ITEM_TYPE 'WFSTD' is protected, no changes were saved.

Dear friends,
When I use "WFLOAD $fndunpw 0 Y UPGRADE ./xxcub/import/FAAPPROV.wft |tee -a $LOGFILE" to upload a customization.The error message as follows:
Should the Access level is too low.Need I change the access level using Oracle Workflow Builder?
Access level: 100, Mode: UPGRADE
ITEM_TYPE 'WFSTD' is protected, no changes were saved.
ITEM_ATTRIBUTE 'WFSTD/FORWARD_FROM_DISPLAY_NAME' is protected, no changes were saved.
ITEM_ATTRIBUTE 'WFSTD/N' is protected, no changes were saved.
ITEM_ATTRIBUTE 'WFSTD/REQUESTOR_USERNAME' is protected, no changes were saved.
ITEM_ATTRIBUTE 'WFSTD/OWNER_ROLE' is protected, no changes were saved.
LOOKUP_TYPE 'WFSTD/CRASH_STATUS' is protected, no changes were saved.
LOOKUP_TYPE 'WFSTD/CSTCELU' is protected, no changes were saved.
LOOKUP_TYPE 'WFSTD/CSTGENLU' is protected, no changes were saved.
LOOKUP_TYPE 'WFSTD/EMPLOYEE_ACTION1' is protected, no changes were saved.
LOOKUP_TYPE 'WFSTD/EMP_RESPONSE1' is protected, no changes were saved.
LOOKUP_TYPE 'WFSTD/HR_APPLICANT_STATUS' is protected, no changes were saved.
LOOKUP_TYPE 'WFSTD/HR_CANCEL_ADDRESS_DETAILS_FRM' is protected, no changes were saved.
LOOKUP_TYPE 'WFSTD/HR_CANCEL_CONTACT_DETAILS_FRM' is protected, no changes were saved.
LOOKUP_TYPE 'WFSTD/HR_CANCEL_MARITAL_STATUS_FRM' is protected, no changes were saved.
Thank you very much!

This is normal and should not be cause for concern if you have not modfied the WFSTD workflow (which you should not !) :-)
HTH
Srini Chavali

Similar Messages

ACTIVITY 'REQAPPRV/MAKE_PREPARER_OWNER' is protected, no changes were saved

Hello Forum:
I am in the mist of applying patch 13014579 to some invalid PO packages and adpatch met errors and adctr can not go pass this point.
adpatch output:
Completed: file icxmsg.ldt on worker 7 for product icx username APPS.
FAILED: file poxwfrqa.wft on worker 1 for product po username APPS.
Completed: file poxwfpoa.wft on worker 4 for product po username APPS.
ATTENTION: All workers either have failed or are waiting:
FAILED: file poxwfrqa.wft on worker 1.
tail -50 /u02/oracle/ofinpappl/admin/OFINP/log/adwork001.log
ACTIVITY 'WFSTD/SETEVENTPROPERTY' is protected, no changes were saved.
ACTIVITY 'WFSTD/XMLCOMPAREDATE' is protected, no changes were saved.
ACTIVITY 'WFSTD/XMLCOMPARENUMBER' is protected, no changes were saved.
ACTIVITY 'WFSTD/XMLCOMPARETEXT' is protected, no changes were saved.
ACTIVITY 'WFSTD/XMLGETTAGVALUE' is protected, no changes were saved.
ACTIVITY 'WFSTD/XMLTRANSFORM' is protected, no changes were saved.
ACTIVITY 'REQAPPRV/SET_REQSINPOOL_SERVICES_REQ' is protected, no changes were saved.
ACTIVITY 'REQAPPRV/RESERVE_AFTER_SUPPLIER_COMM' is protected, no changes were saved.
ACTIVITY 'REQAPPRV/MAKE_PREPARER_OWNER' is protected, no changes were saved.
AD Worker error:
The above program failed with error code 1.
adctr shows:
Control
Worker Code Context Filename Status
1 Run AutoPatch R115 poxwfrqa.wft FAILED
2 Run AutoPatch R115 Wait
3 Run AutoPatch R115 Wait
4 Run AutoPatch R115 Wait
5 Run AutoPatch R115 Wait
6 Run AutoPatch R115 Wait
7 Run AutoPatch R115 Wait
8 Run AutoPatch R115 Wait
How should I proceed?
Mathias

That note was the solution. MOS also gave me that same guide:
$ WFLOAD apps/apps 0 Y FORCE $PA_TOP/patch/115/import/US/PAPWPARN.wft
Skipped the failed worker and resume application of the patch.
Thanks very much
Mathias
Edited by: user558643 on May 9, 2013 11:46 AM

Upload failed your changes were saved but could not be uploaded because of an error. you may be able to upload this file using server web page. save a copy

Hi All,
upload failed your changes were saved but could not be uploaded because of an error. you may be able to upload this file using server web page. save a copy button.
This is the issue which I am facing while working with SharePoint 2010. In a sharePoint 2010 document library I am having an excel file and I am trying to open it from Windows 7 and is office 2010.
I cam e across few suggestion as mentined below but unable to find the location where to do
Go to Resource Policies > Web >
Rewriting > Custom Headers > (if 'Custom Headers' is not visible, click
Customize on the right top to enable the view).
Create a new policy with the Resource as <fully qualified domain name of the SharePoint server:*/*> (for example https://sharepoint.juniper.net:*/* ).
Create the action as Allow Custom Headers.
Apply the settings to the required roles.
Please suggest.

Hi rkarteek
All things you have to do is as follows:
1. Open regedit.exe
2. Naviagate to following key:
[HKEY_CURRENT_USER\SOFTWARE\Microsoft\Office\14.0\Common\Internet]
3. Click Edit Menu -> New -> DWORD with name of "FSSHTTPOff"
(without quotes)
4. Click on "FSSHTTPOff" and enter value of 1
5.
Close any Office Applications and browser sessions
6. Try to reopen your document (no more read only or failure to upload)
have a nice day!

Your Changes were saved but could not be uploaded because of an error

Hi, some times users getting below error while doing check in the documents in SharePoint 2007 sites on their PC:
Your Changes were saved but could not be uploaded because of an error...
I have two WFE servers in Farm: first WFE host name is mydms01 and another WFE host name is mydms02
And we are using NLB URL to access the sites, NLB name is myworld.
Please guide me

Here is your answer, Microsoft changed the way webdav and other files are uploaded,
Office 2010 upload manager is designed to work with Sharepoint 2010 not reverse.
But this is how you fix the tool to work with Sharepoint 2007.
IIS 6.0 Do this
Go to the site on each server if you are a farmed environment.
Locate the Web Application supporting the site and add a custom header to the site.
Add the primary url of the site into the custom headers,
http://site.name.com
and click ok.
No need to restart IIS and it will not impact your services.
IIS 7.0 do this
To resolve the issue, perform the following procedure:
Go to Resource Policies > Web >
Rewriting > Custom Headers > (if 'Custom Headers' is not visible, click
Customize on the right top to enable the view).
Create a new policy with the Resource as <fully qualified domain name of the SharePoint server:*/*> (for example https://sharepoint.juniper.net:*/* ).
Create the action as Allow Custom Headers.
Apply the settings to the required roles.
Note: - This does not interrupt any functionality of the same server, as it just allows Custom Headers, if any, for any request towards this server.

Modified CR2 files in ACR and changes were not saved

I have a directory with 1400 CR2 files in it. I have a stack of picks that I am working with. I went through and for 6 hours adjusted all the images by opening them in Camera Raw and making changes to White Balance, Fill light, etc... When I was done, i clicked done to save the changes to the file (Like I've done many many times before).However most of the modifications were never saved. All the files have sidecar xmp files, but most show original files without modification. I edited approximately 580 images this way and probably 20% kept the changes and the rest "seem" to have reverted back to their original "As Shot" state. Any ideas what happened? Is this reversible or did I just waste my life?

Look at the folder in windows Explorer. What are the time stamps on the xmp files? Do they appear to be "current" -- that is, timestamps approximately when you performed the ACR edits and pressed Done? Or do 70 to 80% of them have earlier time stamps? Current time stamps would suggest that xmp files are being written or updated, possibly omitting some ACR edit data; earlier time stamps suggest that the xmp files were not updated by ACR-Done.
Sequence the xmp files by Date Modified. Do the xmp file time stamps appear to be in time groups? If you clicked Done after editing 20-25 images in ACR, you would expect to see 20-25 xmp files with the same file modified date and time. If you see this, it suggests that entire groups of edits were saved; but some groups of edits that should be saved by a Done from ACR may not have been saved to xmp. If you see groups of substantially fewer than your usualy edit Done sets of 20-25, it suggests that only some xmp files were written.
Since it looks like that you will need to go back and redo the edits to a good many of your 580 images, you might try looking at the xmp files after each ACR Done. Sequence the xmp files by Date Modified. Is the number of file modified timestamps with the 'now' date and time the same as the number of files you just edited in ACR?
In Bridge, do the just-performed edits appear in the thumbnails? Look a the ACR values in the metadata for each of the just-edited images. Do they show the values you just edited? (Be sure that you have checked on Camera Raw metadata in Bridge preferences.)

I have recently changed from a macbook to macbook pro and all my files were saved on time machine but some won't open. It says I need permission.. How do I open them?

I have recently changed from a macbook to macbook pro and all my files were saved on time machine but some won't open. How do I open them?

Are you trying to open the backup files via the Finder or an application? If so, that's not how you should access your backups -- use the "Star Wars" display, per #15 in Time Machine - Frequently Asked Questions.
How did you get your stuff on the new Mac?
It sounds like you may have skipped the offer to transfer it when your Mac first started up, created a user account, then used the Migration Assistant app instead. If so, that may be the problem; doing it that way means you end up with an extra user account, and can lose permission to files on other volumes, especially backups.
Please clarify just what you're seeing, and whether you still have the old Mac.

I have the latest Mac OS. I also have stored in iPhoto many old photos which were saved in Photoshop 3.0, which won't open on my MacBook Pro. What do I do?

I have the latest Mac OS.
I also have stored in iPhoto many old photos which were saved in Photoshop 3.0, which won't open on my MacBook Pro.
What do I do?

Il giorno 16/lug/2014, alle ore 21:48, Apple Support Communities Updates <[email protected]> ha scritto:
New discussion activity
KiltedTim has posted in the OS X Mountain Lion community.
I have the latest Mac OS. I also have stored in iPhoto many old photos which were saved in Photoshop 3.0, which won't open on my MacBook Pro. What do I do?
What won't open? Photoshop, or the photos that you "stored in iPhoto"?
To post a reply, go to the discussion in Apple Support Communities.
You are receiving this email from Apple Support Communities. You can change your email preferences in your Apple Support Communities Profile.
TM and copyright © 2014 Apple Inc. 1 Infinite Loop, MS 96-DM. Cupertino, CA 95014.
All Rights Reserved | Privacy Policy | Terms of Use | Apple Support
>

Changes not saved in any transport...

Hi,
This is a basic question and I tried to search in the forum and google but could not find any answers. Help is appreciated.
There is an existing message mapping in PI 7.1 and I changed the assignment of two nodes. I saved and activated the change list.
But there was no prompt for a transport !! So my question is how and where will my change be saved in the DEV system which will then be transported to QA.
Any settings to be done by the BASIS / ADMIN ? Pl advise.
thnks

Hi,
I think I have done it correctly but its a bit different from what you are saying...
From Tools menu I chose Export Design objects and then it chose the S/w component that I was
modifying and There were 2 modes, Transport using CTS and Transport using file system and I chose CTS.
In next step of the wizard I chose " All objects of the SW component...." and then in next it created
me a transport request and then it was done. I could see a preview of the different objects
that were included in that transport.
I could see this transprt created thru menu option, Tools --> Open CTS...
Is that all ?? So once I am done and release this transport, it will be movied to QA right ?
Just want to make sure I dont mess up the existing set up !!
thanks

Transforming Entities to Tables - No changes are saved to the database

Hi,
I have inherited a Designer 9i application which has 4 containers. Changes were maid to one container and I'm trying to transform Entities into Tables.
The transformation runs fine and I get "Changes posted to database" messages.
The problem is when I go in the RON and try to see if changes were maid to the Tables: none ! Nada !
Everything that came with the application (dmp file from vendor) is there but nothing of the new stuff...
I tried Default mode and "Advanced" several times to no avail...
I'm using Designer 9.0.2.10 on a 9i database... Everything is compiled and functionning properly beside to changes that won't get saved into Tables...
Any ideas ?
Thanks !

The fact that you are using the repository owner may be your problem. NEVER use the repository owner for day to day work. The only tool that should ever connect as the owner is the Repository Administration Utility (RAU). Instead, have the DBA create a user for your day to day work, use RAU to grant that user access to the repository, and in the Repository Object Navigator (RON) grant the user rights on various applications.

I changed a password to a frequesntly used site. Firefox has not asked me if I want to save this new password and I have to keep changing the saved one to the correct one. How do I get it to save the new password?

I have websites I use for my employer that require a password. The employer requires these be changed periodically. Always before, if I changed the password, about the second or third time I tried to log in and changed the saved password to the correct one, Firefox would ask if I wanted to save the new password. It is not doing this now. How can I get it to save a new password? It keeps putting in the old one.

Make sure that you do not run Firefox in permanent Private Browsing mode.
*https://support.mozilla.com/kb/Private+Browsing
*You enter Private Browsing mode if you select: Tools > Options > Privacy > History: Firefox will: "Never Remember History"
*To see all History and Cookie settings, choose: Tools > Options > Privacy, choose the setting <b>Firefox will: Use custom settings for history</b>
* Deselect: [ ] "Permanent Private Browsing mode"
The website may be using autocomplete=off to prevent Firefox from saving the name and password.
*http://kb.mozillazine.org/User_name_and_password_not_remembered

My Mac Book Pro changes the saved home page each time I start Safari. I also get new tabs that randomly open asking to clean up my Apple

My Mac Book Pro changes the saved home page each time I open Safari. I am also getting random tabs opening with various "cleaning up" my computer junk.
How do I get rid of this? I tried some of the fixes listed but they don't seem to work or I am doing something wrong.
THanks
Wendi

You may have installed one or more of the common types of ad-injection malware. Follow the instructions on this Apple Support page to remove it. It's been reported that some variants of the "VSearch" malware block access to the page. If that happens, start in safe mode by holding down the shift key at the startup chime, then try again.
Back up all data before making any changes.
One of the steps in the article is to remove malicious Safari extensions. Do the equivalent in the Chrome and Firefox browsers, if you use either of those. If Safari crashes on launch, skip that step and come back to it after you've done everything else.
If you don't find any of the files or extensions listed, or if removing them doesn't stop the ad injection, ask for further instructions.
Make sure you don't repeat the mistake that led you to install the malware. It may have come from an Internet cesspit such as "Softonic" or "CNET Download." Never visit either of those sites again. You might also have downloaded it from an ad in a page on some other site. The ad would probably have included a large green button labeled "Download" or "Download Now" in white letters. The button is designed to confuse people who intend to download something else on the same page. If you ever download a file that isn't obviously what you expected, delete it immediately.
Malware is also found on websites that traffic in pirated content such as video. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow. Never install any software that you downloaded from a bittorrent, or that was downloaded by someone else from an unknown source.
In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
Still in System Preferences, open the App Store or Software Update pane and check the box marked
Install system data files and security updates (OS X 10.10 or later)
or
Download updates automatically (OS X 10.9 or earlier)
if it's not already checked.

How do I find and download my pictures and movies that were saved in icloud and itunes library?

How do I find and download my pictures that were saved to itunes and icloud in my itunes match? I think that I lost my pictures and I really do need them.

Your pictures are not saved in iTunes Match; that is a music service. If you restore your device from a backup saved in iCloud, you will get pictures back, but any pictures taken since the backup will be lost, so you will want to import those to your computer first.

Errors were found when compiling the workflow. The workflow files were saved but cannot be run.

Greetings All,
I am having issues with a SharePoint Designer workflow. This is a SharePoint 2013 environment, I'm using SharePoint Designer 2013 and working on a SharePoint 2010 workflow. I'm developing this as a SharePoint 2010 workflow because I need to do
impersonation.
The environment and workflow have been running, in the past week, without issue. I went to add a couple steps and now I cannot publish the workflow. While in SharePoint Designer, I receive the error:
"Errors were found when compiling the workflow. The workflow files were saved but cannot be run." When I click the Advanced button on the error dialog, the message is "Unexpected error on server associating the workflow."
That is all the error information I have available; nothing is in the log files.
I have investigated this error and tried the following:
Cleared the SharePoint Designer cache.
The WebApp.UserDefinedWorkflowMaximumComplexity was at 7000 so I increased it to 10000. Restarted the servers (which may not have been necessary) and tried again receiving the same error. I then increased it to 30000 with the same error result.
Since this is a large workflow, I tried created a workflow with a single action, write to workflow log, with the same error results.
I reboot the servers and try again and now I can publish the small test workflow but not the original. However, neither will run. When I attempt to manually run the small test workflow on an item, I get an error: "Sorry something went wrong.
An unexpected error occurs. I checked the log files for the correlation id and nothing, nothing was logged for the error. ~arg~
Also, now no workflows can be published in this web app. Not just the one I was working on but none of them!
Does anyone have a clue what has happened to the SharePoint 2010 workflow service? Or some suggestions for me to try?
Thank you in advance for your help!
Bob Mixon

try these links:
http://sp2013.pro/2013/04/solution-errors-were-found-when-compiling-the-workflow-the-workflow-files-were-saved-but-cannot-be-run-cannot-set-unknown-member/
http://code2care.org/pages/sharepoint-errors-were-found-when-compiling-the-workflow-the-workflow-files-were-saved-but-cannot-be-run/
http://sharepoint.stackexchange.com/questions/119909/sharepoint-designer-error-errors-were-found-when-compiling-the-workflow
http://stackoverflow.com/questions/26413125/errors-were-found-when-compiling-the-workflow-in-sharepoint-2013
Hi Sagar,
I appreciate it but if you see my original post, this is a SharePoint 2010 workflow that cannot be published; which has now caused all SharePoint 2010 workflows in the same web app to error.
Your first link is specific to SharePoint 2013 workflows.
Your second link refers to the UserDefinedWorkflowMaximumComplexity. If you read my original post, I've already tried this and I've tried to publish a small (single activity) workflow.
Your third link also refers to large workflows with many approval activities. My workflow doesn't contain any approval activities.
And you fourth link refers to 2013 workflows not 2010.
My issue is with publishing and running a SharePoint 2010 workflow in SharePoint 2013.
Thank you...

Unable to save PDF's from Internet Explorer. Error "The document could not be saved. The disk you were saving to or the disk used for temporary files is full. Free some space on this disk and try again, or save to a different disk."

We are currently in a published desktop environment in Citrix XenApp 6.5. Server is running on Windows 2008 R2. Users are not able to save PDF's into the redirected folders (ie Desktop or My Documents). Exactly same issue described in "The disk you were saving to or the disk used for temporary file is full...." Anyone has any suggestion??

Same problem here. Any ideas?
Saving with Shortcut "CRTL+SHIFT+S" works just fine.
Using IE 11.0.9600.17728 and Adobe Reader 11.0.10

My ipod shuffle 3rd generation is not showing in mac or itunes. It can play songs which were saved before. It can be charged also.

My ipod shuffle 3rd generation is not showing in mac or itunes. It can play songs which were saved earlier. It can be charged also with the USB cable.
I have updated my itunes. Reinstalled the same but still ipod is not showing in mac as well as in itunes.
I have tried to reset the ipod but still the results are same. Please help me..

I have exactly the same problem as vinitpanse - does anyone have an answer?

ITEM_TYPE 'WFSTD' is protected, no changes were saved.

Similar Messages

Maybe you are looking for