Item Message text LTxt 2A Message(s) when structuring line items for

Hi ,
Please can any body help on this below errror message.
At the time of executing depreciation (AFAB) we are getting below error message.
Item     Message text     LTxt
      2A     Message(s) when structuring line items for document number ERROR00001
      2A     Account 'Accumulated dep. account unpl. deprec.' could not be found for area 01
END     Error messages after processing of assets
END     Posting run ended with errors
Please can any body help on this issue.
Thanks in advance for your help.
Edited by: seshu_sapfico on Nov 2, 2009 5:12 PM

Hi Seshu
Please go to T-code AO90 and assign an accumulated depreciation account .
To find the correct place , check your asset class and check which account determination you have in it.
Once you know your account determination go to T-code AO90
enter chart of depreciation
double click on account determination on left hand side of screen
click on correct account determination on right hand side
double click on depreciation a/c on left hand side
and enter your g/l for Acc.dep. accnt.for ordinary depreciation
hope this should solve your problem
Thanks and regards
Sanjeev

Similar Messages

My iphone dosen't doesn't make key tone sounds anymore when I write a text message or when I want to dial a phone number I don't know how to fix this problem, I don't hear the clicking noise anymore does anyone know how to fix this problem?

My iphone dosen't doesn't make key tone sounds anymore when I write a text message or when I want to dial a phone number I don't know how to fix this problem, I don't hear the clicking noise anymore does anyone know how to fix this problem?And all the sounds on my phone are on, even the keyboard clicks.

Try restarting your iPhone by holding down the on/off and the home buttons at the same time until you see the Apple logo, double check the volume button just in case. If you still can't hear the tones go into your settings>sounds and make sure the options are on.

My daughter recently broke her iphone 4. We had a spare so we exchanged SIM card. Now that we are linked in the cloud, I am getting all of her text messages and when I text her i get a text from my number. What should i try next?

My daughter recently broke her iphone 4. We had a spare so we exchanged SIM card. Now that we are linked in the cloud, I am getting all of her text messages and when I text her i get a text from my number. What should i try next?

stop using the same Apple ID for iMessage on both phones

Message no. KE0C133 when enter line item (ke21n)

Hi All,
        When I enter one line item using transaciton code "ke21n", the error: "Characteristic value 1000001 does not exist for characteristic PRCTR(Profit Center)" occurs. but the profit center "1000001" for the controlling area exists. and the operating concern defined in the SAP Banking PA. and the Component version is ECC 6.0, and the same error message occurs when I create the financial object using transaction code "JBDO".
        anybody meet the same question? Thanks very much.
Edited by: Gavin on Jan 8, 2010 4:32 PM

Item category determination is working fine. Now i am getting this error while creating billing document with reference to delivery document.
6000054192 000020 Please check Customizing for cross-company
Diagnosis
The system checks whether this is a cross-company
situation, which means that it checks whether two different
company codes exist and whether billing status has been set
to intercompany billing.
Procedure
    Check in Customizing under Sales and Distribution->
    Billing-> Intercompany billing to make sure all necessary
    settings have been made.
But actually this is not cross company transaction. Please help me in this regard

I need to copy and paste as I am loading content onto my website through an online user panel, I dont have the know how to start re-writing coding as the help message stated when I try to copy some text, is there a simple solution to this task?

I really need to copy and paste as I am uploading content onto my website through an online user panel, I dont have the know how to start re-writing coding as the help message stated when I try to copy some text, is there a simple solution to this everyday type task? Thanks in advance. Mark in Cheshire.

kaymarhar wrote:
Because it took me AGES to manually configure the text to wrap around my little pig friend there and I would be so bummed if I had to do it again
Next time, you can use the Text Wrap function, so you don't need to manually wrap the text.

Why do my text messages quit when I try to create a new message?

Why do my text messages quit when I try to create a new message?

Don't know. But have you tried the basic troubleshooting steps recommended in the User Guide? What exactly HAVE you done to troubleshoot your issue?

I can't receive text messages (sms) when imessage is turned on

I can't receive text messages (sms) when imessage is turned on.
i only receive sms when i turn imessage off, this just started yesterday after i switched from my 5s to the iphone 6.
this is very frustrating

Hi shineshinebobo,
Thanks for the question. Based on what you stated, it seems like you are not receiving sms messages. I would recommend that you read this article, it may be able to help you isolate or resolve the issue.
iOS: Troubleshooting Messages - Apple Support
If you can't send and receive SMS
You will need these to send and receive SMS:
An iPhone
A strong cellular network connection through a cellular network provider
A domestic SMS plan from your cellular provider (You might need an international messaging plan to send SMS to an international contact. Contact your carrier for more information)
A roaming SMS plan when you use a cellular provider's network that is different from your billing cellular provider's network (Learn more about roaming and contact your carrier for more information.)
To resolve issues sending and receiving SMS, follow these steps
Go to Settings and turn airplane mode off.
Make sure that you have a cellular network signal in the status bar of your iPhone. If there's no signal, learn more about troubleshooting no service.
Restart your iPhone.
Tap Settings > General > Reset > Reset Network Settings on your iPhone.
Remove your SIM card and insert it again.
If you still can't send or receive SMS, follow these steps
Make sure that the contact who's trying to message you isn't blocked in Settings > Messages > Blocked.
Make sure that you're using the area code with the contact's phone number. When sending messages internationally, you also need to use the contact's international code.
If you're using a "Pay as you go" SMS plan, make sure it has enough available balance. Contact your carrier if you're unsure of your SMS plan or the available balance.
If the issue occurs with a specific contact or contacts, back up or forward important messages and delete your current messaging threads with the contact. Create a new message to the contact and try again.
If the issue occurs with a specific contact or contacts, delete and recreate the contact from the Contacts app. Send a new message to the contact.
Back up and restore your iPhone as new.
If your carrier has recently ported your phone number, the porting process might not be complete. Contact your carrier to confirm that the porting process is complete.
Contact your carrier to confirm that you're provisioned for sending SMS and are in an area with cellular coverage.
Contact your carrier to verify there are no blocks or filters placed on your wireless account preventing you from sending SMS.
Thanks for using Apple Support Communities.
Cheers,
Mario

I have an phone 4s from cricket and when i text non iphone users such as android or and other phone brand they receive my text message but when they reply i wont get there message. send imessages is working its just my text message that is not working.

i have an phone 4s from cricket and when i text non iphone users such as android or and other phone brand they receive my text message but when they reply i wont get there message. send imessages is working its just my text message that is not working.

You use Restore to get the latest firmware build, not the Update button. You can only use the Update button, if there is an iOS update, say iOS 5.1.
this link talks about updating to 9A406 to fix the "No Service" issue with iPhone 4S:
http://iphone-and-i.blogspot.com/2011/12/fixing-iphone-4s-signal-problem.html

HT201269 I recently switched from 4S to Galaxy S4. I am not getting texts from iphone senders. When the message is sent it goes as a imessage. How do I fix this??

I recently switched from 4S to Galaxy S4. I am not getting texts from iphone senders. When the message is sent it goes as a imessage. How do I fix this??

Turn off iMessage on the iPhone as should have been done prior to switching devices.
Settings > Messages > iMessage > OFF

I tried to text a photo from i phone 5 to a contact in i messaging. When the contact came up, a conversation string that had been deleted also came up...I've not see this before. Where might this conversation string be stored? Thank you

I tried to text a photo from i phone 5 to a contact in i messaging. When the contact came up, a conversation string that had been deleted also came up...I've not see this before. Where might this conversation string be stored? Thank you

I tried to text a photo from i phone 5 to a contact in i messaging. When the contact came up, a conversation string that had been deleted also came up...I've not see this before. Where might this conversation string be stored? Thank you

Email is not showing up - i can see there is text in my "preview", but when I open the email message, there is no text

My email is not showing up. I can see that there is text in the preview, but when I open the email, there is "to" and "from" and subject, but no text in the body of the email. ??

Try resetting your phone: hold the on/off and home buttons until you see the Apple logo (ignore the off slider that appears first), then release. You won't lose any data by doing this.

How to print item texts in po contract form when the fixed item status is N

Hi all,
I'm trying to print the item texts in the contract forms.
I need to print the item texts when the status is 'N' and at the same time the status is blank in the same form.
I tried using t165p.I'm unable to print the both the message status with N and blank at the same time.
Please guide in this regards.
Thanks and regards,
Krishna

Hi Luis,
Thanks yes, now it get captured soon after changed the item accordingly as you said.
so there is no need of creating hidden item for those item (i.e) &P1_DIS_COURSE_NAME. AND &P1_DIS_DATE.
right??
Regards,
Mini

Internal order - error message M7064 when trying to post GR in MIGO

Hi All,
When trying to post GR against an internal order in MIGO system gives error message M7064
"Document 000009000030 does not contain any selectable items"
I'm not familiar with CO orders. What shall I check and how? Could you please help?
In KO03:
Status of order: REL DLV GMPS SETC VCAL
Allowed transactions: I can see e.g. RMRU, RMWA, RMWE, RMWF
Isn't it possible hat somehow the status of the order controls it? But how?
Please help.
Thanks,
Csaba
Edited by: Csaba Szommer on Feb 3, 2010 4:21 PM

HI,
I'm not sure if you got a chance to look at the long text of the error message, which shows the possible reasons and procedure to follow. You may want to check if any of these reasons applicable in your case..
Diagnosis
The document or document item entered cannot be adopted.
Possible reasons for this are:
The document items have already been processed
(Suggest zero lines indicator set?).
the document items have been deleted or are blocked.
the document items have been created for a different plant.
(for reservations only) movements are not yet allowed for the reservation items.
(for reservations only) the document items are retrograde components of the order. These are posted using the order confirmations.
A confirmation must exist for the document items.
The document items must be released first.
The document is an R/2 document.
Procedure
Make sure your entries are correct.
If the system has already processed the total quantity, you can set the Suggest zero lines indicator. The system will suggest the quantity zero for the items that have already been processed.
If you have entered a particular item, cancel the item. If you do not enter an item, the system searches all of the open items in the document.
If the document is a purchase order, production order or a reservation, you can enter search criteria in the dialog box.
You access the dialog box by choosing Enter with reference on the initial screen.
If the document is an SAP R/2 document, you have to cancel it manually by entering the reversal movement type.
Hope this helps.

Get error message: "Element 'when' not found in 'xsl:choose'"

Thank you in advance for your help.
I got this error message:
Caused by: oracle.xdo.parser.v2.XMLParseException: Element 'when' not found in 'xsl:choose'.
When I put a form field with this help text:
<?CHOOSE:?><?WHEN:ELMT_CATEGORY_CODE='SS'?>
Did some research but cannot find why...
-Bill

Never mind, put the <?end choose?> in wrong position. Thanks

Messages icon indicates that there is an unopened message but when i go into it the message is blank and no option to delete it. Any ideas how i can get rid of this and stop it from opening up in the blank message each time i open my messages?

The message icon on my iphone indicates that there is an unopened text message, but when i go into it, it just opens up a blank message, and there is no option to delete it. Any suggestions how i can get rid of this message, and prevent my phone from always opening up in the blank message whenever i go into my messages, rather than just opening as my inbox?
Many thanks

Hard restart.. While the phone is powered in, hold the power and home button. Hold them down and keep them held down. the phone will eventually shut itself off and reopen. keep held down till you see the appl elogo, then release. This will not delete anything off your phone, it will just force all apps to stop their current process. If you just turn the phone on and off, it will just pick up where it left off. Good luck

Item Message text LTxt 2A Message(s) when structuring line items for

Similar Messages

Maybe you are looking for