Item In the invoice is comming as Statistical  Without any reason.

Hi Experts,
When i am doing my billing one of my item is comming as statistical(vbrp-kowrr eq 'X'), i don't for what reasons it is comming as statistical.
I checked the oder for that particular item and found that in the condition records  the value is maintianed as statistical i dont know how it get updated as statistical.I checked the item category also and there no flag set for statistical value i also checked for reasons for rejection and there were no reasons for rejection.
I also checked for the changes for the item and found that the item credit price,qunatity and the confirmed quantity was changed.
I dont know how it happened.
Kindly advice.
Thanks Regards,
Sandipan Jena
Edited by: sandipan jena on Nov 18, 2011 8:29 AM

Hi sandipan jena, 
As per the suggestion given by JP just check in item category in VOV7
--Select your condition type & check the statistical value
X Values cannot be used Statistically
Y Values can be used statistically.
--Remove the value & keep it blank.
--For this reason you are getting all the values as statistical.
Let me know if your problem is solved
Regards
Pradeep

Similar Messages

  • Finder not working, when click the infinity sigh comes, can't open any file

    finder not working, when click the infinity sigh comes, can't open any file?

    That could be an indication your drive is failing. If you do not have a current Backup, that is top priority.

  • I am trying to connect to my friend's wifi, i have a very strong signal indicated on my ipad, but cannot connect to the internet.  Yesterday i connected without any problem, can anybody tell me why i cannot connect today?

    i am trying to connect to my friend's wifi, i have a very strong signal indicated on my ipad, but cannot connect to the internet.  Yesterday i connected without any problem, can anybody tell me why i cannot connect today?

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    iOS 6 Wifi Problems/Fixes
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    How to Boost Your Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
    Troubleshooting a Weak Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    Wi-Fi or Bluetooth settings grayed out or dim
    http://support.apple.com/kb/TS1559
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Publishing of the translation for an Iview fails without any notice

    We face the followoing problem with an custom IView in SAP portal:
    The publishing of the translation for an Iview fails without any notice it only works directly after the IView was deployed.
    The translation is done by first generating the translation data then translating to the several languages, marking the data as translated. After that the translation is published via the Translation Worklist Coordination.
    All is done in the Portal under Contenet-Administration->Portal Content Translation, Translation Worklist Coordination and Worklist Translation
    The publishing works directly after deployment of an iView but if one tries to retranslate the translation is saved in the repository but not published. If we delete the translation Worklist and start over again the translations that are not published are still in the generated data but still we can’t publish them.
    There is no Information that the publication failed or anything. In the Worklist it just goes back to normal state where we can again generate the translation data.
    The Iview is a Java IView for the translation a properties file was created and all the words from properties file show up in the generated data from the Worklist.
    We could deploy the Iview every time the translation needs to be changed but the customer wants to do the translation without that step.
    We use the following Versions:
    Sap Portal nw2004s
    sap.com/SAP-JEECOR 7.00 SP10 (1000.7.00.10.0.20061026144500) 20070119122211
    sap.com/SAP-JEE 7.00 SP10 (1000.7.00.10.0.20061026144500) 20070119121940
    Thanks 4 Help

    Please review the terms of your Comcast agreement. Many agreements include scheduled price increases, and typically state that prices will return to the prevailing (almost always higher) rates when the agreement expires.
    If you still have questions contact one of their Billing reps at the phone number on your bill or 1-800-Comcast, chat with them using one of the "Account and Bill" options at https://www.comcastsupport.com/chatentry/, or visit a Service Center if one is nearby (check locations and hours at http://customer.xfinity.com/service-center-locations).
    Comcast sometimes responds to questions here in the forums, and sometimes they do not. When they do the typical response time is somewhere between a few hours and a few days.

  • Satellite L300-17L is putting itself on stand by all the time without any reason

    Hello Eldorado,
    i am sorry that this is not a question in connection to the topic, but i have L300 - 17L laptop and from time to time it is shutting down (more specifically putting it self on stand by) without any reason.
    It is not the cooler or anything else..
    The battery is full, and that is happening while i am writing or working on the laptop generally!
    The local service says that is nothing wrong with the laptop, i am so nervous, i cannot work , it is interrupting my work ..
    PLEASE HELP ME! thank you

    Hi
    So what happens exactly?
    Does the notebook shuts down or goes into standby mode?
    You said it happens from time to time this means that it would not be easy to replicated this issue and I think the technician was not able to replicate this is it right?
    What applications are running if this happens?
    Did you try to restore the notebook back to factory settings using the HDD recovery or Recovery disk? Do this!
    Check also if your BIOS is up to date!

  • "The document could not be printed" without an reason!?

    Hi all,
    cant Print PDF Flattening *80% then get message from reader  "The document could not be printed" without an reason!
    Document was an PowerPoint and the PDF was created with FreePDF 4.02 and watermarked with PDF4Net.
    How can I find out what is the problem?
    Thanks
    Robert

    The default printer is set, the page setup had a printer selected; these did not change the error result. All printers were removed using the Mac OS X printer system reset and added them back. The Adobe "Repair Acrobat Installation" was also used after adding the printers. None of these changed the error result. There is no printer spool created, just the Acrobat pop up error window with "The document could not be printed."

  • "New in iTunes" newsletter contents received in iPad email will not produce sound.  Any ideas as to why?  If I go into the iTunes program, I get sound without any problem.

    "New in iTunes" newsletter contents received in iPad email will not produce sound for music samples.  Any ideas as to why?  If I go into the iTunes program, I get sound without any problem.

    Amazing! I'm a dance instructor and am doing the exact same thing as you - and not seeing what I need on my iPad Air ... I can't believe there has been no reply on this! I also can't believe there isn't an easy way of seeing track info in the iPad or iPhone but I've spent hours searching and am not finding anything

  • My iphone 4 currently at ios 7.1.. suddenly my iPhone entered into recovery mode without any reasons.. i tried using iTunes restore the iPhone.. after the process finished... I still stuck at recovery mode. any idea?

    currently at ios 7.1.. suddenly my iPhone entered into recovery mode without any reasons.. i tried using iTunes restore the iPhone.. after the process finished... I still stuck at recovery mode. any idea?

    i have tried to restore via itunes as i would have usually, half way through i get an error code 3194 pop up.....and yes i do back up.
    Thanks for your help but i've already tried this a couple of times.

  • I can call or receive a call for 40 sec or 1 minute, then the call is interrupted without any reason. Any idea why?

    I can call or receive a call for 40 sec or 1 minute, then the call is interrupted without any reason. Any idea why?

    or reset your phone by holding down home button and power off/on until the apple logo apprears.

  • Sometimes, when we open the multiple pdf files, menu bar is disappearing without any reason.

    Sometimes, when we open the multiple pdf files, menu bar is disappearing without any reason.

    Hi pramodg23752205,
    Okay, so are you facing this issue with all the machines or with a particular machine?
    Does 'F9' key resolves the issue?
    Regards,
    Rahul

  • Q hello good morning would help me with something last night started to charge my iPhone and when it was fully charged the night off and the battery was consumed alone and without any battery dawned

    hello good morning would help me with something last night started to charge my iPhone and when it was fully charged the night off and the battery was consumed alone and without any battery dawned

    Hi, had the same problem with my ipad.
    First of all I would suggest to close all apps which might be opened (maybe one is working without that you know).
    To close the apps press twice in a row the home button and keep a finger on the first app which appesars on the lower band until the entire row starts moving. then press the red MINUS on all oyur apps in order to close them all.
    Then switch on and off your phone and see whether the battery is still draining.
    if this continues try to keep you phone on a flight modus to see if this is due to internet connection.
    maybe you should review some of your settings, as notifications, bluetooth, push services etc. (see specific topics on how to save battery).
    If you still have not solved your problem try to restart you phone as a new one (after that you can re-download all your apps). 8do this by using itunes)
    remind to save your data (e.g. pictures) prior to this operation.

  • Three or four times a day the radio module in my iphone doesn't responding. Sometimes it happened during a phone conversation, sometimes without any reason during a day.

    I have a problem. I use my iphone4 during one year. I bought it with firmware 4.0.2. Three or four times a day the radio module wasn't responding. Sometimes it happened during a phone conversation, sometimes without any reason during a day. Just I was out of connection for incoming calls. But it happened without any warnings on my iphone. After I have upgraded firmware to 4.1, this problem disappeared (baseband 2.10.04). But a week ago I upgraded firmware to 4.3.3 and my problem appeared again (4.10.01). I changed SIM-card, but it didn't help. How can solve this problem? I want to downgrade baseband to 2.10.04. Are there another solutions?

        Hi ZachBrunelle!
    I'm saddened that your having trouble with your device and you efforts are  greatly appreciated, let's get to the bottom of this! You mentioned your device not having any physical damage, has it been exposed to anytime of water/moisture?

  • The i phone shut down coming off alone without any reason

    Dear Sir:
    please i need your help , as my IPHONE 4 is coming off and shut down alone, without any reason.
    and i cant put it ON again dont know why please help me.
    wishing for all good day.

    Try to resore it to latest version of iOS 7.0.4
    http://support.apple.com/kb/ht1414
    If it does not help got to APPLE.

  • Batch item in the invoice

    Hi Experts,
    How should I configure the system in the below case:
    Batch split i carried for the delivery item. When the billing doc is created I have positions like this:
    Item:        Quantity         POS. type
    20             10                  TAN
    21              0                   ZTAN
    I think that it would be more "elegance" if only TAN position will be on the invoice. But If I delete a copy control for the Batch split position type (ZTAN), the upper position from the batch split gets a quantity value '0'.
    Any ideas how to solve this?
    Thanks in advance!

    Hi Michal,
    If I understood your Issue right, You need the Invoice to show the Cumilative of all the batches for a Item on one line.
    for this:
    1. Goto copy controls for billing documents  > Delivery document to billing document .
    2. Select your source delivery doc. type & target billing doc. type. & click on "Item"
    3. Double click on Item Category TAN.
    4. Here, for the "Billing Quantity" , Select "G"
        (This will copy Qumilative Batch Qty minus the invoiced Qty).
    Hope this will resolve your issue.
    Regards,
    Vijaya Kiran

  • I am trying to download the update to Photo Effects (Lite) v 3.0.0, for several weeks now without success. I press the update button and it goes away, then comes back again without any change. Can someone help please?

    The update to Photo Effects (Lite) v 3.0.0 won't work. I've tried for several weeks without any result. I press the download button and it disappears, then reappears again. Can any one help, please?

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Select
              /var/log ▹ appstore.log
    from the hierarchical list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar.
    Each message in the log begins with the date and time when it was entered. Select the messages from the last installation or update attempt, starting from the time when you initiated it. If you're not sure when that was, click the Clear Display button in the toolbar of the Console window and then try the installation again.
    Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
    If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
    ☞ The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    ☞ Some private information, such as your name, may appear in the log. Anonymize before posting.

Maybe you are looking for