Itouch appears to be dead

My daughter's iTouch is not charging.  I had it on the charger overnight and come to see this morning, the battery power still at 0%.  Is the iTouch dead?  I can't charge it, nor update it, let alone turn it on long enough for me to reset the settings.  Is this something that can be fixed at an Apple store or are they most likely going to tell me to buy a new one?

Do you know that the cable and charger work?  Do you have others ones to try?  I would make an appointment at the Genius Bar of an Apple store if different cable/charger does not solve the problem.  You will only loose your time.

Similar Messages

  • My iPod appeared to be dead, i plugged it into my computer to charge and it said it needed to be restored. it updated it and now is stuck and my itunes says "waiting for iPod" and has been this way for hours. please help!

    my iPod appeared to be dead, i plugged it into my computer to charge and it said it needed to be restored. it updated it and now is stuck and my itunes says "waiting for iPod" and has been this way for hours. i've tried to hold down the home and power button and nothing happens!! my computere and itunes recognizes the iPod, but the iPod its self is completely unresponsive!! and helpoful hints?

    See Here...
    AMDS
    http://support.apple.com/kb/TS1567

  • Ipad 2 screen appears to be dead

    I accidently inserted my Iphone charger USB into the Ipad 2 and tried to back up in the computer. Now I found my Ipad 2 screen appears to be dead. Only the apple image shown and the Itune cannot identify Ipad. 
    What should I do?

    Try a Reset...
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    Also see here for
    Unresponsive iPad
    http://support.apple.com/kb/TS3281

  • My iPad appears to be dead.  Used it yesterday, had it charging all night, now does nothing.  Any ideas?

    My iPad appears to be dead. Put it on the charger last night. Now, it will do nothing.  Any ideas?

    Try reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • IPad appears to be dead

    Hiya
    My iPad appears to be dead. Nothing out of the ordinary happened. It was switched on and when I pressed the home button the screen went grey then...nothing.
    I have tried charging/reset/hard reset. Nothing happened. I have also tried to connect to iTunes to reset but the screen is still black. I can hear a very low sound though...not sure what's happening but I thought was worth checking here before sending it away.
    Cheers
    K

    Try reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • Firewire appears to be dead

    My Firewire appears to be dead on my Dual 867 MDD G4. Portable drives don't mount (Hard drive and CD/DVD) Tested the HD on my MBP and it was fine.
    Disk utility couldn't see them either. I restarted, repaired permissions... No improvement.
    Any tips?
    Oh The system profiler shows "Firewire: " That's it... no details.

    Thought you could use this info about getting FireWire to work!
    First, you should always Repair Permissions in Disk Utility before and after any update; I would do that now. If you installed your update with FireWire plugged in, your Mac may not recognize it anymore.
    Try resetting your FireWire ports by disconnecting all FW devices, shut down your Mac and unplug it from AC power (wall socket) for 30 minutes. plug it back in and try FW.
    If that did'nt work, download the combo update from this site (yours may be corrupt), not Software Update, disconnect all firewire + USB devices except keyboard + mouse, Repair Permissions, re-install update, Repair Permissions again + try. Yours is the 10.4.5 Combo update. Others reading, download the Combo that applies to your system.
    If that still did'nt get it Zap the PRAM. While restarting Mac hold down the following key combo Command-Option-P-R. Keep holding those keys down till you hear the second start-up chime, then release.
    For those of you with Macs that are not PowerBooks or iBooks, a bad internal battery can cause FireWire to not be recognized, so make sure it's good! Also, here is Apple doc.#88338 on getting FireWire to work.
    Good Luck!
    Cheers!
    DALE

  • Light is out and it appears to be dead.

    My time capsule's light is out and it appears to be dead. Can anything be done to fix it?

    If you have AppleCare on any of your Macs, the Time Capsule might be covered.
    Take the Time Capsule to an Apple Store....if you have one in your area.....or contact Apple Support directly to discuss your options 
    http://www.apple.com/support/contact/
    If the Time Capsule is not covered by AppleCare, Apple will not offer repairs, but there are some independent agents that can do this for you. Look under Time Capsule Repair in this link, originally posted by forum expert LaPastenague:
    https://sites.google.com/site/lapastenague/a-deconstruction-of-routers-and-modem s

  • IPad freeze up and appear to be dead and only show a black screen

    My iPad2 freeze up and appear to be dead and only show a black screen, why is it so?

    Have you tried a reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds, after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot. It happens occasionally judging by the posts on here, but only once so far to me.

  • Three week old 3000 N200 notebook appears to be dead - will not boot up

    Hi,
    I bought the Lenovo 3000 N200 notebook about 3 weeks ago and have used it a few times. I was using it today on battery, when the screen went blank and it switched off (I presume the battery went flat, but I didn't see any warning). I went to plug it in, and it appeared to start up for a few seconds, I heard the fan, but then it went dead. I thought the Z symbol I could see on it meant it was sleeping, but I see now it just means power on. I cannot get the system to boot up by pressing the on/off button, function/sleep button, mouse or enter key. Nothing is responding. I have left it a few hours in case things had overheated but still nothing. Luckily, I hadn't yet thrown out my old computer so can send this message. Is there something I am not doing correctly, or is my first new computer in many years (my last couple have been second hand and have lasted for years) dead after 3 weeks?
    Any help appreciated.
    Thanks
    gillian13au

    Hi just found this in Access help which is on your laptop
    Problem: The battery pack cannot be fully charged by the power-off method in the standard charge time for your computer.
    Solution: The battery pack might be over-discharged. Do the following:
    Turn off the computer.
    Make sure that the over-discharged battery pack is in the computer.
    Connect the ac adapter to the computer and let it charge.
    If the battery pack cannot be fully charged in 24 hours, use a new battery pack.
    Problem: Your computer shuts down before the battery status indicator shows empty, -or- Your computer operates after the battery status indicator shows empty.
    Solution: Discharge and recharge the battery pack.
    Problem: The operating time for a fully charged battery pack is short.
    Solution: Discharge and recharge the battery pack. If your battery's operating time is still short, use a new battery pack.
    Problem: The computer does not operate with a fully charged battery pack.
    Solution: The surge protector in the battery pack might be active. Turn off the computer for one minute to reset the protector; then turn on the computer again.
    Problem: The battery pack cannot be charged.
    Solution: You cannot charge the battery when it is too hot. If the battery feels hot, remove it from the computer and allow it to cool to room temperature. After it cools, reinstall it and recharge the battery. If it still cannot be charged, have it serviced.
    Hope this helps

  • Laptop appears to be dead

    I have a Toshiba Satellite A205-S5879 with Intel Pentium Dual Core T2390 processor, 3GB RAM and a 200GB harddrive running Windows 7. It belongs to my nephew and we were trying to download "Marvel Heroes" when it just went black. There was no activity or sound, even though the "on" indicator was lit up. After quite a while we decided to try and restart the computer but the "on" light came on without any booting activity whatsoever.
    It appears dead.
    What in the world happened? How can I undo this?

    Things to try:
    Try a reset - remove battery, unplug power cord, and press power button for 30 seconds. Then try to start with just the power cord connected. Add battery after laptop is running.
    Then if needed, again remove the battery and power cord  reseat the memory - take them out and put them back in, you may need to try one at a time and in different slots to see if you have a bad memory stick or memory slot on the laptop.
    Power supply can be checked for output, you will see the ratings on it for voltage.
    S70-ABT2N22 Windows 7 Pro & 8.1Pro, C55-A5180 Windows 8.1****Click on White “Kudos” STAR to say thanks!****

  • My itouch is just completley dead  its charged but acts like its dead-  black screen all the time  no response

    my iTouch will not power on at all-  Its just completley blank as if it is dead but it is not-- I tried restoring it  Plugging into my computer-  Hard reset   nothing works--  My mom has the exact same problem!!

    plug ipod in to computer leave for 30mins
    now follow these steps and it should work
    1.with ipod still pluged in to computer press and hold both the power and home button for a full 30secs
    2. if apple logo shows 1st let go of the power button wait 5sec's and let go of the home
    3.unplug from computer. if ipod on turn fully off press power button for 5sec and slide to turn off
    4.wait 30sec's turn back on and plug back to computer
    if that does not help and u have an apple store near you go there, they should help u better

  • Why is my phone displaying a pink screen and has appeared to be dead?

    I tried to upload some photos today and for some reason it tried to synch with itunes and iphoto then went dead.  Please tell me there is hope.  How do I revert it back to working again?

    Reset the device:
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    If that doesn't help, tap Settings > General > Reset > Reset All Settings
    If that doesn't help, restore your iPhone >  iTunes: Restoring iOS software

  • IPhone 5s cuts out blue screen appears then Gos Dead

    fone cuts out on me when making calls or on Internet  then Gos to a blue screen then the White screen with Apple logo then shuts down and will not come back on t

    Hello, Obeynelson.  
    Thank you for visiting Apple Support Communities.  
    I understand your iPhone restarts on it's own and will not power on.  I would start with the troubleshooting steps that I have attached below.  Try these steps and please reply back if the issue persists.  
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
    Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    After at least 30 minutes, if:
    The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
    The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
    Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
    If the display turns on, go to step 4.
    If the display remains black, go to next step.
    Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, see the section labeled Issue not resolved.
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/ts2802
    Cheers, 
    Jason H.  

  • My ipod nano appears to be dead

    Theres nothing on the screen even after charging for a few hours, I've tried toggling the switch and holding the menu and select buttons. The odd thing is when it was plugged into the computer I can find all the music on the ipod path?? suggesting that the ipod is not actually fried?  Any suggestions.

    Try these.
    iPod won't turn on.
    iPod battery doesn't charge.
    iPod doesn't appear in iTunes or on the Mac desktop.
    When restoring the iPod, it's often useful to put it into disk mode first.
    Putting iPod into disk mode.
    If none of the above help, it may need service.
    And incidentally, you're in the wrong forum, the iPod mini forum is here.
    http://discussions.apple.com/forum.jspa?forumID=834 : )

  • My iphone 4 appears to be dead while using

    My phone has gone blank suddenly
    No button is working
    Screen is black
    what should i do

    Have you tried to reset your iPhone? Reset the iPhone by pressing and holding the sleep/wake button and the home button for 10-15 seconds until the Apple logo appears, ignore the red slider.  Then turn back on. You won't lose any data doing the reset.

Maybe you are looking for

  • Premiere Elements 12 Project

    I want to give the Details first as I see that is what is needed to get any help. Brand New Lenovo Laptop,  app 5 weeks old. - It  has windows 7 Professional - 64 bit operating system, 146 gb free -  8 GB Memory - ( Just added 4 it started with 4) Pr

  • Devide performance when debugging

    Hi, I've developed some videogames to other mobiles using their own sdk and in that case when debugging the computer lanunched all the application to the mobile instead of being launched from the mobile directly. The hard work was made by the compute

  • My new ipod touch 4G shows lock symbol, how to release?

    My new ipod touch bought from USA showing lock symbol and connect to itunes symbol, how to release the lock, please help me any one

  • DOM support in JavaFx?

    I'm wondering if the org.w3c.dom.Document available in the mobile profile in 'Fx? I can't compile a sample with it under the Mobile profile and can't find any combination of libs to import to provide it.. Thx,

  • Cannot install adobe reader

    I cannot install adobe reader on window XP