Items not shown.

Hi all,
I developed an application in a user xxx.
Later that user get corrupted and so i created another user and accessing the application created on xxx.
My application template will be like this.,
LOGO                      HEADING                       LOGOUTLINK
TAB1      TAB2          TAB3
        I logged in as portal user and accessed my application,
Everything is working fine except when i clicked TAB2 the LOGO,HEADING,LOGOUTLINK is not visible.
For TAB1 & TAB3 it's visible.
I logged in as new user.,
Working fine but..for all 3tabs LOGO,HEADING,LOGOUTLINK is not visible..
I can see all them in edit mode...and i think access settings is looking to be right..
Please suggest me a solution for this...
Regards,
Paappu.

glad that it worked out for you..
- another way to do this is to make a navigation page. this may contain your organization's logo, heading and some useful links.
then you create fresh pages containing at least two regions. the top region may contain the navigation page portlet as defined above, and the lower region/s may contain other portlets and content as you like. you might also use the multi-tab scheme in these regions.
- there are several other methods too. you can create a portal page template and then incorporate it in your pages.
hope that helps!
AMN

Similar Messages

How can I display the 11000+ "items not shown?"

I have Elements 7 and running Windows 7 64bit. "Show all" only shows a couple of thousand photos and 11000+ "items not shown." I have never stacked or hidden any photos. I've tried everything. The "show hidden" gives me 0 photos. When I ask to show a tag of some of the missing photos, I again get 0. The photos are not shown in any of the views. When I try to reimport the photos, it says they are already there. I need help desperately. I've put too much work into this organizer to start from scratch.

Thanks for the reply and the terrific FAQ source. I followed the directions suggested, but things actually got worse. When I tried display all, I got 0 photos - nada - zip. I kept messing around and finally success. I tried so many combinations of things that I'm not sure which actually solved the problem, but I believe it was reconnect all. I had tried this a couple of times before without success, but this time I deleted from the catalog all items elements couldn't find, even though I knew where they were. Lo and behold all 13000 photos appeared. BTW many of those are duplicates.

At bottom of screen '36 items not shown" comes and goes??

Thanks is advance for your help.
At the bottom of the Organizer screens it always says "972 items dated etc". But then depending on something I do, possibly with tags, it sometimes shows "36 items not shown" for a total of 1008. Note the View does not show any hidden files. One thing I noticed is when I put just one photo in an album and click on the album it will say "1 item found 1007 items not found for a total of 1008.
What concerns me most is that I have 36 photos floating around somewhere that I can't see.

Thanks Brett; However, the View hidden files and edit visibility seem to be the exact same settings? Are you referring to anything else when you mention the "hidden" attribute are you referring to anything else. The only choices oh both are to: Show all files, show hidden files and hide hidden files. None of these choices including show all files seem to show all the files. Any other suggestions would be helpful. Thanks much

New items not shown

Portal 3.0.8 - Solaris.
I'm adding item to my content area and everything looks good until the item is submitted. It is then not shown on my CA page.
If I create a new CA page the items will appear. But then the same thing happens all over again when adding new items.
Anyone have a clue ?

I was just over to my client and found some things out.
No, I did not clear my browser cache but set it to check the page on every visit. Items still invisible.
The items are invisible in both view and edit mode.
This client originally created a content area with the NLS params set for the wrong language (default which didn't handle swedish chars). They then created a new content area using the correct NLS params. All CA pages created for this new CA will render items invisible. Creating new CA pages will not change anything.
If setting the CA to use the CA page originally created for the first (default NLS) CA all items will be visible.
Are we homing in on the problem here ?
And yes, all this is done using the PORTAL30 user.

SAP Inbox items not shown in UWL

We are working on ESS , we have items in SAP Inbox and not shown in UWL for a employee.
We are not able to login with the actual user. Is there any possibility to see UWL items of the item without his login?
we have UWL connecters enabled for R/3 but still have problem for this user.

Hi Kiran,
If this is specific to one user or have you found same issue with others. To receive any workflow from backend system system need to be registered to UWL.
Have a look at following threads for pointers
/message/6018381#6018381 [original link is broken]
/message/5093279#5093279 [original link is broken]
/message/5093308#5093308 [original link is broken]
Cheers,

Line items not shown in GLs

Hi All,
I have a problem with line item display. When I am running FS10N for some of GLs, they are showing values in the report. But when I drilldown for line items, it is not the value that is appearing same as a total as the overall balance.
It is happenning over the years. In the previous years I have such problem for those GL accounts. I have run the program for line item display, but the output is nothing changed.
Do anyone have idea to solve this issue.
Regards,
AJ

Hi,
Do the following things ...
1. Run F.16 (Carryforward GL balances) from the previous years to current year .. say for example 2006 to 2007, then 2007 to 2008. Then check the balances once again.
Still if you issue is not resolved, then let me know ur R/3 version and support pack level, this information is required to provide further help.
all the best
Prasad

Items not shown in Periodic Cost Update form

Hi,
I'm working with Periodic Average Cost, for a Colombia project. Instance is still in 11.5.10.2.
The issue I have is that when I try to select an item to update periodic cost, the item is not retrieve from LOV. In the form the corresponding LE / Cost Group / Cost Type. Cost Group is associated to the Item Master Org.
After checking, the LOV for items is not showing all my IMO items nor my IO items. It's showing the items for another IO (UK) which happens to be the IO #1 created after IMO
The OU has its own IO under Standard Cost and the IO depends from IMO. The responsibility has profiles for correct SOB and OU.
Does anyone know if there is any profile or setup used byt this form to deafult items' org? As it;s so far it seems we are missing a setup, but there is no reference in Metalink on similar issues
Thanks in advance,
Gerry

Good day uzma
abidi
It has been long time since I used Webforms but it look to me like you are using the default options and if there is no data that return in the query then you will not see the PagerTemplate.
1. execute the SP from the SSMS.
2. make sure that you pass the correct @status while executing the SP from the ASPX.
3. check the SQL Server profiler, what query the SQL Server got.
4. Check if DataTable (dt) has data after filling it. else you do not get the "DataBind" part, and the PagerTemplate will not display.
* The basic code look ok in fast review. I might missed something. You should monitor it and get the line that make the issue.
Ronen Ariely
[Personal Site] [Blog] [Facebook]

Item not shown for clearing

Hi everyone,
I have a question for you concerning strange behavior of the clearing for vendor accounts. This is what it is about: I have a vendor let's say 12345. On this vendor's account I have two postings. One is posted with doc type KR (Vendor Invoice) and posting key 31 and the other one is doc type SA (G/L posting) and posting key 21. Selecting the accounts open items in FLB1N TC gives me both open items. However, going to F-44 to clear account 12345 without any selection gives me only the debit posting on the account.
Both items are of the same month (only some days difference in posting date, etc.) The amount is exactly the same in Doc. Currency and Local Currency.
Has anybody got any hints for me how to fix this and clear the account?
Thanks a lot in advance for your help!
Best regards
Martin

Hi Tony,
thanks for your reply. I have checked that. The items have no clearing date. I have viewed the account selecting open items at key date today. This gives me both line items in the FBL1N view. The line items definitely do not have any clearing information set. In F-44 I still see the debit posting only.
Regards
Martin

Recently created items not shown in finder.

In an effort to replace the invaluable (IMO) recent item canned searches that were on the older Mac OSX finder sidebars, I've changed the settings of the "All My Files" folder to display by "last modified". Only problem is that it doesn't want to show InDesign files or pdfs. The pdfs will show up about 20 minutes after creation, but that's not very helpful if I've just created something I need to email to a client immediately. Granted, I can navigate through the finder windows to the file and drag it into an email, but it's a lot easier just to open the "Today" or "All My Files" folder and see recently created files right there. Is anyone else having this issue?

You don't say how long ago you migrated. If it was very, very recently it may still be indexing. If not you may try reindexing as directed in Spotlight: How to re-index folders or volumes

URL item not shown

I added an URL item in a folder, but when wieving the folder portal returns the following error:
Error: Call to utl_http failed (WWS-32136)
ORA-1: User-Defined Exception (WWC-36000)
Using: IAS102, Portal 3.0.6.5 on Solaris.
Thanx & Bye all
Fab
null

I solved this problem.
There is a table called wwv_things (portal30) where u can modify the column 'inplace' to '0' where the value is '1', then all works.

My user defined menu items not shown up in Main Menu

Hi,
I have some my own menu items need to add into Main Menu list, it works fine but only issue is the screen flash lot. Since all the menu items are in the form called "Main Menu" form then I tried to use oForm.Freeze(true) and oForm.Freeze(false) before and after adding menu items. Now the weird thing is though the screen doesn't flash but i can't see the new added menu items in the Main Menu form. But I can see them under the system menu Modules menu. Any idea?
Thanks!
Lan

Hi All,
After check the SDK help, I found the reason. I need to call oForm.Update() after. Now it works well.
Lan

Tasks and recent/frequent visited items not shown on taskbar icon

See also http://support.mozilla.org/nl/questions/943198#answer-385462.
It doesn't work!

Start Firefox in Safe Mode to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
<b> To Enable SafeMode </b>
*You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
*''Once you get the pop-up, just select "'Start in Safe Mode"''
If it works in Safe Mode and in normal mode with all extensions (Tools > Add-ons > Extensions) disabled then try to find which extension is causing it by enabling one extension at a time until the problem reappears.
Close and restart Firefox after each change via "Firefox > Exit" (Windows: Firefox/File > Exit; Mac: "Firefox > Quit Firefox"; Linux: "Firefox/File > Quit")
* https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Text in PO(text tab in header & item) is not shown in the Print Preview

Hi Guys,
            I face a problem in ME23N.Text maintained in Purchase Orders (text tab in header & item) is not shown in the Print Preview.
            Can you guys help.Do I need to write a subroutine pool for this.
            <<text removed by moderator>>
Regards,
Rajiv
Edited by: Matt on Nov 12, 2008 1:20 PM

Hi ,
Use bapi bapi_po_getdetail .
CALL FUNCTION 'BAPI_PO_GETDETAIL'
    EXPORTING
      purchaseorder   = is_ekko-ebeln
      item_texts      = c_x
      header_texts    = c_x
    TABLES
      po_header_texts = it_header_text
      po_item_texts   = it_item_text.
Regards
Neetesh

Approved and published items are not shown in the catalog search

Hello all,
We are implementing SRM 4.0 SSP scenario .
To support shopping of EBP we are also implementing CCM 2.0 as an add on.
Please note CCM and EBP are on same client and CAT & CSE are also on the same client.
No XI is involved. The catalog scheme was uploaded as CSV 2.0. The items for the catalog was created manually in CAT.
Although the item has the status "approved" and the procurement catalog which is also the master catalog was published successfully the item is not shown after searching by CSE in EBP. Also the categories of the scheme are not shown in the catalog search.
Do i have to approve the categories too and if yes can you explain me how to do this?
I think you see that I'm a newbie at srm and ccm and this problem is probably no real problem but I have not found any similar topics in the forum. So please can you help.
Thanks a lot for your help.
Best regards,
Bernd

Bernd: the reason I asked about views is that you don't have any error messages. This might indicate that (a) you have no items in the view, or (b) there's something wrong with view-role-user assignment.
To check for (a), please go to the published procurement catalog, and go to Views tab. Check that your View is Active. Click on your View ID link to display view details. You should see a list of characteristics assigned to your view in Assign Characteristics sub-tab (the list should not be blank!). Go to Assign Items sub-tab. Navigate in your schema to find items that are supposed to be assigned to your view. You should see "Yes" in the "Assigned" column for those products. If you don't, then you simply don't have any items in your view.
Another thing I'd like you to check: when the user calls your procurement catalog for search, do you see the name of the catalog displayed just below the drop-down "Select Categories Hierarchically"?
Cheers,
Serguei

Error-Message "Item not defined on current page" after Page submit - AJAX

Hello,
a lot of subpages (regions) are loaded over htmldb_get and displayed on a master page.
The parts loaded over AJAX are reports. The report regions of these reports contain a hidden and protected field, which hold the page number (&APP_PAGE_ID.)
This was necessary because I had to overwrite the standard pagination function $a_report on the master page. Otherwise the standard pagination function uses always the page number of the master page and not the page number of the loaded subpages. The overwritten function $a_report is placed in the master page header and searchs for the hidden + proteced field, containing the page number of the loaded subpage.
This works already fine.
But after submitting the master page with before loaded subpages over htmldb_get, I get following error message:
Error Item ID (15348310159873659) is not an item defined on the current page .
Setting the hidden + protected field on the subpage to never display, the error message disappear, but the pagination function doesn´t work any more.
Where is the mistake I made?
Greetings
Michael

Hello Ben,
yesterday evening I read in short your answer, but today I can´t see your answer. Have you edited it again?
My pagination function works fine and I would maintain it if possible.
But now a new feature is requiered, which require a submit on the master page. The submit on the master page is not possible due to the hidden field on the loaded subpage, containing the page number for the pagination function.
Using a normal text field (not saving state) works as long as the text field is visible (condiational view != never). But this information shouldn´t be visible to the user.
I thought, perhaps a cleanworkaround exists.
As dirty workaround I could place the information about the actual page number in the report themself (static invisible column). But as soon as the column is invisible (not shown), I have no access on this value
With a normal hidden html-input-element (not a APEX-Item) in the report regions header of the subpage, holding the page number, I get a http 400 error on page submit.
An I-Frame is not really a solution, because the master page contains several subpages, which should only be loaded and displayed on demand and not immediatly on page load.
Greetings
Michael
Edited by: user6044915 on 31.03.2009 00:27

Items not shown.

Similar Messages

Maybe you are looking for