Item not copied

HI
When i try to sales order with reference to a billing document some of the items are not copying meaage we got"Item 000010 is not copied from the reference document
Message no. V1 476".. we checked copy cotrols all are perfectly maintained, item cat TAN.
Pl advise.
Cio sankar

Yes we need to look into VTAF, Tag doc is RA Return w/ Auto Deliv, source is F2 source item cat is TAN target is REN.
Requirement used was 303-include LV45C303 for TAN, DataT1-153-include FV45C153.
PROBLEM IS IN THE SOURCE DOC WE HAVE 2 LINE ITEMS 10,20 BOTH ARE HAVING THE SAME DATA BUT DIFFERENT MATERIALS WITH SAME ITEM CAT TAN. While copying system copying only 10 but for 20 above message gets pop up. I tried to any diff in material master for the both items it looks like similar.
one more for a strnage eye, while copying when i goto selction list if i select 2nd item ( which its not copied earlier) system is taking without any messages.
Only problem is if i dont use any selction list-items.
I got one OSS 145553 related to the same problem but i am very much afraid to use the same, bcz problem is not persistent and its not same everytime..
any ideas pl...
as usual i always thankful to this FORUM for many CATS and GURUS..
Cio sankar

Similar Messages

Problem in Partial delivery BOM - items not copied in subsequent delivery

Hi,
We are using BOM in Sales order and we have activated delivery group for the BOM header item category.
When we create first delivery we change the BOM header item quantity in delivey ( all the components quantity change accordingly) and save the delivery.
Now when we try to create second delivery with reference to the same delivery for the left out qunatity in sales order, system is not copying the components of BOM items ( it is only copying BOM header) from sales order to delivery.
Please let us know how can we create subsequent delivery with reference to the same sales order and delivery should get all the BOM items from SO to delivery.
Please let me know if you need further information.
Thanks
Venkata Rama Reddy,K

Hi,
We already set the delivery group to A, and still having the same result. We change the BOM header quantity only and automatically the component quantity is updated.
This happens only if there are two header BOM in the Sales Order. See example below:
Bom Header 1 = 100
Bom Component 1a - 80 (partial delivered)
Bom Component 1b - 20 (partial delivered)
Bom Header 2 = 200
Bom Component 2a - 150
Bom Component 2b - 50
When creating outbound delivery, initially all the materials are copied to the outbound document. If we want to delivery only Bom Header 2, then we will delete the Bom Header 1 line item.
Upon deletion, the status of the component becomes fully delivered in the SO, but the Bom header is still partial delivered.
Please confirm how to correct this.
**If there is only one BOM Item in the order, then partial delivery is ok..
Thank you,

Line item not copied in SDF /KN when creating based on Return order

Hi,
Anybody , can help me?
I try to replace a damaged good returen by the customer,by doing the follwing actions.
1 Creat return order based on orginal oder.
2. Try to create SDF/KN based on Return oder, but line item is not copied.
How can solve this?
Regards
rajeev

Hi,
Check the copying control betwee these orders in VTLA, and check the item category is maintained in the copying control.
Prase

Sales Order and Sales Item not copy over to table AFPO-KDAUF and AFPO-KDPOS

Hi Expert,
May I know why I run MRP and convert planned order to production order based on Sales Order, why the sales order and sales item is not copied and save in table AFPO-KDAUF and AFPO-KDPOS?
I can see the sales order and sales item is appearing in MD04, but how is the linkage between production order and sales order/item?
Thanks.

Sales order No. and sales line item will only be transfer to production order in MTO ( Make to Order) scenario.
If your scenario is MTO and the sales order reference is not getting transfer, then check your requirement type and requirement class setting in T.Code OVZH and OVZG.
In standard SAP 'KE' requirement type 40 requirement class is used for MTO scenario.

Items not copied from PR to PO

Hi
thirdparty order was created for 5 different items, same PR was created for all the items. But when user tried to create PO from the given PR system copied only 4 materials and not copied the 5th lineitem.. any possible reasons?
Reg
Shan1242

Hi,
check 4 th item is release or not if u have release procedure at item level
shakir
Edited by: Shakir on Jan 28, 2008 10:02 PM

Items not copied but computer IS authorised. Help please.

Error message on synch always reads: "some of the items in the itunes library ...were not copied to iphone because you are not authorised fro them on this computer.
I jhave authorised the computer, repeatedly.
Any ideas how to solve this?
All I can think of is that some of the tiems were purchased long ago using a idfferent apple ID where I no longer have all the passwords and cant receive emails anymore.

Open About this Mac from the Apple menu.
Look for the Serial number (I think it can be found by clicking on the Version number twice). If not there, click More Info…
The Serial number will be in the Hardware Overview.
If the Serial number is missing, that may be the problem. However, I don't know how to fix it.

Items Not Copied from I-Tunes

I recently had to send my laptop in to fix a problem with it's power source and now I have it back and something has changed. I am trying to Sync up and buy some more songs and when I plug my I-Pod in it says "Some items in the I-Tunes Library were not copied because you are not authorized to play them on this computer". Nothing has changed and it is only the songs that were purchased. I have done it several times and every time the songs weren't copied. What can I do when I haven't changed anything?

Odds are they changed the logicboard/motherboard of your laptop when they sent it in, meaning iTunes thinks it's a new computer that needs to be authorized. Play one of the songs in iTunes, and you'll get asked for your iTunes Music Store username and password. Enter them. Once the song starts playing, you'll be able to sync your iPod fine and all the songs will be authorized.

ITunes items not copied because they could not be found.

When attempting to synch any iTunes content with my iPhone I receive a message that "Some of the items in the iTunes library were not copied to the iPhone because they could not be found. Actually, none of the iTunes content can be found. My iTunes library is on an external drive and I do not have a problem with synchronization of iPod or AppleTV. I would prefer not to move the library back to my machine, as it will take up too much space. Has anyone else experienced this issue? Any thoughts?

Oddly enough it could be a corrupted photo cache that causes this error message. The message may clear up if you delete the "iPod Photo Cache" folder in iPhoto, see this thread for info:
https://discussions.apple.com/thread/3390697?tstart=0

ITEM not copied further to Delivery & Billing

Hello Gurus,
Here when i create SO>DO>BILL, the material has BOM explosion in SO.Here i am partially delivering the Material,so when i create DO for 1st partial qty ,it works properly, bt when Deliver the same for remaining qty,its not exploding BOM here,the main item is not copied into delivery .Well both main & sub-item are Delivery related!!
Kindly guide .
Am i missing somthing in Copy control or any setting in Item Cat.Det??
Regards
Swati Bhatt
Edited by: swatibhatt on Jun 14, 2011 1:33 PM

Hello Adthya Sir,
I hv already gone through the link but its not yet solved.
Kindly tell me the settings again because i am facing the same issue as it was in that link.
Regards
Swati Bhatt

Account assignment for service item not copied from PR in PO

Hi,
We have a PR created for a service item from SRM. When we run ME59 it automatically creates the PO without issues by copying the account assignment details from the PR. The problem is as follows:
1. If we try to manually create a PO using ME21N from this PR, the account assignment is not getting copied from the PR but it throws the account assignment pop up screen where we manually have to enter the account assignment.
2. The client is using a Z transaction of ME59 which is copy of Me59 but with a few validations (nothing to do with Account assignment). This Z Tcode also fails to create the PO with the error 'no account assignment'. Indicating that the PR account assignment details are not getting copied.
Note: This is happening for all PR's irrespective of whether its created in SRM or created using ME51N.
Please let me know if someone has faced a similar issue
Thanks,
Lakshmi

Hi,
Please check first if notes 1085214 and 1102653
could solve the issue.
Regards,
Edit

Item not copied from Lead to opportunity (SAP CRM)

Hi guys,
I think that the object of tread is explicative
But i explain my problem: when i save a lead, with a certain status (yet customized), i want to the system create with follow up document an opportunity from my lead.
If i create a lead without product the system create an opportunity very well, but if i insert a product on my lead the systema don't create an opportunity, i see that in activity tab the event raise up but the opportunity is not create.
i have cusomized the action for process type and for category of item but it doesn't work.
Anybody can help me?
Thanks in advance.
Regards,
Luca

Check:
1. if you have set proper copy control between lead and opportunity transaction type under spro>crm>transactions>basic settings>copy control for business transactions>Define Copying Control for Transaction Types (you may wana try first without checkmark "Complete reference")
2. if you have set proper copy control for ITEMS between lead and opportunity ITEM types under spro>crm>transactions>basic settings>copy control for business transactions>Define Copying Control for Item Categories (first set checkmark just for "Copy PO data")
3. if you have set any copy control for ITEMS between lead and opportunity ITEM types under spro>crm>transactions>basic settings>copy control for business transactions>Define Item Category Determination when Copying (I suggest you first try without setting any entries in this customazing for your item types)
4. what method are you using for follow-up (I ussualy use COPY_DOCUMENT method)
Regards.

Create sales order with ref to quotation - usage of line items not copied

hi
i have created a quotation for which the first line item(higher level item) is a configurable item for which the value of the field use (vbap-vkaus) is blank and the line items the use field is given as 'HIDE DISCOUNT'.
when i created a order with reference to the above quotation i am not getting the value "HIDE DISCOUNT" populated for the line items for usage field ..
can any one knows any user exit / data transfer routine please suggest me
thanks in advance
rajani yeluri

hi
i have created a quotation for which the first line item(higher level item) is a configurable item for which the value of the field use (vbap-vkaus) is blank and the line items the use field is given as 'HIDE DISCOUNT'.
when i created a order with reference to the above quotation i am not getting the value "HIDE DISCOUNT" populated for the line items for usage field ..
can any one knows any user exit / data transfer routine please suggest me
thanks in advance
rajani yeluri

Price and Pricing conditions are not copied to PO for a line item !!

Hi
I have created a PO w.r.t a PR which has only one line item.
Now, I add another line item to this existing PO, i get an error message that the Price and Pricing conditions are not copied.
How do i rectify this error !!
Where might be the link for this Price and Pricing conditions to get copied in to this PO ??
MaruthiRam

What kind of PR and in the PO same material you enter for new line or new material and do you have any funcitonal authorization assigned o your user id
please reply

Every movie purchase through iTunes fails to transfer to my iPhone or iPad and the message I get is this: some of the items in the itunes library, including were not copied to the ipad because you are not authorized for them on this computer... help?

For a couple months now, every movie purchase through iTunes fails to transfer to my iPhone or iPad giving me the error: "some of the items in the iTunes library, including were not copied to the iPad because you are not authorized for them on this computer". I have read many forums about deleting, reinstalling, de-authorizing and authorizing my iMac through the iTunes store. Many suggestions don't work except to rename the movie to *.MP4 in Finder under the iTunes movie directory. I imagine this is a setting or a bug somewhere... any suggestions on how to bypass having to rename the files in Finder? My research into Google suggests this problem dates back to 2007 or so but it is now more prevalent than ever.
Thanks.

Try:
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases

EK01 and EK02 not copied to sales order item

Dear colleagues,
Is it possible to have EK01/EK02 transferred to the sales order item for assembly type = "0 no assembly order processing"
(specified in requirement class definition)? I would like to have planned production costs in EK02/EK01.
I don't specify costing method, variant and sheet in requirement class definition (transaction ovzg)
The steps are following:
1. create sales order
2. set manually proper item category (which refers to assembly type = "0 no assembly order processing")
3. MD04 - convert generated planned order (lower-level for HALB) into production order
4. MD04 - release HALB production order
5. MD04 - convert generated planned order (higher-level for FERT) into production order
6. MD04 - release FERT production order
7. ????? we could expect EK02/EK01 in sales order item coming from production orders ?????
I have found SAP note 857299 nevertheless it is not stated precisely there.
Please let me know your observations in this area.
Regards,
Wojtek

Hi..
Hi
Small change in the program will copy the PO number from Contract to sales order.In case need take help of ABAPer
Data which is not copied
LOCAL: VBKD-FKDAT.
LOCAL: VBKD-FPLNR.
LOCAL: VBKD-WKWAE.
LOCAL: VBKD-WKKUR.
LOCAL: VBKD-DELCO.
LOCAL: VBKD-BSTKD.
LOCAL: VBKD-ABSSC.
LOCAL: VBKD-BSTDK.
In your data declaration, you have
LOCAL: VBKD-BSTDK
Regds
MM

Item not copied

Similar Messages

Maybe you are looking for