Item line deltion on multi items PO will not work

We have recently patched up our SRM to stack 10, we can no longer delete a item line on a multilple line order.
Single line orders all work ok, we are using SRM 550 and srm_server is at level 9
Any ideas?
Just as a footnote this only applies to Service items, for goods it is ok?
I have checked SLG1 and no errors there, also in RZ20 none there either. But the order on SRM is error in process
Edited by: Steve Cane on Dec 21, 2007 2:58 PM

Did you try with the little checkbox at the top of line items. On clicking this, the screen refreshes. Then try selecting the line item and deleting it.

Similar Messages

  • Web address with hyphen will not work in PDF

    CS 4; ID 6.0.6
    OSX 10.5.8
    In ID, I create web links by selecting a url and then selecting New Hyperlink From URL. The new link is a Shared Destination by default with the web address as was selected. These links work fine when exported to PDF.
    When I use the same process on a url with a hyphen (part of the address and not a line break), the resulting Shared link will not work when exported to PDF. The newly created link in this case always begins with file:///Users/.
    What is it about the hypen that messes up the process? I work in a bilingual government so we have a lot of urls with hyphens in them. For example: www.cga-nb.org.
    Thanks.

    SWSinNC wrote:
    I will, thanks
    so your saying that if it's fake...that specific function is a common flaw ?
    Exactly!
    Unfortunately the full thread recounting this saga got lost in the forum changeover, but the fake copies come in authentic looking shrink-wrapped boxes with printed documentation; and everything works except the nudge.
    Or sometimes other keyboard combinations.

  • Ipod 7th generation not recognized by windows 8?  it worked before, but now when we reconnect to sync more items, it will not recognize, nor does it show up as a device on the computer.

    ipod 7th generation not recognized by windows 8?  it worked before, but now when we reconnect to sync more items, it will not recognize, nor does it show up as a device on the computer.  help?

    Hi stitchinstar!
    I have an article for you that will help  you troubleshoot this issue with your iPod and iTunes:
    iPod not recognized in My Computer and in iTunes for Windows
    http://support.apple.com/kb/ts1369
    Thanks for using the Apple Support Communities!
    Cheers,
    Braden

  • HT1386 i have albums that will not sync now. I have only owned my ipod for 5 mo and it appeared to sync fine. Now it say that the process is complete but there are 3 items that will not sync to my ipod. I i just purchased from the store!!

    i have albums that will not sync now. I have only owned my ipod for 5 mo and it appeared to sync fine. Now it say that the process is complete but there are 3 items that will not sync to my ipod. I i just purchased from the store!! please help! thanks maggibnd

    Do they play in iTunes?
    Can you directly redownload them by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • When I click and drag items they will not release. How do I fix this?

    When I click and drag items they will not release. How do I fix this?

    If third-party software called "Air Display" is installed, remove it according to the developer's instructions, then reboot. Back up all data before making any changes.

  • HT2204 Itunes password will not work when I purchase items after reseting passwords

    Have used Itunes for years with no incident.  Now, every time I try to purchase a song, book, app...it prompts me for my username and password.  Despite knowing it....it will not work. I've logged out / logged back in several times no luck.  I've updated my password successfully.  But again, each time I try to purchase something, I type in my username / password and it says that it is not correct.  ***.  Have recently even updated Itunes to make sure everything there is up to date.  Is there some virus that could be involved here.  HELP!!

    iOS: Troubleshooting Messages
    FaceTime, Game Center, Messages: Troubleshooting sign in issues
    - Reset all settings                            
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes      
    - Restore to factory settings/new iOS device.                       
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar                                                              

  • Add shopping cart item functionality is not working in PO

    Hi Experts,
    I found that Add shopping cart item functionality is not working in Purchase order.
    We are raising the Purchase order in SRM and i am trying to use the Add shopping cart item functionality to add the shopping carts line item in to purchase order.
    Once I will click on start search, it will give me a list of Approved shopping cat and when I am trying to add any shopping cart in PO line item, nothing is happening and  It is not allowing me to add the shopping cart line items in to this PO and also there is no error message.
    Please suggest us how i can fix this issue.
    Thanks in advance.

    HI,
    If the shopping cart's have same vendor and company code, then only we can club the shopping carts
    in to single PO.
    Please go throught it
    http://help.sap.com/saphelp_srm40/helpdata/en/38/4cc5376848616ae10000009b38f889/frameset.htm

  • I am trying to set an open DNS using the MacAir. But when I tried to flush the existing one at utilities/terminal, it will not work.  I am using Yosemite.  May I know what should be the command line so that I can shift to an open DNS?  Thanks

    I am trying to set an open DNS using the MacAir. But when I tried to flush the existing one at utilities/terminal, it will not work.  I am using Yosemite.  May I know what should be the command line so that I can shift to an open DNS?  Thanks

    >SystemPreferences>Network>DNS

  • Item level security not working when placed in a portlet page

    I have three page links linking to separate pages and have two of them with item level security turned on for specific groups with view privilges. I have the access for those groups with view privilges in the page level as well. I have published that as portlet and placed the portlet in another page which has view priviliges for the groups specified in item level as well.
    But I notice that when i place the portlet in a page, the item level security is not working.
    Item Level Security Not Working for Items Placed on a page and published as portlet and placed in another page. Is there some work around for this.
    Thanks
    Valli

    Would you please clarify for me? Is the problem that unauthorized people can see the portlet, or that unauthorized people can see the links?

  • Cs6 help update will not work  sais server is off line or down

    tried  reseting my seting on my adapter but it still will not work.  also tried diabling firewall still no go can some one help me with this please?

    thanks for the reply, I just tried turning off my antivirus program and added CS5 to my allowed programs in my firewall settings with no luck. i will have to contact my service provider to see if they may somehow be blocking CS5. 
    the strange thing is that all my other programs including Adobe Lightroom 3 can access and run their update programs using my current settings.
    thanks for giving me a starting point to figure this out.
    Mike

  • I just upgraded to OS 10.8.4 last night and my Office 2011 programs will not work.

    I just upgraded my MacBook Pro (early 2011) to OS 10.8.4 last night and my Office for Mac 2011 programs will not work. To test in safe mode, I shut down my computer, restarted in safe mode to see if I could open any of my word or excel documents, which I was able to do.  I restarted, and tried opening an office document (word and excel), which did not work.  Does anyone have a solution to this?  I cannot revert back to OS 10.8.3 because I did not use Time Machine.  Any help will be appreciated.

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac. 
    These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing. 
    Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects. 
    Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it. The headings “Step 1” and so on are not part of the commands. 
    Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply. 
    Launch the Terminal application in any of the following ways: 
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.) 
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens. 
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid. 
    When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign. 
    Step 1 
    Triple-click the line of text below to select it:
    kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}' | open -f -a TextEdit 
    Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). A TextEdit window will open. Post the contents of that window, if any — the text, please, not a screenshot. You can then close the TextEdit window. The title of the window doesn't matter, and you don't need to post that. No typing is involved in this step.
    Step 2 
    Repeat with this line:
    { sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|org\.(amav|apac|cups|isc|ntp|postf|x)/{print $3}'; sudo defaults read com.apple.loginwindow LoginHook; } | open -f -a TextEdit 
    This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator. 
    Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step. 
    Step 3
    launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)/{print $3}' | open -f -a TextEdit 
    Step 4
    ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null | open -f -a TextEdit  
    Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting. 
    Step 5
    osascript -e 'tell application "System Events" to get name of every login item' | open -f -a TextEdit 
    Remember, steps 1-5 are all copy-and-paste — no typing, except your password. Also remember to post the output. 
    You can then quit Terminal.

  • SOURCE MONITOR Will not work

    I now have a new problem.
    At first I was not getting sound in the source monitor, I still have that problem but now I find that after I have used the source monitor once the next clip or still I try to load into the source monitor I get nothing or a white screen.
    This only started after I up graded to 5.5. It happens in HD or HDV or SD resolutions.
    Anyone have an idea what is going on?
    Thanks
    Dennis

    What kind of files are you editing, and does your project match so there is no red line over the timeline?
    Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037
    What is a CODEC... a Primer http://forums.adobe.com/thread/546811
    What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037
    Report back with the codec details of your file, use the programs below... a screen shot works well to SHOW people what you are doing
    For PC http://www.headbands.com/gspot/ or http://mediainfo.sourceforge.net/en
    For Mac http://mediainspector.massanti.com/
    http://blogs.adobe.com/premiereprotraining/2011/02/red-yellow-and-green-render-bars.html
    If you have a red line over the timeline after importing a video and before adding any effects... your project is wrong for your video... read above about codecs
    Once you know exactly what it is you are editing, report back with that information... and your project setting, and if there is a red line above the video in the timeline, which indicates a mismatch between video and project
    H.264 will NOT work inside an AVI wrapper http://forums.adobe.com/thread/854115
    More information needed for someone to help... click these links and provided the requested information
    -http://forums.adobe.com/message/4200840
    -http://forums.adobe.com/thread/416679
    For CS5 and later, the easy way to insure that your video and your project match
    See 2nd post for picture of NEW ITEM process http://forums.adobe.com/thread/872666

  • Perifials will not work with Windows 7

    I have a new HP h8 1214 PC WiFi with Windows 7 installed.  My old HP ScanJet 4850 and my HP Personal Media Driove 1600 will not install. My previous operating system was XP. 
    I would like to install the ScanJet 4850 because it can send slides and film strips to my computer to be used in a slide show with Adobe Photoshop Elements and  Adobe Premiere. I have started a slide show of these items and did not get all of the slides transferred before my old computer conked out.
    I would like to use my Personal Media Drive for backup and it also has pictures I would like to be able to obtain.
    I don't know if perifials that are not WiFi will install on a WiFi computer.  Apparently not!
    Any help will be greatly appreciated,
    flyingjewel

    The reason the CD will not work is evident. The CD is for Windows 98,  XP Home or XP Professional.
    The WIN 7 64bit downloaded driver file is what you need. Download and install the driver.
    Here is a link  ( see pg 5 and 11) that discussed the power supply for a PMD drive, your's may vary. But you must have a power supply (modular plug with cord), or brick/adapter (has AC cord into power supply, then another cord that supplies DC).
    I am a volunteer. I am not an HP employee.
    To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
    The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
    (2) HP DV7t i7 3160QM 2.3Ghz 8GB
    HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
    Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
    Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
    Both Customs use Rosewill Blackhawk case.
    Printer -- HP OfficeJet Pro 8600 Plus

  • I have purchased app- Blackjack Pro by G3 Studios.  It will not work.  It comes up and then immediately quits.  I called Apple Support  They said to delete.  OK I deleted and took check mark off the computer I tunes screen.  I  tried to re-purchase, but i

    I have purchased Black Jack Pro - G 3 Studios.  It will not work.  It come up but immediately flips off.  I called apple Support and they said delete it and re-down load.  I have tried that many times.  When I go to App store and try to re-download - it comes up "Downloaded" - as in you alreadly have purchased it.  Always before on other Apps, I just delete and repurchase and when it comes up OK.  But this one comes up "Downloaded", so it will not let me repurchase it.
    It still does not work- How do I get it to work?

    Hi Ken,
    Wow, I've logged into adobe and never seen your response until now.
    I need to make the forums more of a daily stop I guess.
    Thank you for your response, When I go to the Archives, it states I have none. In addition, previously when I'd tried to move items to the archive, they just disappeared  
    Currently my desktop is not connecting at all, Everytime I connect, it's states "We have now logged you out" and requests I login again.
    I have of course rebooted,
    Gone into taskmanager, killed all the relevant threads,  tried again to login through the desktop, no luck, I'll have to uninstall it, make sure the threads are killed, then reboot it and then reinstall it, but I've not had the time to do that.
    On another note, and just as a point of reference, myself, personally, I hate these "cloud" file repositories (not to be confused with adobe cloud services which I love) but the file repositories themselves imho, are a blackhole of resource usage when one doesn't/isn't using them,
    Is there a way we can use it more of a "ftp" sort of thing, when I want to I can  put files there?  There is no way to "Download" the repository, no way to download the folders.. only individual files and then it takes I think three different steps before the download starts.. I find this very inhibiting.  Just an fyi. for what it's worth.
    Please, feel free to contact me,
    I'm on g+ chat [email protected]

  • I  have been having nothing but trouble with OS 10.6.8.  Many of my appliatins will not work..  HOw can I revert back to a previous version of OS x?

    I  have been having nothing but trouble with OS 10.6.8.  Many of my applications will not work..  HOw can I revert back to a previous version of OS x?

    Before you revert anything try this:
    Reinstall OS X without erasing the drive
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.
    Next time don't post something like "nothing but trouble." Tell us exactly what the trouble is and provide any additional information such as error messages.

Maybe you are looking for