Items greyed out after upgrading and migrating to Sharepoint 2013 - Open and Check Out + Manage Document Option
Hi there,
Following a migration to SharePoint 2013, the follow options have been disabled (Open and Check out + Manage) (see below). These are critically important functions and make it very hard to make SharePoint a useable interface. Any guidance on how to resolve
these issues is greatly appreciated. This is not a branded website, and there has been no changes made to the standard interface.
Kind regards
Jarrad Koppen
I'm not sure what the easiest way is either. First, I would try to create a new site collection with a new library and see if you get the same behavior. If not, then its something in the upgrade process. If it does that also would point
to something being wrong in the way that javascript is being executed.
If it is happening everywhere I suspect you'll have to start tracing javascript using something like IE developer's toolbar to see why the status on those buttons isn't changing when you select a document. I'm not sure what else to suggest.
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem.
Similar Messages
-
After upgrading to the new iOS7, I can't send out sms, I can receive sms, can make and receive call. I have already contacted my network provider, we changed sim card, I have tried to put my sim on other phone, and it's perfectly working. Help me pls.
To be honest not being able to send or recieve messages and data is a carrier issue, not a phone issue since u said that your calls are working, if i were you my first course of action would be to get a new sim card from virgin mobile, or to restore the device as new one more time, if you restore the device as new AND get a new sim card from your carrier and those features still dont work, i would take the device to an apple store
-
After upgrade to lion, system reject previous account and password. Nothing I can do. Anybody help?
After upgrade to lion, system reject previous account and password. Nothing I can do. Anybody help?
I have just expereinced the same issue. I have a work around for you.
If you have a Snow Leopard Install CD you can boot from that by holding the C key upon boot up or hold down the option key and select the install CD.
Once launched select continue and then select your language. You will then have access to a tools/utilities menu where you can reset passwords. You select you System Disk and you will notice that you accounts are still missing however you should have access to re-set the root account / pw. Set it to a secure password - after all this is the highest level account on your machine.
Once done - restart into lion again and login into the root account. Username root with password you specified earlier. Once logged into the system - you should still find your old user folder still intact. I would suggest re-naming this account and add suffix _original if you intend on creating a new account with the same name. The username of the folder is based on the short name you input when you create an account.
You can then go into system preferences / users and groups and create a new account with the same short name. After this - I renamed the new user account to _delete and renamed my original account to its former name by removing the _original (as i kept the same short username) Log out and login with your original account - it may ask you to sync your keychain if you have changed your password from the original - in this case provide the previous password.
This worked for me - good luck.
I agree this is unaccaptable for Apple to release an upgrade with a bug like this. Good luck - hope it works for you -
Good evening,
after upgrading Iphoto 9.5 a page opened requiring to upgrade my library. As it did not work out,for fear of losing all my pictures I loaded Iphoto 9.4.3 with Time machine but I had lost quite a few photos. As a matter of fact, after searching , I found them In Photo library in 'images' on my hard drive. When I double click, 9.5 appears with all my pictures. Therefore, I would like to use 9.5 just by by clicking on the icon down my finder and not by being obliged to open my hard drive.
Would you please tell me what I should do. Thank you.
Best regards,
RobertHuh?
As it did not work out,for fear of losing all my pictures I loaded Iphoto 9.4.3 with Time machine but I had lost quite a few photos. As a matter of fact, after searching , I found them In Photo library in 'images' on my hard drive. When I double click, 9.5 appears with all my pictures.
So, you have restored 9.4.3 from Time Machine but can see all your pictures in 9.5?
Do you have two version of iPhoto on your Machine?
And if you didn't update the Library, ("as it did not work out,") how can you see things in 9.5?
So, whatever set up you have is confusing. -
My IMac 21.5 mid 2010's HD is going bad on it, after upgrading to mavericks it slowed way down and after it shut off and now won't come back on, I call apple support and they told me to bring it in but the nearest store is about two hours away. They said I need it to erase my hard drive but I have too many family pics on it.
would Seagate Barracuda ST2000DM001 2TB Serial ATA Hard Drive - 7200RPM, 64MB, SATA 6Gb/s worked on it? I could replace the internal and get an enclosure for the original until I get the pics out of it?
Please advise, it's like five years of family pics I don't wanna loose them and I am worried.
Thanks
Al FlorezA Brody,
I really apprecate your very quick respond, Its too late to back up as of now, my hard drive wont load at all so I cannot follow your instruction to back it up. Learn a hard lesson but I will from now on following your link.
Also my hard drive it is not available to do the free exchange program.
I read the OWC instruction on how to replace the drive I was just wondering if the 2TB would work on it instead of the 1 TB they offer, I specifically asked for the Seage Barracuda because I had great experiences with it on PCs.
Again, Thank you -
5 crashes after upgrade to ios my address book immediately and I can not access emails, because the password is wrong and when I go to mail settings crashes the application immediately from
Same issue also. Occurring both on my iPad 2 and iPhone 4 after upgrading to ios 5
By the way, Mattban and Sancasslano, are either of you also experiencing any of the following issues:
* Problems with Contacts either crashing or listing no names
* Problems with turning iCloud on or off for application under Settings->iCloud... On both mine I just get a pop up saying that iCloud is being turned off but Contacts then just locks up.
* General problems when trying to synch applications on the iPad or iPhone over iCloud?
I am wondering if all these issues are in someway related to and whether it is worth trying to turn off iCloud somehow, though I cannot work out how this can be done once set up. -
After upgrading to Lion, I went to open Mail and received the message that it needed to upgrade my Mail database - this may take a few minutes. The bar shows it is about 1/5 along and has been there for over 10 hours.
I tried quitting and starting again but it just jumps back to the same spot.It is quite large, but I have tried two of the fixes suggested and things now seem to be moving along.
(I was unable to seach properly before which is why I posted the question - it was a bit of a panic) -
After upgrading to Mountain Lion, I repurchased Garageband and I can't get passed the complete installation. I've read through several posts that all reference the "com.apple.garageband.plist" solution. I don't seem to have the referenced .plist. Any solutions or suggestions?
Did you upgrade from SnowLeopard?
I can't get passed the complete installation
What exactly is happening? Is GarageBand trying to download over and over again?
all reference the "com.apple.garageband.plist" solution. I don't seem to have the referenced .plist.
The property list stores your preferences, but also the settings from the last run of the application. If that file is corrupted in some way, you might see third behaviour.
You must have this file, for it will be recreated automatically, if it is missing, or you have a permissions problem with your user library.
Perhaps you did look in he wrong place.
in MacOS 10.7. or later the User Library is hidden. To find the Preferences Files use the Finder's "Go" menu:
Quit GarageBand, if it is running.
Click onto you Desktop to bring the Finder forward.
In the Finder Menu press "Go" and hold down the "option/alt" key, until your user library appears in the drop-down menu
Select "Library" and in the Finder window that opens navigate to the "Prederences" folder; move com.apple.garageband.plist to the Desktop.
Log off and on again (don't skip that step!). Retry GarageBand and see if it GarageBand is now downloading the missing content properly.
If that does not fix the problem, post back and explain in more detail what the download problem is.
Why did you "repurchase" GarageBand? If you already owned GarageBand '11, it should be unnecessary.
Regards
Léonie -
HT1386 After upgrading iTunes to 10.7.0.24 and upgrading my iPad to 6.0.1 WiFi Sync no longer works.
After upgrading iTunes to 10.7.0.24 and upgrading my iPad to 6.0.1 WiFi Sync no longer works.
Followed the FAQ's on the Apple Support but no joy.
Anyone knows what more I can do?In iTunes under the Store tab try Authorizing the Computer
-
I am trying to open Itunes after an upgrade to itunes--it won't open and now says MSVCR80.dll is missimng. Where do I get this missing DLL. Also says Error 7 when trying to open (windows error 126)?? I am on Windows 7 if that matters.Help please
See the user tip: https://discussions.apple.com/docs/DOC-6562 for the most complete information.
-
After upgrading to the latest ios my imessage and facetime apps do not function.....any one having similar difficulties?
Start your '''Computer''' in safe mode. Then start Firefox. Try '''Safe''' web sites.
Starting The Computer In Safe Mode;
If running, turn your computer off.
Remove any disks and thumb drives that are in your hard drives or ports.
Now start your computer but also;
'''Windows; '''Press the <F8> key repeatedly.
'''Mac: '''Hold down the Shift key.
'''Linux; '''Using the command line, Linux/Unix computers can be booted
into various run levels that determine which resources are loaded.
For example, "runlevel 1" is typically the equivalent to Windows and
Mac safe modes.
* Source; '''[http://encyclopedia2.thefreedictionary.com/Linux+Safe+Mode Safe Mode; Free Online Encyclopedia]'''
When the '''Boot''' menu is displayed, release the key you were pressing.
You must now choose what mode to use. The most used are;
* Safe Mode; The computer runs with only a minimum set of programs.
* Safe Mode '''With '''Networking; Same as above, but with internet access. -
I am using iPhone 5C. My wifi is extremely slow after upgrade to ios8. Buffering online video and songs taking forever. What's going on?
I have same problem. Reboot helps for a few minutes.
-
we have a "new nano 5" and after fully recharging it, it drains out after 24 hrs with a few hrs use and the message "need to restore in itunes" appears. what gives?
akemma wrote:
we have a "new nano 5"
iPod Models -
After upgrading to ios 7.2 my Ipad froze. I had no option but to restore all settings, In doing so I lost treasured photos. Can I retrieve them?
You can restore from iTune or iCloud backup if you have one.
-
Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer. I have a pretty simple system with only a few plug-ins, which are usually not in operation. I have 12GB of RAM in my Windows 7 PC. I could illustrate these problems with screen shots if you would tell me how to submit screen shots. Otherwise I will try to describe the problems in words.
The problem is clearly cumulative, growing worse as usage time passes. Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond. In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
To experiment I created a new catalog of 1100 images. After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data. (I have a screen shot to show this.) CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong. I could also send screen shots of this data.
At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR. This is not normal. I hope you can find the cause, and then the solution. If you would like to see my screen shots, tell me how to submit them.
Ollie
[email protected]Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer. I have a pretty simple system with only a few plug-ins, which are usually not in operation. I have 12GB of RAM in my Windows 7 PC. I could illustrate these problems with screen shots if you would tell me how to submit screen shots. Otherwise I will try to describe the problems in words.
The problem is clearly cumulative, growing worse as usage time passes. Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond. In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
To experiment I created a new catalog of 1100 images. After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data. (I have a screen shot to show this.) CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong. I could also send screen shots of this data.
At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR. This is not normal. I hope you can find the cause, and then the solution. If you would like to see my screen shots, tell me how to submit them.
Ollie
[email protected]
Maybe you are looking for
-
App store wont let me change my payment information
I recently lost my old debit card and now whenever I try to download any app (both free and $ ones) the app store wont let me because its asking for my old security code from my old debit card. I have tried changing my payment informaiton both from m
-
In "New Tab" I see a ScreenShot of websites , but I cant see screen shot for my own site , why ?
in My new tab , I see screenshots of my most visited Sites/Pages , but I see an empty box for my own website " http://www.oonternet.com " why ?
-
How to get the decision key in abap program
Hi guys. I have a user decision workflow that have two options: Accept or Reject. This options has some type of id, right? Like '0001', '0002', right? How i get this ids decisions through a abap program. I need to know this because i have to pass thi
-
Hello all! Does anybody know how to solve the following problem. We are new to iMac, so maybe it's very easy to do but we just do know know how and are pushing the wrong buttons Anyway. We have a pdf-form filled out. We want to open it, modify it and
-
Does anyone own a PhotoVu digital photo frame?
Sorry if this is not the appropriate discussion group for this topic, but I would really like to get in contact with someone who owns and uses a PhotoVu digital photo frame. I'd like to know how Mac friendly it is, as well as some how-to's in regard