Item got stuck with the status of "Ready to Release"

I have one iten with huge quantity in Sales order.. i have transacted it.. but now there is some change in qunatity .. so now i am trying to backorder this line, now when i back ordered the line... some of it`s items got stuck in the status of Ready to Release status... i have released the sales order 3 times still it`s status is not changing.. can you tell me how to solve this issue.. i want to back order the line, which is stuck in the status of Ready to Release status...it`s little urgent...
Thanks

Hi,
Are there any ship sets? Is the order or order line on hold?
How are you releasing these order lines: from Transactions form or from Release Sales Order Form? If you are using transactions form, what is your default staging sub inventory? Is your item enabled to be transacted in this sub inventory? Is the sub inventory under locator control? If so, have you defined a default stage locator?
If you are using Release Sales Order Form, in folder Order, did you change the order parameter from “Unreleased” to “All”? Is Prior Reservations Only checked? If so, uncheck it. If it is checked; only orders with reservations will be released.
Regards,
Ketter Ohnes

Similar Messages

My iphone 3g got stuck with the apple logo and loading bar since last night when i try to reset the iphone pls help thanks!

My iphone 3g got stuck with the apple logo and loading bar since last night when i try to reset the iphone pls help thanks!

Can you reset the phone by holding the on/off switch and home button down until your phone reboots and the Apple logo again displays?

Got stuck with the installation

I'm downloading trial version of Photoshop using the Creative Cloud application, but i got stuck at 47%.
I don't have any internet problems and my PC owns all prerequisites.
Does it happen to someone else or only me?

I'm using the Creative Cloud application.exe that i've already downloaded, so i'm not using a broswer for installing Photoshop
I've hard disk space, i'm not having any issue about permissions or priviliges. I'm using Win 7 64-bit
Anyway i tried to cancel the installation and then i started it again. After aproximately 1h30 i got stuck again at 47%.
(i'm using Italian version)
PS: I have no internet problems.

When i first got my ipod touch 4th generation i connected it to itunes but on my computer said new device found but on itunes there are no devices found so im stuck with the connect to itunes symbol on my ipod

i got my ipod touch 4th generation and when i first connected it to itunes it would say device found on my computer but on itunes it would say no device found so im stuck with the connect to itunes symbol on my ipod touch like when u first turn it on

Try here. Start with the one the best fits your symptoms.
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
iPod not recognized in 'My Computer' and in iTunes for Windows
iPod: Does not appear in Windows or iTunes and Device Manager is empty

I was trying to update sofwatare for my iphone 4s, i got stuck with recovery mode and only option i see is to restore from factory setting. Do i lose all the the datas ? i did't had any backup. What is a solution?

I was trying to update sofwatare for my iphone 4s, i got stuck with recovery mode and only option i see is to restore from factory setting. Do i lose all the the datas ? i did't had any backup. What is a solution?

If you didn't back it up, your data is gone. There is no "solution" after the fact.

I'm importing more than 1800 photos, and it got stuck with 382 photos left to be imported. How can I finish the import completely?

I'm importing more than 1800 photos, and it got stuck with 382 photos left to be imported. How can I finish the import completely?

What version of iPhoto?
Are these photos different in any way? Black and White, for instance?
Regards
TD

Sales doc items with the status CLSD ARE being selected for month-end

We are working to improve month-end processing time for Sales Orders We use SAPKKA12 to set CLSD status on line items
SAP Help states: be sure that the status CLSD (closed) is set for all sales document items that you do not want to include in the period-end closing process. The sales document items with the status CLSD are then not selected for processing in the period-end closing process. Use report program SAPKKA12 to set the status.
This use to work (in 4.0). I have been on other projects and just brought back to this after several years (now in 5.0). Testing today shows that orders with CLSD status are being selected for month-end process.
Any ideas why this is so? System is selceting over 300,000 orders when well over half of them are set to CLSD. I do get a message that the order is not relevant to processing, but selecting the order and logging the message take time. and the logs are VERY long.
thanks

Does any one else have this issue that Sales documents with status CLSD are selected by RA (KKAK)?
In just one of our jobs, i get this Basic List
Perform actual results analysis      31273
Not relevant                                                 103894
Error                                                        2306
Objects Selected                                    137,473
75% of the orders are CLSD. and the system is still counting them. (we do not out put information messages)
I do understand that the orders are not analyzed, but all documentaion states that CLSD status is not selected, and in our 5.0 system, they are selected. In our 4.0 system, they were not selected.
Does this truely work for anyone in a 5.0 system?
Thanks
Althea

I updated to ios 5.1, after updating, now my screen is stuck with the apple logo and status bar and isn't doing anything....HELP

I updated to ios 5.1, after updating, now my screen is stuck with the apple logo and status bar and isn't doing anything....HELP

The typical fix if the progress bar totally freezes - meaning no movement at all for more than 20 minutes - and iTunes will no recognize the device - is to try to put the iPad into recovery mode. That is explained here.
iPad: Unable to update or restore
However, don't jump the gun. Keep an eye on the progress bar and if it is moving at all - even very slowly - let it go for a while. I'm updating my iPod touch first and the progress bar is moving but very slowly.

HT4910 Hi, i have an iPad4 and for the last two days it has been stuck with the iCloud Backup pop up. I cant click on OK or turn it off. It has been connected to a wifi network and left locked and plugged in all day. Any one got any ideas please?

Hi, i have an iPad4 and for the last two days it has been stuck with the iCloud Backup pop up. I cant click on OK or turn it off. It has been connected to a wifi network and left locked and plugged in all day. Any one got any ideas please?

Reset it by holding the power and home buttons at the same time until you see the Apple logo, then release.

I accidently downloaded something that made my webcam flash on spuradically even once i deleted it. when i restarted my computer it got stuck at the white loading screen with the grey apple and wont go past there..what is wrong? will applecare cover this?

i accidently downloaded something that made my webcam flash on spuradically even once i deleted it. when i restarted my computer it got stuck at the white loading screen with the grey apple and wont go past there..what is wrong? will applecare cover this? my computer also slowed down drastically before it stopped working..thanks! HELP PLEASE!

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
a. Boot into the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
If you've booted from an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
Step 3
Boot in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 5.
If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 4
Sometimes a boot failure can be resolved by resetting the NVRAM.
Step 5
Launch Disk Utility in Recovery mode (see Step 1.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then reboot as usual.
Step 6
Reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 7
Repeat Step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a Time Machine or other backup.
Step 8
This step applies only to older Macs (not current models) that have a logic-board ("PRAM") battery. Both desktop and portable Macs used to have such a battery. The logic-board battery is separate from the main battery of a portable. A dead logic-board battery can cause a gray screen at boot. Typically the boot failure will be preceded by loss of the startup disk and system clock settings. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 9
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store to have the machine tested. If you can't get to an Apple Store, go to another authorized service provider.

Plssss help i beg all of u after hard reset my iphone got stuck with an apple symbol i thought it will get on and now the battery got empty and pressing power on button it switch on showing red battery and gets off and also its not connecting to my l

Re: plssss help i beg all of u after hard reset my iphone got stuck with an apple symbol i thought it will get on and now the battery got empty and pressing power on button it switch on showing red battery and gets off and also its not connecting to my la
its not connecting y?i think its software got corrupted,i think i should charge it first with a battery charger and when apple logo appears i should connect with pc,but i dont know how 2 open the back cover and how 2 remove the battery,i phone battery is removable or not?i mean it is fiz or wot?

Recharge. Reset. Restore.

My iPhone 4S got stuck on the apple logo with the progress bar!

Afternoon. My iPhone 4S got stuck on the apple logo with the progress bar! but every time after I restore the 4S the progress bar starts again and stops at different stages of the loading process! Can anyone help with this please?
All this started happening after I tried to download the lastest update (iOS 7.1). The 4S went and got stuck on the apple logo and progress bar!!

Hello kuukua.b,
Thanks for using Apple Support Communities.
Please try to restart and reset your iPhone by following the steps below, and then resume your restore process.
Turn your iOS device off and on (restart) and reset
http://support.apple.com/kb/ht1430
Take care,
Alex H.

I got an error message when updating my phone and now its stuck with the apple on the screen it wont turn off HELP!

my i phone 4 is stuck with the apple logo on the front screen. i tried turning off but its frozen. this happened when i was doing the most current up date and an error message popped up. please help.
Laci

1. Try forcing reboot by holding down the home button and power/sleep button at the same time until the screen restarts.
-- IF THAT FAILS --
Let the phone battery drain.

Dear all, I have a MacBook Pro bought in April 2011. Last April, it got stuck while the wheel was spinning and I had to force it shut. That cost me my hard drive. Now, it's stuck again. I tried esc, cmd tab, moving the trackpad on the apple, but no. HELP!

Dear all, I have a MacBook Pro bought in April 2011. Last April, it got stuck while the wheel was spinning and I had to force it shut. That cost me my hard drive. Now, it's stuck again. I tried esc, cmd+tab, moving the trackpad on the apple, but no. HELP!

Dear John,
thank you for your prompt reply. After I sent the email, I left the wheel spinning to see if it would eventually stop. It didn't, but after a while the screen turned blue, so I decided to switch everything off with a forced shut-down. I could not restart with the OS DVDs because I am currently away from home, but fortunately everything was more or less fine after restarting. It then got stuck again, I forced it shut again, restarted again, and now it seem to work but I won't overdo it and will switch off smoothly after writing this (unless it gets stuck again). Last April I have replaced the HD, so it's now just under 6 months old. And, of course, since the crash occurred when I was abroad and had backed up just before I left, I have lost only a few days' work. Still, and I know this will make me hugely unpopular here, with my 5 previous laptops running on MS Windows I never had a problem. Which does not mean I loved the OS, or I would not have switched to Mac.
Anyway, and this is the main reason for this message, thank you very much again for your speedy intervention.
Claudia

I'm trying to update my daughter's Ipad2 to the new IOS 8 and it's got stuck on the connect to ITunes display. We don't have a computer to connect it to and it's never been connected to one. How do I get past this?

I'm trying to update my daughter's Ipad2 to the new IOS 8 and it's got stuck on the connect to ITunes display. We don't have a computer to connect it to and it's never been connected to one. How do I get past this?

You can try a soft-reset of pressing and holding both the home and sleep buttons for 10 to 15 seconds so that it reboots, but you are likely to get the same screen. If it does then it will need to be connected to a computer's iTunes so that it can be reset back to factory defaults - do you have a friend with a computer with iTunes installed on it, or is there an Apple store nearby that you could try going to (if there is then preferably make a Genius Bar appointment at it, or don't go at a busy time) ?
Has she been backing up to the cloud ? If she has then she should be able to restore to that. If not then what she can redownload for free from the stores will show in the Purchased tabs in the store apps.

Item got stuck with the status of "Ready to Release"

Similar Messages

Maybe you are looking for