Item does not come to delivery screen. VL01N

Dear all,
After I create customer order, I invoice it then I create Delivery.
But some materials does not come to delivery screen(VL01N). Some of the materials ok..
To fix this What should I do?

Hi,
Not sure if I understand your brief description on what you did correctly in the system.
Are there more than one type of item category in your Order (i.e. order-relv. and dlv-relv billing)??
You mentioned you created an Order --> Invoice --> Create Delivery..
Where order-related item is concerned, it will appear in Billing when you reference the Order number.. but where delivery-related billing is concerned, the delivery should be completed (i.e PGI) and then billed accordingly (using delivery number as reference)..
Hope this helps.
Rgds.

Similar Messages

  • Press Alt to popup Menu Toolbar, Click on a Custom Icon and the item does not come up AND the Tool Bar closes

    Options-->Menu Bar is Unchecked(off) (so, TABS are at the top of the screen):
    Press Alt to popup Menu Bar, Click on a Custom Icon and the item clicked on does not come up -and- the Menu Bar closes.
    So, Alt->Popup Menu Bar->Click a Custom Icon does not function properly.
    see Troubleshooting Info below-->

    First off if you have Firefox4 you probably also have an earlier version such as firefox 3.6.15 installed. By default firefox installs these in slightly different locations, but it leaves it up to you to create a separate profile for each version. The profile is where firefox stores data and settings. I am not sure that firefox explains this clearly, but you will run into problems if you do not have a separate profile for each version of firefox. See http://kb.mozillazine.org/Testing_pre-release_versions
    To try to get the toolbars working correctly, after you have ensured you have separate profiles in use for each version ( the following action will make changes)
    # use the restore default set from the customise / customize toolbars dialogue
    # if that does not work then
    #* use [safe mode] and the option [X] reset toolbars and controls

  • I cannot connect my printer.  The nearby option does not come up on screen.

    I cannot connect my hp photsmart printer.  The "Nearby" option does not come up on the screen and it won't respond when I type in the name.  The computer's wireless is working as well as the wireless on the printer. 

    Hi Icullinan,
    Welcome to the Support Communities!
    The article below may be able to help you with this.  Click on the link below for more information:
    OS X: Printer and scanner software available for download
    http://support.apple.com/kb/HT3669
    Apple delivers third-party software for scanners and printers using Software Update. To set up your printer or scanner, just connect it to your Mac. If software is needed and available, OS X automatically downloads and installs it.
    This article is a comprehensive list of currently supported printer and scanner models and associated software provided by third-party vendors as of 23 January 2014.
    OS X Mavericks: Set up a printer
    http://support.apple.com/kb/PH14143
    OS X: Connecting a Wi-Fi printer to your Wi-Fi networkhttp://support.apple.com/kb/ht3500
    Cheers,
    - Judy

  • HT5840 using finder to locate an item, item does NOT come up so to upload or find

    in finder, attempting to search for an item and/or to upload. only a non-selectable line item will appear and nothing on the view screen. Not a problem before maverick upgrade.

    aha!
    Wed Feb 14 12:29:16 2007
    PUSH:
    Received control message:
    'PUSH_REPLY,
    route 192.168.100.3 255.255.255.255,
    route 192.168.1.0 255.255.255.0,
    route 192.168.3.0 255.255.255.0,
    route 172.16.0.0 255.255.0.0,
    route 10.123.123.0 255.255.255.0,
    redirect-gateway,
    dhcp-option DNS 172.16.70.12,
    dhcp-option WINS 172.16.70.2,
    dhcp-option DOMAIN timberline.int,
    route-gateway 172.16.70.254,
    ping 10,ping-restart 120,
    ifconfig 172.16.70.216 255.255.255.0'
    The ifconfig line the server is pushing is not right. That is meant for a point to point connection. That is why the local client is puking on it...it is not correct. At least for a tun type device. If it was a tap, then it would be fine.
    http://openvpn.net/man.html
    (look for "--ifconfig l rn" )
    so.... change the line to dev tap, and then do this stuff..
    http://wiki.archlinux.org/index.php/OpenVPN_Bridge

  • My ipad screen is black and will not reset and does not come back after restoring, the info is still on internal because i can see it on itunes in the apps catagory it's the display is not working, can see backlight but black...does anyone know how to fix

    my ipad screen is black and will not reset and does not come back after restoring, the info is still on internal because i can see it on itunes in the apps catagory it's the display is not working, can see backlight but black...does anyone know how to fix, other than take it to apple.
    thanks!

    The wish list only works on apps you have to pay for. To get it tap the icon of the app you want to save. After it opens at the upper right corner is a box with a arrow. Tap that then tap add to wish list list in the box that opens.

  • My daughter forgot her password and now her ipod touch is disabled.  When I connect it to itunes it does not come up on the screen as a device.  What can I do to get her itouch working again?

    My daughter forget her password and now her ipod touch is disabled.  Red message says to connect to itunes.  When I do connect to itunes, the device is not recognized and then a message comes on the screen that says it is locked and to enter the password to access it.  I cannot access the password and since itunes does not recognize the device, it does not come up on the list on the left, i cannot reset it.  What do I need to do so she can use her ipod touch again?   Thanks

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen        
    If recovery mode does not work try DFU mode.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

  • My screen saver is not working on my desktop after a power outage. It is set for 15 minutes but does not come on.

    I had a power outage. when the power came back, my screen saver does not come on after the set 15 min. Every thing seems fine. How do I get it to start working again?

    safeboot
    trash plist
    repaur
    ... and invest in 1500VA UPS

  • Full Screen Does Not Come Back After Minimizing Firefox to the Taskbar.

    Full Screen Does Not Come Back After Minimizing Firefox to the Taskbar.
    I work in full screen almost exclusively ... the toolbar and the URL are still displayed while in full screen.
    Before this version (30.0), when I minimized Firefox to the taskbar so that I could go to the desktop or to Windows Explorer, when I finished what I was doing and re-selected Firefox it would go back to full screen. Now, it does not go back to full screen. I can still see the taskbar. I have to press [f11] two more times to get back to full screen.
    I have tried with and without addons enabled. Same behavior. I have reset Firefox ... same behavior.
    I'm using Firefox 30.0 and Windows 7 (64 bit).
    Thanks.

    Hi moose53,
    Just tested it with a Logitech keyboard and you are right, what you are describing is not expected behavior. I see you do not have any add ons, however does this also reproduce in Safe Mode? [[Troubleshoot Firefox issues using Safe Mode]]
    If yes, try a new profile [[Use the Profile Manager to create and remove Firefox profiles]]

  • HT4943 I bought a magazine subscription on my iPAD and after being charged, it does not come up on my screen.  Has anyone had this problem?

    I bought a magazine subscription on my iPAD and after being charged, it does not come up on my screen.  Has anyone had this problem?
    When I click on the magazine, my screen is just blank.  I can see the purchase, and in my settings/store, the magazine shows "ON".

    I would do a power cycle/reset of your device first, if you haven't, to rule that out.
    http://support.apple.com/kb/HT1430
    If that doesn't help, talking to iTunes customer support would be in order...or whoever you purchased the magazine subscription through. 
    http://www.apple.com/support/itunes/
    If the magazine is browser based, you might also try another browser.  I like "Atomic Browser".  It is available on the app store. 

  • Laptop screen does not come on

    My 1 year, 1 month  old pavillion dv4 laptop\'s screen  does not come on. At first I thought it was the screen. However after geek squad and one other computer repair place diagnosed it, they said it needs the motherboard replaced.
    I currently have the laptop hooked up to a external monitor and it works fine in safe mode. Any suggestions where I can get a motherboard?

    Hi there ,
    Try Hard Reset
    Link is given Below :
    HARD RESET
    ****Click the White Kudos star to say thanks****
    ****Please mark Accept As Solution if it solves your problem****

  • HT5622 On Itunes, when I watch a movie does not come up. No Picture comes up but a green screen with other lines and stuff does. How can this be fixed?

    On Itunes, when I press on a movie that I would like to watch it does not come up. All that comes up it a green screen with other lines in it. How can I fix it?

    On Itunes, when I press on a movie that I would like to watch it does not come up. All that comes up it a green screen with other lines in it. How can I fix it?

  • Satellite M60 - screen does not come on when i reboot

    I have a Toshiba Satellite M60 and the screen does not come when I power down or reboot. It takes about 12 tries before it comes on. When the screen does not come on the computer still boots up ok just no screen.
    I have to put it in standby mode if I do not want the hassle of trying to get the screen to come on. Is this a screen or inverter problem?
    Any help would be appreciated.

    Hello Mark
    You cannot expect that someone here offer exact diagnostic to your problem. For instance, I can say yes, you need new display. And what now? Do you want to follow my opinion and order new display?
    What you really need is professional help. Technicians know how to handle with such cases. Maybe just some cable must be exchanged. I recommend you to contact nearest authorized service provider. Explain them the situation and let them check your notebook.

  • Screen does not come on

    Our MacBook Pro screen does not come on during hardstart, or from sleep mode.  Takes several re-boots for it to come up.

    Hi RCollier15,
    Thanks for visiting Apple Support Communities.
    You may find the steps in this article helpful for troubleshooting your display:
    Apple computers: Troubleshooting issues with video on internal or external displays
    http://support.apple.com/kb/HT1573
    Cheers,
    Jeremy

  • Print Screen does not come up

    Good Morning,
    I am having an issue with printing from Adobe.  I got an email with a PDF attachment and when I open the file and go up to File/Print the print screen does not come up and I cannot print the document.  I tried it on a seperate computer and it printed fine.  I have tried updating but that didn't do anything. 
    Does anybody have any ideas on why this might happen.  I was thinking that the file might be corrupt but as I said I can print from a different computer no problem.
    Thanks

    Actually, Reader is in a different forum. However, the print process should be the same. It sounds like you have a printing issue in the OS. What versions of Reader and of the OS are you using. There is a possibility the version of Reader you are using is not compatible with the OS. Other than that difference, I can see no reason you would not get a print window. Also, try with another PDF just as a check.

  • How come the item value does not come thru via PL/SQL anonymous block?

    Hi,
    It's a Form with 3 tables -
    1) ClinicianProfileTb (with about 40 columns, insert/update via DML),
    2) PeopleTb (with about 7 columns, insert/update via PL/SQL anonymous block) and
    3) ClinicianPracticeTb (with about 10 columns, insert/update via PL/SQL anonymous block) for after-submit-processes.
    So I have several After-Submit-Processes. For some reason, it appears that PeopleId which is supposed to come thru via the 2nd After-Submit-Process (ie: Insert/Update PeopleTb) does not do the way it's supposed to. And when I press "Create" button at the bottom, I got the following error msg:
    ORA-01400: cannot insert NULL into ("TEST_0712"."CLINICIANPRACTICETB"."PEOPLEID")
    I tried the "debug" mode (via edit page link), but to no avail. (I'm newbie, trying to learn and deliver at the same time :)).
    I uploaded the app to apex.oracle.com, if someone could kindly take a look and let me know what goes wrong, it'd be greatly appreciated.
    workspace: test_0712
    app: 43408 - TEST
    user: demo
    pswd: demoPswd
    Page#21 -> look at the After-Submit-Processes -> in "Insert/Update PeopleTb" it appears that PeopeId does not come thru; thus it cannot be updated to ClinicianProfileTb.PeopleId (allows null) -> and thus cannot be inserted into ClincianPracticeTb.PeopleId (which does NOT allow null). Basically my logic is that in order to create ANY row in ClinicianPracticeTb, BOTH PracticeId AND PeopleId must be present.
    Acutally I should have used the PeopeTb as DML (as the driving table) to enforce that PeopleId must be present in order to insert ClinicianProfileTb and ClinicianPracticeTb, but it'd be lots of codes to write to insert/update in ClinicianProfileTb (40 columns).
    In addition, does ApEx consider EVERY SINGLE after-submit-process are in ONE transaction for commit/rollback? It appears that it treats all PL/SQL anonymous blocks are in ONE transaction, while Automatic Row Processing (DML) is commited/rolled back on its own?
    Thanks much,
    Helen

    All blocks that do not commit in one of the ways I detailed (and which do not explicitly commit using a commit statement) are part of the transaction started with > the first DML statement issued in any of the page processes and continuing until a commit is issued.Say, there are the following processes in the After-Submit-Processes:
    1. Process1 -> Automatic Row Processing (DML)
    2. Process2 -> PL/SQL anonymous block
    3. Process3 -> PL/SQL anonymous block
    Based on what you describe, in the event that if there is no explicit "commit" issued in any of these processes, then an implicit "commit" will be issued at the end of Process3?
    Thanks, Scott.
    Doreen

Maybe you are looking for

  • C4C Integration issue XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault

    Hi All, Scenario: ECC to C4C I am getting below error while pushing message to C4C using SOAP channel with Http Protocol. SOAP channel has been configured with SSL Authentication. Regards, Mani

  • Expanding G3 B&W

    I have a G3 B&W 2 HDs(around 50 and other one 40), 400 Mhz processor,about 100 Mhz bus speed, and 896 MB of SDRAM. WHat do you think I should upgrade? I was thinking about the processor but I've heard bus speed effects it??? If so, can you upgrade bu

  • How to attach a tabstrip/subscreen to a splitter control/custom container

    HI gurus, Can any one tell me how to add a subscreen/tabstrip to a splitter control in module pool? thanx Sukriti.....

  • Check box is desables mode

    there is a custom transaction where check box is there, check box is used for selecting of particular record but when the transaction running , the check box is in desable mode what will be the reason. kindly help me.

  • CA-DMS and MM PLANT

    Hello, I create a DMS document type TE1 link with table MARC. But i want to link also the DMS in my material (MM01) but at plant. Can you help me ?