Item properties - heading - changing

Hi,
Is there any way to change the heading in item properties without runninig the report first?
Thanks.
Leah

Hi,
Yes from the "Format"->"Item Format" in the toolbar
select the item and go to the "Edit Heading"
This way you can change the whole report heading and items format without the need to run it after each change.
Tamir

Similar Messages

  • Report on Purchase order header changes and Line item changes.

    Gurus
    All changes which has been done in Purchase order can be seen in enviroment----Header changes Or Item changes for a particular PO.
    Now end user want to see the changes made in all the purchase orders for a particular project in specified date range.
    Suppose there are total 100 POs placed in one month for a particular project. End user want to see the changes MADE (IF ANY) in above POs
    Is there any standard report is available to this effect OR it is z development
    Atul

    HI ,
    This report can easily be written useing the tables EKKO and EKPO
    First get the PO's created in that date range.
    From there get the change document numbers with this extarct the date from CDHDR and CDPOS tables.
    regards,
    Lalita

  • Changing stereo to mono pair in ITEM PROPERTIES

    I know that you can unlink stereo pairs in the timeline, but I would like to unlink the stereo pair of the master clip in the browser so that I can change the levels for the entire clip for each channel separately before I begin editing (one is a boom mic, the other a lav). Under Item Properties the clips have the audio listed as stereo pair, but I can't change it. If I click on the clip in the browser and go to modify "unlink audio" is greyed out. It seems that you can't change the audio linking of a master clip. Otherwise I have to lay a clip into the timeline, unlink the audio, change the levels for each channel, and then copy/paste that to all the other clips after I lay them into the timeline. Am I missing an easy way to do this? Any help is appreciated

    I don't think you can do it the way you intend, but there is a work around. Take all your clips and dump them completely into new sequence (no ins/outs). Unlink the stereo pairs all at once by hitting CMD+A and then OPT+L. Adjust the Pan of one of the audio clips to center. Copy that clip (CMD+C) and Paste the Attributes (OPT+V) to all the clips in the sequence.
    Now all the clips in the timeline should be 2-mono and panned center.
    In the browser, create a bin (to keep separate from original clips). Select all the clips in the timeline (CMD+A) and drag them into the new bin. That will create new master clips with mono audio instead of stereo pairs.
    Andy

  • How to dynamically changes items properties

    How to dynamically changes items properties likes position order in tabular view, width, prompt

    Many object properties can be set programmatically at runtime. For example, each window object has a Visible property that can be set to either Yes or No to show and hide the window. At runtime, you can call the built-in procedure SET_WINDOW_PROPERTY to show or hide the window dynamically, as shown here:
    Set_Window_Property('my_window',VISIBLE, PROPERTY_ON);
    The following built-in procedures are available for setting object properties at runtime:
    -     SET_BLOCK_PROPERTY
    -     SET_CANVAS_PROPERTY
    -     SET_FORM_PROPERTY
    -     SET_ITEM_PROPERTY
    -     SET_LOV_PROPERTY
    -     SET_MENU_ITEM_PROPERTY
    -     SET_PARAMETER_ATTR
    -     SET_RADIO_BUTTON_PROPERTY
    -     SET_RECORD_PROPERTY
    -     SET_RELATION_PROPERTY
    -     SET_VIEW_PROPERTY
    -     SET_WINDOW_PROPERTY
    The built-in procedure SET_ITEM_PROPERTY can be used to set the properties of any type of item, including buttons, text items, check boxes, radio groups, etc.
    Note: Radio group items include individual radio buttons; use SET_ITEM_PROPERTY to set the properties of the radio group, and SET_RADIO_BUTTON_PROPERTY to set the properties of the individual buttons in the group.
    Each built-in SET procedure has a corresponding GET function that allows you to programmatically determine the current setting of an object's properties. The following example uses GET_WINDOW_PROPERTY to determine if a window is currently hidden (VISIBLE = FALSE). If the window is hidden, SET_WINDOW_PROPERTY is called to show the window.
    If Get_Window_Property('my_window',VISIBLE) = 'FALSE' THEN
    Set_Window_Property('my_window',VISIBLE,PROPERTY_ON);
    To determine if a particular property can be set programmatically, refer to the property descriptions in online Help.

  • Item line heading

    Hi,
    i need to print item line heading for each new page.
    I have only one window, main in the page and i have line items in the same window. I'm trigerring different sections using text elements. when the line item doesn't fit in the page its getting printed in the next page, which is the desired funct.
    however, when it goes to the next page , i need to print item header for every new page. can someone let me know how i can do this with out making any changes to the layout.
    Thanks,
    kumar.

    this can be done in different ways...
    If you can modify the layout create a window and place the headings in this new window and call this window in all form pages.
    If you can modify the driver program, it can be done by using text elements.
    if you don't want to modify layout and program, try this below code...
    place your item hedings in main window...
    apply the follow ing logic...
    Example..
    if &temp& NE &nextpage&
    flag = 'Y'.
    endif.
    If flag = 'Y'.     " note set flag = 'y' for first time
    temp = page.
    Headings goes here
    flag = 'N'.
    endif.
    ***line items goes here.....
    try the rough example given above. close the thread once your question is answered.
    Regards,
    SaiRam

  • User manipulation of web item properties

    Hi everyone,
    I have a requirement from a client where they want to be able to dynamically manipulate web item properties, more specifally they want to change the number of columns of a report displayed on the web.
    For instance, lets say I have a web template that has a query assigned to it and displays a report. In the bex web designer, you can set the number of columns displayed in the properties section of the web item. I want to be able to change this property directly from the web with the help of a drop down box.
    Is it possible to do this, and if so, how?
    I have tried to search the forums for a similar questions but with no luck.
    Thanks!!
    best regards,
    Dionisios

    Hi,
    Are you referring to the Table item property named DATA_COLUMN_TO? Aren't you able to change it by adding it at the end of your url with the desired value?
    If you need to add a button or a new context menu entry then you will need to add some javascript to your web template.
    Please, check how to guide about adding a new context menu entry (How to enhance context menu).
    Hope it helps,
    David.

  • Frieght condition in item wise & Header wise.

    Dear sir,
    I have defined a fright condition FRB1 . I have created this condition type as both header wise & item wise in M/06
    also selected C for manual entry .
    but now when i am giving fright condition suppose 200 in header in distribute  value 50 in all 4 line item.
    now i want to change in 3rd line item so that time  this fileds come gray.
    please guide me how i can change this condition in item  for one particular line item.

    Hi,
    If you want to distribute the Freight condition from header input to equal to each line item in item level.You have to tick the item and header condition in frt cond type and tick for group condition.
    If you want to change the frt cond in any line item after distributuin of frt in each line item it is not possible as the cond value flows from header level to each item, so you cannot change the same for one particular line item.
    So better remove the tick for header and make the codn as item only so that you can add the cond value for which ever line item

  • Web Item Properties cannot be displayed in WAD

    Hi,
    I cannot see the web item or template properties in the WAD. I have ticked the flag for the web item properties to be displayed.
    This seems to be user specific, if I login as another user, the properties work area is visible and as well can be selected or deselected for display.
    I am new to Web reporting so am not sure where to change the parameters to get back the properties work area for me.
    Thanks and regards,
    AW

    Thanks a Lot guys,
    Its really strange that the issue seems fixed on itself. Today I  have logged into the system and found everything in order.
    Now I can see the properties pane in WAD and as well select/deselect it from the toolbar.
    It seems to be one more SAP mystery!!!!
    Once again thanks a lot for your contributions. Have assigned points each one of them.

  • Anamorphic flag in FC for title item properties

    I've been trying to figure out how to get my titles to be anamorphic. I shoot it widescrenn 16:9, so all my FCE sequences are set to that.
    I noticed some people change their title project properties to have a 1.25 pixel aspect ratio and then import it to FCE and then select item properties and set an "anamorphic flag."
    HOW do you do this? When I select project properties for my live type title I can see the properties but I can't change anything but the title of the file. Everything else is grayed out.
    How do I flag a LT file in FC to be recognized as anamorphic in FCE?
    I'm using FCE HD 3.5

    In LiveType open the project properties with Command Zero. There will be a field for pixel aspect ratio. If this is greyed out there must be another issue. Is the file locked or in use by another application?

  • FCP Item Properties

    Hi, I'm making a music video bound for the internet shooting on a DVX100B in PAL progressive (25fps) in squeeze mode (anamorphic).
    Now in final cut pro I was wondering what the best settings were in the item properties tab. Also if I change the sequence item properties settings will it change all the clips I've used in that sequence (the stuff in the timeline) or will I have to change each clip individually in the timeline?
    So the following settings are (for the sequence):
    Vid rate: 25fps
    Frame Size: 720x576
    Compressor: DV PAL
    Pixel Aspect: CCIR 601 (should I change this to square and if so why?)
    Anamorphic: (no tick)
    Field Dominance: Lower (Even) (Should I change this to none and if so why?)
    Thanks for any advice on the following query. Any info at all on how and why I should change the above settings would be great. I'm also using compressor after this so could I make all these changes in compressor instead of in FCP, or is it best to change them here first as well?
    Thanks again
    Kev

    Kev,
    Changing the sequence settings won't change clip properties.
    Pixel Aspect: Don't change
    ANamorphic: Do Tick
    Field: Lower
    Consider changing to Pro Res SD rather than DV.
    I'd rather work with the correct settings in FCP so I could get reasonably accurate feedback on what I was editing. Export as QT Movie Current Settings. Bring into COmpressor as source file for a job/batch. Use Compressor to transcode. Start with one of the QT download presets and adjust bit rate and frame controls until you're satisfied.
    Good luck.
    Russ

  • Is it possible to know if an item value has changed

    Hi,
    I'm working on a form and need to know if an item value has changed without compare it with database_value of get_item_property. there is a button <save> on the form and i want to know when user click again and again on button save if this item value has changed. thanks for your ideas.

    Tabit7 - Posted: Apr 9, 2011 12:15 AMbut sometimes in query mode, the item is not navigable and its vallue changed and the prev_value did not work, perhaps the w-n-i-i do not fire>
    If you look up the trigger in the Forms Help system it will tell you if the trigger will fire in Query Mode. The WNII trigger will file in Query Mode where as the Pre-Text-Item trigger does not.
    i try an other way and it seems to work, i put a flag in w-v-i when database_value is different from block value and use this flag in button Save, thanks a lot for your idea it put me in the way. Glad you were able to find a way to resolve your issue. ;-)
    HamidHelal - Posted: Apr 10, 2011 9:27 AM can you please give an example of u'r idea ? >
    First, create a variable that is visible to the entire form. Many people would simply use a GLOBAL variable, but I do not like the limitations of GLOBALs and I don't like the fact that they are visible to the entire Forms sessions, not just my form. I prefer to use a Forms program unit (PU) Package Specification so I can explicitly define the variable data type (eliminates the need to cast the GLOBAL to the correct data type) and the variable only occupies the amount of memory needed to support the variable. Also, when I exit my form, the variable is automatically erased.
    /* Sample Forms PU Package Specification */
    PACKAGE Form_vars IS
       g_prev_val   VARCHAR2(50);
    END Form_vars;No that I've created a variable to store the Previous Value of an Item, I can write code to use it. I will use a Form Level When-New-Item-Instance (WNII) trigger to ensure I capture the value exiting value of the item before any changes.
    /* Sample WNII trigger */
    BEGIN
       Form_vars.g_prev_val := Name_in(:system.trigger_item);
    END;This is a very simple example. There are many other ways to implement this method; such as using the Pre-Text and Post-Text-Item triggers as Abdetu suggested.
    Craig B-)
    If someone's response is helpful or correct, please mark it accordingly.

  • ITEM CREDIT PRICE CHANGED

    Hello Gurus,
    We have an issue in sale order. It is like this. When we change the confirmed quantity in the sales order the item price is changing by few decimals. When we searched for notes we found in one note that it is system standard behaviour. But we asked SAP to check the issue in our system.
    In the example sales order from the production system the change log mentions that item credit price is changed in VKM4 but we could not replicate the same in quality system. We could only replicate the change in VA02.
    Now my question is how can we make any changes in the sales order from t-code VKM4
    Can anybody suggest me.
    Regards
    Prabhu

    Generally, In the change log the system takes,  the base transaction which is used. when we use VKM3/VKM4 the system goes into the sales order and makes the relavant changes like status change etc. The change mode of the sales order is called inside the VKM4 transaction.
    This is applicable to any transaction,  if you are using any FM to change the data in the sales order,the system shows SE37 as the transaction code used..

  • How can I have the pricing conditions at the item and header level of the d

    How can I have the pricing conditions at the item and header level of the delivery? There exist "condition" tabs both the header and the item level of the delivery but the contents of the tabs are empty. I'll be happy if you can help me. Thanks in advance....

    Hi
    If you want to have the pricing procedure at delivery level then you need to assign a pricing procedure at delivery level also
    Just go through the path to maintain the pricing procedure at delivery level.
    IMG -> Logistics execution -> Shipping -> Basic Shipping Functions -> Pricing -> Pricing Procedure. for Delivery.
    But can you be more clear if the above one is not your query ?
    Regards
    Srinath

  • How to build a query to get the item properties is tick or not?

    hello everybody. i'm 1 of the sap b1 user. i face a problem in build a query to check one of the item properties is tick or not? pls help...

    Hi Grace,
    your query could look like this:
    Select itemcode from oitm where qrygroup1= "Y"
    qrygroup1 is item property 1, qrygroup2 is item property 2 etc.
    Regards
    Ad

  • Header Changes History in PO not updated

    Dear SAP Experts,
    I have a problem related to Purchase Order.
    When I updated the PO price via conditions tab in PO header level (i.e. I deleted a condition type for discount), the changes is not recorded in the PO header changes history.
    Can you advise why the changes is not recorded in the PO header changes history?
    Thank you.
    -rumata-

    Hi
    That change could be done in Pricing Procedure
    while creating pricing procedure we have 4 steps such as
    1.condition table
    2.access sequence
    3.condition type
    4.calculation schema
    in the condition type we can omit the condition types
    regards,
    senmani

Maybe you are looking for