ItemEditEnd not triggered when Mousing out of a grid instead of tab

The title says it all. If the user tabs out of an editable grid cell, life is good, the itemEditEnd is triggered, however, if the user changes the value in the cell, then clicks with the mouse on a different control, the function is not called. How can I make SURE it is called whenever a columnn in a grid is changed?
Thank You
Bruce

I haven't heard of this issue before. Make a small test case that shows the
problem and post it.

Similar Messages

BSEG.CREATED event not triggering when a document is posted in FB60

Hi All,
I have a requirement in which i need to post documents in FB60/FB65/FB01 tcode. But when i post the document in FB60 the event BSEG.CREATED is not triggering. I could not see any trace in SWEL. But when i park the document in FB60, FIPP.CREATED event is getting triggerd.
Can anyone tell me why this BSEG.CREATED event is not triggering.
Thanking you in advance,
satheesh.

Hi Viji,
Thanks for your quick reply.
We have maintained the required configurations in the system related to this. But still the event BSEG.CREATED is not triggering.
for this the alternative solution is to implement the BTE '1030'. But our functional team is asking us to check whey standard business object BSEG.CREATED is not triggering when we post a document. So that particular reason we are not able to find out.
Configuration maintained.
1) Created a workflow variant and assigned it to particular company code(OBWA and OBWJ).
2) Checked the 'Posting' release' and 'Release payments' checkboxes in the OBWA transaction.
3) Event linkage for BSEG is active.(SWETYPV)
Thanks,
satheesh

Workflow not triggered when i have changed the PO

Hi,
We have custom fields (Price) in PO Header as well as in item. when we update in header the price should get distributed to items.
we have custom workflow evernt (changed) to update the items if user change in header. But the issue is if user changes the items and save the po, it is not updating immediatly. after we come back to Purcahse Order and save the purcahse order again then it updates the table.
Is there any reason why the event is not triggered when the PO was changed initially.

Hello,
"We have custom fields (Price) in PO Header as well as in item. when we update in header the price should get distributed to items. "
If you update a price in the header, how/why would that be distributed to the items? Is this a total price of the whole PO? Why not just have it in the header?
"we have custom workflow evernt (changed) to update the items if user change in header."
OK. Strange, but OK.
"But the issue is if user changes the items and save the po, it is not updating immediatly"
I thought it was supposed to happen when the users changed the header, not the items.
If you really have a workflow to update the items when the header is changed, then maybe it's not succeeding if the PO items are locked, eg by having them on your screen. Did the worklow actually start? Any error messages?
rgards
Rick Bakker
hanabi technology

ChaRM: Mail not triggered when current user = mail receiver?

Dearl all:
     Ive noticed that mails are not triggered when the user who is processing a document is the same who will receive it. Is there any way to deactivate this functionality?
Thank you very much,
Federico.

Hi Miguel, how are you?
      I think it is a nice feature not sending a mail when the user who is changing the status in the one who would receive the mail in that next status. But Im in the testing pahse of implementing SOLMAN and I would like to know if this is a real feature or a flaw, and besides I would like to turn off this possible feature, just for the testing phase. This is not a big deal anyway.
    By the way, I also notice that if there is a partner assigned multiple times to a document, it doesnt trigger the mails as expected.
Best regards,
Federico.

ADF disclosure action listener not triggered when set disclosed directly

ADF disclosure action listener not triggered when set disclosed directly in code.
Is this expected behaviour?
Thanks

This should be the expected behaviour as there is no client side event fired.
You would need to queue a Disclosure Event programmatically if you need to call the disclosureListener through code,

User Exit RV60AFZZ not Triggered When Processing IDOC

Hi,
I'm writing to seek some advice on why is the user exit RV60AFZZ not getting triggered when I do a vf01 bdc inside my inbouund IDOC function module. But when I try SHDB the user exit is getting triggered normally.
Thanks,
Mawi

Hi,
Yes I'm creating invoice using delivery orders, inside the idoc function module I'm using bdc call transaction vf01 but somehow it does not trigger the user exit.
But when I do manual vf01 in sap, the user exit is getting triggered.
I cant figure out why this is the behavior of sap.
Regards,
Mawi

Workflows not triggered when documents are created in Doc Set via Content Organizer

The following is my scenario:
A document set (containing several documents) is created in Library A on Site A
Using Send To, the Document Set is sent to the Drop Off Library on Site B (a different Site Collection)
A Content Organizer rule then moves the Document Set and its documents to destination Library B
In Library B I have defined a workflow (using Visual Studio 2012) that is triggered when new item is create
When the Document Set arrives in Library B from the Drop Off library (i.e. when the Content Organizer moves the Doc Set to Library B), the workflow is triggered (and executes) on the Document Set, but it is NOT triggered on the documents within the Document
Set. How can I get the workflow to trigger on the documents within the set when they are created via the Content Organizer rule?
The interesting thing is that if I manually add another document to the Document Set in Library B, the workflow is triggered on that document. It just does not trigger when the documents are created via the Content Organizer.

Hi,
In edit Content Organizer rule page, I see there is an option as Automatically create a folder for each unique value of a property:
However, unlike the drop down used in the property based filters above, this drop down *only* contains properties that are required by your content type.
This is done to prevent adding folders that have no values for a property.
If you need to put similar documents to the same folder, you could consider making use of this feature.
Regards,
Rebecca Tu
TechNet Community Support

FocusLost of jtable is not triggered when focus is lost from a cell editor.

Hi
I have a jtable and some columns in the table contains editable cells. I started editing a cell and, before the cell editing is stopped, i clicked another component in the panel using mouse. At that time, the focusLost() method of the table is not triggered. So that the code written in my focusLost() method of table is not working.
If I add focuslistener to the cell editors, the focusLost() method of this cell editors are triggered at that time.
Shall I need to add focuslistener to each cell editors used in my jtable ? Anybody know a better solution to handle this problem ?
Regards
Anoop

Add this to your code.
yourTable.putClientProperty("terminateEditOnFocusLost", Boolean.TRUE);

:system.cursor_block value does not change when mouse click

Form created with Forms version 6.0.8.8.0. Consists of a control block that has the toolbar buttons, a filter control block that contains item, and a data block. The filter control block and data block are on a tabbed canvas. There are 3 tabs with corresponding filter control block and data block on each.After the data block is queried, code sets the navigation to the control block with the go_item built-in. The user would use a mouse click on the filter control block on one of the tabs to activate an LOV, code is in a generic when-mouse-click trigger that will determine the item focus with the value in the system variable :system.cursor_block. Works for the first tab. Does not work for 2nd or 3rd tab. On-error trigger does not capture any error. Values for :system.cursor_block for tab 1 show that value before mouse click is 'control.detail' and after mouse click is 'filter.a'. For tabs 2 and 3 the value before mouse lick is 'control.detail' and after mouse click is 'control.detail' instead of 'fiter.b' or 'filter.c'. Verified that the 3 filter blocks are identical. Can anyone shed some light on this anomoly? I have been looking for this solution (many different iterations and changes to trap it) for too long.

:System.Cursor_Block reports the name of a block, NOT a BlockName.ItemName.
Use :System.Trigger_Item with your mouse click, or :System.Cursor_Item.

Phone not ringing when calling out

Iphone 4s When calling out phone does not ring.. I have done a restore and reboot and still not working?

Thanks I have tryed all this but reseat Sim card. I will do that now. I called apple today they had me
do the reset but still not working all the time I may have to send it back for replacement...

Approval Procedure not triggered when Credit Limit Exceeded

Hi,
I've defined an approval procedure which I would like to launch when a clients Credit Limit has been exceeded. I've checked the required fields on Administration > General Settings > BP tab (credit Limit, Commitment Limit, AR Invoice, Delivery, SO). I've also checked the Activate Approval Procedures on the same tab.
I know the approval procedure has been set up the correct way, since it is launched when I change the Terms to for instance 'Total document'.
There is a system-message when I am creating a Delivery Note for a customer indicating that the credit limit for this customer has been exceeded. But still, the system allows the user to add the document without triggering the approval procedure....
What am I doing wrong?
Btw: The credit limit exceeded is in negative numbers, but I've tried both the condition 'Deviation from Credit Limit greater than 1' and Deviation from Credit Limit Less than 1...

Could you clarify what you mean by "The credit limit exceeded is in negative numbers"
Negative number: the system message I get when I create a delivery note for a customer, exceeding the credit limit is the following:
Customer has exceeded credit limit - 95.479 EUR
Customer has exceeded commitment limit - 95.479 EUR
Continue (Y/N)
Make sure the Credit Limits are set in the BP Master. --> OK, credit limit is set to 100 EUR, Commitment limit to 100 EUR
Also use Great than in Ratio and try to use a small number like 10 in the value --> I am using 1 EUR
Also, check in System Initialization > General Settings..BP Tab Activate approval procedure is checked. --> it is checked.
Using the range option does not solve the problem, in fact even if I use 'Deviation from Credit Limit does not equal 1 EUR' the approval is not triggered. When I use the same Approval template, but I alter the terms to Total document greater than 1 or Discount% greater than 1 the approval is triggered.
Edited by: Rui Pereira on Apr 29, 2009 1:19 PM

Tabbed browsing does not work when i click on (+) or thru file-new tab also?

When i wish to open a new tab either by clicking mouse over the + sign on the current tab or by file-new tab menu access, tabs are not opened. it works only when clicking on links in present window. earlier i could open tabs at will.

Disable or uninstall the Ask Toolbar extension, there's a problem with it in Firefox 3.6.13.

When logging out of a website, a new tab opens to the closed page but the original tab is still open. How do I close first tab?

When I open a site, such as a Credit card website, after I logon, but when I try to logout. When I hit the logout button, a new tab opens and this page is now the logged out page of the website, but the original tab is still open and the page is still logged on. I have tried every possible combination of changes in the Tab Mix Plus but cannot get the right ones to fix this problem.

Thank's but still no fix.
In safe mode everything works.
Without Zotero - everything works.
When the popup is loaded with Zotero, the tab shows a constant "Loading" with the circular in process icon.
The Zotero icon shows to the left of the tab.
If I right click on Zotero and close it, the close() js works properly
Is there a way to do a window.open() with:
A. no tabs -or-
B. block all add on's -or-
C. to kill an add on
before doing the close()?

(FP Bug?) - Mc's/Sprite's events triggered when mouse leaves SWF area

Hi guys,
I wonder if somebody had a similar problem and can help out. I have a button on y=0 (may be either Movieclip or Sprite) with two events: ROLL_OVER and ROLL_OUT. Now when the mouse pointer leaves the SWF area, both of these events get triggered, even if the button is not hovered at all. There is no MOUSE_LEAVE event defined nor anything like that (see the code below). I realized that changing the y position of the button helps, strangely small numbers don't - if I set y=1 the bug still occurs, but y=20 solves the problem. What the hell? This happens only in Firefox on Mac, Safari seems to work alright. (FF 5.0.1 and 6 tested, on OSX 10.6.8 and 10.7)
I uploaded a video to youtube in case somebody would be interested of seeing this from Windows (where I assume this doesn't happen, but cannot test at the moment - please leave feedback if you could - http://www.youtube.com/watch?v=YKWl50v_MIo - first 10 seconds are kinda crappy, sorry)
Is this a Flash Player bug or am I missing something really badly here? Thanks!
package {
    import flash.display.Sprite;
    import flash.display.Stage;
    import flash.display.StageAlign;
    import flash.display.StageScaleMode;
    import flash.events.Event;
    import flash.events.MouseEvent;
    import flash.display.MovieClip;
    import flash.text.TextField;
    public class Main extends Sprite {
        private var field:TextField;
        public function Main() {
            stage.align = StageAlign.TOP_LEFT;
            stage.scaleMode = StageScaleMode.NO_SCALE;
            //Set up the textfield
            field = new TextField();
            field.x = 200;
            field.y = 200;
            field.border = true;
            field.width = 200;
            field.height = 100;
            field.wordWrap = true;
            addChild(field);
            //Create and set up the MovieClip or Sprite - the MovieClip/Sprite must have content,
            //cannot be empty, otherwise the bug doesn't appear!
            var b:MovieClip = new MovieClip();
            b.graphics.beginFill(0xCCCCCC);
            b.graphics.drawRect(0, 0, 50, 50);
            b.graphics.endFill();
            addChild(b);
            b.y = 0;
            b.addEventListener(MouseEvent.ROLL_OVER, rollOverHandler);
            b.addEventListener(MouseEvent.ROLL_OUT, rollOutHandler);
        private function rollOverHandler(e:MouseEvent):void {
            field.appendText("Over"+new Date().getTime()+"\n");
            field.scrollV = field.maxScrollV;
        private function rollOutHandler(e:MouseEvent):void {
            field.appendText("Out"+new Date().getTime()+"\n");
            field.scrollV = field.maxScrollV;

Yep, strange thing. I filed a report so feel free to vote. https://bugbase.adobe.com/index.cfm?event=bug&id=2944625

Workflow not triggering when changing Item-level Permissions in Sharepoint 2013 list

Scenario:
We have a custom list in Sharepoint 2013 that we use for Case Management. We have a workflow that triggers on a created item generated from an email. The user then gets a reply with a link to his own case.
I want the users only to be able to see their own cases and no one elses. When I change this under
Advanced Settings under List Settings and
Item-level Permissions and set them to Read items that were created by the user
and Create items and edit items that were created by the user
the workflow doesn´t trigger.
How can I resolve this? I've tried every possible out-of-the-box permissions but with no result. Help!
Thanks in advance!
// Browncreek

When you're testing , remember you cant trigger declarative workflow from the System Account - you need a general user account for auto-trigger workflows. Good luck!
Chris McNulty MCSE/MCTS/MSA/MVTSP | blog http://www.chrismcnulty.net/blog | twitter @cmcnulty2000 Microsoft Community Contributor Award 2011
Hi, I have the same problem. Except that I am not using an email to create a new item. The item is created by members of a SharePoint group that have Contribute access to the list. When use the same settings i.e.
Read items that were created by the user and Create items and edit items that were created by the user,
the workflow does not trigger. If I set it back to Real all items and Create
and Edit all items, it triggers the workflow.
Please help me resolve as I have rolled this out to pilot users and am having this trouble.
Thanks,
Vishal

ItemEditEnd not triggered when Mousing out of a grid instead of tab

Similar Messages

Maybe you are looking for