ITouch 4th generation will not switch on

My 8gb 4th generation iTouch just swithched itself off and won't turn on again! What should I do?

Oh it's ok but thank you anyway. I got it sorted. I held in the two buttons on the iPod for ten seconds and this switched it on without the need of losing any data.  It must have just frozen a little. Thanks anyway.

Similar Messages

  • Ipod touch 4th generation will not restore

         My ipod touch 4th generation will not restore. It begain with a random problem with the device. I tried to open a application but the application would blink a few times then would not open. This was so for ALL of the applications. I then powered of my device to try and reboot it. The Apple logo will apear for about 5 seconds but then the sreen will go black and the Apple logo will apear again. I tried to reboot several times and it did not work. I then connected my device to my computer but it would not appear in Itunes. The only way for the device to appear was for me to put it into DFU mode by holding down the home and power button for 10 seconds. My Itouch would have the connect to Itunes on it. It was then reconized by Itunes. Itunes message appeared telling me that i need to restore my Ipod. I tried restoring the Ipod, but after the update downloaded a error would appear while it was going through the restoration proccess.
         My Ipod is under the one year warrenty and i also had purchased an extended two year warrenty for my Ipod. I do not know what i should do.

    ok i will my friend has my ipod right now but If it doesn't still work ill get the error number tomorrow.

  • IPod shuffle 4th generation will not connect to iTunes.

    iPod shuffle 4th generation will not connect to iTunes.  Windows Vista and iTunes, all updates current.  Cables secure & connected.  Device driver will not load.  iPad will connect when tried with several other computers.  When I try to connect it will hang iTunes until I re-boot.  iPad does NOT appear in Windows Explorer either.

    Oh, so the iPad DOES work fine connected to the same computer and the same port.  I thought you said it did not in the first post, but maybe you got that working (or I misunderstood before).
    NOTE:  When things are working properly, the shuffle will not appear in Windows Explorer (except when actively syncing), unless you have Enable disk use turned on for the shuffle.  So not seeing it in Windows Explorer may not be a problem.
    Is this shuffle a new purchase... so it did not previously work for you on this computer?  If so, make sure that the shuffle end of the USB cable is fully inserted into the headphones jack.  The fit can be tighter than expected, and it may seem connected, but is not.  For a surprising number of people, this was the problem.
    In iTunes, is the sidebar (along left side of window) visible.  If it is hidden, from the iTunes menu bar, under View, select Show Sidebar.  When there are no devices connected, the heading DEVICES should not appear in the sidebar.  When you connect your iPad, DEVICES should appear, with the iPad listed below.  If you connect the shuffle, it is be added to the list under DEVICES.  To confirm, you do not see the shuffle listed there under DEVICES, when it is connected?
    When you connect the shuffle, does its light on the shuffle do anything?

  • My ipod touch 4th generation will not charge or cut on? can you please tell me whats wrong with it.. i have tried the holdin the home and lock button at the same time and still won't cut on

    hello my ipod touch 4th generation will not cut on or charge. i have tried the holding the home and lock button and still won'ty work. i don't know what to do. can you help me please

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • My ipod nano 4th generation will not turn on or charge.  It is just sitting (frozen) at a black screeen.

    My ipod nano 4th generation will not turn on or charge.  It is just sitting (frozen) at a black (blank) screen.  What do I do?

    Hello, HJA-heartgirl. 
    There are a couple things you can try to troubleshoot this issue.  Below, I have included a couple articles that will help you troubleshoot your iPod.
    How to reset iPod
    http://support.apple.com/kb/ht1320
    iPod nano (4th generation) Troubleshooting Assistant
    http://www.apple.com/support/ipod/five_rs/nano4gen/
    Regards,
    Jason H. 

  • My IPod 4th generation will not let me send a message

    My iPod 4th generation will not let me send a message. I tried sending a text and it froze. It automatically exited out of messages and back to the home page. When I tried to get back to it. It was a blank white screen! What do I do?

    iOS: Troubleshooting Messages
    Then try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up           
      - Restore to factory settings/new iOS device

  • My ipod (4th generation) will not charge.I have tryed a wall cherger and charging on different computers.Nothing! what should i do?

    help me my ipod 4th generation will not charge. i have tryed a wall ataptor an other computers.What should i do? Should i get a new ipod or should i try and get a new charger and see if that helps.It has not been changing for two weeks straight now .Help Please.

    Either your USB cable for the charger has been damaged or the part of the iPod where you insert the USB cable is damaged. This usually happens due to water damage or carelessly removing the USB plug off from the iPod. Hope this clears some doubts
    You might also wanna try and check with the Genius Bar at Apple, they usually know whats wrong.

  • My ipod touch 4th generation will not leave the apple logo sign

    my ipod touch 4th generation will not leave the apple logo sign what do i do to turn it on and work ? please help

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • HT1459 My iPod touch 4th generation will not even turn on so I can't get the serial number.

    My ipod touch 4th generation will not even turn on so i can not get the serial number. what can I do?

    If you synced with your computer then use the iTunesmethod included here:
    - iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number

  • IPod shuffle 4th generation will not turn on?!?!

    My iPod shuffle 4th generation flashes red for 3 seconds when connected to the USB charger but will not turn on, charge or connect to the computer.  This means i can not go through the basic trouble shooting reset steps.  I tried turning it off waiting 10 seconds and turning it on.  I made sure the buttons were no diabled.  I updated my iTunes and updated all software on my computer and restarted it.  I also made sure the USB port works by putting something else in- it works.  I am running out of options given on the apple website!!! WHAT DO I DO?

    Hello StefiPod,
    It sounds like your iPod is not charging, and you have already restarted your computer as well as updated your iTunes application and the issue persists. You have also verified that the USB port works for other devices.
    I recommend these troubleshooting steps from the article named:
    iPod shuffle troubleshooting and service FAQ
    http://support.apple.com/kb/ts1412
    Your iPod shuffle may need to be reset. See this article for steps to reset iPod shuffle. Resetting does not affect your music or data files.
    If a red light is blinking or continuously on, your iPod battery may not be charged. You can find information on charging iPod shuffle here. To find out how to check the battery life, see the article "Checking the charge." To get the most out of your battery, be sure to check out our battery tips and tricks article.
    If none of these steps worked, you may need to restore your iPod shuffle software. Please be aware that doing so will delete all your files on iPod shuffle.
    If the issue persists, then your iPod may need service. Follow the section toward the bottom labeled:
    Get Service
    If you've tried all the appropriate troubleshooting steps above and those found on the iPod shuffle Support page, and have determined that your iPod shuffle needs service, you can request service online.
    Thank you for using Apple Support Communities.
    Cheers,
    Sterling

  • HT1719 my ipod shuffle 4th generation will not charge or connect to the computer, I updated iTunes and I got a new charger.

    My iPod Shuffle will not charge or connect to the computer. I updated iTunes and bought a new charger. Any ideas? Thanks

    My question was, when you connect the shuffle to USB, does the light come ON?  From the way you answered, I'm not sure if you are answering that question, or saying that the light does not come ON when you move the power switch on the shuffle to the ON position.
    Also, what happens when you connect the shuffle to your computer by itself, with nothing else connected to USB?
    If you get no response (no light) from the shuffle when you connect it to USB by itself, trying both the original USB cable and a new one that is compatible with the 4th gen shuffle, try connecting something else to the USB port to confirm it is working properly.  It would be best to test the USB port with something similar, such as a USB flash drive or external drive.  If you can confirm the USB port works properly, it is likely that the cause for this problem is on the shuffle, such as a faulty headphones jack or bad logic board.
    If the shuffle is less than one year from purchase date, it is under warranty.

  • Okay my iPod touch 4th generation will not sync. I reinstalled iTunes . Can someone please tell me what to do?!?!?! Oh would there be any chance that me letting my friend use my sync cord could've messed it up???

    I need some help. I want to sync my iPod touch 4th generation and it WILL NOT sync. I reinstalled iTunes and it still won't sync. I also let my friend use my sync cord, could that have anything to do with my problem?? I really need some help. So please answer me back if you know what could be wrong.

    Could be the cable.  Have you tried:
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
    or
    iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X

  • Ipod, nano 4th generation, will not charge using my PC or my dock.  It's 5 years old and has charged using both methods since I got it.

    My ipod will not charge when connected to my dock or my computer.  I will play when connected to both.  I have tried both USB ports, checked the connections on my dock (power light is on) and it will just not charge. 

    Howdy Crickety22,
    Using the USB cord in different locations is a great way to help isolate this kind of issue. Since you have done that, the next step I would recommend is testing a different USB cable with the device.
    Check out this info from the article named Archived - iPod's battery doesn't charge found here http://support.apple.com/kb/ta44551
    Faulty cable
    If something is wrong with the FireWire or USB cable that came with iPod, it may not supply any power to charge the battery. Note: Only iPod models with a Click Wheel can get power from a high-powered USB port using the supplied cable (includes iPod mini, iPod (Click Wheel), iPod photo, iPod with color display, iPod nano, and Fifth Generation iPod).
    Make sure you are using the cable that came with iPod. Some third-party cables may not work properly with iPod.
    Make sure nothing is in or blocking your computer's FireWire or USB ports.
    Check the connections to make sure the cable is completely plugged in.
    Try another known-good FireWire or USB cable if available.
    If this resolves the issue your FireWire or USB cable needs to be replaced. You can arrange for replacement at theiPod Service Website.
    And this part as well:
    Faulty dock connector or FireWire port on iPod
    If something is wrong with iPod's FireWire or Dock Connector port, it may not supply power to iPod.
    Make sure nothing is in or blocking iPod's FireWire or Dock Connector port.
    Check the connection to make sure the FireWire or Dock Connector cable is completely plugged in.
    If this did not resolve the issue iPod needs to be repaired. You can arrange for repair at the iPod Service Website.
    Regards,
    Sterling

  • IPod 4th generation will not turn on and its brand new!

    I just got my iPod touch. It is a 4th generation. I got it for Christmas of 2012. Now it wont turn on. I had left my iPod touch on the floor, my window was open, and it was very cold. I left it fully charged and I went to sleep and woke up and it wouldnt turn on. I didnt have music playing or the wifi on so that wouldnt be the cause of it not turning on. The coldness may have something to do with my iPod not turning on. It won't show up on the laptop and I'm scared the battery isnt working anymore. I am considering the thought of bringing it to the Apple Store. I dont want to get a new one cause I have a touch screen cover on my iPod. I hope someone comes up with an answer. Please help ASAP!

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • My Ipod nano 4th generation will not charge or turn on! Please help

    I bought a refurbished Ipod nano 4th generation 2 weeks ago from a good reliable ebay seller. It arrived and was in great working order with no issues what so ever. However this evening I realised it was out of battery, so I went to charge it and nothing. No light up, no recognition of it being plugged into the PC or when I try via a plug socket. I have contacted the seller about this asking for a refund as I have not done anything or put it anywhere that it would die like this. However I thought before I try to send it back I would try here and see if anybody knows what may be wrong with it.
    Thanks

    You need a new battery. 

Maybe you are looking for

  • How to save Special Characters in oracle?

    Is there any way to enter special characters such as ºC ? i am using J2EE and Oracle 9 i. When i try to enter 2ºC after updating the datbase it is converted to 2ºC when it is displayed in HTML. All special characters are prefixed with Â. Pls suggest

  • How to list all files of an ibook in the OPF manifest?

    I have this message error when i DELIVERED my iBooks with I Tunes Producer. ERROR ITMS-9000: "A5809-7_Math_Venture_3rd_Operations.ibooks: The book asset contains file(s) not listed in the OPF manifest: A5809-7_Math_Venture_3rd_Operations.ibooks:/OPS/

  • Unable to open after effects: error code 15

    I have been searching the forums and it looks like only mac users have had this problem, I am a windows 8 pro user and every time I want to open up after effects cs6, it keeps coming up with a message simply saying: Configuration error Please uninsta

  • Flash Builder 4: "Flex 2 is not supported; use Flex 3.0.0 or higher "

    In our project we have to maintain an application developed in Flex 2, but we have licensed Flash Builder 4, which is now available for Adobe only. When we tried to configure Flash Builder 4 with Flex 2 SDK we get the following error: "Flex 2 is not

  • IPad 2 discharging when plugged (10W)?

    Since using my brand new iPad 2 over the last two weeks or so I have noticed on more than one occasion that using it while plugged into that 10W adapter (220V) will actually result in the battery percent going down. For example today while using it (