Item Relationship for Obsolete Items

This is a question for EBS R12.1.3 - OM/Inventory setups
We have a process where once an item is determined to be phased-out, we set up an item relationship for an active item that will be replacing the product we no longer want to produce. My issue is that once we consume all of the phased-out product, we uncheck the "Customer Orders Enable" flag on the item master so that it can no longer be ordered. The problem is that if the item isn't orderable, we can't pull the item up on the OE form to see it's replacement. This leaves our customer service blind to the product they should be selling.
Does anyone have a recommendation for OM or Inventory setups that would allow us to see the Item Relationship on the OE Form, but not allow orders to be placed for the obsolete item? Not sure if it matters, but we do use the OM materialized views with Item Orderablility feature.

I created an SR with Oracle. They stated that this is not possible and is being considered as an enhancement request.
Bug 6612972: INACTIVE ITEM NOT SHOWN IN LOV WHEN ORDERING SUPERCEDED ITEMS
Bug 14013746: ITEM SUBSTITUTE DOESN'T WORK FOR OBSOLETE ITEM

Similar Messages

Could Not Establish trust relationship for the SSL/TLS secure channel Sharepoint Web services

I am trying to updateList items into a sharepoint list from the xml document stored in my shared drive in remote server. To make that work i wrote down a Powershell Script that utilizes Sharepoint Webservices Api Updatelistitems function to perform the acitivity.
I ran the script over in Dev environment it works, Then i went into QA that Works too. At last i am now in PROD and agains ran the script i am now receicing following error:
New-WebServiceProxy : The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel
All of my servers dev, QA and PROD web apps are encrypted by Https 443 using Cerified root certificate. Powershell script i am running are mirror copy. System accoutn i am using has owner privileages to sharepoint site and its list.
Am i missing something here, what is blocking this traffic i have no clue.
Thank You

are u using self singed certificate?
also check this http://www.poshpete.com/powershell/new-webserviceproxy-and-ssl
http://www.brainlitter.com/2012/03/13/sharepoint-2010-and-cert-trust-could-not-establish-trust-relationship-for-the-ssltls-secure-channel/
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

Partner Relationship for Product

Hi,
I have added partner relationship for product with specific start/end dates values (In my case, I added driver relationship for vehicle through CIC0 transaction).
Through transaction only date (without time) is displayed, while in database the fields DATE_FROM, DATE_TO are stored as timestamps (Which means both date and time value).
I want to manage the relationships in lower level and allow different partners of same partner function on the same day, but in different hours.
Is it possible to define the date range of partners relationships as date+time instead of date only, or only date (without time) is being taken into account (and therefore such change is meaningless)?

A few extras, please reward points.
Tables
Access to table information is controlled across the system by GUID values. These are Global Unique Identifiers.
In general:
CRMCxxxx = Customising
CRMTxxxx = Customising
CRMDxxxx = transactional
BUT* = Customer Master
CRMD_ORDERADM_H = Document Header Table
CRMD_ORDERADM_I = Document Line item Table
CRMD_LINK = Lists various link GUIDs, to
access order Information
CRMD_PARTNER = Partner Table
BUT000 = ~KNA1 Customer Master General Data
BUT020 = Address Link Table
ADRC = Address Details (Master Data)
ADRV = Address Details (unique to orders)
CRMC_PARTNER_FT = Partner function Description
PRCD_COND = Pricing Conditions
CRM_JEST = Status Table
COMM_PRODUCT = Materials General Table
SCATTSEG = Valid from/ Valid to
CRMD_SALES = Sales Data
(reference data)
CRMD_SCHEDLIN = Schedule Line item
CRMD_ORGMAN = Organisational Data
CRMD_PRODUCT_I = Line item product detail
PROCESS_QTY_UNIT (EUR)
Example: You want to list all complaints that partner no 31 appears as a header partner, and the partner functions:
Select PARTNER_GUID from the table BUT000.
Get all instances of that partner in the order/partner table:
Select GUID PARTNER_FCT from CRMD_PARTNER
Where PARTNER_NO = BUT000-PARTNER_GUID.
Then get the order guid from the link table:
Select GUID_HI from CRMD_LINK
Where GUID_SET = CRMD_PARTNER-GUID.
Get the Order No:
Select OBJECT_ID from CRMD_ORDERADM_H
Where GUID = CRMD_LINK-GUID_SET.
Link Table:
_HI refers to a Order Header or Order Line Item
GUID_HI = Header/ Line item Guid
OBJTYPE_HI = 05 = Header
06 = Line item
_SET refers to the subset of data
GUID_SET = Subset GUID
OBJTYPE_SET = 07 = Partners
11 = Sales
21 = Orgman
29 = Subject

What is the relationship for infotype 5151 5152 and 5131?

What is the relationship for infotype 5151 5152 and 5131?
How to add/delete support group for a requisition, a talent group, application groups, applications, or agencies?

Okay, you mean I can also assign individual team members to a support team by adding record in infotype 5131; and
The data for a support group is stored in Infotype 5151 and 5152 which will be maintenance by administrator.
How to interpret information using Infotype 5151 and 5152?
Exp,
1. The support group is assign for which requisition,talent group, application group, application, or agency
2. List of member of each support group.
As the only common field which can link both table is ROLE field. Which i think it is not unique enough to get information for above 2 items.
Any comments will be greatly appreciated!

Multiple relationship for the same field

Hello !
I have this situation :
Table : Article
Id
name
category
Table : Services
id
name
nr
value
Table : Sell_item
Id
item_id
quantity
price
value
Now the problem is this : The field Item_id on the sell_item table can be the id for an Article or a Service. So I need to create a double relationship for this field one with Article table an one with Service table.
Is this possible ?
If not , or if I'm wrong how can I solve this situation ?
Thank you.

Hello,
Please try the following resource:
http://stackoverflow.com/questions/10253986/sql-foreign-key-issue-with-2-parent-tables
The resource offers you 3 options.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

TF215097: An error occurred while initializing a build for build definition : Could not establish trust relationship for the SSL/TLS secure channel

Hello,
We are facing an issue when triggering a new build using TFS 2013 Update 4, VS2013 Update 4 using TFVCTemplate.12.XAML template. All our other older build definitions just work fine but not the TFVCTemplate.12.XAML. It seems to me that some certificate
might be invalidated. Can anyone please point me in the right direction?
Thanks,
Mitul
TF215097: An error occurred while initializing a build for build definition :
Exception Message: One or more errors occurred. (type AggregateException)
Exception Stack Trace: at System.Threading.Tasks.Task`1.GetResultCore(Boolean waitCompletionNotification)
at Microsoft.TeamFoundation.Build.Client.FileContainerHelper.GetFile(TfsTeamProjectCollection projectCollection, String itemPath, Stream outputStream)
at Microsoft.TeamFoundation.Build.Client.FileContainerHelper.GetFileAsString(TfsTeamProjectCollection projectCollection, String itemPath)
at Microsoft.TeamFoundation.Build.Client.ProcessTemplate.Download(String sourceGetVersion)
at Microsoft.TeamFoundation.Build.Hosting.BuildControllerWorkflowManager.PrepareRequestForBuild(WorkflowManagerActivity activity, IBuildDetail build, WorkflowRequest request, IDictionary`2 dataContext)
at Microsoft.TeamFoundation.Build.Hosting.BuildWorkflowManager.TryStartWorkflow(WorkflowRequest request, WorkflowManagerActivity activity, BuildWorkflowInstance& workflowInstance, Exception& error, Boolean& syncLockTaken)
Inner Exception Details:
Exception Message: An error occurred while sending the request. (type HttpRequestException)
Exception Stack Trace: at Microsoft.VisualStudio.Services.WebApi.VssHttpRetryMessageHandler.<SendAsync>d__1.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at System.Runtime.CompilerServices.ConfiguredTaskAwaitable`1.ConfiguredTaskAwaiter.GetResult()
at Microsoft.VisualStudio.Services.WebApi.HttpClientExtensions.<DownloadFileFromTfsAsync>d__2.MoveNext()
Inner Exception Details:
Exception Message: The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel. (type WebException)Exception Stack Trace: at System.Net.HttpWebRequest.EndGetResponse(IAsyncResult asyncResult)
at System.Net.Http.HttpClientHandler.GetResponseCallback(IAsyncResult ar)
Inner Exception Details:
Exception Message: The remote certificate is invalid according to the validation procedure. (type AuthenticationException)
Exception Stack Trace: at System.Net.TlsStream.EndWrite(IAsyncResult asyncResult)
at System.Net.ConnectStream.WriteHeadersCallback(IAsyncResult ar)

Hi Mitul,
Thanks for your reply.
It’s strange, if your old build definitions can work using the same TFS Build Server, that indicate your TFS Server configuration is correct and can works. But only new build definition with default TfvcTemplate.12.xaml template cannot build successful.
Please share your TFS Server detailed environment information here. And share your
Build Service Properties dialog screenshot here.
Try to clean the Cache for TFS 2013 manually(delete the content of the folder only, not the cache folder itself):
Clean the Cache folder on Server machine. The folder path is:
C:\Program Files\Microsoft Team Foundation Server 12.0\Application Tier\Web Services\_tfs_data.
After cleaned, on Server machine, click Start and select
Run… to open the dialog box, then input iisreset.exe and click OK, wait it run completely.
Additionally, you can run the TFS 2013 Power Tools BPA to scan the installation of your TFS Server.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

WSUS Sync is not working Sync failed: UssCommunicationError: WebException: The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel. --- System.Security.Authentication.AuthenticationException: The remote

I know there are loads of posts with same issue and most of them were related to proxy and connectivity .
This was case for me as well (few months back). Now the same error is back. But I've confirmed that FW ports and proxy are fine this time around.
server is configured on http port 80
ERROR
Sync failed: UssCommunicationError: WebException: The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel. ---> System.Security.Authentication.AuthenticationException: The remote certificate is invalid
according to the validation procedure.~~at System.Web.Services.Protocols.WebClientProtocol.GetWebResponse(WebRequest request). Source: Microsoft.SystemsManagementServer.SoftwareUpdatesManagement.WSyncAction.WSyncAction.SyncWSUS
I've checked proxy server connectivity. I'm able browse following site from WSUS server
http://catalog.update.microsoft.com/v7/site/Home.aspx?sku=wsus&version=3.2.7600.226&protocol=1.8
I did telnet proxy server on the particular port (8080) and that is also fine.
I've doubt on certificates, any idea which are the certificates which we need to look? And if certificate is expired then (my guess) we won't be able open the above mentioned windows update catalog site?
Any tips appreciated !
Anoop C Nair (My Blog www.AnoopCNair.com)
- Twitter @anoopmannur -
FaceBook Forum For SCCM

Hi Lawrence ! - Many thanks for looking into this thread and replying. Appreciate your help.
Your reply ("SSL is enabled/configured, and the certificate being used is invalid
(or the cert does not exist or cannot be obtained), or the SSL connection could not be established.") is very helpful.
I've already tested CONTENT DOWNLOAD and it's working fine. WSUS Sync was also working fine for years with proxy server configured on port (8080) and WSUS server on port 80.
My Guess (this is my best guess ;)) is this something to do with Firewall or Proxy side configuration rather than WSUS. However, I'm not finding a way to prove this to proxy/firewall team. From their perspective all the required port communication open and
proxy server is also reachable. More over we're able to access internet (Microsoft Update Catalog site) over same port (8080).
Any other hints where I can prove them it's a sure shot problem from their side.
Thanks again !!
Anoop C Nair (My Blog www.AnoopCNair.com)
- Twitter @anoopmannur -
FaceBook Forum For SCCM

Reporting services with R2 on DPM2012 - Could not establish trust relationship for the SSL/TLS secure channel

Hi everyone,
A somewhat similar question has been asked before by others but none of the answers given has helped me.I am attempting a DPM 2012 installation, which is failing at the "deploying reports" stage.My analysis of logs seems to point me in the direction of an SSL
error, which does not make sense since the configuration files say SSL is disabled (or at least, should be).
Here are the symptoms:
1.I am able to browse http://FQDN/Reports_MSDPM2012 folder from internet explorer
2.I am also able to browse http://FQDN/ReportServer_MSDPM2012 from internet explorer
3.The information given in the logs and relevant config files is shown below:
<<RSREPORTSERVER.CONFIG>>
<ConnectionType>Default</ConnectionType>
<LogonUser></LogonUser>
<LogonDomain></LogonDomain>
<LogonCred></LogonCred>
<InstanceId>MSRS10_50.MSDPM2012</InstanceId>
<InstallationID>{d9b1c335-5842-4a81-9148-79184c38bf09}</InstallationID>
<Add Key="SecureConnectionLevel" Value="0"/>
<Add Key="CleanupCycleMinutes" Value="10"/>
<Add Key="MaxActiveReqForOneUser" Value="20"/>
<Add Key="DatabaseQueryTimeout" Value="120"/>
<Add Key="RunningRequestsScavengerCycle" Value="60"/>
<Add Key="RunningRequestsDbCycle" Value="60"/>
<Add Key="RunningRequestsAge" Value="30"/>
<Add Key="MaxScheduleWait" Value="5"/>
<Add Key="DisplayErrorLink" Value="true"/>
<Add Key="WebServiceUseFileShareStorage" Value="false"/>





<Add Key="WatsonFlags" Value="0x0428"/>
<Add Key="WatsonDumpOnExceptions"
4.The DPM log file still appears to be using SSL even though i used reporting services configuration to remove SSL bindings:
running.Microsoft.Internal.EnterpriseStorage.Dls.Setup.Exceptions.BackEndErrorException: exception ---> Microsoft.Internal.EnterpriseStorage.Dls.Setup.Exceptions.ReportDeploymentException:
exception ---> System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.Net.WebException: The underlying connection was closed: Could
not establish trust relationship for the SSL/TLS secure channel. ---> System.Security.Authentication.AuthenticationException:
The remote certificate is invalid according to the validation procedure.
at System.Net.Security.SslState.StartSendAuthResetSignal(ProtocolToken message, AsyncProtocolRequest asyncRequest,
Exception exception)
5:I do have an SCCM site on the default web site used by SMS clients but on different ports
I am stumped.Somebody please give some advice
Thank you

Hi
This is an old post but did you come right?

SSRS Report Server Could not establish connection. The underlying connection was closed. Could not establish trust relationship for the SSL/TLS Secure channel

Hi
Had to un-install and then re-install MS SQL Server 2012 with SSRS.
After we re-installed we are able to get to the Web Services page but not the Report Server page and get the above error message. We need to use SSL and when we bind the cert in RS Configuration Manager it says it does this successfully on the WebServices
tab. We also do a similar exercise on the ReportServer page.
Any help warmly welcomed :D
Thanks

Hi Rich Whight,
According to your description, after you re-installed SQL Server 2012 with SSRS, you are able to access Web Service URL, but when you tried to access Report Manager URL, the error occurred: The underlying connection was closed. Could not establish trust
relationship for the SSL/TLS Secure channel.
The issue may be caused when the certificate isn't installed correctly in the trusted root for the local computer. To verify and install the certificate, Please refer to the steps blow:
In RsReportServer.config file(default location: C:\Program Files\Microsoft SQL Server\MSRS11.MSSQLSERVER\Reporting Services\ReportServer), change the “SecureConnectionLevel” element value from 0 to 3.
Add correct value to <UrlRoot> element.
Add the same value to the <ReportServerUrl> element as step2.
Go to Microsoft management Console, add the certificate which you use to access the report server under “Trusted Root Certification Authorities”.
For more information about SSL configuration and Managing Trusted Root Certificates, please refer to the following documents:
http://blogs.msdn.com/b/mariae/archive/2007/12/12/ssl-configuration-and-reporting-services.aspx
http://technet.microsoft.com/en-us/library/cc754841.aspx
If you have any more questions, please feel free to ask.
Best Regards,
Wendy Fu

Replacement for Obsolete Payroll schemas 'KARMC' and 'XEDT' in ECC 6.0

Hi Experts,
I am working in a upgradation project. In HR Module (Payroll schema). Any one can help me out what are the replacement for obsolete payroll schemas 'KARMC' and 'XEDT' in ECC 6.0. (These two are there in 4.6C but, not in ECC 6.0)
Thanks in Advance,
Ramesh.

Hi Experts,
I am working in a upgradation project. In HR Module (Payroll schema). Any one can help me out what are the replacement for obsolete payroll schemas 'KARMC' and 'XEDT' in ECC 6.0. (These two are there in 4.6C but, not in ECC 6.0)
Thanks in Advance,
Ramesh.

Can't establish trust relationship for VM hosted SSRS Service

We are developing an Azure application that requires SSRS for report generation. Currently we are using the Azure SSRS service, and that is working great. Unfortunately, Microsoft is discontinuing that service this fall. So we have two options -- use a VM
with SSRS or switch to some other reporting product. For testing the latter approach I have set up a vm with SSRS over SSL. I created a self-signed certificate on the vm (xxx.cloudapp.net) and set it up to allow access from any IP
for testing. I installed this cert on my dev box (computer account in both personal and trusted authority). I am able to access https://xxx.cloudapp.net/ReportServer and .../Reports
from my local browser. I can generate reports without problems.
However, after uploading the xxx.cloudapp.net certificate to my cloud service, I find that service is unable to access SSRS. I get the error: "The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure
channel." I'm guessing that the vm knows it has the certificate, but doesn't trust the source authority. I can't find any way in the Cloud Service UI to change that.
So, summarizing, the SSRS can be accessed remotely via SSL if I install the cert on my local machine. But I can't get the cloud service to work when I do that. What do I need to do? I'm not crazy about setting up a production vm with a
non-cloudapp.net name and going to a certificate authority to get a certificate just to test. And I don't know if that would work any better.
Any advice will be greatly appreciated.
Thanks,
Terry
TerryL

Hi Jambor:
I have already installed the self-signed certificate in personal for the local machine, also in the trusted root certification authority section. I am using the instructions at
http://msdn.microsoft.com/en-us/library/dn449661.aspx in the section labeled "To use the Virtual Machines Self-signed Certificate". If I install the certificate on my local
machine in both the personal and the trusted authority section, I am able to deploy to SSRS via https. I can also browse to
https://xxx.cloudapp.net/Reports and generate reports. Therefore I think the VM and SSRS are OK.
I believe my problem comes when I try to call the SSRS service from a free-standing Azure cloud service unrelated to my vm. I can import the certificate to the cloud service, but there is no way in the UI to tell the cloud service to trust my xxxx.cloudapp.net
certificate authority. I imagine there is a vm sitting underneath, but I can't access it to add the certificate to make xxx.cloudapp.net a trusted CA. Consequently, when my cloud service tries to access the SSRS cloud service on the vm, I get the
error "The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel."
The trusted CA idea is just my theory. When I use Azure's soon-to-be-discontinued SSRS service via https it works fine with no certificate.
There has to be a way to make this work, but I can't figure it out.
Thanks,
Terry
TerryL

Set-IRMConfiguration failed with error "Cou ld not establish trust relationship for the SSL/TLS secure channel."

Hi, experts
I'm trying to configure a lab environment according tutorial http://www.msexchange.org/articles-tutorials/exchange-server-2010/compliance-policies-archiving/rights-management-server-exchange-2010-part3.html
After completing configuration, I execute cmdlet Set-IRMConfiguration -InternalLicensingEnabled $true, but get error
The remote certificate is invalid according to the validation procedure. ---> The underlying connection was closed: Cou
ld not establish trust relationship for the SSL/TLS secure channel. ---> Failed to get Server Info from https://exhv-65
94/_wmcs/certification/server.asmx.
+ CategoryInfo : InvalidOperation: (:) [Set-IRMConfiguration], Exception
+ FullyQualifiedErrorId : C810E449,Microsoft.Exchange.Management.RightsManagement.SetIRMConfiguration
Then I run cmdlet Test-IRMConfiguration -Sender [email protected] and get error
Results : Checking Exchange Server ...
- PASS: Exchange Server is running in Enterprise.
Loading IRM configuration ...
- PASS: IRM configuration loaded successfully.
Retrieving RMS Certification Uri ...
- PASS: RMS Certification Uri: https://server1/_wmcs/certification.
Verifying RMS version for https://server1/_wmcs/certification ...
- WARNING: Failed to verify RMS version. IRM features require AD RMS on Windows Server 2008 SP2 with the
hotfixes specified in Knowledge Base article 973247 (http://go.microsoft.com/fwlink/?linkid=3052&kbid=973247)
or AD RMS on Windows Server 2008 R2.
Microsoft.Exchange.Security.RightsManagement.RightsManagementException: Failed to get Server Info from https:
//server1/_wmcs/certification/server.asmx. ---> System.Net.WebException: The underlying connection was clos
ed: Could not establish trust relationship for the SSL/TLS secure channel. ---> System.Security.Authenticatio
n.AuthenticationException: The remote certificate is invalid according to the validation procedure.
at System.Net.Security.SslState.StartSendAuthResetSignal(ProtocolToken message, AsyncProtocolRequest async
Request, Exception exception)
at System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest async
Request)
at System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest)
at System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest async
Request)
at System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest)
at System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest async
Request)
at System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest)
at System.Net.Security.SslState.ForceAuthentication(Boolean receiveFirst, Byte[] buffer, AsyncProtocolRequ
est asyncRequest)
at System.Net.Security.SslState.ProcessAuthentication(LazyAsyncResult lazyResult)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Obje
ct state)
at System.Net.TlsStream.ProcessAuthentication(LazyAsyncResult result)
at System.Net.TlsStream.Write(Byte[] buffer, Int32 offset, Int32 size)
at System.Net.PooledStream.Write(Byte[] buffer, Int32 offset, Int32 size)
at System.Net.ConnectStream.WriteHeaders(Boolean async)
--- End of inner exception stack trace ---
at System.Web.Services.Protocols.WebClientProtocol.GetWebResponse(WebRequest request)
at System.Web.Services.Protocols.HttpWebClientProtocol.GetWebResponse(WebRequest request)
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at Microsoft.Exchange.Security.RightsManagement.SOAP.Server.ServerWS.GetServerInfo(ServerInfoRequest[] req
uests)
at Microsoft.Exchange.Security.RightsManagement.ServerWSManager.ValidateServiceVersion(String featureXPath
--- End of inner exception stack trace ---
at Microsoft.Exchange.Security.RightsManagement.ServerWSManager.ValidateServiceVersion(String featureXPath
at Microsoft.Exchange.Management.RightsManagement.IRMConfigurationValidator.ValidateRmsVersion(Uri uri, Se
rviceType serviceType)
at Microsoft.Exchange.Management.RightsManagement.IRMConfigurationValidator.TryGetRacAndClc()
OVERALL RESULT: PASS with warnings on disabled features
From the error message, this issue seem to related with SSL/TLS connection. So I go back to check configuration and find out a difference to tutorial. Current SCP url is https://server1/_wmcs/certification, but in tutorial it is https://server1:433/_wmcs/certification.
On my opinion, I don't think it is the real reason.
So, how can I resolve this error? Could you give me some suggestion? Thanks in advance.
System Info:
Windows Server 2008 R2 + Exchange Server 2010 SP3 RTM

Hi
Please have a try with the solution on this KB article
“Error message when you try to test access from the Microsoft Dynamics CRM E-mail Router: "Incoming Status: Failure - The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel"”
http://support.microsoft.com/kb/954584/en-us
Cheers
Zi Feng
TechNet Community Support

The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel.

I tried to redeem a digital download copy of a movie and was presented the following error:
The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel.
Any guesses on what it is and how to resolve it?
Thanks

Hi
Abhilash Francis,
Could you tell us your scenario? What's your project? Is it a WCF service?
Looks like this is not a code issue.
Just from the error information,
it seems that you do not configure the service certificate very well so as to Server was unable to process request.
I am not completely sure what the real scenario is, but it might be a problem of that It is a WCF services application, please check these following articles to configure the service certificate.
If not, please feel free to let me know.
How to: Configure an IIS-hosted WCF service with SSL
Could not establish trust
relationship for the SSL/TLS secure channel
Hope this helps.
Best regards,
Kristin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

"Could not establish trust relationship for the SSL/TLS secure channel"

During the configuration of DUET_E , when calling the DUET Application from SharePoint, the following error is shown :
"Could not establish trust relationship for the SSL/TLS secure channel with authority 'MYSAPNW702SERVER:8001'"
I have already seen the Post :
Error in DUET Configuration at SSL
This mentions the error, but does not provide any answers on resolution.
The DUET_E troublshooting guide suggests that the SAP Standard SSL Certificate is added to SharePoint Central Admin > Security > Manage Trusts
This has also been done.
We are using the Standard SAP SSL Self signed certificate - not one signed by an external CA.
Can anyone provide any guidance ?
Thanks in advance.

Hi Min,
reading through your first post the problem might be the CN of the certificate. If you used the Wizard or the default way to create a self signed certicate, it is probably created with the CN server.domain (the fully qualified name of the server).
However, when you created the BDC models the URLs pointing to the WSDL is probably only the servername (at least that is what I would assume after seeing your error message).
Because of that SharePoint calls the SAP Duet server with the severname, but the certificate presented by the SAP system is not the servername, but the fully qualified servername. Because of that -- although SharePoint trusts the certificate -- the URL and certificate do not match and you get the error "Could not establish trust relationship for the SSL/TLS secure channel with authority 'MYSAPNW702SERVER:8001"
If that is the case you have two options:
1) you go to STRUST and create a new SSL certificate that has a CN of only the servername. Then you export this certificate and trust it in SharePoint
2) or -- and this is the way I would recommend -- you try to adjust the URL used in the BDC model. Usually you get only the servername (and not the fully qualified DNS name) when you have not specified the profile parameter icm/host_name_full. Which URL is currently used when you start transaction SAML2 or SOAMANAGER? If you have not yet set icm/host_name_full, then give this a try.
Regards,
Holger.

Could not establish trust relationship for the SSL/TLS secure channel with authority

Hello everyone, I need to establish a connection between my HTTPS WCF hosted in Windows Azure Web Role and my Windows Store App Client. The service is actually exposed for testing purposes using a self-signed certificate.
I have installed the certificate in Personal and Trusted Root Certification Authorities in Current User and Local Manchine.
In the Windows Store App, I create the service reference pointing to the cloud https service, then edit the manifest and create a new declaration to Add a New Certificate, I checked Exclusive Trust and Auto select, pointing to Root storage name and
my self-signed certificate.cer.
The result is the following exception in the IntelliTrace stack:
Exception:Caught: "The remote certificate is invalid according to the validation procedure." (System.Security.Authentication.AuthenticationException)
A System.Security.Authentication.AuthenticationException was caught: "The remote certificate is invalid according to the validation procedure."
Time: 19/01/2015 04:42:33 p. m.
Thread:Worker Thread[17080]
Exception:Thrown: "Could not establish trust relationship for the SSL/TLS secure channel with authority 'appchallengewhi.cloudapp.net'." (System.ServiceModel.Security.SecurityNegotiationException)
A System.ServiceModel.Security.SecurityNegotiationException was thrown: "Could not establish trust relationship for the SSL/TLS secure channel with authority 'appchallengewhi.cloudapp.net'."
Time: 19/01/2015 04:42:34 p. m.
Thread:Worker Thread[17080]
Appreciate any help, to solve this with the approach of WCF Service Reference in Windows Store App.
Note:
If I call the HTTPS service using a Console App it works very good using the following the code:
ChannelFactory<IAgentService> factory = new ChannelFactory<IAgentService>("basicHttpBinding_IAgentService");
ServicePointManager.ServerCertificateValidationCallback = (sender, cert, chain, error) => true;
IAgentService wcfProxy = factory.CreateChannel();
Thanks in advance,
RC

Maybe not implemented.
https://social.msdn.microsoft.com/Forums/windowsapps/en-US/2dab2818-8f4c-4474-a7a1-db2cbfb40d40/accepting-client-certificate-for-https-connections?forum=winappswithcsharp

Item Relationship for Obsolete Items

Similar Messages

Maybe you are looking for