Item number from purchase order number....

Hi,
How do I get the POSEX (line item number) field for a given Purchase order number LIKP-VBELN

Hi,
Let me be more clear.
I have to find item number of the underlying purchase order (POSEX).
So based on VBELN of LIKP table I have to find POSEX from VBAP table.
( I guess I need to find subsequent or preceding document stuff. I am not so sure about it. And then
based on that I go in VBAP and find POSEX )
So what is the link between LIKP and VBAP table...

Similar Messages

How 2 Copy Header & Line Item Text from Purchase Order 2 Out Bound Delivery

Hi SD Gurus,
I want to copy header and line item text from Purchase Order to Out Bound Delivery (This is required in Stock Transfer Process).
I have been able to do successful config. for copying header and line item text from Sales Order to Outbound Delivery but config. doesn't seems to be same for copying text from PO to OBD.
Is there any way to achieve the same? Can some expert show the way to achieve this.
Thanks in advance.
Warm regards,
Rahul Mishra

Hi Ravikumar thanks for u quick reply.
This is wht is currently coded.
concatenate values to get item text for read text function
   invar3+0(10) = invar1. "PO number
   invar3+10(5) = invar2. "PO line number
   SELECT SINGLE * FROM stxh WHERE tdobject = 'EKPO'
                               AND tdname   = invar3
                               AND tdid     = 'F01'
                               AND tdspras = sy-langu.
   IF sy-subrc = 0.
     invar4 = invar3.
reading the text for the document items.
     CALL FUNCTION 'READ_TEXT'
       EXPORTING
         id       = 'F01'
         language = sy-langu
         name     = invar4
         object   = 'EKPO'
       TABLES
         lines    = it_itab.
I have seen some PO's which have info rec texts in that, which gets pulled by the above code...first thing is its id is F02 which exist in STXH table also there is other text with F01 id, and hence the table it_itab gets both these text hence no pbm.
but i came across a PO which has only one text which is info rec text with id F05 and is not store in stxh and hence doesnot get pulled by read_text fm. How do i change my cod to get this text which should not hamper other PO's as well.
As mentioned in above msgs, this F05 could be retrieved by providing object name as EINE.
anyhelp will be appreciated and rewarded.
thanks

"All items from purchase order cannot be invoiced"

Hello, 
 
I'm on a SRM 7.0 SP 5 system (ext-classic scenario). Here i try to create an invoice with reference to a Purchase Order, but none of my Purchase Orders can be used for reference. I get the following warning message 'All items from purchase order cannot be invoiced'. 
 
- Created via POWL (create with reference -> invoice/credit memo) i always get the warning message 'All items from purchase order cannot be invoiced'. And no items are converted / can be used for invoicing. Additionally when i use the search option 'find purchase order' within the create invoice transaction i can not find any purchase order to use, it shows 'There is no search result' while there are plenty purchase orders marked with 'invoice expected'. 
 
I am able to create invoices without reference. 
 
I tried vendors set up only for 'invoice expected' and 'GR', 'invoice expected' / 'GR' / 'GR-based-IV' and 'invoice expected' only none of them works, indicators set on vendor master are correctly used on the created purchase order. Outputting PO doesn't make any difference neither. 

I have not set up the following (do i need to?): 
- Deactivated the 'CRME' transaction type, no Credit Memo transaction type has been configured/is active. 
- I have not defined the 'INV' transaction type as a follow-on document for my ECPO transaction type within the define transaction type transaction. 
- Tollerances 
 
edit -> i've already searched thorougly for SAP notes but no note seems to cover this particular problem. 
 
Help is very much appreciated

Solved! Added SYS attribute for back-end system in organisational scheme.

Item text from sales order to purchase requisition

Hi Experts,
I have below queries ,
1. What are the controls to generate/create a purchase requisition from a sales order.
Is this possible that a Pur. req generated from a sales order but sales order is not its account assignment.
How item text from the sales order can be copied to purchase Requisition, does settings in purchase requisition in SPRO (Purchasing Purchase req-text for purchase req----define copying rules) works only for automatically created Pur req.??
item text from sales order can be copied for PR created through MRP or planned orders converted to PR.??
I will appreciate if someone can provide me documentation on basics of sales and distribution at my email
[email protected]
Thanks in advance
anand

hello, friend.
i can only answer part of your question as i am not sure of the others. however, yes... you can automatically create a purchase requisition from the sales order.
one example is third party sales. because of the item category group that you specified in the material master, the sales document determines an item category (and schedule line) that controls the creation of the purchase requisition. here, the system knows that you must source the material from your vendor for delivery to your customer.
further, as in the above case, when your company creates the PO with reference to the PR, your company appears as the buying entity but the ship-to address is that of your customer.
i did not understand your question on account assignment. please elaborate and we'll see if we can come up with the answer.
if you wish to see documentation, you could refer to SAP's article on Third Party Sales. other scenarios such as just-in-time inventory for trading companies or make-to-order companies may also apply.
regards.

Not to include item from purchase order to the delivery order

Hi,
i need some guidance on above topic. The user requested to have the functionality not to include the item from purchase order to delivery order when the item having order balance quantity more than the available stock.
In other words, if a PO contains several items, those order balance quantity which is more than the available stock will not be included in the DO.
is the above scenario possible?
please advise.
Thanks.

Hi Yue ,
u can do it , but in this case u have to make use of user exit or BADI.
option 1 .
by using user exit , u can delete/change picking/confirm qty .
option2:
while doing the PGI , do can cross check stock avail with PO qty and raise error messages.
LE_SHP_GOODSMOVEMENT --> see its documentations in se18.
Regards
Peram

Delete item from Purchase Order

Dear All,
I want to cancel line item from Purchase Order.
But i am unable to do it as i have already made advance payment against PO/Item.
Actually advance payment was against another Item of PO but by mistake selected wrong item while f-47.
Now i want to delete item for which made avance payment and transfer advance payment with another PO item.
How to do it.
Regards
Swati

Hi,
Your Issue
Lets say, you have created two items in a PO, and made adv payment against item 10 instead of 20.
Now you want to delete the item 10---
Solution
I hope you have not done any GRN to both items (10 & 20) of your PO.
Then make your item 10 as same as your item 20. (Do change the material code, order qty, price etc)
Then delete the item 20.
So with this, you have made your errorised PO item as actual item, and deleting yout actual PO item as errorised item.
This is as good as swaping the items from one item to another item in the same PO.
This will resolve your issue.
Thanks,
Srinu

PO item was deleted from purchase order but it is visible in MD04

Hi all,
I have deleted the PO item form the purchase order but after saving also , it is visible in the MD04, i just want to remove form the MD04 as sub req .
What could be the reason?
Thanks in advance
Regards
Prasad

Dear,
Please check: http://sapfans.com/forums/viewtopic.php?f=9&t=312950&start=0&st=0&sk=t&sd=a
Subreq in MD04
How to Delete SubReq , DepReq , OrdRes in MD04
AND MOST IMPORTANTLY SEARCH FOR RELATED OSS NOTES ALSO...
Regards,
Syed Hussain.

Is there is a way to have a link from purchase order to cost center report.

Is there is a way to have a link from purchase order to cost center report.
I am meaning kind of:
Standard way to customized this link?
or
User exit to have this link in place
or
Any other solution
Thanks

For me it does not make any sense from going from PO to cost center report.
However, if you want to see the purchase order cost incurred with a cost center, execute KSB1 report. Within the layout, bring "Purchasing Document" field, where you can see the purchase order number in cost center line item report.

Table links from Purchase order to condition types

Hi,
I am looking for the tables to go from purchase order, and to read the conditions associated with the PO.
I have EKKO, and EKPO, but I cannot find the table where the condition information is stored. I have KONV and KONP, but they seem to be the tables where the condition type info is stored, not the link table where the purchase order specific information is stored.
Can somebody please point in the right direction?
Regards
Piet
Edited by: Piet Strydom on May 12, 2009 12:52 PM

Hi,
The PO and the Condition Record Number Link happens in the Table EKKI.
from this table get the condition Record number line item wise and execute in KONV.
Hope so it helps
Regards
Anjanna
you can check the below thread posted by self for further ing
Re: PO item Condition Record number and delivery address of PO - Need a table n
Edited by: Shiva Rajanala on May 12, 2009 1:42 PM

Creating asset from purchase orders

Dear Gurus.
Please let me know how to create asset from purchase orders.
Thanks
Rgds,
Saurabh

hi,
First, determine the information that is necessary for creating the purchase order:
Check in the Purchasing component whether a purchase requisition exists for the asset (Logistics - Materials management - Purchasing).
Determine the vendor from whom you are ordering the asset. If needed, enter the purchasing data for the vendor.
Determine the asset number of the asset that is being ordered. If necessary, create a new asset.
Create the purchase order. If there is a purchase requisition, use it as a reference (in Purchasing: Purchase order - Create).
In the initial screen, when you specify the account assignment type A (for asset), this determines
The account assignment to an asset
How the goods receipt or the invoice receipt is to be handled (are asset values to be posted at the time of the goods receipt or at the time of the invoice receipt).
Once you have entered the general purchasing data in the first screen (order date, material group, etc.), a dialog box appears. Enter the asset to which account assignment is to be made in this dialog box.
If the asset master record for your purchase has not yet been created, you can create it directly from within the purchase order transaction.
Display the order item and its current delivery status (in Purchasing: Purchase order - List display - By account assignment).
Later, post the goods receipt or the invoice receipt. (The Customizing definition of the account assignment type determines when the asset values are posted - either at goods receipt or at invoice receipt.) See the corresponding documentation for the Materials Management (MM) component.
regards,
Siddharth.

Add restriction while create item by "Old Purchase Orders and Templates"

We are consider to add restriction while create shopping cart item by "Old Purchase Orders and Templates". After implement such restriction, create item by copying old shopping cart item is not allow for particular matereial group number.
Is there any BADI can be used in our case? If there is no, could modify HTML template the only solution?
Regards,
Donald

Hi,
If the restriction is for certain group of people,then you have 2 options:
1.Make the link invisible for those group of people by implementing the BADI BBP_SC_MODIFY_UI.In the BADI,first check the user attributes like particular role and based on that make the link invisible.
2. Assign certain role to the group of users who should not see the link "Old Purchase order and templates".You can hide this link in the MENU by removing this from the lits of trasctions in that particular role.In PFCG,go in that role and then under MENU tab,remove the entry for "OLD PURCHASE ORDER AND TEMPLATES".
BR,
Disha.
Do reward points for useful answers.

Item changed in Purchase Order version

Hi to all,
my customer needs to have the list of items of a purchase order that have changed in a version. I explain: I have a purchase order in version 0 with 10 items, for example. I create version 1 and II change quantity or price or unit of measure or other of 3 of these items. So I need to know if exist a function module with in input version number and in output these 3 items and what changed.
Can you help me please?
Thank you very much
Enrico

There is no company/purchasing/plant specific customizing for purchase order text.
The customizing copying rules for the "Texts for Purchase Orders" affects all equally .
If the text in the purchase order in ME23N is already filled different to other plants, then you either have a modification in place, or the texts are differently maintained in the referenced data (vendor, material, info record, contract)

Transaction to Mass Update Header and Item text in Purchase Order

Dear All
Whether any Transaction in SAP to mass update the Header and Item text in Purchase Order.
One Single Text For Ex :" This is a Dummy PO" .
This text needs to be updated in large number of POs.
Please let me know your views
Reg
Shyam

Hi Shyam,
You can make use of BAPI_PO_CHANGE for this. See the documentation of this BAPI in SE37 for more information.
"You can transfer header and item texts in the PoTextHeader and PoTextItem tables. You import texts
for services in the PoServicesText table. Texts can only be replaced complete."
Regards,
Purnima.

Item text for Purchase order

Hi All,
I Wants to pick the item text for Purchase Order. in my prog i already picked the header text by Read_text FM .i wants to used the same FM for item pickup . Can you please tell the FM parameter Value, so that i can pick proper Item text value.
<REMOVED BY MODERATOR - REQUEST OR OFFER POINTS ARE FORBIDDEN>
Thanks in advance
Moni
Edited by: Alvaro Tejada Galindo on Sep 1, 2008 5:09 PM

Hi Moni
We can use the same procedure to retrieve texts of any document, just that the Name, Object and ID varies.
To find the required parameters for each object and document do as below:
1. Open an existing document
2. Go to the required Text
3. Double click on the same
4. It takes you to the editor screen.
5. Now use menupath: Goto->Header
6. In the popup screen you will find the required paramters.
For item texts the Name will be (PO Number + Item Number).
Using the details, you can pass the same to FM: READ_TEXT and retreive the texts in programs.
Regards
Eswar

A report to view the cash flow coming from Purchase Orders.

Hi All,
Could anyone suggest me a report to view the financial obligations which comes from Purchase Orders?
Thanks
Gandalf

Hi,
You will have to activate basic cash management (part of FSCM) and use TCode FF7B (liquidity forecast). What the report would do is, based on the delivery date of the purchase order and the payment terms of the vendor (plus some grace days for clearing the payment as per configuration) determine the date of expected payments and project the cash (and bank) balance by days/week or months.
Alternatively you can write your own ABAP code which will do the same thing.
a. Take a list of all open POs and determine the delivery date (EKKO and EKPO)
b. Add the payment terms as per purchase order to the delivery date
c. Compute the cost of the purchase order item
d. Display the report which projects expected payments by date
Rgds
Shivram.

A report to view the cash flow from Purchase Orders.

Hi All,
Could anyone suggest me a report to view the cash flow (financial obligations) which comes from Purchase Orders?
Thanks
Gandalf

Hi,
You will have to activate basic cash management (part of FSCM) and use TCode FF7B (liquidity forecast). What the report would do is, based on the delivery date of the purchase order and the payment terms of the vendor (plus some grace days for clearing the payment as per configuration) determine the date of expected payments and project the cash (and bank) balance by days/week or months.
Alternatively you can write your own ABAP code which will do the same thing.
a. Take a list of all open POs and determine the delivery date (EKKO and EKPO)
b. Add the payment terms as per purchase order to the delivery date
c. Compute the cost of the purchase order item
d. Display the report which projects expected payments by date
Rgds
Shivram.

Item number from purchase order number....

Similar Messages

Maybe you are looking for