Items are not displaying in internal catalog after Linux and COA change
Navigate to iProcurement Responsibility
1.Select "ITAM" catalog and enter % to serach ITAM field and click on "Go" button.
2.And it is returing "No results found. " messgae.
Recently Moved from HP-UX to Linux x86-64. also changed the COA segments
Can you please help
Bernd: the reason I asked about views is that you don't have any error messages. This might indicate that (a) you have no items in the view, or (b) there's something wrong with view-role-user assignment.
To check for (a), please go to the published procurement catalog, and go to Views tab. Check that your View is Active. Click on your View ID link to display view details. You should see a list of characteristics assigned to your view in Assign Characteristics sub-tab (the list should not be blank!). Go to Assign Items sub-tab. Navigate in your schema to find items that are supposed to be assigned to your view. You should see "Yes" in the "Assigned" column for those products. If you don't, then you simply don't have any items in your view.
Another thing I'd like you to check: when the user calls your procurement catalog for search, do you see the name of the catalog displayed just below the drop-down "Select Categories Hierarchically"?
Cheers,
Serguei
Similar Messages
-
Document library items are not displaying in sorted order in sharepoint 2013
Hi,
I have a document library , I am storing document sets on it.
28326 items are there in the library.
I have configured sort on Name columns. Initially items are displaying in sorted order like (A,B,C,D,E...)
Now Items are not displaying in a sorted order it is displaying like (A, B,C,D,E,A,C...) like this.
Please help me on this sorting issue.
Thanks,
SamirAre the documents displaying in your image inside the document sets? If so then your sets (folders) are displaying in alphabetical order and the documents inside the sets are displaying in alphabetical order. This is what i would expect.
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem. -
CIN: Items are not displayed while updating the RG1 Register using T Code:
Hi Experts,
Items are not displayed while updating the RG1 Register using T Code: J1I5.
System is not showing any error message.
Can any one explain to update the RG1 Register?
Thanks
ChandraHi,
dont go the table again and again . the table is updated at intial stage only for stock update but not when SAP is running.
In day to day bussiness the flow is as follows:
Production - MB31 - to Unres stock
Sales - VL02n - PGI - to customer - i.e out of unres stock
Every day u can run TC J1i5 once in a day as decided and update the register so all transactions which have happend in that day gets updated i.e both input and output.
and this will happen every day.
hence dont use table as it is only for intial data upload i.e just before golive.
Hope i am clear.
krishna -
Quotation Items are not displayed on SRM Web
Hi experts!
I did a program to create a quotation based on a Bid invitation.
My program creates the document correctly, but, when i try to show the quotation on the browser, the quotation items are not displayed.
If I open this same quotation on the SRM Gui (TCODE = BBP_PD), the quotation items are there.
Anybody in here already had this problem?
Thanks in advance.
Danilo CardosoHi.
I got to fix my program!
My code is like that below:
ls_quot_item_e-src_guid = bid_items-guid.
ls_quot_item_e-src_object_type = 'BUS2200001'.
The business object BUS2200001 is the BO of Items of Bid Invitation, now, my reference is complete.
It works fine now.
Thanks for you help.
Regards.
Danilo -
Approved and published items are not shown in the catalog search
Hello all,
We are implementing SRM 4.0 SSP scenario .
To support shopping of EBP we are also implementing CCM 2.0 as an add on.
Please note CCM and EBP are on same client and CAT & CSE are also on the same client.
No XI is involved. The catalog scheme was uploaded as CSV 2.0. The items for the catalog was created manually in CAT.
Although the item has the status "approved" and the procurement catalog which is also the master catalog was published successfully the item is not shown after searching by CSE in EBP. Also the categories of the scheme are not shown in the catalog search.
Do i have to approve the categories too and if yes can you explain me how to do this?
I think you see that I'm a newbie at srm and ccm and this problem is probably no real problem but I have not found any similar topics in the forum. So please can you help.
Thanks a lot for your help.
Best regards,
BerndBernd: the reason I asked about views is that you don't have any error messages. This might indicate that (a) you have no items in the view, or (b) there's something wrong with view-role-user assignment.
To check for (a), please go to the published procurement catalog, and go to Views tab. Check that your View is Active. Click on your View ID link to display view details. You should see a list of characteristics assigned to your view in Assign Characteristics sub-tab (the list should not be blank!). Go to Assign Items sub-tab. Navigate in your schema to find items that are supposed to be assigned to your view. You should see "Yes" in the "Assigned" column for those products. If you don't, then you simply don't have any items in your view.
Another thing I'd like you to check: when the user calls your procurement catalog for search, do you see the name of the catalog displayed just below the drop-down "Select Categories Hierarchically"?
Cheers,
Serguei -
Items are not displayed --- REUSE_ALV_HIERSEQ_LIST_DISPLAY
Hi experts,
i'm stuck in this weird problem.
Items (it_items) are not displayed in table. I've cheked with debugger and it_items contains lines.
Thanks in advance.
REPORT z_hier.
TYPE-POOLS: slis.
DATA: fieldcatalog TYPE slis_t_fieldcat_alv.
DATA: it_header LIKE STANDARD TABLE OF zvend_header WITH HEADER LINE,
it_items LIKE STANDARD TABLE OF zvend_items WITH HEADER LINE,
g_tabname_header TYPE slis_tabname,
g_tabname_item TYPE slis_tabname,
gs_keyinfo TYPE slis_keyinfo_alv.
PARAMETERS: lifnr LIKE lfa1-lifnr.
INITIALIZATION.
CLEAR gs_keyinfo.
gs_keyinfo-header01 = 'LIFNR'.
gs_keyinfo-item01 = 'IDNLF'.
g_tabname_header = 'it_header'.
g_tabname_item = 'it_items'.
START-OF-SELECTION.
PERFORM retrieve_data.
END-OF-SELECTION.
PERFORM build_fieldcatalog.
PERFORM display_list.
FORM build_fieldcatalog.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
* I_PROGRAM_NAME =
i_internal_tabname = g_tabname_header
i_structure_name = 'ZVEND_HEADER'
i_client_never_display = 'X'
* I_INCLNAME =
* I_BYPASSING_BUFFER =
* I_BUFFER_ACTIVE =
CHANGING
ct_fieldcat = fieldcatalog
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
* I_PROGRAM_NAME =
i_internal_tabname = g_tabname_item
i_structure_name = 'ZVEND_ITEMS'
i_client_never_display = 'X'
* I_INCLNAME =
* I_BYPASSING_BUFFER =
* I_BUFFER_ACTIVE =
CHANGING
ct_fieldcat = fieldcatalog
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. "build_fieldcatalogHi Dan M.,
Please follow this...
CALL FUNCTION 'REUSE_ALV_HIERSEQ_LIST_DISPLAY'
EXPORTING
i_callback_program = w_repid
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = ' '
is_layout = wa_layout
it_fieldcat = i_fieldcat
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT = I_SORT
IT_FILTER =
IS_SEL_HIDE =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
it_events = i_event
IT_EVENT_EXIT =
i_tabname_header = 'i_ekpo' <----
Pass here header table name
i_tabname_item = 'i_eket' <----
pass here item table name
I_STRUCTURE_NAME_HEADER =
I_STRUCTURE_NAME_ITEM =
is_keyinfo = wa_keyinfo
IS_PRINT =
IS_REPREP_ID =
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE =
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
t_outtab_header = i_ekpo -<<----
Pass here header internal table
t_outtab_item = i_eket <<----
Pass here item internl table
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
for wa_keyinfo:
You need to use common fields between header & item.
for ex:
wa_keyinfo-header01 = 'EBELN'.
wa_keyinfo-item01 = 'EBELN'.
wa_keyinfo-header02 = 'EBELP'.
wa_keyinfo-item02 = 'EBELP'.
Hope this can solve your problems.
Regards,
Tutun -
GUI status items are not displayed
Hi all,
Some parts of gui status are not displayed but some of them are displayed.
What is the problem?
Thanks.
deniz.Hi snehi chouhan,
I have created a program and two gui statuses for this.
One of them is set at first display of report but not all items.
Thanks. -
The stock quotes, fox sports and movie times content fields do not display and the controls do not work on any of content boxes. The customize and add content tabs do nothing. This all worked with 3.6 but not with 4.0.
A column in the search results was changed to a Simple Checkbox when we upgraded to 4.0 (it has always been a checkbox in the older APEX versions). When I put it back to Standard Report Column I no longer get the page not found error.
Is there some additional/different setting I need to do in order to use the simple checkbox option in a search results set?
ETA: I see now that Checkboxes are not intended to work in standard report regions so I'll change them to LOVs or something and my problem should be solved.
Edited by: mimi_jones on Jul 18, 2011 6:16 AM -
FB05 All open items are not displayed
Hi,
We are trying to clear invoices on customer XXXX but it does not show all invoices in transaction FB05.
We used all Special GL indicators and with normal items tab seperately as well as simultaneously but not all items are displayed What could be the problem.?
regards,
MakrandHi
You can first analyze the open items in FD10N and check if any uncleard entries are present . I think that even if there is a payment block, the process item list should show all the open items as seen in FD10N.
Thanks
kamala -
Profit center line items are not displaying in KE5Z
HI Eperts,
we are executing tcode KE5Z. System is not displaying any line items. because we have missed out in configuration updation of line items and on line transfer check boxes activation in 1KEF.
please advise how we have to retreive whole data posted up to now under this controlling area..
Regards
vekat....Hi Venkat,
Please check the following link.
[http://help.sap.com/saphelp_45b/helpdata/en/eb/1370e343c411d1896f0000e8322d00/frameset.htm]
Also check the tcodes 1KE8 (Transfer FI Actual Data), 1KEC (Transfer MM Actual Data) and 1KE9 (Transfer SD Billing Documents)
The path for these tcode is as under:
Controlling --> Profit Center Accounting --> Tools --> Prepare Production Startup --> Data Transfer.
Please check in your test system first.
Regards,
Sameer -
TDS line items are not Display in FB60
Hi Experts,
when in simulate a document in T code- FB60. the TDS amount is calculated properly . DR , Cr is ok but the Line item of the TDS is not displayed. when i post the document and open in FB03 all line items are dispalyed with TDS Line items also.. Proper Tax code of payment and invoice is attached.
why not shown in FB60 when simulating a document??Hi
If in FB60 you want to simulate tax items also, click on simulate from menu, you will be able to see the required details. If you click on simulate icon, it will not be visible.
Regards
Sanil Bhandari
<a href="http://www.vcq.biz/">nature wallpapers</a>, <a href="http://www.utorrent.name/">utorrent</a>f in FB60 -
Multi level BOM explosion in CS11/12/13 Cost of items are not displayed
Hi,
I want to display cost of the components in CS11 / CS12 / CS13 T.codes Std SAP will not display the cost of components. for this they have given note 177006 and asked to change some manual correction. In the post processing of the note they have asked put "your_display_profl" This is making me confusing I wanted know whether I want to create a new display pofile using CLVL t.code or can I make the correction as said by SAP "your_display_profl". Could some body guide me in this regard.
Regards
Ramana>
Venkata Ramana wrote:
> Hi,
>
> I want to display cost of the components in CS11 / CS12 / CS13 T.codes Std SAP will not display the cost of components. for this they have given note 177006 and asked to change some manual correction. In the post processing of the note they have asked put "your_display_profl" This is making me confusing I wanted know whether I want to create a new display pofile using CLVL t.code or can I make the correction as said by SAP "your_display_profl". Could some body guide me in this regard.
>
> Regards
>
> Ramana
Ramana,
Which version of SAP you are using, if its below 4.6c, then
You need to have custom Display and Print Profile defined through CLVL transaction and used in the modification proposed.
If your version is 4.6c onwards then,
If you want to use the variable list then you need to have the You need to have custom Display and Print Profile defined through CLVL transaction and used in the modification proposed with IF.
If you want to use the ABAP ALV based output, then you should not implement the IF... ENDIF query of the suggested modification concerning the user-defined list profile; instead you should set the local L_MBWLS parameter to 'X'
I hope you need to work with your ABAP person to clearly understand this correction Instruction and Implement as required.
Regards,
Prasobh -
Open items are not displaying in FBL3N
This is with regard to "FBL3N" report. When we have executed this the result is as mentioned below by item wise:-
1) Open Items :- Report is showing all items (including open & closed)
2) Closed Items :- Showing no items
3) All Items :- Showing all items (including open & closed)
I am attaching the screen shots for your reference.
It is working fine for "FBL1N" & "FBL5N".
Hence request you to provide a solution in such a way that if we execute open items in FBL3N, report should show open items alone and similarly for closed & all items.
double-postso,what i need to do? i tried to change but it is showing the below error
Message text
Open item management is not defined for reconciliation accounts
You cannot change the open item management setting; (see long text)
The data contains error, you cannot save
You cannot change the open item management setting; (see long text)
Message no. FH087
Diagnosis
This account does not have a balance of zero.
System Response
You cannot switch the open item management specification on or off with
this transaction.
Procedure
If you want to switch this function on retroactively for a certain
account, you should create a new account with the correct setting and
use this to make a transfer posting of existing items.
If you want to switch off the open item management function
retroactively for an account, you must first clear all the postings
currently on this account. You cannot make any changes to the account
management method until this is done.
for this what i need to do? -
Items are not displaying in HtmlSelectOneListbox
Hi All,
Added following code in JavaBean method, and JavaBean is having property for controlPanel type HtmlPanelGrid with getter and setters.
List children = controlPanel.getChildren();
HtmlSelectOneListbox listbox = (HtmlSelectOneListbox)application.createComponent(HtmlSelectOneListbox.COMPONENT_TYPE);
SelectItem[] nameItems = new SelectItem[2];
nameItems[0] = new SelectItem("sharath", "Sharath");
nameItems[1] = new SelectItem("bharath", "Bharath");
listbox.setValue(nameItems);
children.add(listbox);While display on the screen it is showing list box without any values(blank), can any one let me know what I'm doing wrong.
Thanks,
Sharath.Another way to do is:
List children = controlPanel.getChildren();
HtmlSelectOneListbox listbox = (HtmlSelectOneListbox)application.createComponent(HtmlSelectOneListbox.COMPONENT_TYPE);
List arr = new ArrayList();
arr.add(new SelectItem("sharath", "Sharath"));
arr.add(new SelectItem("bharath", "Bharath"));
UISelectItems items = new UISelectItems();
items.setValue(arr);
listbox.setValue(items);
children.add(listbox); -
Saved Objects are not displayed in designer view after insert
Hi All,
My HFRS is acting weird today. I tried to insert a saved Object(text,Image) into my report. I have inserted them by (Insert>>Saved Object) but I'm unable to view them in designer view after insert. When I run the PDF Preview I'm able to see the objects on the report. Any assistance? I want to move the text object to the bottom of the report.
Thanks.Resolved it.
Maybe you are looking for
-
How to submit a concurrent program from a custom form.
I'm use Forms [32 Bit] Version 6.0.8.26.0 (Production) and Oracle Applications : 11.5.10.2. I need execute a concurrent program from a custom form. In the custom form I have a button and when that button is clicked I want to submit this cocurrent pro
-
In plain English - How can I get music from one computer to another?
Honestly guys, I havent a clue! I have purchased music from my work PC, but cant access it from my Home PC. I have read the manuals, but it dosent make sense to me! So, in ordinary, basic, plain English, how do I access it from home?!
-
How to get the absolute path of a DTD referenced in an XML?
Hello! My OS is Windows. I use "org.apache.xerces.parsers.SAXParser" which implements LexicalHandler to parse XML files. When method "startDTD" starts and "systemId" is got, how can I get the absolute path? Is there any simple way? Regards!
-
My formula is a % of total. (What % does the child represent to the immediate parent?) Formula tested: Member%@parentval(dimension,Member)If the numerator is a shared member, it automatically pulls the parent of the stored member. Basically the level
-
Alarm clock on ipad/iphone
sometimes I will open my ipad alarm clock and notice that it is showing the day of the week as the wrong day, for instance, today Sunday was highllighted instead of Tuesday, meaning my alarm clock didn't go off for work. The calendar does show the r