ITMS audiobook isn't listed under audiobooks

I purchased episode 1 of Journey into Space Operation Luna from the iTunes Store. In iTunes it shows up under audiobooks. I then transfered the audiobook to my ipod. When viewing my iPod contents in iTunes, the book is listed under the audiobooks section, but when I disconect my iPod and navigate to the audiobooks section, it's empty. The only way to listen to the audio book is to go go through music and artist.
Also, something I found strange is that the file extension was m4p not m4b. I've already tried changing the extension to m4b, but it didn't work, and I've now changed it back to m4p.
I find it very strange that iTunes recognizes it as an audiobook, and even categorizes it as such when displaying my iPods content, but it doesn't do so on the iPod iteself.

YES!! I'm having the same issue. Anyone out there with some idea to solve this.
Thanks

Similar Messages

A movie isn't listed under my purchases. How can I find it to install on iPad?

A movie isn't listed under my purchases or in my library, but it is on my laptop. How can I find it to install on my iPad?

that's not compatibile.
from Adobe - Adobe Photoshop Lightroom 2 : System requirements
Mac OS x
PowerPC® G4 or G5 or Intel based processor
Mac OS X v10.4, 10.5 or 10.6
1GB of RAM
1GB of available hard-disk space
1,024x768 display
CD-ROM drive

Serial number isn't listed under Devices

I recently had 3 ipods stolen. When I to to Preferences / Devices to locate the serial numbers, two of them aren't listed (a new classic and a 5th gen nano). They are both synced with this account! Where can I get these numbers? I need them before they hit the pawn shops.
FYI, my 2nd gen touch and my 6th gen nano ARE listed.

I don't believe you can. iTunes does not store the serial number of iPod classics. You should keep the box from the iPod.

Tracks listed under Audiobooks don't play what is listetd

I get books from Audible. Since upgrading to iTunes 8 now my books list under Audiobooks, but when I go to play them, they don't play the track listed. For example if I have 5 tracks, 3 by Jodi Picoult, 2 by Grisham, 1 by Gary Chapman. The first listed track is the Grisham book, but when I play it Picoult actually plays. I've tried all sorts of erase, restore and playlists, nothing fixes it. I have found a workaround. By going into Genre, I can select the author and play the book I want. I do not have shuffle turned on, everything is set as normal.
I have two iPods. My wife told me about the problem and I tried to fix hers. Then I decided to look at mine and noticed it is doing it, too. So I'm pretty sure this is associated with the latest iTunes update.

I agree that this problem started with the last software update. I've downloaded at least 30+ books from Audible and didn't have this problem until the last software update. The books match the menu titles in iTunes but not on my iPod. I've tried deleting and reinstalling them with no success. Thanks for the genre workaround. It's annoying to have to go on a scavenger hunt for the book I'm listening to, especially when playing over the car stereo while driving.

I bought two audiobooks and they don't list under audiobooks in FrontRow

Hello, I bought two audiobooks and they don't list under audiobooks in FrontRow. They list in the iTunes, but when you go to itunes you just see one of them under audiobooks, but you don't see the other under audiobooks, you just see it under artists as a normal song.
Does anybody knows how to solve this? Can I touch any properties of the files to make it list under Audiobooks properly?

You might just have to "get info" on the audiobook. By right clicking on the audiobook title you then click on "get info" then entering all the appropriate information it should list it where you want it.

"Color Range" isn't even listed under "Select"?

"Color Range" isn't even listed under "Select"? I'm trying to isolate an image onto a white background, and the steps I'm following says
Select duplicated layer and go to Select > Color Range. Select white background with eye dropper and increase fuzziness to maximum amount.
BUT I don't even see that listed!

There's a clever trick to simulate it in PSE (credit to Douglas Nelson - third reply at http://www.clearps.com/photoshop-forum/index.php/m/283867/.
Select the color you want to select with eyedropper
Make a new solid color layer filled with the eyedropper color
Set the blending mode of that layer to Difference (everything in your original the color of your eyedropper color will now be black)
Use a Threshold adjustment layer to expand or contract the area to be selected.
Use magic wand (low tolerance, contiguous off) to select black areas
There's your color selection. You can hide or delete the layers created for this procedure as long as you don't deselect, and you'll still have your selection active.
To avoid accidental deselection, save the selection frequently.
Cheers,
Neale
Insanity is hereditary, you get it from your children
If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

In iTMS what is "work only" listed under price?

Iv come across phrase that I don't understand on the iTMS. It's listed in the price column, but it says "work only" instead of a currency amount. Does anyone know what this means?

If it doesn't appear in System Profiler then I would be contacting AppleCare and arranging a repair.

My FlashDrive is no longer listed under my Computer, nor does its LED light once plugged in to a USB port.

Hi,
The FlashDrive was listed under my Computer once plugged in to a USB port of either a computer of mine.
It was working well yesterday with all my Computers, HP laptop with a USB 3.0, 2.0.(Windows 7 64Bit), and with my Desktop Computer with P 4(Two operating systems: Windows XP SP3 32Bit, and Windows XP SP2 32Bit ) with a USB 2.0, and with my P3 with a USB 1.0(Windows
XP SP132Bit) . However, today, it wasn't detected at all when I tried plugging it in to a USB 2.0 port located on the in front of my Desktop Computer P 4 in both Windows XP SP3 32Bit, and Windows XP SP2 32Bit in return. Once FlashDrive got
plugged to that USB 2.0, I have noticed that notification 'a new hardware was unable to be detected well'. As a result, it was not shown in the Computer place. Thus, I tried plugging it in to the USB2.0 located on the back of the computer, on which was
working well. However, this time was not detected at all. The FlashDrive was not detected at all. If it was detected, then it would be at least unallocated. However, even its LED didn't light at all once it got plugged in to a USB, although it was lighting.
I think there was virus corrupted it.
I don't care about that drive if it was corrupted or not as much as I care about the data inside it. Thus, Could you please at least let me know how to recover the data inside it?
My FlashDrive is ADATA 2GB, it is about 5years old
Can I take apart it, and fix anything inside? I don't see any screws to be unscrewed?
I really contacted the ADATA, however, they said that the USB Flash Drive might be defective. However, they didn't suggest any solution to fix it.
Also, they suggested 'If you couldn't recovery it by software,please contact with your local store which can provide data recovery service.'
I would be saying that hte USB Flash Drive is no longer detected all once it plugged in to a USB. I.E. it seems as though it is not plugged in to a USB, although it is.
To only checked that the USBs ports are OK, I have plugged other USB Flash Drivers, and they worked well.
Thus, how to recovery data on a USB Flash Drive is not shown at all(i.e. as if it were not plugged to a USB.
That USB FlashDrive was detected and working well on my HP laptop with Windows 7(64Bit), and Desktop Computer P 3 with Windows XP SP1(32Bit)before plugging it in to P 4 with Windows XP SP2, and SP3.
It was also detected and working well while plugging into a USB 2.0 located on the back side of the P 4 Desktop Computer.
However, once it was plugged in to a USB 2.0 located on the front side of the P4 Desktop Computer . Then FlashDrive was not detected at all, and then became no longer detected when plugging in to the any USB on all Computers.
I don't know if the plugging it to that USB 2.0 located on the front side of the P 4 Computer, or there are some viruses on the P 4 made the USB Drive be infected and then, it became defective
How could I even recovery the data on the USB FlashDrive as long as there is no space(disk) shown at all once plugged in to the Computer.
Note, Those drive letters are for parition on the local hard drive, and on the external hard disk drive.
I think there is no way to recovery the data. As some people said drive is most likely dead, and will need to be replaced.' But I don't know why some people have suggested to recovery data on the Flash drive as long as they know
that drive is dead.
A man should convert his anger and sadness into strength to continue living in this life.

Hey everyone -
Thanks for your suggestions.
David.Austin - yes, my power LED does not fluctuate, so I know the computer isn't sleeping, the display is just 'off'. I do have all my disks set to go to sleep. This is a recent problem - everything used to work just fine.
joejoe - I haven't yet tried zapping the PRAM (or NVRAM), but I give that a shot and reset the SMC (SMU) again. If that doesn't work I'm going to have to do a... re-install.
I'll report back with my results. Glad to hear I'm not the only one with this problem.
Agreed - there is something wrong with one of those two updates.
Jonathan

G470 Bluetooth not listed under Device Manager and not working

Hi,
Can someone teach me how to solve my G470 problem?
Its Bluetooth is not listed under Device Manager and I can't find it anywhere.
Before that, it isn't working at all.
Thanks
Solved!
Go to Solution.

hi athirah11,
Welcome to the Lenovo Forums.
Can you try the following:
1. Press the Windows key‌ +R, type devmgmt.msc and press Enter. On the Device Manager, click View > Show hidden devices and check if the Bluetooth device is being listed.
- Link to picture
- Link to picture
2. If the bluetooth device shows up under the Device Manager, do the following:
a. Under Control Panel > Programs, uninstall the Bluetooth driver/software (reboot if necessary)
b. Run the Bluetooth Driver Installer
- this will identify the type of Bluetooth Device installed on the system (eg. Qualcom Atheros, Intel, etc.) and it will install a generic Bluetooth driver. If successful, the Bluetooth device and its components should now appear normally under the Device Manager.
If the bluetooth device still doesn't show up, can you provide the model number of your G470 (eg. 59xxxxxx) fur further checking.
Let me know how it goes.
Regards
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Podcast not listed under Podcasts- Music

I submitted my podcast about three weeks ago, and it has yet to be listed under Podcasts->Music. The podcast can be searched for, and the phobos address works fine. Is there a problem with my code?
Thanks
http://phobos.apple.com/WebObjects/MZStore.woa/wa/viewPodcast?id=268926562

Nothing you do to your code will affect whether you are listed in your category section or the browse section. Your podcast will only be seen on its category page if it is popular enough, or the iTunes staff singles it out for "New & Notable" or "Featured." There isn't much you can really do beyond the suggestions given in the "Top 6 Podcasting Questions" stickied at the top of this forum.
You will probably never be in browse either, but that is because that feature cannot seem to handle any new listings. (mmm, buggy!)

Folders not listed under proper account

First I set up Mail with an IMAP account from Fastmail.fm. The account is listed under INBOX and all the folders I have on Fastmail are properly listed under the account name.
Then, I added another IMAP account from Netscape (AOL). This account is also duly listed under the INBOX. However, all the folders in this account are listed below the default Mail folders (Draft, Sent, Trash, Junk).
How do I get the Netscape folders to be directly under its account name (and accessible with the drop-down triangle)?

Actually, it's the Fastmail account that Mail isn't handling properly. Mailboxes on the server should not appear as subfolders of the account's Inbox. You must put INBOX in Preferences > Accounts > Advanced > IMAP Path Prefix for Mail to handle this account properly.

Firefox doesn't know how to open this address, because one of the following protocols (itms-service) isn't associated with any program or is not allowed in this

Firefox doesn't know how to open this address, because one of the following protocols (itms-services) isn't associated with any program or is not allowed in this context.
You might need to install other software to open this address."
tried to fix in about:config but itms-services not foundn; also tried to fix using network.protocol-handler.external.foo but that wasn't listed either
trying to download an app related to a rewards gift card
firefox and os versions are up to date on MacBook Air

Hello!
Would you please provide the link you were trying to visit?
Also, you may want to post this question to the [https://support.mozilla.org/en-US/questions/new/desktop Firefox for Desktop Support Forum] . The Mozilla Support volunteers there may be able to better assist you.
I hope we can help you solve your problem.

Lost "Desktop" listing under "Places" when I want to save in CS5

Panic !!!
I have been saving a bunch of pictures I'm working on in CS5 to a desktop folder. Somehow on the last picture, when I clicked on "Desktop" in "Places" to access the folder and save, I must have accidentally dragged the "Desktop " out of the listing under "Places", and I heard a " poof " and the "Desktop" name at the top of the list disappeared from the list. "Documents" and all of the other choices are still there under "Places" . How do I get "Desktop" which was at the top of the list, to come back ?
I restarted the computer... nada..... and it is not in the trash. I can't save anything to the desktop or a folder there because it isn't in the list anymore in CS5.
HELP !
carolyn

Thanks... I just did that, but it doesn't appear in the "Places" on CS5. I did find a way to save in a folder
on the desktop in the pull down folder menu center just below the top "Img_6771.jpg" line. I still think there should be a way to
get it back into the "Places" window in CS5. Any other clues ?
Carolyn

Hi, my daughter is using one of our old iphones as an ipod (no phone service) It's listed under my apple id. when we downloaded the new updates, she started getting ALL of my incoming and outgoing text. How do I change this?

Hi, my daughter is using one of our old iphone's as an ipod (no phone service) It's listed under my apple id. when we downloaded the new updates, she started getting ALL of my incoming and outgoing text. How do I change this, without clearing her phone and loosing all her songs/etc....?

I did this on my phone. Her phone isn't activated, no cellular service. So, for whatever reason it won't even let me tap on SEND& RECEIVE, to uncheck anything

How to handle RunTime Faults which doesn't list under System Faults?

Hi,
I have a doubt regarding runtime faults in BPEL 1.1.In BPEL 1.1 some of the run time faults are categorised as system faults.So we can handle those run time faults
using the faultname or namespace(http://schemas.oracle.com/bpel/extension) of system fault itself.But 'SublanguageExecutionFault' is a run time fault which doesn't list under system faults.
So what namespace it belongs to?Can we use the same namespace of system fault for this kind of runtime faults ?
Are any other runtime faults existing which don't have the same namespace of sytem faults?So how can we identify and handle those run time faults?

You can create a role menu as remote enabled remote menu.
The authority checks will happen on the remote side, also against objects which don't exist in the calling system as the music is on the other side.
On the RFC client system side, you only need the parameter transaction to start the remote transaction in the remote system.
See the documentation on SYST function module ABAP4_CALL_TRANSACTION.
This is however a rather antiquated technology... it is more popular to use a SAP Portal or webdynpro applications for this sort of thing (the user does not notice the difference) or later versions of such integration such as Fiori UIs or imbedded links within the Business Client.
I don't want to lean out the window too far, but the buggy phase of these new things is approaching an end and they are usable if you are on newer releases. Then you can pool the menu and use APIs for navigation and no more irritating S_TCODE checks.
Cheers,
Julius

ITMS audiobook isn't listed under audiobooks

Similar Messages

Maybe you are looking for