Item Deletion

Hi All,
We have EBS 11i (11.5.10.2) .
We have to delete some of the existing items via Open Inteface from item master which are not used in BOM.
Can anyone guide me to accomplish this task ?
regards & Thanks in advance...
Sanjay

Hi Sanjay
What Sabari has said is true about Item deletion. Having said that, it's not advisable to delete items against which the transactions has happened. The work around for the issue raised by you is to make the status of the Item as inactive, and it can be done through Item Open Interface if the amount of data is huge.
Thanks & Regards
Prakash Kumar

Similar Messages

  • How to set the conditions for item deletion approval workflow?

    Hi,
    I have created approval workflow for item modifications ie, when user try to modify an item, it will send a mail to Project Manager. For that I set the conditions in Change the behavior of the overall task: 1. When the task process starts 2 . When the task
     process completes .
    Change the behavior of the single task: 1.when a task is Pending.
    [I followed this https://www.nothingbutsharepoint.com/sites/eusp/Pages/5-Steps-to-Enhance-SharePoint-2010-Approval-Workflow.aspx ]
    My Requirement is that I want to set this same workflow for the scenario: when the user deletes an item it will send a mail (intimation mail for item deletion) to Project Manager. here i dont want to send modification mails when user deletes an item.
    When user modifies an item: 1. intimation mail, 2. Approve/Reject mail 3. intimation for approval / rejection mail.
    When user deletes an item: 1. intimation mail.
    How can we set it in one approval workflow?? where i have to set the condition for sending either item modification mails or deletion mail.
    Thanks,
    Praveen ji

    Hi,
    According to your post, my understanding is that you wanted to start approval workflow when item deleted.
    You should first make some changes to trigger the workflow when you delete the item.
    You can use the Event Receiver to achieve it.
    In order to trigger workflow on item delete you need to create event receivers and from event receiver call the workflow already attached with list.
    http://ravendra.wordpress.com/sharepoint-workflow-on-list-item-delete/
    You can also create custom action to start the workflow, you can refer to the following article, then modify the workflow as your need.
    http://blogs.sharepoint911.com/blogs/jennifer/Lists/Posts/Post.aspx?ID=50
    Thanks & Regards,
    Jason
    Jason Guo
    TechNet Community Support

  • Error V1 392 , item deletion from PO.

    Hi All ,
    User trying to delete few line items from PO but while saving system throwing below message and not able to save the document.
    Because of this info message user unable to save the PO with line item deletion.
    I google the issue but no success.
    Kindly suggest.

    Hi,
    Thanks for your reply.
    More details :
    Order got created via a batch job. We are getting the order from external application with all the details.
    Order created in system with Sloc in the line item level.
    This line item externally procured hence created a PR in line.
    PR converted into PO with same Sloc in PO header line item.
    This Sloc also present in material master Prod. stor. location & Storage loc. for EP , MRP 2 view.
    Strange thing is that ,
    In the same PO there are few items deleted already which was in the same situation.
    But getting above problem to delete remaining items.
    Please suggest so that I can check any other areas which are unattended.
    BR,
    Stone.

  • Disabling "Item Deleted" notifications in Collab

    Our users are loudly complaining about "Item Deleted" notifications coming through from Collab subscriptions.
    I know there are templates for the emails, but even if I deleted the template I'm sure it would still trigger something (like a blank email).
    Anyone know how I could go about changing things up to block those types of emails from all users? I'm assuming that is a PEI?

    could you put an "unsubscribe" link right in teh collab email template? I think it woudl be possible to link directly to the "my subscriptions" link in the users My Account page.

  • Sales order line item delete error for MTO sales order

    Dear Experts
    iam facing below error for MTO sales order line item deletion
    "For reasons of cost management, item 000040 cannot
    be deleted"
    Please help
    Regards,
    KEdar

    It looks you try to delete the sales order line item and you get this error message.
    Try to put reason for rejection for the line item and save the order. This is equal to deleting the line item.
    You can also refer the OSS note 14097 - Order item cannot be deleted/overwritten for further information.
    Regards,

  • Item Deletion Flag

    Dear Mentors
    Where i can check item deletion fiag (mm06) whether item flag is active or not ?
    Regards
    Laxman

    Hi,
    You can check it in MM06 one-by-one.
    If you have several goods to be checked you have to use SE16 (to check tables) or SQVI (to create query using two or more tables).
    Since you can mark a material with DF at different organisational levels, you have to use the appropriate material master tables tables.
    E.g. if you marked your goods at client level the DF can be found in table MARA (MARA-LVORM). If you marked your goods at plant level, try table MARC (LVORM). You can use DF at SLoc level, WH level, etc...
    BR
    Csaba

  • Redetermine pricing on item deletion

    Hi,
    We have a requirement where in we need to recalculate the price for remaining product on line item deletion. We have a condition type ZE30 the value of which is set using custom exit. In the exit the value of the constant InactiveFlag (PricingCustomizingConstants.InactiveFlag) is set to value INACTIVE_DUE_TO_ERROR, based on the value of total net price of the order. When a line item is deleted since the total net price is affected, accordingly we need the value of condition type ZE30 for the remaining line item to be updated. On deleting a line item we see that the exit is not called at all. Only when the order is saved the exit is called.
    We are using B2B Webshop and in the initial order page when a line item is deleted we see that the price is not updated. But if we click on 'To Order' button the price is updated correctly. Is there any way to recalculate the price as soon as Update button is clicked?
    Thanks & Regards,
    Amrutha

    Hi Amrutha,
    Please share if you have fixed this issue. I am facing similar problem.
    Thanks in advance,
    Regards
    Suvitha

  • Item delete - Any quick ways of removing the found constraints errors

    All
    On 12.1.3 and looking for advice for people who have done the Item Delete and have found a quick way to remove the rows in the tables that the constraints find?
    I have 195 items with an avg errors equaling 11 which comes out to 2,145 errors that need to be fixed.  Looking to see if anyone has come up with a quick way to remove the items, .....
    and the resulting errors
    thanks

    hello sir,
    i want to your help
    i was installed fresh windows 7 via cd rom and then after installed all software.
    and now after 1 day customer complained me that cd rom not read any cd and i m also check when i insurt cd so its not read and when i am double click on cd rom icon its eject so what i do for that please reply on my email address.
    [text removed for privacy]
    VIMAL

  • Deleted Items deletes email weekly

    I am using the Exchange setup on the iPhone for my work email (Exchange Server). Everything works great for email except that messages in the Deleted Items folder get trashed after one week. And, yes, we do have IMAP enabled on the server.
    The iPhone is set to 'Never' for removing/deleting items in this folder.
    I do not want any messages in the Deleted Items folder to be deleted unless I do it manually.
    Any idea? Thanks, in advance.

    Moreover, the iPhone gives the option of how to handle the various folders and its set correctly. Only on the iPhone is the email in the Trash (i.e., shown on the iPhone as Trash but on .Mac in Deleted Items).
    If you have the Deleted Items server stored mailbox for the account selected as the mailbox for messages marked for deletion to be placed when Entourage, this server stored mailbox should be available to be designated as the account's server stored Trash mailbox for the account preferences with the iPhone's email client.
    Do you have the Deleted Items server stored mailbox designated as the account's server stored mailbox with the iPhone's email client? Seems like you would want the same server stored mailbox designated with both email clients - with Entourage and with the iPhone's email client.
    No folder should delete items.
    True.
    This doesn't mean anything by itself but I don't use Entourage and I've never had a problem with messages being purged from my .Mac account's server stored mailbox other than my designated setting which is the same with the Mail.app on my Mac. I also use the same server stored Trash mailbox with both - because I have only one.

  • LIne item deletion -availability

    Hello Everyone,
    I am in a bit of a pickle. I had 2 KAs for a material/serial number combination say 1 and 2. The material has been confirmed in the schedule line
    in KA 1 but then BP wanted to bring it in using KA 2 so he assigned a reason for rejection for that line item in KA 1 so he could confirm the schedule line
    in KA 2. This didnt work.
    Unfortunately I deleted the confirmed schedule line in KA 1 and then deleted the line time itself in KA 1. This didnt result in the  material being available for a return with KA 2.
    As a result of the above in MMBE the material is still with the customer (KB)(we are using KB and KA for rental process mapping)
    but if look at KA 2 availablity check result for the material that qty is still confirmed against KA 1 line item which we deleted.
    Please assist in bring the material to available
    Regards
    Madan Shetty

    I had 2 KAs for a material/serial number
    What do you mean by KA??  As far as possible, please dont use any abbreviated words and conclude everybody would read your mind.  I presume it is order type.
    When you say rental processing, I don't understand why you were involving delivery.  Ideally, the process should have been Order related billing.  Also are the two lines have same material code? 
    Please share maximum informations both from business perspective and SAP point of view so that suitable suggestions can be given.
    G. Lakshmipathi

  • Inbound delivery item deleted is not deleted from BI DSO?

    Hi All
      An Inbound deliver created and pushed to BI..
    Source PSA is FULL UPDATE and DTP is DELTA UPDATE
    Ex: 800000 10   10000
                        20  10000
    This is what pushed to ODS..Later next day,
    they deleted the to 800000 10 10000
    So PSA is refreshed with one item .
    800000 10 10000
    whereas DSO still shows as follows:
    800000 10 10000
                  20 10000
    I have following options:
      1. convert DTP to FULL update, so the data gets refreshed..
    2. ELse delete the only one record..
    But user sometimes need to delete the inbound delivery....based on item required..
    we cannot go and delete everytime for this issue..
    What are the best solutions that you experts can suggest.??

    HI...
    This is a known problem in ECC-BI.   Deliveries can only be deleted from ECC system but can not be cancelled. So the extractor is not able to provide a deleted image for the record. 
    Two solution can be there,
    1. Full Load of all BI target every day ---this solution is practical only when your data volume is less and full load does not take much time. But if your data volume is huge and flow is complex one then this is not the solution.
    2. Second solution is to identify which Delivery Doc - Item combination got deleted from ECC system and then you can just put a flag against those documents. 
    You can easily find which doc- item got deleted from CDPOS and CDHDR entry. In our project we created one DataSource based on InfoSet Query ( SQ02) on CDPOS ( item level) and CDHDR ( header level) and pulling all the documents which got deleted in ECC system. For all those Delivery-Item we put a deletion flag and restrict the query accordingly.
    in CDPOS following fields are important.
    a) CHNGIND: Change Type (U, I, S, D) u2013 This field shows whether the entry is deleted, updated or inserted. We are here interested in the value: D (Deleted).
    b) OBJECTCLAS: Object class u2013 This field is used to get the data related to Deliveries, Sales etc. For deliveries, value is LIEFERUNG; For Sales, value is VERKBELEG
    c)TABNAME: Table Name u2013 This field contains the table name from which the value is deleted. The tables for Deliveries are LIKP and LIPS. To get the item level data, keep the value as LIPS.
    d) TABKEY is 18 characters long field, in which first 3 numbers is the client number, next 10 shows the document number and next 5 shows the item number. E.g.: 750001099999900010, where 750 is client, 0010999999 is document number and 00010 is item number
    Also have a look at How to Guide below
    Link [CDPOS-CDHDR|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50dd3fb9-0dad-2d10-0ea7-cbb0bb8b391b?QuickLink=index&overridelayout=true]
    how to view deleted delivery
    Regards
    Anindya

  • Contract and sales order  item deletion

    Dear Experts
    I am facing a problem in a praticular scenario.In our process we are making quotation(thru VA21)>Sales order>delivery>PGI>Billing
    Now if we have a material code Z with qty as 10 in quotation the same gets copied to the sales order.But if i wish to delete the same line item in sales order , system prompts that this item refers to the quotation so it cannot be deleted.
    Now if i go to quotation and try to delete the same line item , then also the system prompts that the sales order XXXX refers to this line item , you cannot delete it.
    I wish to delete the same from sales order as well as the Quotation also.Kindly advise
    Regards
    Naveen
    Edited by: Naveen Sharma on Apr 16, 2010 11:11 AM

    Hi Raga
    But my problem is for ex. i have prepared quotation for Material codes
    X-->5 QTY
    Y-->6QTY
    Z-->7 QTY
    Now the sales order is also having the same 3 material codes.After this we had done the delivery for lets say only X & Y.We dont wish to do the delivery for Z material so even i am going back to VA02 and trying to delete it the system prompts the earlier messages which i had explained
    My requirement is to delete only Z from SO & Quotation

  • Sales invoice carrection  & item deletion from sales order after PGI

    Hello Sir ,
                   i want to change the item price after billing , account document is created .
                   what can i do for it ?
                  and second is . i want to delete line item from sales order after PGI
                  like  after delivery customer want  to change the goods .
                  please ans me asap
    Thanks
    Arvind
    Edited by: saparvind on Nov 5, 2009 5:30 PM

    Hi ,
    i want to change the item price after billing , account document is created .
    what can i do for it ?
    Once the Billing document and corresponding Accounting document created, then you have to cancel the BILLING DOCUMENT to change the Price.
    To change the Price , If it is Manual price directly you can change in the Billing document.
    If the Price is coming from the CONDITION RECORDS then you have to UPDATE the pricing to the  CARRY OUT NEW PRICING in the Billing documents, with Option B
    i want to delete line item from sales order after PGI
    like after delivery customer want to change the goods .
    For this you have to reverse the PGI in the Transaction code VL09 and then cancel the DELIVERY in VL02N---Delete.
    Now you can change the Goods in the Sales document in VA02.
    Please check the above and revert.
    thanks,
    santosh

  • Purchase Order Item deleted; purchase requsition quantity not update

    Hello,
    We have PR-20025224 item 130 the quantity ordered is 200 on 2 PO 4200039509 and 4200083799 (100 each)
    One of the PO (4200083799) is deleted (No GR)so the quantity ordered should be 100 only in the purchase requisition u201CStatusu201D tab.
    Normally the program RM06HL04 should correct the quantity ordered but it does not.
    In the status tab in purchase requistion details are as below
    Proc Status:- B PO Created
    Block ID - Not Blocked
    Ord Qty - 200
                 - 05 Relese Completed
    Thanks to help me in this issue.

    Hello Jurgen,
    Thanks a lot for the reply.
    I checked the deleted PO, in "Delivery Schedule" tab at right end the last column is "PReq Closed" and it is blanked.
    Actually the client need is, once the PO deleted, in the purchase requistion "Status" tab "Ord Qty" gets changed (In this case it should reduce by 100 no from 200 nos, because other PO is for 100 nos)
    But PR Ord Qty does not changed.
    Is it possible that, the PR quantity gets changed once PO deleted?
    Thanks for the reply and hep.
    Hemant

  • Purchase Order line items deleted after coying from PO in GRPO

    Hi All,
    Does anyone here experienced this problem? The user reported that after adding the GRPO that generated by copying from PO, they found out that the line items in PO has been deleted? We're trying to reproduce this problem but we're unable to reproduce it.
    Thanks and Regards,
    Vin

    Hi Melvin,
    Which version of SAP B1 you are working on ?
    So if your PO item lines are deleted when copying to GRPO are you able to track the Base document from the GRPO. having the particular GRPO opened enable the form settingsa and make visble the Basetype and the other fields and check if the PO No. is available.
    If this is a one of issue or you experience the same then thsi issue can be reported. If you have a back up of the DB before this transaction of PO copied into PO, restore the backup and check if the same applies.
    Regards,
    Rakesh N

Maybe you are looking for