Items are not updating properly in DP90
Hi,
As per my requirement , i have to add the items from sales order created by DIP profile. It is updating only one item instead of three when i ran the transaction DP90 with Sales order number and Posting date to. I have passed the required data to ET_DLIA and ET_DLIV1 tables while using the exit 'EXIT_SAPLAD15_005'.
Can any body suggest me if i miss any required input data to above mentioned tables.
Regards,
SK.
879035 wrote:
Hi,
I was unable to select any item (nothing is getting displayed in Ordered Item field when the LOV is clicked) in Sales Order Lines.
The Sales Order header information i was able to enter & generate the Order Number.
R12.1.3 is the version i am using.
Thanks,
Chandra.Have you done all the required setup in OM??
Like system parameters...Imp one would be Item Validation Organization
Make sure item is also available in the price list which you are using in order
Mahendra
Similar Messages
-
Asset Line items are not updating in table ANEP
Hi friends,
I found that asset line items are not getting updated in ANEP table,.
This is my precedure for posting of depreciation.
I'll create Asset through AS01, then i'll use the T.Code: F-90.. then i'll run the depreciation program thru t.Code: AFAB.
In but i am unable to capture the values of Planned and Depreciated or Posted values in ANEP.. Is there is any other table for this...
Where is the mistake in my process..
thanks in advance..
NaveenHI Naveen
The FI-AA documents are stored in tables ANEK (document header), ANEP (document line items) and ANEA (proportional values). You can use FI-AA standard report RABEWG_ALV01 to list all transactions to an asset in one fiscal year, and report RAABGA_ALV01 to list only retirement postings.
ANEA should be the solution you are looking for.
Hope it helps!
Cheers
Z -
Why is my "recent items" list not updating properly?
When I go under the Apple menu to "Recent Items," I find that sometimes it does not actually show the most recent documents I have been working on. I just closed a Microsoft Word document that I've been editing and saving for the past two hours, and it doesn't appear in the list, yet a bunch of other items are documents I had open earlier today (and have since closed). Excel spreadsheets randomly fail to appear sometimes, then appear other times. What gives?
The solution - turn cookies back on in Safari.
I'm guessing here, but it seems likely that iTunes uses the same rendering engine as Safari, and perhaps it is also dependant on Safari's use or non-use of cookies.
What I know for sure is this - once I turned cookies back on in Safari, my list of Purchased items was populated, instead of being blank. So, hope this helps others.
(I didn't have to reload my library, or any of the other things that others have suggested.) -
Smart playlists are not updating properly
on itunes 12 i've noted that smart playlists are no longer updating with new podcasts properly. Only only podcasts are added to the smart playlist. Please fix this.
With more testing, it turns out to be just Wow Hits 2012. All my other iTunes-Store-purchased music is updating properly.
http://itunes.apple.com/us/album/wow-hits-2012/id462986937 -
HT202297 My reminders are not updating properly on my iPhone 5? What should I do?
I'm not really sure when this started happening but, my reminders no longer appear in the upper right hand corner of the app anymore. Once I set a reminder and the designated time has passed. It will not show me that I have reminders that have not been checked off.... Very upsetting. Any suggestions??
There are no unlocking codes for an iPhone. O2 sends an authorization to Apple who adds your iPhone to their list of unlocked devices. You then restore the iPhone. See:
http://support.apple.com/kb/HT5014
If you got a code of some sort, either whoever you talked to at O2 didn't understand the procedure or you didn't actually talk to O2 but instead some scam company purporting to unlock for a fee.
Regards. -
My Changed Icons Are Not Updating Properly
I've changed some folder icons by copy+pasting a jpeg into the 'Get Info' window, as per the normal way, but instead of seeing the image as an icon, I am just getting the universal jpeg icon.
In earlier versions of OS it may have taken opening the file in order to update it, but I'm getting nothing.
I'm uneasy with the fact an onlooker might confuse a movie+subtitle folder for a movies-by-director folderThanks abwhite57 for the suggestion. I was able to fix the problem before seeing your reply.
As I went thru the process of cleaning up the desktop icons, I noticed that moving one to the trash or to the finder would change the thumnail view back to it's proper appearance. So an icon would go from one that said "archive" back to thumnail view of it's webpage. So I then dragged the icon back onto the desktop. Problem solved. -
Hi,
I've searched in forum.I've got solution.I've 26 line items and want to update all the records.It updates only 24 items remaining 2 items are not updated.Because the screen size is for 12 items.Please assist me.
n = 1.
LOOP AT it1 WHERE vbeln = it-vbeln.
CONCATENATE 'LIPSD-G_LFIMG(' n ')' INTO a.
PERFORM bdc_field USING a it1-G_LFIMG.
n = n + 1.
IF n gt 12 .
PERFORM bdc_field USING 'BDC_OKCODE'
'=P+'.
n = 1.
PERFORM bdc_dynpro USING 'SAPMV50A' '0220'.
ENDIF.
ENDLOOP.
PERFORM bdc_dynpro USING 'SAPMV50A' '0220'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=SICH'.
Thanks
BalaHi BP,
If i give P++,it directly goes to the last page.It was not update the middle records like13,14th items.
Thanks
Bala. -
Hi All,
Recently my system got update from MS now its running on Windows 8.1. After updating my games are not working properly
the games were running at very low FPS even key event and mouse event are lately taken. Even i updated drivers still its not working.
In windows 8 all games were running very smoothly. Only after updating i am seeing this issue.VRA
PC configurations :
1) OS : Windows 8.1
2) RAM : 4gb
3) Processor : core i3
4) VRAM : 2gb
5)VCARD : AMD radeom
Please help i am missing my gamesAre the display drivers updated, that are compatible with Win 8.1?
Arnav Sharma | Facebook |
Twitter Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members
reading the thread. -
After Security updation of Windows 7 in Boot Camp (Mac Book Pro with Retina Display) on 13-Nov-2013, Windows 7 Desktop Gadgets are not working properly.
This is boot camp problem, because in other normal notebooks (e.g. SONY VAIO, Lenovo with Windows 7) the gadgets are working normally.
I am attaching the screen shot of Desktop Gadgets and Security updates of Windows 7.
Kindly solve this issue ASAP.
Shailendra Gupta
<edited by host>You are not addressing Apple, but a community of unpaid volunteers. So ASAP won't cut it. Also, you should refrain from posting personal information (like your email address) in the body of your comments, as this is part of the community usage guidelines.
Have you reinstalled the latest Boot Camp Windows 7 drivers, just in case Microsoft overwrote some of them during the Windows 7 security update?
If you want to communicate issues with Apple about Boot Camp and OS X, click on the link. Just don't hold your breath on receiving a response. -
CIN: Items are not displayed while updating the RG1 Register using T Code:
Hi Experts,
Items are not displayed while updating the RG1 Register using T Code: J1I5.
System is not showing any error message.
Can any one explain to update the RG1 Register?
Thanks
ChandraHi,
dont go the table again and again . the table is updated at intial stage only for stock update but not when SAP is running.
In day to day bussiness the flow is as follows:
Production - MB31 - to Unres stock
Sales - VL02n - PGI - to customer - i.e out of unres stock
Every day u can run TC J1i5 once in a day as decided and update the register so all transactions which have happend in that day gets updated i.e both input and output.
and this will happen every day.
hence dont use table as it is only for intial data upload i.e just before golive.
Hope i am clear.
krishna -
I am having multiple issues with syncing my iphone calendar and outlook calendar on my laptop
I mostly enter the original items on my laptop
There are often 1 hour time differences in the entries on the 2 devices and sometimes events that have been amended are not updated on iphoneThis sounds like an error in Time Zone support. The time zone needs to be the same in Outlook as well as the phone.
-
Hi Team,
I have created Administrator -approved Infopath form template to my site and activated same template in CA.
I have used this template in one of my Form library and i can able to submit the Form with success to the library.
when i click "View Item" or "Edit Item" of the form it throws , "One or more field types are not installed properly. Go to the list settings page to delete these fields." error message.
I have refered my log files also but there is no useful information in that, please find my logs for your reference.
w3wp.exe (0x2D7C)
0x3790
SharePoint Foundation
Logging Correlation Data
xmnv
Medium
Site=/sites/Prototypes
w3wp.exe (0x2D7C)
0x3790
SharePoint Foundation
Monitoring
b4ly
High
Leaving Monitored Scope (PostResolveRequestCacheHandler). Execution Time=8.51588679566816
w3wp.exe (0x2D7C)
0x3790
SharePoint Foundation
General
8kh7
High
One or more field types are not installed properly. Go to the list settings page to delete these fields.
w3wp.exe (0x2D7C)
0x3790
SharePoint Foundation
General
8sl1
High
DelegateControl: Exception thrown while adding control 'ASP._controltemplates_publishingconsole_ascx': One or more field types are not installed properly. Go to the list settings page to delete these fields.
w3wp.exe (0x2D7C)
0x3790
SharePoint Foundation
General
8kh7
High
One or more field types are not installed properly. Go to the list settings page to delete these fields.
w3wp.exe (0x2D7C)
0x3790
SharePoint Foundation
Runtime
tkau
Unexpected
System.Runtime.InteropServices.COMException: One or more field types are not installed properly. Go to the list settings page to delete these fields.
at Microsoft.SharePoint.Library.SPRequestInternalClass.GetListItemDataWithCallback2(IListItemSqlClient pSqlClient, String bstrUrl, String bstrListName, String bstrViewName, String bstrViewXml, SAFEARRAYFLAGS fSafeArrayFlags, ISP2DSafeArrayWriter pSACallback,
ISPDataCallback pPagingCallback, ISPDataCallback pPagingPrevCallback, ISPDataCallback pFilterLinkCallback, ISPDataCallback pSchemaCallback, ISPDataCallback pRowCountCallback, Boolean& pbMaximalView)
at Microsoft.SharePoint.Library.SPRequest.GetListItemDataWithCallback2(IListItemSqlClient pSqlClient, String bstrUrl, String bstrListName, String bstrViewName, String bstrViewXml, SAFEA...
w3wp.exe (0x2D7C)
0x3790
SharePoint Foundation
Runtime
tkau
Unexpected
...RRAYFLAGS fSafeArrayFlags, ISP2DSafeArrayWriter pSACallback, ISPDataCallback pPagingCallback, ISPDataCallback pPagingPrevCallback, ISPDataCallback pFilterLinkCallback, ISPDataCallback pSchemaCallback, ISPDataCallback pRowCountCallback, Boolean& pbMaximalView)
w3wp.exe (0x2D7C)
0x3790
SharePoint Foundation
Monitoring
b4ly
Medium
Leaving Monitored Scope (Request (GET:http://test-sharepoint:80/sites/Prototypes/TRT/TRTLibrary/Forms/EditForm.aspx?ID=47&Source=http%3A%2F%2Ftest%2Dsharepoint%2Fsites%2FPrototypes%2FTRT%2FTRTLibrary%2FForms%2FAllItems%2Easpx&RootFolder=%2Fsites%2FPrototypes%2FTRT%2FTRTLibrary&ContentTypeId=0x01010100E7EE25E5A6898C4587A6B52C808EF03300FD54861D587A7E43BA3E2E6D392A3526&IsDlg=1)).
Execution Time=32.443369199158
w3wp.exe (0x08E4)
0x2C58
Access Services
Data Layer
8jg2
Medium
ResourceManager.PerformCleanup: Disk Manager: CurrentSize=0.
w3wp.exe (0x08E4)
0x2C58
Access Services
Data Layer
5pbr
Medium
ResourceManager.EvictUnusedItems: Disk Manager: Going to evict unused items. CurrentSize: 0.
w3wp.exe (0x08E4)
0x2C58
Access Services
Data Layer
5pbs
Medium
ResourceManager.EvictUnusedItems: Disk Manager: After unused items eviction. CurrentSize: 0
Diff:0.
w3wp.exe (0x2D7C)
0x0774
SharePoint Foundation
Topology
e5mc
Medium
WcfSendRequest: RemoteAddress: 'http://test-sharepoint:32843/4ac2daef5ffe4850be08bd7bbebb5ac2/MetadataWebService.svc' Channel: 'Microsoft.SharePoint.Taxonomy.IMetadataWebServiceApplication' Action: 'http://schemas.microsoft.com/sharepoint/taxonomy/soap/IDataAccessReadOnly/GetChanges'
MessageId: 'urn:uuid:dcba94c3-2764-428c-b44f-60e703328ceb'
w3wp.exe (0x08E4)
0x2E24
SharePoint Foundation
Topology
e5mb
Medium
WcfReceiveRequest: LocalAddress: 'http://test-sharepoint.anca.com.au:32843/4ac2daef5ffe4850be08bd7bbebb5ac2/MetadataWebService.svc' Channel: 'System.ServiceModel.Channels.ServiceChannel' Action: 'http://schemas.microsoft.com/sharepoint/taxonomy/soap/IDataAccessReadOnly/GetChanges'
MessageId: 'urn:uuid:dcba94c3-2764-428c-b44f-60e703328ceb'
JeevaHello,
Is there any other content type on library or check if there is any duplicate column? Could you please also show us your library columns detail? (pic is also fine of lib settings page)
If you have any ""Property Promotion" column then SP create those columns as site column and associate them with this template so check "Allow management of content types" for that form library as well.
Hemendra:Yesterday is just a memory,Tomorrow we may never see
Please remember to mark the replies as answers if they help and unmark them if they provide no help -
Hi ,
I am working in sharepoint 2013, This is a custom timer timer Execute method where i am moving a document item from one library to other once its expired,it was running fine and suddenly giving following error:-
One or more field types are not installed properly. Go to the list settings page to delete these fields.<nativehr>0x81020014</nativehr><nativestack></nativestack>
StackTrace = " at Microsoft.SharePoint.SPGlobal.HandleComException(COMException comEx)\r\n at Microsoft.SharePoint.Library.SPRequest.GetListItemDataWithCallback2(IListItemSqlClient pSqlClient, String bstrUrl, String bstrListName,
String bstrViewName, String bstrView...
I have filled all the meta data(site column) for the item but still same error, Please help me out as i have no clue why it is giving this error
public override void Execute(Guid targetInstanceId)
SPSecurity.RunWithElevatedPrivileges(delegate()
using (SPSite site = new SPSite(sourceUrl))
using (SPWeb web = site.OpenWeb())
//gets the document lib
SPList listFrom = web.Lists[sourceList];
//gets the expired documents items
SPQuery query = new SPQuery();
query.ViewFields = "<FieldRef Name='Expiration_x0020_Date'/>";
query.Query = @"<Where><Leq><FieldRef Name='Expiration_x0020_Date'/><Value Type='DateTime' ><Today /></Value></Leq></Where>";
SPListItemCollection items = listFrom.GetItems(query);
//if expired items found
if (items.Count > 0)
SPFile oFile = null;
foreach (SPListItem item in items)
string strfile = item.File.Name;
oFile = web.GetFile(sourceList + "/" + strfile);
//oFile.CopyTo("Archive/" + strfile);
oFile.MoveTo(destinationList + "/" + strfile);Hi,
I think the issue is related to the internal name of the Expiration Day.
In the caml query code lines, we should use the right internal field name to retrieve and filter the list items.
To avoid such mistake, we can use the CAML Designer tool to generate the caml query code.
We can download the tool here: http://www.camldesigner.com/?p=594
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support -
We have a publishing website in SharePoint 2010. There are total 4 environments - Development, Test, Stage and Production. For some enhancements, we had to create some new lists and libraries. When we moved changes from Development to Test environment, everything
worked fine. Relevant lists and libraries in lower environments were saved as templates (in .stp format) including content, imported to higher environment, lists/libraries were created in higher environment using imported templates.
Things worked fine from Development to Test. We did similar exercise from Test to Stage environment. Now in Stage, when we access some pages, we get error message - "One or more field types are not installed
properly. Go to the list settings page to delete these fields.". ULS logs don't tell which exact list has got problems.
On searching for this error, I got many articles that explain how this could happen when we migrate from SharePoint 2007 (MOSS) to 2010. Though our case different (as all our environments are in 2010), we still tried following steps.
De-activate 'SharePoint Server Publishing Infrastructure' Site Collection feature
Go to https://site-name/relationships%20list/allitems.aspx. This is a hidden list. Delete this list.
Re-activate 'SharePoint Server Publishing Infrastructure' Site Collection feature.
Make sure that new hidden list with one item is created at https://site-name/relationships%20list/allitems.aspx
However, this didn't help as we are still getting same error message. Appreciate if someone can suggest how this issue can be resolved.
Following are ULS logs:
Unable to execute query: Error 0x81020014
One or more field types are not installed properly. Go to the list settings page to delete these fields.
System.Runtime.InteropServices.COMException: One or more field types are not installed properly. Go to the list settings page to delete these fields.
at Microsoft.SharePoint.Library.SPRequestInternalClass.GetListItemDataWithCallback2(IListItemSqlClient pSqlClient, String bstrUrl, String bstrListName, String bstrViewName, String bstrViewXml, SAFEARRAYFLAGS fSafeArrayFlags, ISP2DSafeArrayWriter pSACallback,
ISPDataCallback pPagingCallback, ISPDataCallback pPagingPrevCallback, ISPDataCallback pFilterLinkCallback, ISPDataCallback pSchemaCallback, ISPDataCallback pRowCountCallback, Boolean& pbMaximalView)
at Microsoft.SharePoint.Library.SPRequest.GetListItemDataWithCallback2(IListItemSqlClient pSqlClient, String bstrUrl, String bstrListName, String bstrViewName, String bstrViewXml, SAFEARRAYFLAGS fSafeArrayFlags, ISP2DSafeArrayWriter pSACallback, ISPDataCallback
pPagingCallback, ISPDataCallback pPagingPrevCallback, ISPDataCallback pFilterLinkCallback, ISPDataCallback pSchemaCallback, ISPDataCallback pRowCountCallback, Boolean& pbMaximalView)
Thanks!Hi Shrishail ,
Some time this issue occurs if you have any custom filed types in the list or library and that field type is not installed on server .
Can you please check that if you are having any custom field types column on the list and library and if that is the case you need to install that field type on the server. sometimes it happens if field types are not properly deployed / Installed then
you have to uninstall that field types (retract solution) and deploy it again.
Thanks,
Ujjwal -
New tabs are not updating the names of the sites they have loaded. When I open a new tab and load a site, the tab simply stays named "New Tab". When I open a link in a new window, it shows "Connecting..." even while its fully loaded.
This issue can be caused by an extension that isn't working properly.
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
* [[Troubleshooting extensions and themes]]
Maybe you are looking for
-
High number of threads and high CPU usage on a single instance
Without any apparent reason, in some moments of day the website reports an increment of the HTTP Queue Length from an average of 10/20 queued requests to 100/200 and more. In that period of time the Average Response Time increases but the number of t
-
NonStandard Month as Crosstab Columns - CR8.5
I have a crosstab report that currently shows items (rows) by customer (columns). They now wish to use that report to show columns as months. This is easy enough with regular calendar months. However their months are non-standard calendar months, f
-
Unable to update to 2.1
I have recently updated iTunes to version 8, and when I try to download and install the 2.1 update for iPod Touch everything seems to go fine -- the 200+ MB file starts downloading -- until the very last 100 kB, when the download stops with an alert
-
Hello When confirming production orders the value posted to inventory (credit prod order, debet inventory) is not understandable for Kmats. We are using valuated sales order stock. It is not a problem for std materials for which the value is the std
-
Qual a razão de aparecer sempre esse erro 5107 quando estou introduzindo as informações na minha conta da Apple Store?