Item relevant for picking

Where we can can control relevance for picking , despite making all the settings (In the item category and LW M) it is showing that item is not relevant for picking in the delivery?
Regards
Roopak

Hi Roopak,
First goto T.Code:VOV7,Select your order item category.Details.
Check whether it is relevant for delivery or not.
If yes then Goto T.Code:0VLP(Zero VLP),Select yourdelivery item category.
Details.
Under Warehouse control and Packing tab,there is check box for Relevant picking.
Check this box.
Save.
The same you can do in OVLP also.
Here it is direct check box.
You can use either of them.
Save.
Regards,
Krishna.

Similar Messages

  • Relevant for picking or putaway

    Hi, I have problem with deliveries that are WM HU managed( picking is done through TO-s) and in same system I have also normal deliveries. Problem is when I set indicator "Relevant for picking or putaway" in table TVLP-KOMRL as checked, system requests that all items on delivery have status "C"(that are picked through WM), but that is then not OK for normal delivery. When I uncheck this field, then is working for normal deliveries and not for others. How to manage that?
    thx
    mario

    Hi Mario,
    As you can see that the setting 'Relevant for picking/putaway' is configured for Delivery Item category. Perhaps you can consider assigning different Delivery item category for item relevant for picking or the opposite. Hope this helps.

  • Set  item categaries of sales order  is  not  relevant for picking

    dear friends:
       when i created the outbound delivery and must maintain the picking quantity of materails.i change the configration of system so that not nessesary maintain the picking quantity. set  item categaries of sales order  is  not  relevant for picking via t_code:vlop,what it effect .help me analyze it .
    best regards.

    Hello,
    In TA :OVLP   set/reset the indicator according to your requirement.
    In the case of outbound deliveries, only the delivery items that are relevant for picking are transferred to the Warehouse Management (WM) component. Certain items such as text items or service items (consulting activities) are not relevant for picking.(in those cases uncheck the box)
    In the case of inbound deliveries, this indicator controls whether the item is relevant for putaway.
    This indicator must be set in order for the item to be included in a Warehouse Management transfer order and then put away.
    Regards,
    Nisha
    @award pts if helpful.

  • VL06G  item not relevant for picking

    Hi Gurus,
    I have a delivery with a single item that is not relevant for picking and I cannot see it in VL06G.
    I don't understand why.
    In the selection screen the report WS_MONITOR_OUTB_DEL_GDSI has picking status 'C' or Blank.
    So it should display also my delivery, that has picking status = blank
    Thanks for your kind help
    Francesco

    Hello Francesco
    I don't know which version of SAP you are in.
    However I found an OSS note that's relevant upto Version 4.6C, which says the following:
    " However, it is not possible, for example, to include the picking status ' ' (Not relevant) in the selection, because this represents an enhancement of the standard selection range. ".
    I am thinking it may still work the same way as it is a conceptual matter.
    Please review this
    398014 - VL06: Selection criteria for delivery statuses
    I will check if there is a note relevant for ERP 6.0 which says the same thing.
    Hope this helps. Good luck.

  • Item Cat NLN appears not relevant for picking even it is relevant in 0VLP

    Dear Expert,
    We have an issue in on the behavior of the item category we assigned to the replenishment delivery. The transaction starts from an STO-PO and create a replenishment delivery on the background via VL10B. The replenishment delivery was successfully created. The weird thing is, item cat NLN is relevant for picking. I checked the item cat assigned to the replenishment delivery and it shows NLN but it appears as not relevant for picking as picked quantity column is uneditable. Seems weird and this is my first time to encounter such issue. I tried browsing the net and had no luck to find same scenario. Can somebody please tell me what could be the possible cause of this issue? Thank you in advance!
    Kind regards,
    Mark

    Mark,
    Is the inventory warehouse managed or inventory managed? Usually, if you are in an inventory managed scenario, the system lets you directly input a picked quantity directly on the delivery. If you are in a warehouse managed scenario, you have to create a transfer order to do picking. You can check this by looking at field "OverallWMStatus" on the "picking" tab of the delivery. If the status says "WM Transfer Order required" you are in a WM managed scenario and have to carry out picking via a transfer order.
    More information here.
    Otherwise, I am not sure what the issue is!
    Krishna

  • Materials not relevant for Picking

    Hi Guys,
    I have an outbound delivery wherein some of its materials don't have any value for the picked quantity and the materials' picking status says that they are not relevant for picking. Do you guys have an idea on how can I fix this issue??
    Thanks!

    HI,
    As per your above thread, I understand that your delivery has multiple line items with different materials.
    Check whether any of the material is relevant for picking. If yes, then compare the sales views of the materials which are relevant for picking with the ones which are not.
    Hope you can find some differences.
    Also check the transaction 0184 & OVLP.
    Thanks & Regards,

  • Item Relevent for Billing

    Dear Friends,
    there is one Check box saying " relevent for Delivery" at the Defintion of Item and i have the same field alos at the Defintion of Schedule line...
    does any1 know the Diffrence??? or both are same??
    please let me know !!!
    Best regards,
    Lata.

    Item Relevant for Delivery: in T.Code: VOV7 for Item Level
    ·     Indicates whether a text or value item is relevant during delivery processing. That means it will allow the system to create schedule lines for text items.
    ·     Ex.: Manual for the product
    ·     The item itself is not delivered, but serves only for information purposes.
    ·     For example, you can refer to a text item as relevant for delivery so that the system copies it from a sales order into a delivery note.
    Item Relevant for Delivery in T.Code: VOV6 for Schedule Lines
    o     This indicator creates schedule line for a line item in sales order.
    o     Except for text items, for all the other items like standard item etc. this box should be checked.
    o     For text items it should be checked in VOV7 as text items will not have schedule lines.
    o     In order for system to understand that this “item relevant for delivery” in VOV6 is applicable, the “schedule lines allowed” check box in VOV7 should be checked for all the items.
    o     Except for text items for which there are no schedule lines so check box should not be checked.
    o     Schedule lines allowed @ VOV7 should be activated, then Check in Item Relevant for Delivery @ VOV6 will generate delivery.
    o     Indicates whether the item that is related to a schedule line is relevant for delivery.
    o     If a sales order item is relevant for delivery, so are the schedule lines that belong to the item. Schedule lines that belong to an item in a quotation are not relevant for delivery.
    Regards
    AK
    Reward points if helpful

  • Item relev for div

    hi,
    1) may i know what is the use of item relev for div (item relevant for delivery) in VOV7 (define item category). what is the implication if ticked or not ticked.
    2) we have 1 standard item but this standard item category does not select this field in VOV7.
    and in the document flow for document base on this category, i can see there is delivery happens. why?
    thanks

    See, once Item Relevance indicator is on, it just shows that the item will be copied to delv. doc. as text or value item, and it does not have any resemblance to physical delivery, until and unless you select the "Schedule line alowed" indicator on, which is for physical relevance of the delivery.
    Regards,
    Abhishek

  • VL463 -  No distribution: Delivery does not contain items relevant for dist

    Dear Experts,
    When we slect multiple Deliveries from VL06 and distribute, Only few get distributed and others fail.
    The error log shows: VL463 -  No distribution: Delivery does not contain items relevant for distribution.
    However, If I select these deliveries individually or say 4 or 5 deliveries at a time and distribute, deliveries get distributed.
    If I select more nunbers (ex: 12 or more), only 3 gets distributed and others fails with above message?
    Any inputs on this are most welcome.
    Regards,
    Shetty

    Hi,
    Check in OVLK
    Which distribution mode you maintained in delivery type it should be Distribution according to the settings for the warehouse number
    Also check in Logistics Execution --> Decentralized WMS Integration --> Central Processing  --> Application --> Activate Decentralized WMS.
    Kapil

  • How to make Delivery Item Relevant for Proof of Delivery

    Hi,
      How is it possible to make the Delivery Item relevant for Proof of Delivery (POD). What are the configuration settings required?
    Regards,
    Priyanka.

    Hi Priyanka,
    Following is the method to make Delivery Item Relevant for Proof of Delivery:
    1.  SPRO --> Logistics Execution --> Shipping --> Deliveries --> Proof of delivery
    a.Set POD-Relevance Depending on Delivery Item Category
    (In this activity, you can set the proof of delivery (POD) relevance depending on the delivery item category.)
    Put (X) Relevant for POD, for the relevent Item Categories
    b.Define Reasons for Quantity Differences
    (Define how the quantity is to be calculated (add or subtract the difference quantity, depending on whether you are dealing with an overdelivery or an underdelivery for eg. due to damage during transport).
    2. Set the Relevant for POD indicator on the Shipping tab page of the customer with whom you would like to carry out POD-processing.
    Hope it helps.
    Regards,
    Anirban Roy

  • Table for line item relevancy for due list

    Hi all
    i have taken the list of orders from VF04 ,but is there any table where i can check which line item is relavant for Due list for each order?
    Regars
    Phani

    hi Rhani,
    that would be the billing index VKDFS.
    Balazs

  • How to determine if delivery item is relevent for packing

    Hi Experts,
    I have a sales order and a purchase order containing line items.
    I have to create their deliveries.During Creation of Delivery a User-exit and badi's get triggered where i have to code.
    In that i have to determine delivery items relevent for packing.
    Kindly let me know any field or any other way through which i can determine which are the items among all the line items relevant for packing. 
    Thanks!!!!!!
    Shital.

    Try VBUP-PKSTA (space = not relevant, all else is relevant) or the same in XVBUP. Although I'm not sure if it will already be set when your code runs...

  • Items not getting picked up in Return sales order

    Dear all,
    I am creating a return sales order with reference to a sales order.
    In my delivery doc the items can be categorised into 3 types:
    1- Picking done; Movement type determined
    2- Picking done; Movement type not determined
    3- Picking not-done; Movement type determined
    In the return order, only the items of 1st type are coming. Why others not getting picked up? Can they be entered manually?
    regards
    Sapshed

    Dear Hrishikesh,
    Thats Ok. Picking is done only for those items for which Relevant for Picking is ticked.
    What I want to know is that, for items that have either their picking not done or Goods movement not determined, they are not getting automatically picked up while I create a Return order w/r to a sales order.
    thanks
    Sapshed

  • Not relavent for Picking

    Hi,
    1) After Sales order When I am trying to create delivery its automatically showing
    ITEM NOT RELEVENT FOR PICKING.
    2) Its not taking Quantity,
    But item isrelevant for picking,
    Plz can you suggest me
    thanks

    Tiru,
    Check the storage location under which you found the Stock and see whether the delivery is pointing to the same storage location or not..
    If possible try to add the stock into the storage location of the plant that the delivery is pointing to..
    I hope this should resolve your issue..
    Regards,
    Ajai
    Don't forget to reward points if helpful.

  • Error : Delivery does not contain items to be picked

    Hi Exps
    I have created Stock Transport Order (STO) and then Delivery Note with VL10g.
    In Delivery Output EK00 (Picking list Printing ) gets populated along with EKSU (Picking List EDI output).
    But EK00 only turns green and EKSU turns Red saying that "Delivery does not contain items to be picked"
    My Conclusions :
    1) Picking is happening with EK00 due to which EKSU doesnt get any items to be Picked and it fails in creating Idoc.
    I want to make both outputs (EK00 and EKSU) turning green(Successful).
    How can I do this. ?
    Any setting or any other approach welcome.
    <REMOVED BY MODERATOR>
    Regards
    Tulip
    Edited by: Alvaro Tejada Galindo on Feb 13, 2008 4:55 PM

    hi
    First  Check whether the Material in delivery are relevant for picking.
    If yes, then try chaning the order of the Output in the Output procedure fist EKSU then give EK00
    If EK00 is green agreeed , check if any automatic picking is done , becasue once the picking is done then the EDI output is failing.

Maybe you are looking for

  • Re-imaged brand new iMac and no longer boots

    Hiya, I did this in the past and naively did it again!  We use a fairly up to date image that we restore machines with, however on this occasion a new iMac came in and I re-imaged it.  Sad to say, the machine boots up with a slightly turned no entry

  • To do start dates

    I very much wanted to move everything into iCal, being somewhat tired of Now Up-To_Date after all these years. THe problem is, I use To Do's to make sales calls. I will set these to start in two weeks, or three weeks, after I have made the call and b

  • 225 - All incoming mms/sms end up in a folder call...

    Hello! I bought a Nokia 225 for my mum, cause it has a big display and ease of use. I don't live in the same country as her, so I can unfortunately not just pop over and help her when things don't work out. I have bought an extra 8 gb memory card to

  • SPUtility.GetPrincipalsInGroup method throws Thread was being aborted error when SPGroup Name is passed

    Hello, I am getting 'Thread was being aborted - Unable to evaluate expression because the code is optimized or a native frame is on top of the call stack' error when I use 'SPUtility.GetPrincipalsInGroup' method. bool bReachedMaxCount = false; SPPrin

  • UCCX limit duration of calls in Queue

    Hi, How can I redirect a call to another queue after it stays in the first queue for X amount of time? This is to say to limit the duration of a call in the first queue to X amount and then once it reaches that target, it will be redirected to anothe