ITomic e-reader gives error message when trying to register DRM

iTomic e-reader model IEBR7C AH Version:GH321 Adobe Reader Version: 9.1.28890 2010. when sending my Adobe ID via WiFi at Starbucks in order to "Register DRM," I get a certificate syntax error, what does this mean, how can I fix this so we can at least read the pre-installed e-books? Any suggestions appreciated! Thank you. P.S. The manufacturer is nowhere to be found, and Walmart wants to replace or refund, I would like to just make it work, I imagine it's my error and a replacement wont help.

There are a couple of things you talk about here. One is the Adobe
software and one is the ereader.
For the software, don't confuse Adobe Reader with Adobe Digital Editions.
They're very separate products, and Reader does not work with ebooks in
Digital Editions format. So, are you talking about Reader or Digital
Editions? Your ereader and its instructions should tell you which one.
Also, when you talk about 'registering DRM', that's not what happens.
'DRM' stands for Digital Rights Management, and it's not software. It's
the way that a publisher, distributor or library restrict the use of an
ebook - and you don't register for it because it's a set of attributes
built into ebooks themselves, not Reader or Digital Editions.
Next, the ereader that you mention is not supported by Digital Editions, so
even if you get it registered, it's very likely that you won't be able to
interact with Digital Editions. THIS
LINK<http://blogs.adobe.com/digitalpublishing/supported-devices> will
take you to the Adobe Digital Editions webpage that lists those ereaders
and other devices that are supported. Many off-brand manufacturers promise
that their ereader will work with Adobe software, but in the real world,
they don't.
Getting to the preloaded ebooks on your ereader should not involve
registering with Adobe, but it probably does involve registering with the
manufacturer's website. You may be able to do that from the ereader
wirelessly, but you'll have to go to THEIR website, not to Adobe's. Check
the 'user's guide' that came with your ereader for directions.
Hope this helps!
===============
On Mon, May 28, 2012 at 11:05 AM, [email protected] <[email protected]

Similar Messages

Itunes gives error message when trying to backup ipone 6.

ITunes gives an error message when trying to backup IPhone 6. I followed some of the advice I have seen delete old backups and try again, but I still get an error message.

What error message?
Thanks

Read only error message when trying to save updates in Acrobat 10.6.3

Hello
Hopefully I'm missing something obvious here but when I try to edit a PDF in Acrobat 10.6.3 I receive a read only error message, I have been using 'Save As' and tweaking the name each time but this seems to be a clumsy way to go about a simple save.
I am on a network and have read a previous thread that explained Adobe can sometimes be flakey on networks for saving PDFs.
Any suggestion gratefully received.

You may be stuck with copying the files locally and editing and then copying back to the network drive. I am not good with networks, but have noticed posts about network problems over the years -- often focused on specific networks. The solution is typically to deal with the PDFs locally and then copy to the network. In creating PDFs, it seems that some of the results had to do with the TMP folder usage, but I have no clue why.
As far as AA 10.6.3, you must have a cloud version or something. The latest AA is 10.1.7.

All Youtube videos give error message when trying to play

I've had this problem for a little over a week now. All YouTube videos, whether they are embedded on another site or on YouTube itself, do not play. Instead, I get an error message that says "An error occurred. Please try again later." Videos from other sites that are not in whatever format YouTube videos are in still work (such as Hulu, Dailymotion, and others).
Another thing that doesn't work on YouTube is when I click on my username in the top right hand corner to see a drop-down list of my playlists. The drop-down menu that appears just says "Loading..." and never loads. I have tried to follow YouTube's instructions, but I have done everything they've recommended.
I have tried reinstalling/updating Adobe Flashplayer, Adobe Reader (not that it matters), turning off my McAfee firewall, and even reinstalling Firefox 6.0.2.
I should also note that on Internet Explorer I am experiencing no problems with YouTube at all, but I really don't like Internet Explorer.

Reload web page(s) and bypass the cache.
* Press and hold Shift and left-click the Reload button.
* Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
* Press "Cmd + Shift + R" (MAC)
"Remove Cookies" from sites causing problems:
* Tools > Options > Privacy > Cookies: "Show Cookies"

Firefox4 gives error message when trying to display inbox in Lotus Webmail

At work, I use Firefox4 beta 11 with the IE2 extension enabled. The company uses a single sign on portal which directs traffic to specific locations.
I log into the network (SSO) and bring up lotus webmail. The application seems to start up normally, but when it displays the inbox, an error is generated.
Message: uncaught exception: [Exception... "Component returned failure code: 0x80040111 (NS_ERROR_NOT_AVAILABLE) [nsIDOMHTMLDocument.createElementNS]" nsresult: "0x80040111 (NS_ERROR_NOT_AVAILABLE)" location: "JS frame :: http://<redacted>/iNotes/Forms8.nsf/iNotes/Proxy/?OpenDocument&Form=s_JSViewList&l=en&gz&CR&MX&TS=20100524T052710,66Z&charset=ISO-8859-1 :: CyB :: line 6" data: no]
URL: http://<redacted>/mail/<redacted>/iNotes/Mail/?OpenDocument&KIC&UNH=rn9c4863bil6u5vaodk09o9mns&F8
Call Stack:
Sorry, not yet implemented
Date: Wed Feb 09 2011 08:42:50 GMT-0500 (Eastern Standard Time)
UserAgent: Mozilla/5.0 (Windows NT 5.1; rv:2.0b11) Gecko/20100101 Firefox/4.0b11
Canonical UserName: CN=<redacted>
h_PageUnid: 52482A2D50E6CB5E852568D4007AFDFD
When I enable the lotus webmail for display using the IE2 engine, the website works fine. At the moment, this is the workaround that I use, however, I would like to see Firefox be able to handle the webmail application directly.
From what I can see in the error message, the call stack is not implemented so I have no idea exactly how the issue is being triggered. I recommend enabling the call stack - if nothing else but to assist with further troubleshooting.
I will be glad to assist you in any way that I can to resolve this problem.
Thanks,
Craig

I updated everything and I just got this message. It will open a newer one page site though so it must be something to do with the file and update.
Problem signature:
Problem Event Name:    APPCRASH
Application Name:    Muse.exe
Application Version:    2014.3.1.44
Application Timestamp:    54f60cd9
Fault Module Name:    KERNELBASE.dll
Fault Module Version:    6.3.9600.17415
Fault Module Timestamp:    54505737
Exception Code:    e06d7363
Exception Offset:    0000000000008b9c
OS Version:    6.3.9600.2.0.0.768.101
Locale ID:    1033
Additional Information 1:    be34
Additional Information 2:    be344a1e5b2a1d781f0e297c84d76424
Additional Information 3:    5f58
Additional Information 4:    5f58c6cd87258caa3d36810292b8639b
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=280262
If the online privacy statement is not available, please read our privacy statement offline:
C:\WINDOWS\system32\en-US\erofflps.txt

Hp 7520 gives error message when trying to scan to email. Says not connected to Internet......

Can anyone help. I can't scan anything! Say not connected to web, but I am!

Hi Finner6,
Welcome to the HP Support Forums. I see that you are getting a connection error when trying to use the scan to email feature of your Photosmart 7520 printer.
Please set a manual IP address and manual DNS servers for the printer. I have included a link to another post that has the steps with screen shots on how to do this. Don’t worry that the screen shots are for a Photosmart 7510, the steps are the same.
If after setting the manual IP address and DNS servers you are still getting the same error message, please call HP’s Cloud Services at 1-855-785-2777 if you live in the USA/Canada region. If you live outside the USA/Canada region please click here to find the Technical Support number for your country/region.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

TM Give Error Message When Trying to Restore HD Contents

So a few weeks back I encountered a problem with my G4 powerbook. The processor was running wide open, non-stop, draining battery life and overheating easily. I decided to try a complete hard-disk wipe and fresh install, thinking that I could restore from my TM backups. So I backed everything up and did the wipe, then chose the option to restore data from a TM backup. Everything went swimmingly, until I was about 25 minutes from completion and TM gave me an error message about a file not able to be transferred (movie file in iTunes) and it could not restore my data. Any ideas on what might be causing this? If I go back into my most current backup and delete the offending file, do you think that I might be able to get back to my usual system? Any and all help will be much appreciated, thank you!

Creedym...
I have a very similar problem with my mini-notebook model NB305.
I'm getting the same message and can't get past F2 or F12.
Bottom line; I ordered the recovery data from Toshiba on-line by model number ---not by type. They sent two DVDs. My unit doesn't have an optical drive.
First call to "John"---yes, you can copy the data to a thumb drive and use that.
Almost two hours of transferring --- the NB305 did not respond to the thumb drive.
Second call to "Paul". After some consultation on his part with someone else he told me that they don't make a thumbdrive (USB) recovery disk for my model, that's why I received two DVDs. ! I would have take it to a shop where they etc...
I haven't decided what to do next. Maybe purchase an external drive rather than take it to a repair shop where it will probably cost more than buying an inexpensive external drive.
t.

What can I do to fix an old Power Mac G4 that gives an I/O error message when trying to access Entourage?

What can I do to fix an ld Power Mac G4 that gives an I/O error message when trying to access Entourage?

You mean when you try to just start it?
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.

Error message when trying to read ebook E_AUTH_BAD_DEVICE_KEY_OR_PKCS12

has anyone had this happen, error message when trying to read ebook E_AUTH_BAD_DEVICE_KEY_OR_PKCS12

deauthorize (shift-ctrl-d) and then restart ade. you will be prompted to re-authorize.

I have received an error message when trying to install 13 new apps for Creative Cloud. It reads: "Error There was an error with this action. Try again later. 7b1f5f56-79b3-4a0d-8fd2-137b1a3e6b67" I don't know what to do.

I have received an error message when trying to install 13 new apps for Creative Cloud. It reads: "Error There was an error with this action. Try again later. 7b1f5f56-79b3-4a0d-8fd2-137b1a3e6b67" I don't know what to do.

AppTrial1 where are you seeing this error exactly? For information on how to install the Adobe Creative applications included with the Creative Cloud please see Install and update apps - https://helpx.adobe.com/creative-cloud/help/install-apps.html.

I have received this error message when trying to send a comment to a blog : ERROR: Could not read CAPTCHA cookie. Make sure you have cookies enabled and not blocking in your web browser settings. Or another plugin is conflicting. See plugin FAQ., can any

I have received this error message when trying to send a comment to a blog : ERROR: Could not read CAPTCHA cookie. Make sure you have cookies enabled and not blocking in your web browser settings. Or another plugin is conflicting. See plugin FAQ., can any...
Only found one question similar and NO ANSWER to it.

Same problem here...nothing in my settings have changed since the upgrade and I've checked my cookie settings and they allow 3rd party cookies. What's up Mozilla? I've been faithful to you for years and you let me down now?

I get an error message when trying to sign into the support community with another Apple id. On the pick a username screen I get "an account utilizing this address already exists...." despite trying a few usernames. Anyone know how I can resolve this?

I get an error message when trying to sign into the support community with another Apple id. On the <pick a username> screen I get "an account utilizing this address already exists.Only one account per email address is allowed on the Apple Support Communities" despite trying a few usernames. Anyone know how I can resolve this?

This problem has been driving me demented. The instructions that Ivan gives have partially worked for me. By following his link
"How to find out if you have multiple Apple IDs" I was able to identify that yes I did have two apple accounts using the same e mail address. One was very old that I used to use for the forum boards and one is my much more recent ID that I use for everything these days. So I changed the e mail address for the old account which is associated with these discussion boards and that's the account that I am now posting this from. However even though the two accounts now have different e mail addresses when I try to log onto the boards with my more recent main apple ID I still get all the same errors as described at the start of this thread by rodgers_j. And of course that's the one I want to use so that I only have one itunes account for everything.
So if anyone has any more hints I'd be very grateful.

My iphone 4 gsm stuck in recovery loop and I get error message when trying to recover thru itunes, error message 1602. help!!!!

I removed the battery in my att iphone 4 (gsm) osi 6.2? when i turned phone on i got pug into itunes screen. I did that and it said phone detected in recovery mode click update recover butten so i did. everything started liek t was working, i tunes showes verifing with apple but never make it past that point. itunes gives error message 1602. tried fixes, got error 22 tried fixes got error 11, tried fixesand got error message 1602. i then got advice from friend who wrks with iphones. told me get inrecovery, turn off. take out battery for min at least and put back together nad then try. i could not turn it on so plugged into wll charger and screen showed osi 6 and slide bar. slid bar and asked for my pw. put in and low and behold icon on screen telling me to plug into itunes. Did that and got error messge 1602 again and itunes neer went past verifing with apple.

Error 1600, 1601, 1602
Follow the steps listed above for Error 1604. This error may also be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.
Error 1604
This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode, put it into Recovery Mode.
Restore and wait for the error.
When prompted, click OK.
Close and reopen iTunes while the device remains connected.
The device should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.

ITunes Error Message when trying to eject IPod

My Ipod Classic (30GB) gives me an error message when trying to eject:
Any ideas other than "Restore Ipod"? I did this and it worked afterward with another ipod but I don't want to have to do this all the time! Thanks to anyone who can assist.

Hello,
You may want to take a look at the article below for some more information on iMovie for iOS, specifically the section titled "What is a theme"
iMovie for iPhone 4 & iPod touch (4th generation): Frequently asked questions (FAQ)
http://support.apple.com/kb/HT4174
Hope that helps,
Griff W.

I recently upgraded to Mac OS X. I hadn't try to access anything in iWorks 09 since the upgrade, until now. I get an error message when trying to open any of the iWorks 09 applications. What's the fix for this?

I recently upgraded to Mac OS X. I haven't tried to access anything in iWorks 09 since the upgrade, until now. I get an error message when trying to open any of the iWorks 09 applications. What's the fix for this?

Follow Sonicray's advice and when you post try to give as much info about your Mac, your OS, etc... Fill out your Profile info.

ITomic e-reader gives error message when trying to register DRM

Similar Messages

Maybe you are looking for