Itouch 2nd gen. have to renew lease after every sleep mode

Recently my wife and I are having trouble with constantly renewing the lease for internet through wifi in our home. Wife has ipad and I have itouch 2nd gen. Any one know how to fix this. Can't think of any changes except for my itouch upgrading to 4.2.1

Yes, I tried resetting the network on both devices, but was unsuccessful. I did a total reset of the modem and router and the problem remained. Finally, I enabled the RIP which allows the router to send and recieve packets from the ISP. This seemed to have fixed the problem. I have not had to renew lease, since. Thank you for your reply. That was a good start.

Similar Messages

HT1430 there is a lock icon on my Itouch 2nd gen, screen and i cant get rid of it i have restored it several times and restarted it several times also

there is a lock icon on my Itouch 2nd gen, screen and i cant get rid of it i have restored it several times and restarted it several times also

What you do mean a lock icon?
On the whole screen or just in the status bar where it shows "iPod" and Time/Battery?
If the icon's there everything's ok. The feature was removed in iOS 6, anyways, the icon should be only in the lock screen.

Itouch 2nd gen

i have a itouch 2nd gen which can't update to ios6 and theres no point for me to keep it. Is it possible to exchange to a newer gen of itouch? I dont need the newest gen but an itouch that can be update to ios6.

"Is it possible to exchange to a newer gen of itouch?"
No.
Apple will give you 10% off of a new ipod if you bring an old one for them to send off for recycling.

Itouch 2nd gen not functioning

I still have the itouch 2nd gen .
its not working properly , it doesnt let me slide to unlock it everytime and it doens sensor your finger at all .
and i cant download any app anymore

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
CAUTION
Before you restore the iPod make sure that your iTunes library has the version of apps that are presently installed on your iPod. Many apps have been update and the update apps are not compatible with the 2G iPod. I would do that by deleting the apps from your iTunes library and then transfer them to your iTunes library. See:
iTunes Store: Transferring purchases from your iOS device or iPod to a computer
In iTunes 11 use Control+B to show the Menu bar then go to iTunes>File>Devices>Transfer Purchases

Itouch 2nd gen continual crashes

My itouch 2nd gen is crashing with a lot of apps. I checked the wired RAM and it's 60%, when I use a program to free the RAM, it crashes too. I've taken off all video, quite a few apps, and this still happens.

Well, I'm afraid of all that I will lose if I restore to factory defaults. Not at all sure that I have everything backed up, or that it's possible to back everything up. This may sound odd, but I have lecture notes on Awesome Note and a ton of books on ebook reader, bn.com (both of which are programs that aren't much supported anymore).

My ipod shuffle 2nd gen suddenly stops playing music after 15-20 mins.First it flashes green light and then flashes red light rapidly. Any solution to this ?

My ipod shuffle 2nd gen suddenly stops playing music after 15-20 mins.First it flashes green light and then flashes red light rapidly. Any solution to this ?

A 2nd gen shuffle is about six year old at this point. The likely cause is a battery that is worn out, with greatly reduced capacity or inability to hold a charge. The initial green light shows a good charge. The red light means the battery is drained.
Since the shuffle still appears in iTunes, you can try doing a Restore in case the cause is related to corrupted software on the shuffle. The Restore button is on the shuffle's Settings screen in iTunes. This will erase the shuffle, re-install its software, and set it to default settings.
Also, when the light becomes red and the shuffle stops playing, try turning OFF the shuffle for at least ten seconds. Then, turn it back ON. This resets the shuffle. Does it play again? If it does, let it play until it no longer plays again. Repeat turning it OFF and ON until it no longer plays. Then, connect it to power and charge it to full. See if that makes any difference.
If that does not help, the solution is to replace the battery. If you have a repair shop do it, the cost is probably uneconomical, compared to the cost of a brand new 4th gen shuffle ($50) that has more features, and a new set of headphones, plus a one-year warranty.
If you are good at such things, this web site has repair guides
http://www.ifixit.com/Device/iPod_Shuffle

As i was using my itouch(2nd gen)there was a sudden and drastic increase in temperature on the rear portion(metal portion) and since then it is not working.Has anyone come across a similar problem?Any Suggestions?

As i was using my itouch(2nd gen)there was a sudden and drastic increase in temperature on the rear portion(metal portion) and since then it is not working.Has anyone come across a similar problem?Any Suggestions?

Sounds to me like the battery has failed.
You can take it to an Apple Store. They MAY be able to do something.. Or, you can find parts and "How-To" repair guides on the internet. eBay and Google are your friends...

F apple! why isnt At Bat 12 avalible on itouch 2nd gen

its not fair that i bought my product knowing i can get access to mlb highlights and march madness only for apple to decide im not giving them enough business and make my itouch 2nd gen that i spent 260 dollars on "not capable" of having at bat and ncaa march madness on it! *** there is no reason at bat cant function on an itouch 2nd gen as it has in the past
<Edited by Host>

That is likely beause the developer deceided to drop suport for the 2G iPod, not an Apple decision.

Itouch 2nd gen won't turn on, charge, connect to my computer or go into DFU mode.....any suggestions??

itouch 2nd gen won't turn on, charge, connect to my computer or go into DFU mode.....any suggestions??

Only to make an appointment at the Genius Bar of an Apple store.

Have to reinstall Flash after every reboot.

Windows 7 - IE9 - Flash version 11.0.1.152 - Plugins and OS up to date - ESET Smart Securty 4
I get prompted to install new version of Flash after a reboot, so it happens at least once a day.
I install Flash and it installs just fine and works until the PC boots up again.
I tried some of the following:
- Use Adobe Flash Uninstall program before installing
- Using standalone install program
- Checked ActiveX Filter and it was off...turning it on causes
   this same behavior, but the problem I have has nothing to do with the filter
Not sure when this started, but the user didn't have this problem until recently.
I am using ESET Smart Security 4. On all our systems, and his PC is the only
one that is having a problem. Need some pretty hard evidence before I bother
with uninstalling ESET just to see if that would help.
The part that is really strange...if I go to manage add-on's while it is working,
I see the Flash player there and Adobe's name there and that it is enabled.
After I reboot and go into the add-on manager, Flash is still there and still
enabled, but it now says "Unknown" instead of "Adobe" and is no longer
listed near the other Adobe programs. But then, when I reinstall it, that gets
"fixed" and now says Adobe again. So it almost seems like an IE9 problem
and possibly a corruption problem. No known problems with the PC. I suppose
that reloading the PC from scratch would fix the problem...at least I hope it would,
but I'm also not ready to do major surgery if there is an easier fix.

sorry no hablo ingless
Date: Fri, 14 Oct 2011 22:39:15 -0600
From: [email protected]
To: [email protected]
Subject: Have to reinstall Flash after every reboot.
    Re: Have to reinstall Flash after every reboot.
    created by ʇɐb ɹəuəllıʍ in Using Flash Player - View the full discussion
I also downloaded that Nirsoft tool, and on my (64-bit) system I also only see the ocx and exe registered. But everything works well on my system. So I currently have no other ideas. Hopefully someone from the Adobe team will have a look at this topic.
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/3972457#3972457
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/3972457#3972457. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Using Flash Player by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

I just got through repairing my itouch 4th gen. everything is working fine except my sleep/wake button isnt responding. what can i do?

I just got through repairing my itouch 4th gen. everything is working fine except my sleep/wake button isnt responding. what can i do?

Looking at the teardown for the iPod here:
http://www.ifixit.com/Teardown/iPod-Touch-4th-Generation-Teardown/3562/2
Maybe you damaged the ribbon cable that connects the switch to the logic board.

Gen 4 iPad will wake up from "sleep mode" on its own and stay on till fully discharged, getting fairly hot in the process

Gen 4 iPad will wake up from "sleep mode" on its own and stay on till fully discharged, getting fairly hot in the process

I think I have the same problem. The whole sequence is:
* Put MacBook Pro to sleep by closing lid.
* After some period of time that varies, I notice sleep LED is no longer pulsing.
* The case is VERY hot.
* When I open the lid, the display stays black.
* No sequence of keys or closing/opening lid wakes display.
* Only way to recover is to power cycle.
* Problem is VERY intermittant -- I do not know how to reproduce it at will. AppleCare service had it for a whole week and couldn't reproduce it, whereas for me it occurs once every 1 or 2 days.
Actions:
* AppleCare service replaced the main logic board in early June, but it didn't help.
* I did a clean erase and install, but it didn't help.
* AppleCare service had the unit for a full week in July and couldn't reproduce the problem, so they returned it and it still had the problem.
I have a Logitech Bluetooth mouse, don't know model other than M-RBB93. I'll UNset "Allow Bluetooth to wake..." and will also turn off the bluetooth mouse before closing lid. I'll post my results.
Meanwhile, please let me know if anyone determines a solution!

E550 will not come back after hibernation/sleeping mode

Thinkpad E550 will not come back after hibernation/sleeping mode. please help. I just bought this garbage laptop about 1 month ago. the big issue is the laptop will not come back after sleeping. I often run some calculation for some hours, the laptop always goes sleeping and wont come back. I had to power off the laptop and re-started it again. All of my calculation results were gone. Lenovo support is very bad, I already submitted a service ticket 2 weeks ago, but nobody contacted me. Lenovo laptops are garbage. I will not buy it anymore. Anyone can help? thanks a lot!

HI Clare,
In the Toshiba Power Management utility you should click on the 'advanced' tab and about half way down the resultant window you should see an option for the action to be taken when you close the lid of your SA30.
Make sure that this is set to 'hibernate'. Then go to the power save modes and click on the 'details' tab and then the 'Power Save Mode' tab and make sure that the 'Hibernate' option is set to 'never'.
With these settings your notebook should go into 'hibernate' when you close the lid but not at any other time.
Note that you can set the notebook to hibernate when running on battery when the bttery capacity reaches a pre-set value of your own choosing.
regards,

Itouch 2nd gen wont go past apple logo

I have a 2nd gen itouch that wont go past apple logo. I did a reset and restore as suggested by some posts but still not working. Itunes can detect the ipod but I cannot do anything with it. Please help. many thanks.

- Try placing the iPod in recovery mode and then restore. For recovery mode:
iPhone and iPod touch: Unable to update or restore
- Next try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

Replacement iPod Touch 8GB (2nd Gen) beggining to fall apart after two months!

Well my problem is plain and simple
My first iPod touch (8GB 2nd Gen) was working perfectly fine until one day it slipped from my hands and the screen shattered. I took the iPod in to Best Buy and they overlooked the serial number and looked up my plan (product replacement plan) and they took it in and sent it out. They promised me a refurbished or a new iPod touch. They said it should take only about 5 days but it took two weeks, but in all fairness it was around a busy holiday seasons so i can understand the holdup. My Apple warranty was already up when i took the first iPod in for a replacement so i just used my product replacement plan. 2 weeks later i recieved my refurbished iPod in the mail, how could i tell it was refurbished, well for one the back of the iPod was void of any scratches but there was no Apple or "iPod" branding?! They also did not include the headphones used with current and past models, they shipped headphones that were changed years ago to a new design, i tested the headphones, and they were broken. I just said oh well and when i went to plug it in with the "new" cord they included i noticed there were stains all over it and i had to disinfect them (..yuck!) it made me certainly rethink even using the headphones in the first place. One thing that seemed odd to me was that it included OS 3.0 since 2nd gen iPods only ship with OS 2.2.1 and after checking the settings i confirmed it was in fact a sencond generation iPod Touch. After about a week of use i plugged in my headphones and i could only hear through one side, i unplugged them and replugged them and the problem was resolved and i thought it was a fluke, so i just disregarded it but its been a month now and since last week no matter what headphones i use i always get sound from the left channel. I was honestly furious that after only 1 month the ipod it starting to fall apart in front of me. I inspected the iPod closely and noticed that if held a certain way the glass on the lower right coner of the iPod begins to move around. The home button has also failed to respond quite a few times. Then when one day the external speaker started to begin to become flaky and sometimes not work at all, i just said "thats it!" im currently resetting the iPod to factory settings and putting a test sound on it for them to listen to and see the problem. In fact when i received it there was already a test sound on it so i presume there was a problem with the jack previously? I am repackiging everything and am off to geek squad tommorow, if there is any other advice to offer please let me know. Ive treated the iPod like a child after the first one shattered and the device has never been dropped, the screen and the back cover are spotless (minus the small scratches on the back chrome cover just from normal use) the iPod has never been near water and i checked the iPod to see if infact water could have gotten in the iPod and the sticker was still sparkling white, i am sorry Best Buy ive been a customer for years and while do not mean to rant and complain it has only been to months and its already falling apart?! i am sorry that is just not acceptable.

I just got my ipod touch 2nd gen 8gb replacement ipod in the mail two days ago. And i fell that my screen has cracked way to easily. I had my other ipod touch before this one for a year and a half and the screen had never been cracked. But my first two days with this "replacement" ipod has cracked twice. i am willing to take the blame for the first crack as i dropped it in the street and my case didnt do its job, but lasnight i put my hand in my sweatpants pocked only to find small peices of glass. i took out my ipod and there was the problem. a large shatter on the bottom near the homebutton. Seriously 2 cracks in 2 days with my REPLACEMENT after 360+ days and no cracks with my forsure APPLE ipod touch? I doubt my ipod touch screen is even made by apple.

Itouch 2nd gen. have to renew lease after every sleep mode

Similar Messages

Maybe you are looking for