Item number doesnt come the same as posted in iw33

Hi Experts,
I have created a new screen which was similar to iw31 which creates order when I give components in my screen.
My problem is when I give posnr 10 material number and requred qty = 6.
than i give posnr 20 for same material number and required qty = 10.
The component gets saved and creates order number.
My problem is in iw33 I can just see item line for 10 but not for 20.
Can anyone help me out ..
Thanks,
NIKHIL.

issue solved by me.
Thread closed.
Nikhil.
Edited by: Nikhil Kanegaonkar on Jul 7, 2009 8:53 AM

Similar Messages

Since I upgraded to Yosemite I see "iMac" followed by a long number under "Shared" in the navigatie column of Finder. Every day a new item is added with the same number, but followed by (1), (2) etc. My iMac has gotten very slooooow.

Since I upgrade my iMac to Yosemite I see "iMac" followed by a long number under "Shared" in the navigatie column of the Finder. Every day a new item is added with the same name and number, but followed by (1), (2) etc.
I use Time Machine.

I suffered with numbers next to my unit's name in Shared Devices, Finder Pane.
What I did was turned off my Time Capsule and whilst it was off I renamed my Macbook Pro in System Preferences / Shared.
I turned on the Time Capsule and thus far, 12 hours later the change has stuck.
There are many people suffering this bug, it's to do with ghosting on your network... Where your current machine see's itself as a ghost, hence you get a numbered mac...???

When I try to use iMessage on my iPad my phone number doesnt come up, only my email address does. HELP !

When I try to use iMessage on my iPad my phone number doesnt come up, only my email address does. HELP !!!!!!

It is OK to use the same apple id on multiple devices. That is how it was intended to be used. The phone number used must be a number registered on an iPhone. I receive imessages and face time calls on my iPad, iPhone and imac. Sometimes the email addresses and iPhone numbers don't properly register on all device. Logging out and back in on all devices can fix the issue.
Now with the release of ios 8 other compatible Apple devices can use the iPhone over a WiFi network to send and receive vioce calls as well.

How to make sure what material number format is the same in SRM and R/3?

Hi all!
I faced the following problem:
"Product does not exist in plant or it has been flagged for deletion". This error message occurs during shopping cart creation or during transferring purchase requisition from R/3 to SRM. It seems like SRM carries out some material checking in R/3 before shopping cart save and can't find out appropriate R/3 material. The only reason I can assume is different material number formats in SRM and R/3. Material number length is the same in both systems.
Thanks in advance,
Alexander.

Alex-
We experienced this problem just recently. Our situation involved trying to add a material to the cart from an internal catalog (CCM). As mentioned earlier their is a configuration setting to indicate the number of characters the "Product" (SRM terminolgoy) or "Material" (R/3 terminology) should be. We made our setting 18 characters (same length as field in R/3). The important thing to understand is that the material number is actually defined as a character field, not a numerical field so the length of the material "number" is critical for the system to accurately check the material. Do the following and see if you correct the error.
1) Go into transaction COMMPR01 in SRM, select the search tab and choose Material in the Find box, then click start. Choose the material you are experiencing the problem on and verify that the number of characters is the same in SRM as it is in R/3.
2) Next, go into R/3 and look at table entries in MARC for the material. This will show you all the different plants associated with the material.
3) Finally, create a cart and procure the material. If you get the error message go to the basic data of the cart and verify the location (plant) is one of the plants you found in step 2. If not, change the location to one from step 2 and check the cart.

I was installing the new EFI software update on my macbook pro and I became stuck on the grey screen with the window that said "installing 2 items", its been on the same screen for 2 1/2 hours. does anyone know what I can do?

As the title says.
I was installing the new EFI software update on my macbook pro and I became stuck on the grey screen with the window that said "installing 2 items", its been on the same screen for 2 1/2 hours. does anyone know what I can do?
I don't want to restart it because im scared that something might go wrong.
operating lion

LimitLess- wrote:
Hi,
I had the power supply connected when I attempted it previously but even so my problem occurred. My rom is different and so I still need to update it.
Thanks
I wanted to mark your answer helpful too but I didn't know that I could only put it for 2 answers. Sorry
That was good advice by G-N and s/he is correct about it. Unfortunately, ASC allows only 2 "helpful" and 1 "correct" marks per thread.

Hi, Ive been trying to hook up my M-Audio interface to my Mac Book Pro 15 laptop and it doesnt have the same size firewire port is there some kind of adapter i can buy?

Hi, Ive been trying to hook up my M-Audio interface to my Mac Book Pro 15 laptop and it doesnt have the same size firewire port is there some kind of adapter i can buy?

Just Google for a Firewire 400 to Firewire 800 cable, you are sure that this is what you have I hope?

Open UWL items by default in the same window

Hi All,
Appreciate if you could let me know if the following scenaio is possible?
When the user logs into the portal he will be seeing the "Inbox' page which is nothing but a standard UWL iview.
We have a task(TS001) for example which appears in the "Tasks" tab. Selecting an entry displays the following:
- Details
- Logged-On User Information
- Current View Information
- Current Navigation Information
- Current Item Information
All these are fine. Clicking on the "Subject" line, results a new window being opened fir the manager to either "Approve" or "Reject" the leave.
What I would like to do is:
I want the same window (that has opened in a new window) to be opened by default in the same window just beneath the "- Current Item Information". Meaning, selecting the row, should display the webdynpro iview in the same page rather than actually clicking on the "Subject" link.
Hope it's not too confusing....
Appreciate your reply and thanks in advance.
Cheers,
Sathya

Hi Saytha,
Is opening the workitems by clicking on the subject in the same window an option? I can help with this.
Within the xml files you can use the parameter called launch in new window. You can set this to No so that when you click on the subject of a task, the content that opens, stays opened right in the main part of the portal.
Here is some additional information about this:
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/2c/05b15de3864040a9426788a12699b3/content.htm
Beth Maben
EP - Senior Support Consultant
AGS Primary Support, Business Suite & Technology
Please see the UWL Wiki @
https://www.sdn.sap.com/irj/scn/wiki?path=/display/bpx/uwl+faq ***

Document number disrepencies for the same Document Type

Dear All,
I found an issue with Document number range with document type SA wherein last month document posted starts with 1431..... and in current month document posted starts with 1400..... how can this be possible? NOTE: The same document number range is attached to another document type as well.

Refer SAP Notes
1828201 - Missing document numbers for accounting documents
175047 - Causes for FI document number gaps (RF_BELEG)
1522367 - Document number gap reason and analysing method

BOM item number - not repeat the item number

Hi Friend,
I wonder if you can block the registration of the same item with item number in the BOM,we have some problens with other software that comunication with SAP.
Thanks
Exemplo:
Item            Material
0001           ABCDEFG
0001           HIJLMNOP   (this is problem, because there are two itens with item bom = 0001)
Edited by: Marcelo Marcelo Alexandre Oliveira on Oct 18, 2010 8:00 PM

Hi,
You have to go for a user exit for this purpose.
remmeber in case item is being changed with chnage number(with history req), it might show multiple line items with same bom item( but it will be for same bom compoennet)
Also i guess for alternate and discontinuation bom componenets line item number remains the same.

How come the same apps that are available for my iPhone and my iPad are not the same as the apps in the app store on my mac

I want some of the same apps available on my iphone and ipad2 to be available on my macbook pro app store and to be able to link them through icloud. Is this not possible? If not, why not?

The Mac uses Mac OS X and iDevices use iOS. These are two different operating systems and the apps must be written for each operating system specifically, even when the apps go by the same name, such as the iWork apps, they are two ifferent versions of the same app for the two different platforms.
So, as an example, Safari has been written for three different operating systems, Mac OS X, iOS and Windows. And the Safari apps, as similar as they are visually, are not interchangeable for the different platforms.

HT204053 My Icloud account number is not the same as my Apple Account how can I change my I cloud account to match my apple . None of my photos are going over to my I cloud

My Icloud ID is not the same as my Apple ID how can I chamge my Icloud ID to match. Non of my photos are streaming over to my Icloud and I have been paying extra for additional storage space.

Start here, change your country if necessary and go to manage your account and request another email.

How come the same script only works in one form?

I made a checkbox that when checked it makes another subform visible. The script works perfect in one pdf. When I used the same script in another pdf (except I changed the variables of course) it doesn't work??????
It's set the same in both scripts. The subform name is exactly "CR" in uppercase. In the Events its set to click*, javascript at the client. Here is the script. Please let me know what's wrong????
if (this.rawValue == 1)
CR.presence = "visible";
else
CR.presence = "hidden";

You have to have the object referenced correctly and that can include subform and section information.

Collecting all the records in the item int table where the same matnr

Hi All,
I have two internal tables with records as below.
HEADER INTERNAL table
material num       plant
   50410              LV01
   50411              AN01
   50412              AN01
   50413              LV01
ITEM TABLE
Material num           stor loc
50410                     ER01
50410                     ALQW
50410                     WFDD
50412                     ER01
50413                    ER01
50413                     XK01
I want to move this to final internal table, here the record 50411 is not there in second int table still i want to move to final table.
in the final int table record should be as follows
material          plant        stor loc
50410            LV01        ER01
50410            LV01        ALQW
50410            LV01        WFDD
50411            AN01
50412            AN01       ER01
50413            LV01        ER01
50413            LV01        XK01
I'm not getting the full records in the final int table.How to do this.
Thanks & Regards,
Sabu

Hi Sabu,
You can get the data in final internal table as follows :
**First Declare the Final Internal table as :
types : begin of wy_final,
           matnr like mara-matnr,             " Material Number
           werks like mseg-werks,            " Plant
           lgort like mseg-lgort,                 " Storage Location
           end of wy_final.
data : wt_final type standard table of wy_final with header line.
**Declare a temporary Header Internal Table
wt_header_temp[] = wt_header[].
Then loop at Item table as it has multiple entries for same material Number
loop at wt_item.
**Then read Header Table for mapping material Number & picking the corresponding Plant.
read table wt_header with key matnr = wt_item-matnr.
if sy-subrc eq 0.
wt_final-matnr = wt_item-matnr.
wt_final-werks = wt_header-werks.
wt_final-lgort = wt_item-lgort.
append wt_final.
clear wt_final.
endif.
read table wt_header_temp with key matnr = wt_item-matnr.
if sy-subrc eq 0.
delete wt_header_temp.
endif.
endloop.
loop at wt_header_temp.
read table wt_final with key matnr = wt_header_temp-matnr.
if sy-subrc ne 0.
wt_final-matnr = wt_header_temp-matnr.
wt_final-werks = wt_header_temp-werks.
append wt_final.
clear wt_final.
endif.
endloop.
sort wt_final by matnr.
I Think this would probably solve your purpose.
Thanks & Regards,
Bhavika
Edited by: bhavika kumar on Mar 19, 2009 5:46 AM

Different JCombobox items in JTable for the same column

Hello Everyone,
I am reading from a file and displaying in a JTable. I want all cells in a specific column to be JComboBoxes but the items in the JComboBox differ from one cell to another, how can this be achieved?
The following is a snippet from the Sun tutorials,
JComboBox comboBox = new JComboBox();
comboBox.addItem("Snowboarding");
comboBox.addItem("Rowing");
comboBox.addItem("Knitting");
comboBox.addItem("Speed reading");
comboBox.addItem("Pool");
comboBox.addItem("None of the above");
sportColumn.setCellEditor(new DefaultCellEditor(comboBox));
And hence every cell in the sportColumn has the exact same set of options in the JComboBox which is not what I want since I read from an external file.
Any help or sample code would be highly appreciated.
Thank you in advance

Override getCellEditor(int row, int column) in JTable to control which editor gets used for which cell.

Can you sync your iPod touch with computer 1 for computer 1's iCal items and also sync the same iPod touch with computer 2 for computer 2's music, apps, etc. items?

I have a MacBook Pro through my college, and I have all my iCal items on that computer, but I have all my music, apps, etc. on a PC desktop that is my personal home computer. I am wondering if I can sync my iPod touch with my MacBook for the iCal items and also with my PC for the music and such without loosing either of the two when trying to sync with the other computer?

Have a look Here > Managing content manually
From Here > http://www.apple.com/support/iphone/syncing/

Item number doesnt come the same as posted in iw33

Similar Messages

Maybe you are looking for