Itouch 5 standy or power off during sleep hours?

Should I leave my ipod on standy during sleep hours or turn it off?

If you want to receive notifications you have to leave it on. However, leaving wifi on uses up the battery. Your choice o

Similar Messages

HT201263 It Power off during it electricize ,Any way I can not Power on

It power off during it electricize ,Any way I can not power on

Did you try to connect in recovery mode?
iOS: Unable to update or restore
More tips here:
iOS: Not responding or does not turn on

ITouch 2nd will not power off

I tried to completely power off my iTouch (2nd generation) but it is stuck on the load screen before the power off, its just stuck there in limbo. Anything I can do?

Press and hold both Sleep and Home buttons for a few seconds until your iPod shuts down.

RV180 (wired only) problems with firmware 1.0.4.14, fails to boot correctly + LAN ports power off during boot (downgrading to 1.0.3.10 = fine again).

Hi All,
A few months ago when 1.0.4.14 was released I was quick to update to this version from 1.0.3.10 but very quickly ran into issues.
Bit of background info... I am not doing anything complex with this box, basic IP4 network over all LAN ports, no VLANs, firewall enabled and allowing 2 port access rules to a static IP address. Any static IPs are assigned manual at host level but all other devices receive DHCP IP addresses. I don’t host VPN on this RV180 but I do with another. Routing VPN has no issues. WAN is connected to another switch provided by my ISP who provides DHCP IP Address with their DNS etc. Only LAN ports 1 and 2 are connected, port 1 to my Wireless AP (AP mode passing all requests to the RV180, DHCP etc.), port 2 connects to a 8 port Smart Switch (but all 'Smart' features are currently not in use, so basic switching only). All other settings on the RV180 are on recommended defaults.
Everything is working fine on 1.0.3.10 but I have all kinds of issues after updating to 1.0.4.14. Here are the actions and experiences I had...
1) Backup my RV180 config to txt file.
2) Navigate to the firmware upgrade page and follow steps to complete the upgrade process from 1.0.3.10 to 1.0.4.14. *router does the normal process of upgrading*
3) RV180 reboots to complete but doesn’t come back up even after waiting 5-10 mins. LAN ports enable during boot up (link lights on) but after about 2mins turn off (no link lights). WAN light is on alongside the Power Light.
4) Power cycle even with rest... Same results.
5) Reset the RV180 to default settings. I can sometimes get the unit to boot up and the LAN remains active and powered up. The web UI is VERY slow compared with 1.0.3.10. Internet sometimes works and sometimes doesn't (I would expect it all work without issue on default settings).
6) I repeat this a few times, various resets, powered off waiting periods, etc. but I always have issues. I did manage to get some log file information and the Kernel appears in the Alert, Error and also the Warning logs (please see attached files).
7) I gave up at this point. No major issues like this reported on the internet from a few google searches etc. So I then reset to defaults (1.0.4.14), downgrade to 1.0.3.10 and finally reset to defaults again + restore backup config settings (with some manual changes).
The router has remained like this and seem to be working fine, but I would like any security improvements from 1.0.4.14 firmware on my device.
Anyone able to help, have the same issue or can advise me in any other ways?
I see 1.0.3.10 isn’t displayed as a firmware download on the standard support page for the RV180 now. Only 1.0.2.6 and 1.0.4.14. Do I need to downgrade again to 1.0.2.6 before upgrading to the latest version?
Regards,
~FAZ~

Hi,
I recently bought a RV180 router and immediately I encountered the same problem; practically I am not able to access the web GUI.
The PC is directly connected to the router, nothing else is connected; the TCP/IP configuration is as follows:
PC: 192.168.1.100
RV180: 192.168.1.1
GATEWAY: 192.168.1.1
SUBNET MASK: 255.255.255.0
Once the router is turned on, the power LED flashes fastly, the Ethernet LED is on but after few minutes it disappears and the PC detects a disconnection of the Ethernet cable.
The router is not pingable and, as I said, the web interface is not reachable.
I have tried to power cycle the router, to reset it (pressing the reset button for more than 3 second and for more than one minute), to access the rescue mode and download a new firmware through TFTP, but nothing worked.
Few times, after many boot and reset trials,I was able to access the web interface and in one of these occasions I updated the firmware to 1.0.4.14 but once the router is powered off the problem arises again at the next power on.
I have not tried yet to downgrade to an older firmware version.
Can you suggest any solution? thank you.

Power off during updated

During updated the ipod, the power of the adaptor is off when "Power adapter plugging into wall". Now there is nothing on the display. What can I do? Pls help.

Try to do a Reset on your iPod, redo the Restore, and make sure your AC charger is ready.

Pismo shuts off during sleep-mode

Hi
I realized that my Pismo occasionally shuts off while in sleep mode. When I press a key to wake it up the pulsating green light turns off and I need to press the on/off-key. The computer then reboots normally.
Thanks! Felix

Hi
In meantime, it is not "occasionally" but always.
1. PMU-reset with the small button on the rear did not help either.
2. I believe I cannot hear the HD after opening the lid. The flashing green light turns off. I simply press the on/off-button and the Pismo starts up as if I turned it off.
3. HDD is new, Seagate 120 GByte.
Actually a few weeks ago I obtained a Pismo with a defect power borad and swapped CPU-cards due to my bad L2-cache. Worked great!
Afterwards I realized, that the casing of the other Pismo was in much better shape (mine has a crack next to the bottom Apple-logo and a very shiny upper part). What I finally did was the following:
Stripped both down to the point where practically the logic board and metal frame was the last part in there.
Built up on the lower part of the ebay-Pismo with my power-board and practically all other parts from my own functioning Pismo and with the new HDD. Upper case and keyboard is from the ebay-Pismo, which was apparently used very little.
I guess I will take everything apart again and make sure that my own logic board runs in there. Maybe the logicboard of the eBay-Pismo was damaged together with the power boards and AHT doesn´t recognize it (System Profiler shows an error with regards to the sound system, but sound works).
Strange, if I could only tell whether this is hardware related.
Thanks for any input
Felix

Imac shuts off during sleep mode

when in sleep mode my 2010 imac 21" shuts off after a couple of hours? It starts up fine but happens evertime its in sleep mode.

You may improve some of your power issues by resetting the SMC on your iMac by using the instructions found here: http://docs.info.apple.com/article.html?artnum=303446
The only other thing I can think of, outside hardware/power supply problems, is your power is getting cut off for a brief period. You can go to System Preferences > Energy Saver > Options > you can CHECK 'restart automatically after power failure' - if this is already selected, then I would think it maybe a hardware issue... let us know
Rick
iMac G5 iSight 20" - 30G iPOD in Slimming Black - Mac OS X (10.4.7) - HP Pav 15" WS and Toshiba Sat 17" WS LP's - Canon 20D & A620

Why does my Nexus Galaxy turn off during sleep mode?

I can't put my phone is sleep mode for longer then 10 seconds and it will shut off and I can't upgrade till next year any advice?

I can understand how you feel about having issues with your phone Elisa292005, especially power cycling and features not functioning properly. I know upgrading may fix the issue but we would like to fix the problem first. The information that Ann154 provided was great. Safe mode can tell you if an application is causing the problem and that you should remove it quickly. I also would like to know if the phone id damaged? How long have you had this issue? If you are unable to upgrade, we have many other options that may work for you. First, do you have insurance? Secondly, if you don't have insurance, take a look at this option for replacing your phone http://vz.to/16vfYHl . Lastly, please check to ensure you have the most updated software. Software updates can help the phone function better. I look forward to hearing from you and please keep us posted.
KinquanaH_VZW
Follow us on Twitter @vzwsupport

IMac shuts off during sleep

I have an iMac G5 running 10.3.9. When it goes into sleep mode, a short time later the system completely shuts off. I have been out of town for a while, so I don't know exactly when this started, but my brother says it started a couple weeks ago. I would be surprised if any system-level hacks had been installed, since the rest of my family would be scared to try anything like that. As far as I know, nothing significant has been installed lately.
A bit more info:
If the computer goes to sleep based on an inactivity timer, it will sleep for a while (flashing power light) and then turn off. If I select Apple > Sleep, it immediately shuts off. I've already reset the PRAM.
Any ideas?
iMac G5 Mac OS X (10.3.9)

Hi Homer,
Welcome to Apple Discussions.
It would help us to know which G5 iMac "model" you have, how much RAM, etc. You can have this info displayed on the bottom of every post by going to 'preferences' which is located in the column on the right under your name, click on "My Settings" and filling in the information asked for.
This will help in providing you with the proper and/or correct troubleshooting solutions.
Thank You.
PS: If you do not know the model of your Mac, see Knowledge Base Article http://docs.info.apple.com/article.html?artnum=301724#301724 How to identify your iMac

Usb power off while sleep, let active speakers go in standby mode

is there a way to shut down power to the usb out while the mini sleeps, so my Kef X300a speakers will go to standby mode?
or is there an alternative way regarding the x300a speakers.

sudo pmset -a hibernate mode 25 , did the trick, usb powers down in hibernation mode, still able te awake the mini with bluetooth mice and keybord.

Why does my ipad mini power off during sync

My ipad mini shuts down during sync. Then I get a message that says the sync cannot be completed, because the ipad cannot be found...what's up?

Settings>General>Auto-Lock>Never

Fans running during sleep G4 & G5

Yes, I have searched 6 different ways to Sunday, cannot find a thread that gets close.
My issue with both my G4 & G5 powermac towers, is that sometimes during sleep, the fans run at full speed and will not wake. I have reset the the PMU? on the G4 and it's still trying to take off during sleep. Is there a common fix or repair, simple I thought.
Mike

Hi Mike, a few things that have been tied to this are...
Spotlight or Time Machine working as Sleep is invoked.
USB or Firewire devices.
Having put Disks to sleep when possible enabled.
Bad Logic Board or Sensors.

IMac turns off while sleeping

My iMac sometimes turns off during sleep mode, I did call apple care and went through utilities and the tech support said that issue should be resolved, but it happen again today. Has anyone else had the same issues? Is this also the start of some bigger issues down the line?
Thanks,
BC

HI BC,
Check System Preferences/Energy Saver. Click the Schedule button bottom right in that pane and make sure it's not set to turn off at a certain time.
According to this article, http://support.apple.com/kb/HT1237 Make sure your software is up to date.
Carolyn

Bluetooth powers off in sleep mode

My bluetooth is powering off during sleep mode on my 2.93 ghz iMac, core 2 duo. It does not happen everytime, but 2x in the last week. The only way I can get it back on is to reboot. Any suggestions as to reason, and possible fix?

Try doing a smc and pram reset.

After Sleep, and power off, Lion Crash Totaly! iMac core i5 2011

After Sleep, and power off, Lion Crash Totaly!
I`'ve buy a iMac core i5, July 15 2011, 500gb, 4gb (upgraded to 8gb Ram).
Transf my MBP with Snow at first iMac power on, after tranfer Snow, I buy the Lion, install and use until 2 weeks. After the first Sleep, turn Lion power off to change place. When power on, the Lion was Crashed the computer in some way that was impossible to recover or do anything. even go back the timemachine with Lion or Snow, trey clean PRAM, DVD Boot, nothing works.
So, I put a Ubuntu LiveCD, REMOVE COMPLETE THE GUID of iMac Disk, also clean the PRAM (cmd+opt+ P + R during boot), so, the iMac was Clean and I Install the SNOW (sure).
I just Lost the money and download time that spent to get with Lion?
How can I have a Lion DVD for when Apple fix the LOT OF PROBLEMS?
Have apple schedule for fix problems?

After Sleep, and power off, Lion Crash Totaly!
I`'ve buy a iMac core i5, July 15 2011, 500gb, 4gb (upgraded to 8gb Ram).
Transf my MBP with Snow at first iMac power on, after tranfer Snow, I buy the Lion, install and use until 2 weeks. After the first Sleep, turn Lion power off to change place. When power on, the Lion was Crashed the computer in some way that was impossible to recover or do anything. even go back the timemachine with Lion or Snow, trey clean PRAM, DVD Boot, nothing works.
So, I put a Ubuntu LiveCD, REMOVE COMPLETE THE GUID of iMac Disk, also clean the PRAM (cmd+opt+ P + R during boot), so, the iMac was Clean and I Install the SNOW (sure).
I just Lost the money and download time that spent to get with Lion?
How can I have a Lion DVD for when Apple fix the LOT OF PROBLEMS?
Have apple schedule for fix problems?

Itouch 5 standy or power off during sleep hours?

Similar Messages

Maybe you are looking for