Items detected on your pc require further analysis

Hello,
since last week FEP is displaying on our desktop a alert that says:
"Items detected on your pc require further analysis. By sending the files listed below, you can help Microsoft analysts determine whether these systems are malicious."
the application is is picking up a knon application that we use and it has not been updated at all.
Do you know what is causing this? how can we resolve this?
Thanks.

Hi,
Thank you for your patience and support.
I am trying to involve someone familiar with this topic to further look at this issue. There might be some time delay. Appreciate your patience.
Thank you for your understanding and support.
Best Regards
Quan Gu

Similar Messages

Items Detected

Every morning, after overnight Microsoft virus scan, message states that "Items Detected on PC Require Further Analysis" and to Send Selected or Don't Send. However, doesn't allow me to Send Selected, only Don't Send. How do I resolve this?
RAM 50

Hi,
Please submit a sample to Microsoft from the link below.
https://www.microsoft.com/security/portal/submission/submit.aspx
If you contact the support team, you could refer them to the submission.
Best Regards,
Joyce
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

SharePoint Performance services requirement- SQL analysis services

Hi Everyone,
I have a question I was hoping someone would verify the answer to. One of the requirements for setting up Performance Point services is for there to be a SQL analysis service instance that sharepoint interacts with. This is particularly true if want to create dashboards
that are Dynamic(Please correct me if I am wrong).My question is, must SQL analysis in sharepoint mode be used instead of any other form of SQL analysis services, for performance point services to work at all or is it the case that other forms of
SQL analysis services mode( ie Tabular and Multidimentional) will work but function will be limited?
Thanks,
Dominic

Hi Dominic,
According to your description, you need to know if SQL analysis in SharePoint mode is must or we can use other form of SQL analysis services in PerformancePoint Services in SharePoint Server, right?
PerformancePoint Services in SharePoint Server 2013 supports PowerPivot models as a data source. You can use data in a PowerPivot model and build interactive dashboards using PerformancePoint Services features such as Key Performance Indicators (KPIs), Scorecards,
Analytic Charts, Analytic Grids and Filters. So if you need to use PowerPivot models as a data source, then first you need to install PowerPivot for SharePoint which is an Analysis Services instance.
In your scenario, what do you mean by "other form of SQL analysis services"? Pleas elaborate it, so that we can make further analysis. Here are some useful links for you reference.
https://msdn.microsoft.com/en-us/library/jj219067.aspx
https://technet.microsoft.com/en-us/library/ff191197.aspx
Regards,
Charlie Liao
If you have any feedback on our support, please click
here.
Charlie Liao
TechNet Community Support

The iPod "TAMI DUGARD's iPod" cannot be synced because there is not enough free space to hold all of the selected items (additional 146.5 MB required). this was from my ipod mini trying to sync and it wont let me sync so... could u help me i really needit

I really need help because my ipod mini isnt working correctly my mom just gave it to me and The iPod “TAMI DUGARD’s iPod” cannot be synced because there is not enough free space to hold all of the selected items (additional 146.5 MB required). it says this. Over and over when i try to sync it too my itunes what does this mean and its a 4gb

It means you try to sync an amount of content to your iPod Mini that exceeds for 4 GB, or the amount of space that is available on the iPod. See this article for more details.
How to sync music to your iPod when your library is bigger than your iPod storage space
B-rock

Error in sales order when selecting a warranty item in configurator 'Please enter required information - Service Reference Type Code'

Error in sales order when selecting a warranty item in configurator 'Please enter required information - Service Reference Type Code'
Not able to book the sales order because of this issue

Order Management does not support the inclusion of optional service items in a configured Model BOM (see Support article #1296751.1 for more detail). Allowing for such would therefore require customization.
As you've found, there's no modeling restriction that prevents you from creating a Model BOM that includes optional service items, nor is there any problem with creating a Configurator Model for it. And required service items (such as a warranty item that is a required child of an optional BOM component) do not present a problem; they have nothing to do with Configurator, and would never appear as sub-lines in OM. The problem arises in OM, which requires that any service item be "associated" to the item it's "servicing". OM does not automatically make such an association with service sub-lines, even though it might be argued that an association may be inferred by the BOM structure (i.e., OM does not assume that an optional service sub-line is necessarily associated, from a service standpoint, with its BOM parent). OM customization is therefore required in order to hook any service item up to its corresponding product item. Many customers who configure service along with product have implemented such a customization.
(Another gap in such a solution that may be relevant to you is that for an included optional service item requiring recurring billing, Order Management does not create the requisite Service Contract. Customers have likewise developed customizations to address this, as well.)
As this is not specifically a Configurator matter (you could have created your order without using Configurator at all, and you would have experienced the exact same behavior), please do not take my explanation as being either authoritative or comprehensive (I am a Configurator expert, and only knowledgeable enough about Order Management to be dangerous). It would be advisable for you to seek more detailed information/recommendations from the Order Management forum.
Eogan

Cannot sync ipad. statement "ipad cannot be synced because there is not enough free space to hold all of the selected items (additional 157.3 mb required) There is 1.86gb available on ipad and i am trying to remove items. any thoughts...

annot sync ipad. statement "ipad cannot be synced because there is not enough free space to hold all of the selected items (additional 157.3 mb required) There is 1.86gb available on ipad and i am trying to remove items. any thoughts...

If you haven't changed your sync preferences, meaning that you are not trying to add more content from the last time that you synced with iTunes, try quitting iTunes, restart your computer and then try again.
If you are trying to add more content to the iPad than what you had before, you can only use so much of the available storage capacity that is left on the device. You probably need to leave about 10% of the space free so if you have a 16GB iPad, you might not have enough space left to sync that content that you are trying to sync.

The iPad "Grant" cannot be synced because there is not enough free space to hold all of the selected items (additional 5.67 GB required). What do I do?

The iPad “Grant” cannot be synced because there is not enough free space to hold all of the selected items (additional 5.67 GB required).
What do I do?

I believe the reference is to space on your hard drive, not on your iPhone.
Freeing Up Space on The Hard Drive
See Lion's Storage Display.
You can remove data from your Home folder except for the /Home/Library/ folder.
Visit The XLab FAQs and read the FAQ on freeing up space on your hard drive.
Also see Freeing space on your Mac OS X startup disk.
See Where did my Disk Space go?.
See The Storage Display.
You must Empty the Trash in order to recover the space they occupied on the hard drive.
You should consider replacing the drive with a larger one. Check out OWC for drives, tutorials, and toolkits.

We haven't a model ABC classification into Further Analyses

Hello guys,
We have BW 7.0 and we want to use Data Mining. We don't have an ABC model classification in the Further Analyses although we have all models Weighted, Table Scoring, Regression analysis, Prediction with decision tree and Prediction with cluster model.
I don´t understand why we don´t have the ABC model classification.
Can anybody help me?
Thanks

I have also 'upgraded' from a 6110 Navigator to a 6210 Navigator and found the newer model to be considerably harder to use.
In particular, your point #4 about not having a warning beep when issuing a voice command while in bluetooth/car mode is my number 1 gripe as it makes my cars bluetooth and phones voice dialling completely useless.
If you have found a solution to that particular issue please let me know.

Hide Particular Item Group from Selection Criteria of Sales Analysis Report

Hello Experts,
Is this possible to Hide Particular Item Group from Selection Criteria of Sales Analysis Report?
I have one Item Group as 'Special Items'.
Now, when I open Item wise sales analysis report, I want to hide above mentioned group from selection criteria.
Thanks in advance.
Best Regards,
Pankit Sheth

Hi,
1. Not possible to put validation for selection criteria windows.
2. In standard, I don't think it is possible to hide only one item group.
3. Alternatively don't give authorization to user for running sales reports. If still need create customized query and ask user run every month.
Thanks & Regards,
Nagarajan

USEREXIT to adjust the rebate credit memo request to your own require

We are using function module SD_BONUS_CREDIT_NOTE_CREATE in one of our rebate program.
This Functional provides the option to use USEREXIT to adjust the rebate credit memo request to your own requirements.
With Present form of functionl module it take standard doc type to create the rebate credit memo request.
So Question here which are userexit we have in this FM which can be used to create the rebate credit memo request to our requirement.
Has any body used this FM before to this length..
appreacite your help
Thanks
rao

Hi Serma,
I haven't use this FM. I only can advise you how to find user exits in this (any) FM.
Open your FM via SE37 and then try to find in this Function Group any CALL CUSTOMER-FUNCTION 'xxx' ..., where xxx is a 3-digit number which refers to the relevant FM EXIT_<FG>_xxx.
<FG> is the name of the Function group to which the FM belongs to.
When you find such an EXIT-Function, take a look at the parameters. When you find parameters which satisfy your needs, go ahead and build your EXIT enhancement in the predefined ZX-Include (you can find this inside the FM EXIT_<FG>_xxx).
I hope this helps,
Heinz

Virus Detected (403), Your file could not be uploaded because it contains a virus.

From a Windows 7 Ultimate PC I tried to upload a PDF portfolio containing 35 PDFs. The upload failed with the message "Virus Detected (403), Your file could not be uploaded because it contains a virus."
It is highly unlikely that this PDF portfolio or its 35 PDFs contain a virus. It passed a scan by Microsoft Security Essentials. Any suggestions?
Bill

Hello,
I've got the same 403 error when I want to upload a ebook (purchased on peachpit, see this url for ebook), but when I scan it (windows 8 / avast) no virus found.
Olivier

Crystal Reports prompt issue on export: "The report you requested requires further information"

I have searched through forums for a solution but none seem to work for me.
I have an ASP Webform/MySql application which displays Crystal Reports.
The ones which do not require a user to enter a parameter display fine and I am able to click on export on the CR toolbar and download, e.g. .pdf format.
On the report that require a user to enter a parameter, the report renders fine but when I click on the export button, i get the prompt:
"The report you requested requires further information"
asking for DB login credentials. How can I avoid this?
My Code:
Aspx page:
<%@ Register Assembly="CrystalDecisions.Web, Version=13.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" Namespace="CrystalDecisions.Web" TagPrefix="CR" %>
<div>
          <CR:CrystalReportViewer Width="960px" ID="CrystalReportViewer1" runat="server" AutoDataBind="true" />
</div>
protected void Page_Load(object sender, EventArgs e)
         if (Request.QueryString["report"] != null)
                string reportToGet = Convert.ToString(Request.QueryString["report"]);
                switch (reportToGet)
                        case "payslip":
                        PaySlip();
                        break;
                        case "pastpayslip":
                        PanelPastPaySlip.Visible = true;
                        break;
                       default:
                       break;
protected void btnSearch_Click(object sender, EventArgs e)
      if (txtDate.Text != null || txtDate.Text != string.Empty)
      if (DateTime.TryParseExact(txtDate.Text, "yyyy-MM-dd", CultureInfo.InvariantCulture,
      DateTimeStyles.None, out date))
      PastPaySlip();
private void PastPaySlip()
            // Some code....
            PayMasterDataSetTableAdapters.pastpayslipcasualviewTableAdapter ta =
                new PayMasterDataSetTableAdapters.pastpayslipcasualviewTableAdapter();
            PayMasterDataSet.pastpayslipcasualviewDataTable dt = new PayMasterDataSet.pastpayslipcasualviewDataTable();
            ta.FillBy(dt, userId, businessId);
            cReport = new ReportDocument();
            string reportPath = Server.MapPath("~/Views/CasualLabour/Reports/PastPaySlip.rpt");
            cReport.Load(reportPath);
            cReport.SetDataSource((DataTable)dt);
            cReport.SetParameterValue("Date", date);
            cReport.SetDatabaseLogon("userID", "password", "server", "database");
            CrystalReportViewer1.ReportSource = cReport;
            CrystalReportViewer1.ReuseParameterValuesOnRefresh = true;
I am using CR V. 13.0.9 and VS 2013 Update 2

This is because almost any action on the viewer result sin a postback. This includes paging, zooming, drilling exporting and printing. E.g.; you will have to place the report in session. See the following KB for how to:
1985571 - How to use sessions in web applications using the Crystal Reports viewer (the complete code)
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

Adobe Revel? I have forgotten: the URL; my username and password. How do I ask Adobe for these items? Thanking your reply !!!

Adobe Revel? I have forgotten: the URL; my username and password. How do I ask Adobe for these items? Thanking your reply !!!
[email protected]

Dave,
No worries, this link will help you with your issues. You do have a revel account with that email, so resetting your password should be all you need to do. Just click on the "I forgot my password" link on the web page listed below:
http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html
Once you reset your password, you should be able to login to revel at adoberevel.com on a browser or from one of our apps on mac, ios, win8, or android.
Pattie

Test stand crashes: "test stand has detected that your script debugging"

05-01-201203:18 PM
Hi everyone. I am setting up a new installation of Test stand and writing my first sequence with an existing sequence of legacy code.
When I run the sequence and stop on the call to the DLL, and then step into the dll and I get this error:
test stand has detected that your script debugging settings might cause visual studio to hang when attaching to the teststand process to perform this step into operation.
To fix this problem, open internet explorer, select tools>>Internet options>> Advanced, check Browsing>>Disabl script debugging, click okay, and restart your sequence execution.
The message is vague and it is indermanent as to whether I should "enable" or "disable" Script debugging so I tried both. Test stand then crashes again and I get the same error.
Do I need to reboot after each crash? I'll try that next. Any ideas on how to make this error go away?
Thank you for your help.
Richard

This is a duplicate. Please go here instead:
http://forums.ni.com/t5/NI-TestStand/quot-test-stand-has-detected-that-your-script-debugging-quot/td...

How do you find if a LOGICAL DATABASE exists for your program requirements?

how do you find if a LOGICAL DATABASE exists for your program requirements?
please explain.

Hi Ramana
One may not accurately pin point the LDB for ones requirement. But there some ways.
1. You can find with respect to the application you are working on. You can refer to the Table field TRDIR-APPL. The following are the values it has. So suppose if you have requirement for HR you can search for application 'P' :
A Assets accounting
D DASS control station
E RIVA
F Financial accounting
G General Ledger
H Human resources planning
I Maintenance
J RK projects
K Cost accounting
L Warehouse management
M Materials management
N Hospital
P Human resources
Q QSS
S System
V Sales
Y Customer head office
Z Customer branch
2. You can see the package in which your current is stored in SE80. Under the same package you can see if there are any LDBs.

Items detected on your pc require further analysis

Similar Messages

Maybe you are looking for