Item does not match schdule line ( program error ) message no . V1427

*Item does not match schdule line ( program error ) message no . V1427 .* This is the message I am getting when I am trying to display a quotation through VA23 . From here system exits the transaction .
As per my observation , when I compared VBAP and VBEP tables, there are 2 items in VBEP table with schedule lines but the same items are not present in VBAP table. User says he tried to delete these items because there is no quanity , Inspite of that these items appear in VBEP table .
The document is a reservation document where in schedule line category does TOR and availability check.
I checked various related notes - 442831 , 401463 , 389687 etc . These are quite old notes and I am in release ECC 5.0 .
What is the best way as this doc has nearly 30 items and nearly all of them have quanity confirmed .
Please provide your valuble inputs ...
Regards
Raghav..

Nitin,
Below are the steps to check
Transaction SE18
Definition name: BADI_SD_SALES
Menu: Implementation -> Overview
double-click on implementation: IM_CORE_CHECK
Now you will get an overview on the methods.
check whether implementation IM_CORE_CHECK is active or not.
If not Press the change button and activate
looking at the your system pack level this should be active. If it is active then the inconsistency must be modified directly at database level through Z report.
Ramesh

Similar Messages

Item does not match schedule line (program error)

Dear Experts,
I Transaction VA02/VA03 when i put Sales order number and try to get in to the system system through error and terminate the transaction
ERROR is "Item does not match schedule line (program error)" with Message no. V1427
when i check Table level and analyse thr Debuging i found that
Table VBAP line item 10 is missing and table VBEP line item 10 is there due to this miss match its shows above error
Question
Why and How it happen and how to fix this issue???
Best Regards
hanumant

Check Note 442831 - V1427: Item does not match schedule line (program error)
thanks
G. Lakshmipathi

Item does not match schedule line (program error) in sap

Dear Expert.
Greetings!
We are currently facing with this error (V1 427 item does not match schedule line (program error) in sap), when we open the sales order(VA02/03).
The error is occurring due inconsistency on the database tables, some Item is in table VBEP, but it is missing from table VBAP. This is what is causing the error message.
I checked various related notes - 442831 , 401463 , 389687 etc . These are quite old notes and I am in release ECC 6.0 .
Report SD_CONSISTENT_CHECK_EXT and SD_CONSISTENT_CHECK are already available.
Bapi BAPI_SD_SALES is also active.
Please let me know if anybody has any idea on the same.
regards
Praveen

Hi,
Refer the KBA: 1464620 - Error V1427: Item does not match schedule line which explains the reason and the solution for the issue.
Regards,
AKPT

Items does not match schedule line

Item does not match schedule line (program error) - message V1427 getting while accessing the Sales Order via VA02/VA03.
While we see in table VBAP we can see all the line items except the Item number 10 for the order. However, in the table VBEP, we see 5 line items for the Sales Order.
It is not allowing us to enter the Sales Order. Kindly help.
Thanks in advance.
Message was edited by:
Praveen Kumar

Hello,
we've got the same problem.
Because of some changes in an SD-Userexit the problems have been generated.
In our case the SAP-notes can't help to solve the problem with VBAP/VBEP.
I wrote an report which check and delete the excessive positions of both tables.
Hope it helps.

"The installed product does not match the installation source" error

Each time I attempt to use the SL disk to update the Apple drivers in Windows XP SP3 on my MacBook Pro 13" I get the error message posted in the title. I used this same disk successfully to update my MacPro. Anyone know what this means?
"The installed product does not match the installation source. Until a matching osurce is provided or the installed product and source are synchronized, this action can not be performed."

I get the same error, and I have an idea of what's going on.
When I try to install Boot Camp 3, Windows asks me to locate "BootCamp.msi". If I try to uninstall Boot Camp via "Add/Remove Programs", the same prompt comes up.
What I think is happening is that the original installer for Boot Camp 2.0 is being requested. But I have applied the Boot Camp 2.1 update, which has no BootCamp.msi file associated with it.
So I'm at a road block of sorts, unable to install Boot Camp 3.0. I cannot download the original Boot Camp 2.0 installer from Apple, only the 2.1 update. (I recently moved across the country and didn't bring my 10.5 media.)
Any ideas out there on what can be done to get Boot Camp 3.0 installed?
Message was edited by: Human Being

Error : Profit Center does not match with Business Area. Message no. ZGLTFI

Hi Everyone,
Error occurs when doing inbound PGR. Processed done so far are the following:
Normal PO created & released.
Inbound created
Transfer order created and confirmed.
When doing PGR via VL32N > click Post Goods Receipt error occurs
Profit Center does not match with Business Area
Message no. ZGLTFI0001031
Checked already in KE53 the Profit Center used was assigned to the Co. Code used in the PO.
The same Profit Center was maintained in material master.
The Plant used was assigned to proper division and business area.
Any other ways to check?
Btw not only in Inbound PGR the error occurs .. also happened in MIGO and MB1C.
Tried to do other transaction involing the material, plant and profit center all give the same error.
Any info shared is much appreciated.
Thank you.

this error is not a SAP standard error, it is an own message class (ZGLTFI0001), so it must be issued from a validation or user exit. Please find the user exit, or talk to FI Team and ask what they check

Applet version does not match SRM server version error in SRM

Hi Expert,
I get error as "Applet version does not match SRM server version" when trying to trigger the auction cockpit by clicking the button 'Live Auction'.
sap details:
OS : AIX
DB : Oracle 11.2
SAP_Basis : 740 patch 9
SRM server : 713 patch 7
I installed JRE 6. (1.6.0.45) in my local system also later installed JRE 8 (latest version) but still issue not resolved.
I try to implement below note which is showing message "Can not be Implemented" in snote transaction
"1846990 Applet version does not match abap server version SRM 703"
We are using ABAP LAC
Kindly advice to resolve issue
Regards,
Dev

Hi,
Issue resolved after implementing Note no. 2113801
Regards,
Dev

Utl_http does not give a very helpful error message: Invalid Parameter

I'm writing PL/SQL to consume a web service on another server. In trying to execute this snippet of code, I receive this error:
ORA-28783: Invalid parameter
ORA-06512: at "SYS.UTL_HTTP", line 1023
ORA-06512: at line 29
Line 29 is the utl_http.begin_request statement shown below.
I'm baffled as to what the error message might point to and I'm looking from any insight others may have. The message is so generic as to be useless and I can't find any examples of others receiving this particular error when executing begin_request.
Please note that this is an SSL/HTTPS connection. If I remove the "S" and just use HTTP, I receive an appropriate message from the web server. (A tiny web page telling me I should be using the https version and not the http version.) I can also go to, for example, Google or CNN's web sites and pull back data but those are not SSL connections. It is the SSL part that isn't working.
This isn't a SOAP error since I never get a chance to create my SOAP message and place it in the request.
I've tried changing the POST to GET and the HTTP version to 1.0 just to see if the error message changes and it does not.
My wallet file is in place on the database server, placed in an accessible folder by
the DBAs. This code can see the wallet, I believe, because if I change the wallet
path to something non-existent, I receive a different error. I imported the web site certificate for the site I'm connecting to and placed that in the wallet. I've been able to cause "certificate chain" errors with empty wallets, so I think the certificate is correct.
I used SOAP-UI (www.soapui.org) and was quickly able to connect to the web server and begin having a "SOAP conversation", so I know the web services I'm connecting to are working. It is something in the database itself that is preventing this from executing - the wallet, a setting in the database, something like that. But what?
=======================================================
utl_http.set_response_error_check(enable=>true);
utl_http.set_detailed_excp_support(enable => TRUE);
utl_http.set_follow_redirect(5);
utl_http.set_wallet('file:/...', '*******');
--**** SET THE URL FOR THIS REQUEST *******
http_req:= utl_http.begin_request(
'https://....' --location of web services I want to use
, 'POST'
, utl_http.HTTP_VERSION_1_1
=======================================================

You seemrd to have ruled out most potential problems I could think of.
The error message just states that there is something wrong with the parameters that you use. Only point I can currently think of is a problem with the returned value.
How did you declare you http_req variable? Does it use the utl_http.req type?

HT4108 Digital AV adapter does not support iPad 2. Error message "This accessory does not supported by iPad"

Just bought latest digital AV adapter MD098ZM/A. Does not work with my iPad 2. Error messade" this accessory is not supported by iPad" while the package saying it supports iPad 2 and later.

It's works with the new iPad. It said "accessory not supported". I clicked OK and now it works.

ITunes does not open and gives no error message on Vista

Hello,
I have an iPhone 4 on Windows Vista and haven't really had any problems until recently. Nothing has changed (that I am aware of) on my Vista machine but now, iTunes won't start and I am not getting any error message. It just brings up a message box that reads, "iTunes has stopped working. A problem caused the program to stop working correctly. Please close the program." Then I have the option to close the program and that is it. No error messages or any other indication of what is going on.
When I first encountered this, I followed the steps here: http://support.apple.com/kb/ht1925 and removed and reinstalled the latest version of iTunes (which was already working). I actually did it twice because I thought I messed it up. I was still getting the same problem.
I did try setting Bonjour to Disabled in Services as written here: https://discussions.apple.com/thread/2618748. That actually seemed to work, but only twice. I am back again to the same issue.
Any ideas at what I should be looking at to help solve this issue?
Thank you for the help.

b noir,
Here's some additional information. Between the time you responded and I had uninstalled iTunes and cleaned it up. Also, I followed the steps to install iTunes without all the extra "stuff" from this article: http://www.zdnet.com/blog/bott/the-unofficial-guide-to-installing-itunes-10-with out-bloatware/2390
After I installed it, using the guide, I realized I had accidentally installed version 10.0.0.6 (or something like that). However, iTunes was working. Except, when I connected my iPhone4, I got an error saying that I needed to update iTunes because it wasn't compatible with my iPhone (or something like that). That was my fault for not installing the right version - but it did work.
So I went through the whole cleanup again, checking the registry, folders, etc. for any traces of iTunes or Apple stuff. I then reinstalled the latest version of iTunes using the ZDNET article. However, when I started it, I got the same crash again. Below is the information from Problem Reports and Solutions:
Problem signature
Problem Event Name:    APPCRASH
Application Name:    iTunes.exe
Application Version:    10.4.0.80
Application Timestamp:    4e262cf4
Fault Module Name:    iTunes.dll
Fault Module Version:    10.4.0.80
Fault Module Timestamp:    4e262cc3
Exception Code:    c0000005
Exception Offset:    00825941
OS Version:    6.0.6002.2.2.0.256.4
Locale ID:    1033
Additional Information 1:    fd00
Additional Information 2:    ea6f5fe8924aaa756324d57f87834160
Additional Information 3:    fd00
Additional Information 4:    ea6f5fe8924aaa756324d57f87834160
Files that help describe the problem
Version.txt
AppCompat.txt
memory.hdmp
minidump.mdmp
View a temporary copy of these files
Warning: If a virus or other security threat caused the problem, opening a copy of the files could harm your computer.
Thank you for all your help.

Firefox 11.0/12.0 does not launch and provides no error message, how can I fix this? Windows 7/8

Running Windows 7 on one partition, and Windows 8 Consumer Preview on another, Firefox does not open for either.
Firefox crashes upon opening without an error message. I have reinstalled and manually cleared profile information. If I create a new profile, it works until I close and try to relaunch requiring me to make a new profile.
I have tried removing/reinstalling java as well (just in case), as I had been editing some of the java installation from my Windows 7 partition.
As I launch the Firefox, if I watch the task manager, Firefox.exe appears for a moment, but disappears almost immediately.
No files appear in 'C:\Users\[Username]\AppData\Roaming\Mozilla\Firefox\Crash Reports' directory with the exception of the 'InstallTime*********' file.
*Information posted in the "Troubleshooting Information" section below is from the Windows 8 Consumer Preview partition. There are some errors with my display driver not being updated properly, but Firefox -was- working on Windows 8 Consumer Preview until just recently, so I am assuming that is not part of the issue.

Noah_SUMO,
Regarding Naomi Internet Filter, I verified that it was -not- something installed (I hadn't heard of it before, but I made sure nevertheless in case it piggybacked on something).
As far as system restore software, I keep none =x
Never have, and I change over OS's relatively often (I went from 7 this past fall to 7/Kubuntu/BTLinux, to 8DeveloperPreview/Kubuntu/BTLinux, to overwriting Kubuntu with 7 a few weeks later, overwrote 8DevPrev to 8ConsumerPreview, and then removed both linux partitions and remerged with a fresh install of two separate partitions for 7 and 8 (I help with some OS compatibility/stress testing for a friend's software development company).
As far as software that monitors or interacts with online connections..
Adobe Flash Player 11 Plugin, Apple Application Support, Apple Software Update, Bonjour, Google Chrome (not that it's preferred over FF, just over IE ;]), Java(TM) 7 Update 3, Microsoft Security Essentials, Microsoft Silverlight (I started having issues not long after I installed Silverlight, however I don't feel like this is causing any issue, as I tried removing it and reinstalling everything from scratch, but no luck), Mozilla Firefox 11.0 (x86 en-US)/Mozilla Firefox 12.0 (x86 en-US), Mozilla Maintenance Service, No-IP DUC (tested this and found no difference or ability for it to hinder FF), (previously) Skype 5.8, TortoiseSVN 1.7.5.22551 (32 bit), and WinSCP 4.3.7.
None of which I've found to have issues with Firefox in the past, as well as FF was working with them until just recently.
As far as I can tell, automatic updates were disabled for everything (including my OS), and no changes had been made to any of the software, with the exception of I had installed Silverlight, but as mentioned earlier, I didn't find any issues with this.
Like you say, my best guess at this point would be that there's something funky set up with my partitions, and so I may just do another fresh wipe and try again (it just takes forever to get everything installed that I need for school, so I'll probably just wait it out for a while).
The only reason in which I would go against it being a partition setup issue, is that it -was- working. However, I do recognize that something could have come up after a while (not sure how, but I don't doubt it).
I hadn't thought about downgrading past 11, but it's definitely worth a shot, and I'm more than willing to try. once I'm done with stuff today I'll give it a shot and post the results here.
Thanks so much for your suggestions.

Windows does not have a constructor: 244 error message

I'm using CS6 for the first time to process some RAW files using the Photoshop Automate>Fit Image script. When I tried opening one RAW image into Photoshop to create an action I got the following error message:
"ReferenceError: Windows does not have a constructor: 224"
Never seen that in all my years of using Photoshop. What's causing this and how do I fix it?

No older versions installed.
I was however able to do the following:
From Bridge I ran Photoshop>Batch. In that menu I selected an action I created in a previous version of PS that included the Fit Image script. I clicked ok and everything ran perfectly. The problem is I can't run Fit Image directly from Photoshop using conventional methods.
As for my system info, I am running the following:
Windows 7
Quad core i7-3610QM @ 2.3GHz
8GB of RAM
nVIDIA GeForce 650M - 2GB
750GB HD
Could there be any other troubleshooting solution besides running reinstall? I want to exhaust all efforts before going down that path.
Thanks.

TS1363 iTunes does not detect my iPhone, sends error message, please help

iTunes does not detect my iPhone when I plug into ligthening cable- error message 0xE8000084 appears, please help

Hello Brian,
Here is an article that should point you in the direction of a resolution. It has a section about the OXE errors.
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/ts3694
Unknown Error containing "0xE" when restoring
To resolve this issue, follow the steps in iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting. If you have a Windows computer with an Intel® 5 series/3400 series chipset, you may need updates for your chipset drivers. See iTunes for Windows: Issues syncing iOS devices with P55 and related Intel Chipsets for more information.
All the best,
Sterling

I am unable to install adobe digital edition 3 on windows 8. It does not open and gives an error message. Please help.

I have downloaded and installed adobe digital edition 3 in my windows 8 laptop. But it fails to open. I get an error message saying "adobe digital edition has stopped working. A problem caused the problem to stop working correctly. Windows will close the program and notify you if a solution is available". I have downloaded the set up file from the adobe site from the link http://download.adobe.com/pub/adobe/digitaleditions/ADE_3.0_Installer.exe. Can anyone help. I have bought online books and I am unable to read them unless this is installed.

Hi Kishore,
Which OS are you using?
There are some solutions mentioned on this thread that might be helpful to you :Re: adobe digital editions has stopped working
You might also want to check the KB : Installing Adobe Digital Editions 2.0 in Windows Vista
Regards,
Rave

HT1414 My child's itouch is locked out. When I connect to computer, iTunes does not recognize it and the error message says I have to unlock the device? I can't unlock the device because password is unknown? How do I reset if I don't know the password?

My child's iPod touch is locked. No one knows the password. I have tried connecting to iTunes but since itouch is locked, iTunes will not recognize It. How do I unlock the itouch? The hard reset does not work either.

iOS: Unable to update or restore

Item does not match schdule line ( program error ) message no . V1427

Similar Messages

Maybe you are looking for