Item of sales order is so repeated post  goods issue that stock is negative

dear expert:
the stock value of  sales order is negative ,because the goods is post twice,i donn't know what' cause of question  .in schedule line of sales order ,order quantity is 1, confirmed qty 1,deliveried qty :2.
so mska-KALAB is -1.
please help me analyse it .
best regards

Check your other thread on the same subject
[sales order is deliveried but stock is negative   |sales order is deliveried  but stock is negative;
thanks
G. Lakshmipathi

Similar Messages

  • CS service order budget can't control goods issue from stock?

    Hi experts,
    I set budget to a service order(CS), it can control Purchase order from service order, however it can't control the good issue from stock(type "L") !  Is it the setting problem? how to deal with it?
    best regards
    lance

    1st
    If you actually bothered to read my post, you would see that I decided to change for the X220 after I saw it in the flesh and realised how much close it was to the X121s dimensions. If lenovo wishes this not to happen very often, they should bother do something about the fact that there is no Lenovo dealership/agent/representative in Oxford.
    2nd.
    If Lenovo lists paypal as payment method, they should honour it. Otherwise, do not list it at all.
    3rd.
    If lenovo says that I can cancel the day I ordered with no implication, they should also honour this. Not ignore my e-mails (contrary to the terms & conditions stated) and ship it so I can perhaps keep it. That's not good business practice. That's playing dumb.
    They had 5 days to cancel, they prefered to wait for the item to be produced/stocked so that they can ship it to a small hamlet in Oxfordshire (half the way around the globe) so I can send it back. So yeah, this little laptop will circumvent the Earth.
    If this is not wasteful, then what is?
    As far as I am concerned, it took me 10 telephone calls and to DR just to get the cancellation e-mail which should be sent immediately.
    If you do not value your time, it is your problem, not mine.
    I will not be buying a Mac either as I do not like the product, but the difference in service couldn't be more stark.
    All the best,
    Sav.

  • Automatic Post Goods Issue Of Stock Transport Order

    Here is the scenario:
    We are using stock transport order to logically move inventory from one company to another company inside the same physical location. The material# is the same but the plant# is different.
    Process is as follows:
    Associate enters the purchase order
    If inventory exists - delivery is created automatically
    The delivery is also auto picked
    Currently, we have the inventory to PGI in a batch job several times a day.
    However, the user would like to have the inventory - move as soon as the delivery is created.
    Does anyone know of any technique - to post the inventory immediately.
    I was thinking along the line of a workflow/create of an idoc (WHSCON) to faciliate this.
    Kind Regards, Steve

    You could simply scedule the batch job to PGI right after the delviery creation job runs (just delay it a few seconds after the longest period of time the delivery creation job runs).
    So there would only be a very short delay, Looking at vl10g now to see is auto PGI is an option but I am thinking it is not
    (I will update my post if I find it is)
    Edit: It doesn't look like a standard option but I would imagine you could change a function code profile with custom user exit to trigger goods issue

  • Delivery document is completed,but post goods issue.

    dear :
    devlivery docuemnt is set  completed by  Manually closing completed deliveries(programme:SHP_DELIVERY_COMPLETE),but it cann't post goods issue .so stock is exist .
    how can i consume the stock ?
    please help me analyse it .
    best regards.

    hello,
    Check whether there are confirmed schedule lines in the sales order for which the delivery is made.
    Also check if the storage location is there in the sales order
    Regards
    Mahesh

  • STO from unrestricted to E stock from TAB item in Sales Order?

    Hi all,
    We have the situation where we are shipping stock intra-company via the STO Process. The requirements are being driven of a TAB item on the Sales Order, and the purchase req is being generated automatically, and being converted to STO > Delivery > Shipped then received at requesting plant.
    If we leave the Dependent Requirements Indicator on MRP4 in Material Master to blank the stock is shipped from the shipping plant as Sales Order stock and received into the requesting plant as Sales Order stock. If we change the Dependent Requirements Indicator on MRP4 in material Master to '2' then it trys to ship the stock as unrestricted, and the theory is that is should be received as Sales Order stock.
    Shipping as Unrestricted and receiving as Sales Order stock is exactly the scenario we are trying to achieve. 
    We initially ran into an issue with error message M7146. OSS Note 305582 describes this situation, and says we need to change the consumption posting on Account Assignment Catgegory M to be 'E - Accounting via Sales Order'.
    So we changed this, and now when we try and create the Sales Order we get an error message kd051 Maintain a Settlement Profile. We are told by our Finance people that we cannot use the Sales Order as a cost collector as it impacts the PA reporting, so I am wondering if anyone has any suggestions as to how we can resolve this issue.
    Many Thanks.

    Dear all,
    can u update me with the depot to depot process   ( like  there some  20 qty in 1300 depot   i wanted to transfer the  20 qty to 1200 depot)
    what is the process should be followed   
    i am still  not getting the right way  
    please guide me    my process i am following is  :
    supplying plant
    Create a STO PO from receiving plant  T-code ME21n
    Create delivery with ref to STO PO   T-code VL10b
    Post goods issue     T-code VL02n
    Create Depot Excise invoice with  Reference to delivery document T-code J1IJ
    Create pro-forma invoice   T-code VF01
    Receving plant
    Goods receipt   (With out excise capture selection)  T-code MIGO
    Capture excise invoice at depot  (Enter challan qty and Excise baseAmount)  T-code J1IG
    Please guide me on this as it is critical

  • How to fetch post goods issue date and sales order creation date

    Hi All,
    How to find out the difference between SD Sales Order Item Creation Date and final Post goods issue Date. I would like to know how to fetch those dates and what is the relationship between the tables from which i will get the dates.
    Please let me know the solution .
    Thanks in advance.

    Hi,
    Sales order creation date is when u raise a sales order in favor of the customer using VA01.......using ATP logic system purposes the material availability date....
    after saving ur sales order...when u raise the Delivery using VL01n  w.r.t to OR...than u have to perform picking ....In the picking Tab...specify the amount to be picked than press Post Good Issue....means the goods left the company premises ..
    You can the fetch the values using tables-  Use T code   SE12  or SE16
    Vbak-----order header
    Vbap-----order item
    Vbek-----order schedule line
    Likp-----Delivery header
    Lips----Delivery item

  • GRN number for rejected items in sales order

    hi sapgurus,
    i want to know the grn number for rejected goods in the sales order 
    consider if i put a sales order for a material named X for 10 quantities and if 5 quantities are rejected i will put GRN for those rejected items and add it to my stock.
    I have taken GRN no linking VBAK with VBRP .VBRP with LIPS .LIPS with MKPF thro VBELN_LA (ie.delivery note).
    the delivery note will be updated only Post goods issue happens with complete status.
    Is there any other way to get GRN no without delivery note while PGI in process Status.
    thanks in advance!
    Edited by: rakesh on Oct 3, 2008 11:29 AM
    Edited by: rakesh on Oct 6, 2008 12:31 AM

    i solved ths issue

  • Copy down Ship-to Partner from main item to sub-items on Sales Order

    This is my first post on the forums here.  I'd appreciate any help you can give on my issue below.
    I have a requirement to copy down the ship-to partner from the main item to sub-items during sales order create or change.  Currently I have code in include MV45AFZB within user exit USEREXIT_FILL_VBAP_FROM_HVBAP as follows:
    <i>* Need to be able to copy the ship-to of a BoM parent down to the
    respective BoM children if the parent has a different ship-to
    from the header.
    data:  wa_xvbpa like vbpa.
    Clear: wa_xvbpa.
    read table xvbpa into wa_xvbpa with key posnr = hvbap-posnr
                                            parvw = 'WE'.
    A BoM parent line has a different ship-to from the header.
        if sy-subrc = 0.
          read table xvbap with key uepos = hvbap-posnr.
    See if current line is the child of that BoM parent
            If xvbap-uepos = hvbap-posnr.
              move wa_xvbpa-kunnr to xvbpa-kunnr.
              move xvbap-vbeln to wa_xvbpa-vbeln.
              move xvbap-posnr to wa_xvbpa-posnr.
              move 'WE' to wa_xvbpa-parvw.
              modify vbpa from wa_xvbpa.
            endif.
          Endif.</i>
    This isn't working for me.  At one point, I was able to copy the ship-to down to the first sub-item but not any subsequent ones.  I'm sure I need to add some code to another sales order user exit to get this to work, but I'm at a loss at this point.   Has anyone had to do this or something similar before? 
    Thanks very much in advance for your help.
    Angela

    Hi,
    Can you check few more things and tell me?
    - In this exit, does XVBPA and XVBAP contains all the line items. ( main and sub items ).
    - In Sales order creation time, do these table have VBELN populated when this exit triggers.
    - If you modify XVBPA or XVBAP in this exit, do they get overwritten after that.
    Try this code. See if it works.  Let me know if you still have a problem.
    DATA: wa_hvbpa LIKE vbpa,
          wa_xvbpa like vbpa.
    CLEAR: wa_hvbpa, wa_xvbpa.
    * check if HVBAP and VBAP line items are not same
    IF vbap-posnr <> hvbap-posnr.
    * read the ****-to partner from main-item
      READ TABLE xvbpa INTO wa_hvbpa WITH KEY posnr = hvbap-posnr
                                              parvw = 'WE'.
      IF sy-subrc = 0.
    *   read the line item data for sub-item based on main item
        READ TABLE xvbap WITH KEY posnr = vbap-posnr
                                  uepos = hvbap-posnr.
    * See if current line is the child of that BoM parent
        IF sy-subrc = 0.
          MOVE wa_xvbpa-kunnr TO xvbpa-kunnr.
          MOVE xvbap-vbeln TO wa_xvbpa-vbeln.
          MOVE xvbap-posnr TO wa_xvbpa-posnr.
          MOVE 'WE' TO wa_xvbpa-parvw.
          MODIFY vbpa FROM wa_xvbpa.
        ENDIF.
      ENDIF.
    ENDIF.
    Regards,
    RS

  • Partial delivery per item in sales order and ATP - schedule lines

    Hi,
    I've problem regarding ATP- schedule lines and partial delivery flag.
    In sales order there is flag Partial delivery per item B / 1 . That means create only one delivery even with quant 0. That comes from customer master or customer info-record and it is OK.
    Please look at next example.
    Customer requires:
    10 PCS of materail A on date X. Only 5 PCS are available on date X.
    10 PCS of material B on date X 0 PCS are available on date X, 10 PCS are available on date Y.
    So if we create outbound delivery on date X it will contain only 5 PCS of material  A. No successive deliveries will be created for material A because of the flag B/1. That item is closed.
    Problem is with material B.
    The sales order will be open because of material B and on date Y we can easily create another delivery with 10 PCS of mat B.
    That is wrong. Agreement with customer is only one delivery for ALL items in sales order. If we create delivery on date X it should contain only materials which are available on date X and sales order should close.
    Do you know how to fix this problem?

    Hi,
    I've think you didn't understand my requirement. I allways get schedule lines but they are confirmed on different dates.
    Example in same sales order we have:
    Schedule line for item A:
    DATE X confirmed quantity 10
    Schedule line for an item B.
    DATE X confirmed quanitity 0 (zeroe)
    DATE Y confirmed quantity 10.
    I would like to create outbond delivery on date X with:
    item A quantity 10
    item B quantity 0.
    And if that hapens than B/0 rule will work or reference customzing that you suggested before. So order will be closed because all items are processed or referenced once.
    Do you know how to do that?
    Regards

  • Restriction of number items in sales order

    hi,
    how can i restrict no of items in sales order?
    eg:
    sales order has been created for 10 items and all the 10 items
    quantity should be 72 not more than that and system should
    not allow to enter the quantity.where we can configure for
    this.
    regards,
    balajit

    You have to try with User exits in the program MV45AFZZ - USEREXIT_READ_DOCUMENT or USEREXIT_SAVE_DOCUMENT in the same program
    thanks
    G. Lakshmipathi

  • How to get Characteristic Values assigned to the line item of Sales Order?

    Hi,
    I want to get the Characteristic Values( Variant Configuration )assigned to First Line Item of Sales Order.
    I was using the Fn. Mod.: VC_I_GET_CONFIGURATION_IBASE,
    this fn. mod. giving all the Characters but not the assigned characteristic values.
    Is there any other way to find characteristic values of sales order.
    Thanks,
    vinayak.
    Message was edited by: vinayaga sundaram

    For example, please see this example program.
    It lists the characteristic names, the values, and the description of the values which are tied to a sales document.
    report zrich_0001.
    * Internal Table for Characteristic Data
    data: begin of i_char occurs 0.
            include structure comw.
    data: end of i_char.
    data: xcabn type cabn.
    data: begin of xcawn,
          atwtb type cawnt-atwtb,
          end of xcawn.
    data: xvbap type vbap.
    parameters: p_vbeln type vbap-vbeln,
                p_posnr type vbap-posnr.
    start-of-selection.
      select single * from vbap into xvbap
                 where vbeln = p_vbeln
                   and posnr = p_posnr.
      clear i_char.  refresh i_char.
    * Retrieve Characteristics.
      call function 'CUD0_GET_VAL_FROM_INSTANCE'
           exporting
                instance           = xvbap-cuobj
           tables
                attributes         = i_char
           exceptions
                instance_not_found = 1.
      loop at i_char.
        clear xcabn.
        select single * from cabn into xcabn
                 where atinn = i_char-atinn.
        clear xcawn.
        select single cawnt~atwtb into xcawn
                   from cawn
                     inner join cawnt
                       on cawn~atinn = cawnt~atinn
                      and cawn~atzhl = cawnt~atzhl
                          where cawn~atinn = i_char-atinn
                            and cawn~atwrt = i_char-atwrt.
        write:/ xcabn-atnam, i_char-atwrt, xcawn-atwtb.
      endloop.
    Regards,
    RIch Heilman

  • Add Line Item In Sales Order VA01

    HI All,
    I  have new requirement in creation of sales order . Here we have free promotion sales . Here if customer buy one material then he will get some other material as free .In standard sap we can give only one line item as free not more than that .
    Here our requirement is more than one line item . I suggested them maintain all the free materials in one Ztable when ever the original material  will come for  sales order then i have to fetch these materials from ztable  automatically and it should create sales order. I started doing this using user exit  FORM USEREXIT_MOVE_FIELD_TO_VBAP.
    These are the below links i checked in our sdn.
    Adding Line items to sales order on creation using User-Exit in VA01.
    Please give me some idea on this .
    Regards,
    Madhu.

    Hi Asik,
    Thanks for your reply.In my case i can not got for Bom  because the schemes will change for every ten days. I think Bom  creation will fill a lot of data but it wont solve my issue.
    Regards,
    Madhu.

  • Pricing For Text Item in Sales Order

    Hi ,
    How to give price for text item in sales order.
    With regards.
    Afzal

    Hi Afzal,
    consider to create a single service material as a generic one, type DIEN, with basic data and sales org views, with  item category group LEIS (it will determine item category TAX in sales order). Material description could be "Don't forget to change me!" so in sales order user remembers to changes the description according to the especific sales order requirements.
    Regards,
    JM

  • How to add 100 line item in sales order at one time

    Hello Guru's
    My requirement is to add 100 line items in sales order at once.
    what can be good approach to overcome this situation.Is there some kind of tool which can be useful?
    Let me know your suggestions
    Thanks a lot in Advance

    Hi,
    do configuration for Proposal Items tab - like -
    then create sales order using with Propose items button - VA01 - then system will accept more than 50 line of materials at a time
    Please Use BAPI -- creation of Sales order
    Thanking you
    Regards
    Mahesh

  • How to ChangePlantfor each item of Sales order using User Exit SAVE_DOCUMEN

    Hi All,
    I have to change plant for Each line item of sales order using (MV45AFZZ) (USEREXIT_SAVE_DOCUMENT) based on first Schedule line.
    if Confirmed Quantity is Less than Ordered Quantity.
    based on first Schedule line.
    it has to select other Plant and need to populate it in line item of sales order.Please see the below code and let me knoe if any changes required... Thanks in Advance.
    data : wa_vbep like xvbep,
           Lv_matnr type mara-matnr,
           lv_werks type marc-werks.
    DATA: it_vbap TYPE STANDARD TABLE OF vbap,
          wa_vbap TYPE vbap.
    field-symbols: <wa_vbap> type VBAPVB.
    clear wa_vbap.
    *loop at xvbap into wa_vbap.
    loop at xvbap assigning <wa_vbap>.
    read table xvbep into wa_vbep with key posnr = <wa_vbap>-posnr.
    if wa_vbep-ETENR = '0001'.
    if sy-subrc = 0.
    IF wa_VBEP-BMENG LT wa_VBEP-WMENG.
        SELECT SINGLE DWERK
                     INTO lv_werks
                     FROM MVKE WHERE matnr = <wa_VBAP>-matnr
                                and  DWERK ne <wa_VBAP>-werks.
    if not Lv_werks is initial.
    if lv_werks EQ 1033.
    move '1002' to <wa_vbap>-werks.
    if sy-subrc eq 0.
      xvbap-werks =  <wa_vbap>-werks.
    modify xvbap from <wa_vbap> .
    endif.
    elseif lv_werks EQ 1003.
    move '1003' to <wa_vbap>-werks.
    elseif lv_werks EQ 1010.
    move '1010' to <wa_vbap>-werks.
    endif.
    endif.
    endif.
    endif.
    endif.
    endloop.
    endif.
    Regards,
    Sudhakar Reddy.A

    You have to use the form routine "USEREXIT_SAVE_DOCUMENT_PREPARE"
    regards
    Vinod

Maybe you are looking for