Items on my side bar do not go Poof when dragged off? Help!

Aloha:
If I pull an item off my side bar it just jumps right back. Mydock items go poof with out problems, but not the side bar items.
Dan
Hawaii.

Wow! Right on! Why didn't I think of that!!
Thank you very much
Dan
I thought I hit the corect answer button, but mark that as a correct answer for sure!

Similar Messages

Photo stream added to side bar but not updating

I've added Photo Stream to the Finder Side Bar of OSX Mavericks through the Smart Folder Saved Search option.
However, the photo stream in the Finder Side Bar is not updating with new pictures taken from my iPhone.
Would anyone have a solution possibly to allow the photo stream to update and be shown in the Finder?

Hmmm... not sure about PC but I did have this same problem while syncing to my MAC... the cause was that my contacts sync was conflicting with other sync data... Once I changed settings for Mobile Me with contacts and address book it was resolved...
For PC... my only guess would be that a program that is told to sync contacts doesn't allow or is conflicting with the assigned photo you've set on iPhone...

Mac OS 10.9.2 Reader 11.0.7 does not initialize, cannot fill in fillable forms and side scroll bars does not operate. Can you please help?

Mac OS 10.9.2 Reader 11.0.7 does not initialize, cannot fill in fillable forms and side scroll bars does not operate. Can you please help?

Perhaps you missed that you started a discussion at I have OS 10.9.2 and have downloaded latest version of Reader 11. I can no longer fill in form or scroll using the side bar. and you did not respond to the last post there.

How do you make it not so sensitivity. when turned off set down it comes back on or when working out shirt brushes ipod and it changes music

how do you make it not so sensitivity. when turned off set down it comes back on or when working out shirt brushes ipod and it changes music

You didn't say which model of iPod Nano that you have, but generally there should be a lock setting, that can be turned on or off, to prevent accidental changes in settings. And, there is also a setting to turn on or off a feature called, "Shake to Shuffle." It allows you to change songs by just shaking the iPod.

Can't get rid of items from the Side bar

I placed some movies in the side bar and now I can't get rid of them. I was able to remove one movie that I placed in the side bar today from the side bar, but some other movies I can't remove. I don't remember putting these movies in the side bar. When I left click on these movies all that comes up is Sidebar Preferences.

I found the answer by browsing. I am supposed to hold the Command key down and drag the item off the sidebar. It worked. I was trying to right click the item and remove it that way which didn't work.

Detail Side-Bar Will Not Open

I just installed Leopard and everything seems quite nice--except iCal. The side-bar in which I can edit and/or type details is nowhere to be found. Among other things, that is where I used to check a box for "all day" or type a time. HELP. Incidentally, I just trashed the preference file iCal.plist as someone recommended to another poster, but that didn't do any good.

Tom,
Welcome to Apple Discussions.
Search Discussions with "Info Drawer" for your answer.
;~)

The back-and-forth bar does not come back when I reset to defaults. This problem is not solved.

I have attempted to get my back-and-forth navigation bar back as your website suggested, i.e., View/Toolbars/reset defaults, but it has not corrected the problem.

Have you tried any of these:
http://support.mozilla.com/en-US/kb/Back+and+forward+or+other+toolbar+buttons+are+missing
http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
http://support.mozilla.com/en-US/kb/How+to+customize+the+toolbar
Is your Navigation Toolbar showing?
'''Can't see the Menu Bar''' (File, Edit, View, History, Bookmarks, Tools, Help)?
Turning the Menu Bar on and off is a new feature in version 3.6.
''(~~red:Linux & OSX see~~: [[Menu bar is missing]] )''
''Windows'' Method 1. '''''Hold down''''' the key and press the following letters in this exact order: V T M then release the key
''Windows'' Method 2. Tap the F10 key, while the Menu bar is visible, choose "View > Toolbars", click "Menu Bar" so that a check mark is placed next to Menu Bar
''Windows'' Method 3. Tap and release the key. The Menu Bar will be displayed; then choose ~~red:V~~iew > ~~red:T~~oolbars and click on ~~red:M~~enu Bar so that a check mark is placed next to Menu Bar
The Menu Bar should now be displayed permanently, unless you turn it off again using View > Toolbars. Check mark = displayed, NO check mark = not displayed.
See: http://support.mozilla.com/en-US/kb/Menu+bar+is+missing
'''Navigation Toolbar, Bookmarks Toolbar and other Toolbars''' under View > Toolbars. Clicking on one of them will place a check mark (display) or remove the check mark (not displayed).
'''To display the Status Bar''', View, then click Status bar to place a check mark (display) or remove the check mark (not displayed).
'''Full Screen mode'''
http://kb.mozillazine.org/Netbooks#Full_screen
Also see:
''' [[Back and forward or other toolbar buttons are missing]]'''
'''[[Navigation Toolbar items]]'''
'''[http://support.mozilla.com/en-US/kb/How+to+customize+the+toolbar How to customize the toolbar]'''
'''Julia'''
'''''Other Issues''''': ~~red:You have installed plug-ins with known security issues. You should update them immediately.~~
'''Update Java''': your ver. 1.6.0.18; current ver. 1.6.0.20 (important security update 04-15-2010)
(Firefox 3.6 and above requires Java 1.6.0.10 or higher; see: http://support.mozilla.com/en-US/kb/Java-related+issues#Java_does_not_work_in_Firefox_3_6 )
''(Windows users: Do the manual update; very easy.)''
~~red:Check your version here~~: http://www.mozilla.com/en-US/plugincheck/
See: '''[http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates Updating Java]'''
Do the update with Firefox closed.
'''You''' ~~red:'''MAY'''~~ '''need to Update Adobe Reader for Firefox (aka Adobe PDF Plug-In For Firefox)''': your ver. N/A; current ver. 9.3.3 (important security update release 06-29-2010; see: http://www.adobe.com/support/security/bulletins/apsb10-15.html)
~~red:Check your version here~~: http://www.mozilla.com/en-US/plugincheck/
See: http://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox#Installing_and_updating_Adobe_Reader
''You may be able to update from the Adobe Reader installed on your system'' instead of going to the Adobe site and downloading. Open the Adobe Reader installed on your system (''in Windows, Start > Program Files, find and click Adobe Reader to open''), click Help, click Check for Updates.
''If you go to the Adobe site to download the current Adobe Reader:''
-'''use Firefox to download''' and '''SAVE to your hard drive''' (save to Desktop for easy access)
~~red:-See the images at the bottom left of this post to see the steps to take on the Adobe site~~
-exit Firefox (File > Exit)
-In Windows: check to see that Firefox is completely closed (''Ctrl+Alt+Del, choose Task Manager, click Processes tab, if "firefox.exe" is on the list, right-click "firefox.exe" and choose End process, close the Task Manager window'')
-double-click on the Adobe Reader installer you just downloaded to install/update Adobe Reader
*'''NOTE: On Vista and Windows 7''' you may need to run the plugin installer as Administrator by starting the installer via the right-click context menu if you do not get an UAC prompt to ask for permission to continue (i.e nothing seems to happen). See this: http://vistasupport.mvps.org/run_as_administrator.htm
*'''NOTE for IE:''' Firefox and most other browsers use a Plugin. IE uses an ActiveX version. To install/update the IE ActiveX version, same instructions as above, except use IE to download the ActiveX installer. See: [[ActiveX]]
*Also see: http://kb.mozillazine.org/Adobe_Reader ~~red:'''''AND'''''~~ [[How do I edit options to add Adobe to the list of allowed sites]]

All I still get is a blank other than the side bars with stuff in them when I go to Itunes store. What's with that? is anyone else having this issue?

All I still get is blank other than the side bars with information like previous purchases and all. But I can't buy or preview anything. I've done the winsock reset and all but that hasn't helped. I checked my firewall and that hasn't done anything either and it's enabled so why the issue?

I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

My Newly bought Blackberry Classic left side speaker is not working.... Help needed...!!!!!

Dear All,
Please kindly help me on this, I am from Pakistan and I got my Blackberry Classic delieved to me from USA my cousin bought it from online blackberry store and brought it by hand. Just now i have noticed that my blackberry classic left side speaker is not working only ringing sound music sound and loudspeaker sounds are coming from the right side of the speaker.
Has anyone faced this problem with his new classic and what should i do?
Please help or guide me
Solved!
Go to Solution.

Knowing this that classic comes up with only one speaker did broke my heart But to be honest the sound is excellent even at high volume the sound does not distort. its a genuien stereo speaker

Menue bar does not drop sometimes when in Safari Mountain Lion

When in Safari on Mountain I have had a few occassions where the menue bar will not drop down to close Safari

I have this problem too!

Junk Mail icon turns to "NOT junk mail" when dragged to toolbar

Okay, maybe I'm missing something here. I get a piece of mail that Mail thinks is junk. I'm supposed to be able to select the message, and click on the "mark as junk" icon, or go to the menu and do Mark Message as Junk. Well, neither of those options exist. Within the menu, I can only Mark Message as Not Junk. When I try to drag the Junk icon from the toolbar options to the toolbar, it turns into a Not Junk icon on the way. Wierd.

Greetings,
This sounds like Mail already thinks that the message is Junk. The switches are automatic, and will swap between Junk/Not Junk depending on which the message is.

SSRS 2008 Work order Report , when added item descriotion , somehow costgroup id is not working , donot know why, ( need help)

SSRS 2008 Production orders created report, when I added item description some how cost group id is not working ,
my costgroup id did not break into labor , only Mat Cost showed in the total,
my query is as below, did I link the wrong field, I want to show Labor total also
can some one suggest what I did wrong .
any advise will be great
SELECT PRODTABLE.PRODID, PRODCALCTRANS.COSTGROUPID, PRODTABLE.QTYCALC, PRODTABLE.PRODSTATUS, PRODCALCTRANS.COSTAMOUNT,
 PRODCALCTRANS.COSTMARKUP, PRODCALCTRANS.REALCOSTAMOUNT, PRODCALCTRANS.CALCTYPE, PRODTABLE.DATAAREAID, PRODCALCTRANS.KEY3,
 PRODCALCTRANS.CONSUMPVARIABLE, PRODCALCTRANS.REALCONSUMP, PRODTABLE.ITEMID, PRODTABLE.SCHEDDATE, PRODTABLE.FINISHEDDATE,
 PRODCALCTRANS.KEY1, PRODCALCTRANS.TRANSDATE, PRODCALCTRANS.QTY, PRODCALCTRANS.KEY2, PRODCALCTRANS.COLLECTREFLEVEL,
 PRODCALCTRANS.LINENUM, INVENTTABLE.ITEMNAME, INVENTTABLE.ITEMID AS Expr1, PRODTABLE.INVENTTRANSID
FROM PRODTABLE INNER JOIN
 PRODCALCTRANS ON PRODTABLE.PRODID = PRODCALCTRANS.PRODID AND PRODTABLE.DATAAREAID = PRODCALCTRANS.DATAAREAID INNER
JOIN
 INVENTTABLE ON PRODCALCTRANS.DATAAREAID = INVENTTABLE.DATAAREAID AND PRODCALCTRANS.KEY1 = INVENTTABLE.ITEMID
WHERE (PRODTABLE.PRODSTATUS = 7) AND (PRODTABLE.DATAAREAID = N'AR1') AND (PRODTABLE.ITEMID = @itemid) AND
 (PRODTABLE.FINISHEDDATE >= @Paramfromdate) AND (PRODTABLE.FINISHEDDATE <= @Paramtodate) AND (PRODCALCTRANS.COLLECTREFLEVEL
= 1) AND
 (PRODCALCTRANS.CALCTYPE >= 0)

Hi Bitia,
As per my understanding, after you add Item field to the report, it does not calculate total of matl group, right? If that is the case, please refer to the following steps to troubleshoot the problem:
Modify the dataset used to retrieve data, delete the fields will not be used in the report.
Run the query in SQL Server Management Studio (SSMS) to make sure that there is data for matl cost group.
Make sure that row group and totals are correctly added.
In addition, do you want to add Finished date to page header? If that is the case, we can use ReportItem to achieve the goal. Please refer to the following steps:
In design surface, right-click the report and click Insert, then click Page Header.
Drag Text Box from Toolbox to page header.
Right-click inside of Text Box, then click Expression.
In the expression text box, type the code like below:
=ReportItems!FinishedDate.Value
If the problem remain unresolved, please provide the screenshot of the report in design view, the following screenshot is for your reference:
Reference:
ReportItems Collection References
Adding Grouping and Totals
Thanks,
Wendy Fu

Date Axis Line/bar Chart not working properly when rendering through SDK

Hi all,
When i render a existing Crystal report 2011 through java SDK code(Eclipse) bar chart is working fine, But the Date Axis line chart is not displaying properly. the properties are getting changed.. Any clue how to handle this? Do we have particular jar for Chart?
Thanks in Advance!
Regards,
Mirthu

Hi Mirthu
I moved your post to the SAP Crystal Reports, version for Eclipse SCN Space. Unfortunately, all I know about Java is that it's in the cup in front of me . But I will get someone to have a look that should be able to help you ASAP.
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada

Main nav bar does not appear sometimes when opening a PDF

Hi. I'm using a PC running Windows 7, and Acrobat 10 and 11. I am having a strange problem where Acrobat will open one PDF normally and then a second one will open with no navigation toolbar (menu bar?) above the "Create PDF" bar that has the customizable tool icons...which renders the document useless to me as I can't drag the window around my desktop or "Save As". This also happens intermittently when re-opening the very same file. I have tried deleting the Preferences file (though I only have "WebCaptr11.prefs" in there...is that normal?), hitting F9, or F8, or Ctrl+Shift+M. Nuthin'. Right-clicking on the top of the window doesn't seem to offer any solutions, either. Any help much appreciated!

I noticed the movie on this page
http://www.niloufartalebi.com/clip.html
is displayed as 894x503 (plus 16px for the controller) while the original size is 640x360.
To make your PC visitors happy read this:
[SOLUTION : Movie NOT playing on Windows PC|http://discussions.apple.com/thread.jspa?messageID=10370447]
The problem was solved with QT QT 7.6.5 update. I mention it in case you get complaints.

How do you get the Find bar to not automatically close when a page is reloaded or when moving to another tab?

Not sure if this is a bug or a feature. Is there any way to get it to work like previous versions? I spend way too much time re-enabling the Find bar over and over.

You don't.
Clicking on the player window will hide the controllers but clicking the arrow keys will make it appear again.
Use QuickTime Player 7.6.6 instead.

Items on my side bar do not go Poof when dragged off? Help!

Similar Messages

Maybe you are looking for