called "Data VBRK/VBRP" there you assign a routine which determines the splitting criteria.
    In that routine you can define the Criteria as when to split the invoice. Take the help of your ABAPer .
    Hope this helps to you.
    Regards,
    Nikhil

  • Contract, Item category W & 'goods-receipt-based invoice verification'

    Hello gurus,
    In a contract item with the item category 'Material group', the indicator 'goods-receipt-based invoice verification' (field EKPO-WEBRE) is set.
    But, why this should be active?
    I need to tell you to my client why SAP is working in this way with item categoy = W - Material group.
    Do you know where I can find this information from SAP?
    Thanks in advance.
    Regards,
    Sandra Palomo

    Thanks or the answer, but, I saw before this customizing and it does not have nothing about GR-IV, only to Good Receipt and Invoice Receipt.
    Do you know where I can find this?
    Why is active this GR-IV indicator in the PO when the I have a Material Group Contract (item category W)?
    Regards,
    Sandra Palomo

  • Item category D can only be used with account assignment category

    Dear Guru's,
    While creating service PO, i am getting d above error
    wat it is ? Is it mandatory to maintain Ac assignment cat along with item cat for service PO ?
    regds,
    CB

    hi
    Item category D is used for services .services can not be stocked like stock item... these are for direct consumption hence account assignment is mandatory for Item category D
    u can enter K or U as account assignment and proceed with PO creation
    Vishal...

Maybe you are looking for