Itouch 8g 2nd gen. OS4 not connecting to WIFI-NO WIFI

My Itouch suddenly stopped connecting to the internet. My apps wouldn't work at all. Where the Wifi bars used to display there is now only IPOD displayed. After upgrading my Itouch to OS4 it still only says "ipod" and won't recognize or allow me to connect to any networks I used to be connected to.

Try powering off and then backon the router.
Does the router work for other wifi device?
Try the troubleshooting here:
iPhone and iPod touch: Troubleshooting Wi-Fi networks and connections

Similar Messages

  • Ipod (2nd Gen) will not connect to wifi at home, tried reseting network settings, restore,still no wifi?

    Ive tried resetting the network settings and restoring my ipod and it still won't connect to the wifi at home. Has been working fine for years and I haven't touched the router settings at all. So whats the prob?

    Try powering off and then backon the router.
    Does the router work for other wifi device?
    Try the troubleshooting here:
    iPhone and iPod touch: Troubleshooting Wi-Fi networks and connections

  • Ipod touch 2nd gen will not connect to my wifi giving me incorrect password

    Friday when i went to school when i came back and i turned wifi on it asked for my password and it told me incorrect password even though i am 100% sure it is correct. I went to my dads house over the weekend and used wifi there, and when i came back it would keep telling me that i had the incorrect password. My brother also has a 2nd gen itouch with ios 4.1 and same as me and his will connect just fine. I have tried several things and none seem to work. I have not tried updating my ipod or restoring it for several reasons. Does anyone have a fix?

    Does the iOS device connect to other networks?
    Does the iOS device see the network?
    Any error messages?
    Do other devices now connect?
    Did the iOS device connect before?
    Try the following to rule out a software problem:                 
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    .- Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • IPod touch 2nd gen won't connect to WiFi

    I just bought iPod touch 16GB 2nd gen and I'm having trouble with using some WiFi networks. I can use unsecured networks, but I am unable to use ANY protected networks. Whenever I try, it asks me for the password, I enter it and then it gives me 'unable to connect' error. I try the same thing with my laptop and it works like a charm. I checked support part of apple.com website but I couldn't find any useful information. Anyone knows a solution for this? Should I contact apple?

    My 2nd Gen iPod Touch would not connect to our guest WEP network at work. I run WPA at home and it works fine. As an experiment, I switched home back to WEP (128 bit) and it connected fine. HOWEVER, this was when I configured the router to use the hex key in slot 1. I could never connect when I configured it to use slots 2, 3, or 4. Rumor has it that some folks choose the key in slots 2,3, or 4 for some misguided reason of thinking that this is more secure than using slot 1. In reality, all WEP is insecure (but maybe better than nothing). Check which slot your router is using for the key. Still the Touch should work regardless of WEP slot used. Those at work with 1st gen Touch's have no problem while those with 2nd gen simply do not work on the WEP network (despite both set of users being on the 2.2 iPod s/w version). Hope this helps and I hope Apple has a fix. Otherwise I have to go do battle with corporate IT.

  • Ipod touch 2nd gen won't connect to wifi/internet

    I have an Ipod gen 2 and I recently stopped using it for about a month. I turned it back on to find NO way to get it to connect to the wifi. I have restarted my device several times as well as my router/modem, and I have restored network settings. It says that it is connected to wifi like normal, but when i go into my apps it says there is no internet connection. I have surfed around trying to find a solution but nothing is working. Please help (and please do not tell me to go to an Apple store to get it fixed).

    Does the iPod connect to other networks?
    Do other devices now connect to the network?
    Try the following to rule out a software problem:                 
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • My ipod shuffle 2nd gen is not connecting to computer right.

    My ipod suffle second gen is flashing red 3 times and then showing clear,like its off.After the flash's the computer is not recognizeing it.what happened?

    My guess, based on your info and the fact that the shuffle is an older model, is that the shuffle's battery is worn out and not holding a charge.  When you plug it in, it functions because it is getting power from the USB connection and appears to charge.  When you disconnect it, it goes dead because battery does not hold the charge.
    Since you have already tried doing a Restore, the problem is hardware and not software.  Unless you want to do the work yourself
    http://www.ifixit.com/Guide/Installing+iPod+Shuffle+2nd+Generation+Battery+Repla cement/3656/1
    the cost for replacing the battery probably exceeds the $50 for a new 4th gen shuffle.

  • My VadoHD 8GB 2nd Gen is not dectecting my laptops

    Hi Support Team,
    I am pretty much intense because my VadoHD 8GB 2nd Gen is not connecting any of my Lapto
    ps.
    Before it used to detect easily on my MacBook Pro and downloads the videos easily. Right now after using around 3 months, its not detecting and I can not download any of my videos. I can take the video and play back on it but can not download on my machines. I have already tried connecting in Mac, Windows XP, Windows Vista and Windows 7 but not working at all.
    This is so weird. Please help. I have to download my trip videos.
    Thanks,
    Dikesh

    Dikesh,
    Customer Support do not monitor these forums, please contact them using this email form. Read the disclaimer please.

  • Ipod shuffle (2nd gen.) not recognized by my powerbook (g4)

    My new iPod shuffle (2nd gen.) not recognized by my powerbook (g4). Get error message "The disk you inserted was not readable by this computer". It works just fine with my iMac (g4). If iTunes is open the shuffle is just not recognized. Have tried my shuffle on a friend's PowerBook (Intel based) and it works fine. His new shuffle behaves exactly like mine on my powerbook. All other uses with USB ports appear fine - flash drives etc. I did initialize a new flash drive with 128 bit encryption before the 1st attempt to initialize my new shuffle.
    Help! Thanks

    Does it show in Apple System Profiler's USB tree? Have you tried connecting it (through its dock) to another computer?

  • Ipod Shuffle (2nd Gen) Does Not Recognize Songs

    My Ipod Shuffle (2nd Gen) does not recognize the songs that are loaded on it. When I turn it on after a full charge the green light stays on for about 5 seconds then turns off. When I press play, the colors flash orange and green indicating there are no songs loaded. I've tried all the recommendations and also seen that people with similar problems have not been able to resolve the problem as well. I've seen some cases where the use of the Ipod Rest Utility is recommended however I have Vista on my PC and there is no version available for that o/s that I could find. Does anyone have any other suggestions. Thanks.
    Ipod Shuffle (2nd Gen)   Windows Vista  

    I changed the iPod to Disk mode and it just blinks orange while it is connected to the PC. It says that it is synched on the PC screen but I thought the blinking orange light means that it isn't. I took it back out of disk mode. The original problem still exists...when I turn it on, the green light stays lit for 5 seconds then there's no light at all....when I press play the lights alternate orange and green indicating no music is loaded which is wrong since it shows all my songs that are loaded when it is connected to my PC. What a mess.

  • IPod Nano (2nd gen.) not displaying in finder or desktop

    iPod Nano (2nd gen.) not displaying in finder or desktop BUT shows up in iTunes, it used to show up on the desktop, I don't get it
    help would be appreciated
    Thanks

    Have the same issue but with latest iPod nano 7 Gen, second day trying

  • IPod shuffle 2nd Gen is not recognized on PC, but other shuffles are. Software is updated. Is this the end of the road for this particular shuffle?

    iPod shuffle 2nd Gen is not recognized on PC, but other shuffles are. Software is updated. Is this the end of the road for this particular shuffle?

    Hi envisionquest,
    I'm sorry to hear you are having issues with your iPod. If your 2nd Gen iPod shuffle isn't being recognized by iTunes (but other are), you may find the troubleshooting steps outlined in the following Troubleshooting Assistant helpful:
    Apple - Support - iPod - iPod shuffle (2nd generation) Troubleshooting
    Regards,
    - Brenden

  • I have a Windows 7 laptop, and recently the hardrive broke. I got it repaired and ever since, my ipod touch 4th gen does not connect to itunes and an unknown error (0xE8000012) appears. What do I do?

    I have a Windows 7 laptop, and recently the hardrive broke. I got it repaired and ever since, my ipod touch 4th gen does not connect to itunes and an unknown error (0xE8000012) appears. What do I do?

    try to restore in itunes bye putting in recovey mode turn the ipod off press the home button and plug in the ipod into the computer. an itunes shuld see it in recovery mode and click restore. and that should do the trick.

  • My ipod touch 5th gen will not connect to itunes, but my computer registers my ipod. i have tried placing my ipod in recovery mode, uninstalled and reinstalled itunes, and restarted my laptop but my ipod will not connect to my itunes..... help ._.

    My ipod touch 5th gen will not connect to itunes, but my computer registers my ipod. i have tried placing my ipod in recovery mode, uninstalled and reinstalled itunes, and restarted my laptop but my ipod will not connect to my itunes..... help ._.

    Try
    iOS: Device not recognized in iTunes for Windows
    I would start with              
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or              
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    Before you reinstall the Apple software, also remove iCloud vi Control Panel Remove programs. The reinstall the Apple programs
    New cable and different USB port?
    Runs this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Try on another computer to help determine if computer or iPod problem

  • My ipod shuffle(2nd gen) is not visible on  itunes, i have downloaded latest version of itunes on my pc, how do i solve the problem ?

    My ipod shuffle(2nd gen) is not visible on  itunes, i have downloaded latest version of itunes on my pc, how do i solve the problem ?

    Hope the below link may help you to fix your issue:
    http://support.apple.com/kb/TS3716

  • I currently have an iPhone 4s, ipad2 and 2nd gen iPod touch connected to a dock. Can I control the iPod using my phone or iPad if I have iTunes open on laptop?

    I currently have an iPhone 4s, ipad2 and 2nd gen iPod touch connected to a dock. Can I control the iPod using my phone or iPad if I have iTunes open on laptop?

    The Tango app might be of some help with that:
    http://www.tuaw.com/2010/11/08/tango-links-your-ios-devices-for-remote-music-con trol/

Maybe you are looking for

  • How to generate a PDF output using batch file in 10G

    Hello, I am using .bat file to generate a report PDF output. I have done this many times in 6i but for 10G I am unable to do the same. Can someone please look at the syntax below and let me know where I am going wrong. I understand that reports are d

  • Sound quality from nano(2nd generation)

    Please can someone help, in the last few days when i go to listen to my ipod either via earphones or dock the sound for all the world is like its underwater bubbly sound, i have tried everything and just wondered is there a way to fix this or do i ne

  • OOP's ALV : Download to excel issue

    Hi All, I am using oops ALV in a report . I need to implement it in such a way that when user export the list to excel 1. Downloaded excel should also contain the data printed in top- of-page followed by the grid data.   i.e some desired records foll

  • In OSB, how to poll message from DTAQ(data queue in AS400)??

    Hi, In our OSB project, I have a data queue(AS400) in proxy side and Oracle AQ at business side, I can easily connect to Oracle AQ, but I am not able to understand how to connect with DTAQ (data queue). Is there any adapter supporting DTAQ  for OSB.

  • Disable Superdrive Imac

    I have a CD stuck in my Superdrive and have tried everything to get it out, I think its a hardware failure. It tries to read the disk 4 or 5 times, then tries to eject but gets so far then ***** it back in. Until I have time to look at this properly,