ITouch Hold/Power Button
the hold/power button only works when the battery is low(about %20-%30 left). when its high it doesnt work at all. so today i went to the apple store to get my ipod fixed. the lady did the recovery thingy(the battery was still low), then we charged it for about 30 minutes. came back to get it and it worked..... but then when i was leaving it stopped working again. so now i have no clue what to do. i didnt feel like going back.
Hi Tim,
Are you using any accessories with the iPod touch? If you are, try testing without them.
Did the Genius restore the iPod?
Try Restarting the iPod touch by holding the Sleep/Wake button until the red slider appears> then slide to turn off> and turn the iPhone back on by pressing the Sleep/Wake again.
If the issue persists, try restoring the iPod. This article: http://support.apple.com/kb/HT1414 will walk you through the process.
-Jason
Similar Messages
-
After reading and resetting everything with Keyboard I still get blank white screen on 2nd? page of boot. The only way I can boot to Mavericks is unplug power cord, push and hold power button while plugging power cord in. Fans run at full speed, machine boots then runs normal except the dvdrw will not . The mid 2011 IMAC had the same problem with LION. I changed hard drives, formatted, and installed a clean install of latest os x mavericks. Any help would be greatly appreciated.
EtreCheck version: 1.9.15 (52)
Report generated August 30, 2014 at 6:56:41 PM EDT
Hardware Information: ?
iMac (21.5-inch, Mid 2011) (Verified)
iMac - model: iMac12,1
1 2.5 GHz Intel Core i5 CPU: 4 cores
4 GB RAM
Video Information: ?
AMD Radeon HD 6750M - VRAM: 512 MB
iMac 1920 x 1080
System Software: ?
OS X 10.9.4 (13E28) - Uptime: 0 days 0:16:53
Disk Information: ?
ST3120026AS disk0 : (120.03 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted>: 209.7 MB
Untitled (disk0s2) / [Startup]: 119.17 GB (87.12 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
HL-DT-STDVDRW GA32N
USB Information: ?
Apple Inc. FaceTime HD Camera (Built-in)
CHICONY USB NetVista Full Width Keyboard
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
Apple Internal Memory Card Reader
Thunderbolt Information: ?
Apple Inc. thunderbolt_bus
Gatekeeper: ?
Anywhere
Kernel Extensions: ?
[loaded] com.nvidia.CUDA (1.1.0) Support
[loaded] com.sophos.kext.sav (9.0.61 - SDK 10.7) Support
[loaded] com.sophos.nke.swi (9.0.53 - SDK 10.8) Support
Startup Items: ?
CUDA: Path: /System/Library/StartupItems/CUDA
FanControlDaemon: Path: /Library/StartupItems/FanControlDaemon
Launch Daemons: ?
[loaded] com.adobe.fpsaud.plist Support
[running] com.arcsoft.eservutil.plist Support
[running] com.bjango.istatmenusdaemon.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
[running] com.sophos.autoupdate.plist Support
[running] com.sophos.configuration.plist Support
[running] com.sophos.intercheck.plist Support
[running] com.sophos.notification.plist Support
[running] com.sophos.scan.plist Support
[running] com.sophos.sxld.plist Support
[running] com.sophos.webd.plist Support
Launch Agents: ?
[running] com.arcsoft.esinter.plist Support
[running] com.bjango.istatmenusagent.plist Support
[loaded] com.nvidia.CUDASoftwareUpdate.plist Support
[loaded] com.oracle.java.Java-Updater.plist Support
[running] com.sophos.uiserver.plist Support
User Login Items: ?
Macs Fan Control
Firefox
Internet Plug-ins: ?
FlashPlayer-10.6: Version: 14.0.0.176 - SDK 10.6 Support
Flash Player: Version: 14.0.0.176 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
JavaAppletPlugin: Version: Java 7 Update 67 Check version
Default Browser: Version: 537 - SDK 10.9
Audio Plug-ins: ?
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins: ?
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes: ?
CUDA Preferences Support
Fan Control Support
Flash Player Support
Java Support
Time Machine: ?
Time Machine not configured!
Top Processes by CPU: ?
1% WindowServer
1% fontd
0% firefox
0% SystemUIServer
0% SophosWebIntelligence
Top Processes by Memory: ?
229 MB firefox
156 MB SophosScanD
152 MB InterCheck
131 MB com.apple.IconServicesAgent
115 MB SophosAntiVirus
Virtual Memory Information: ?
424 MB Free RAM
1.53 GB Active RAM
1.37 GB Inactive RAM
699 MB Wired RAM
1.26 GB Page-ins
0 B Page-outsI'd start by getting rid of the following software responsible for these extensions.
Kernel Extensions: ?
[loaded] com.nvidia.CUDA (1.1.0) Support
[loaded] com.sophos.kext.sav (9.0.61 - SDK 10.7) Support
[loaded] com.sophos.nke.swi (9.0.53 - SDK 10.8) Support
Startup Items: ?
CUDA: Path: /System/Library/StartupItems/CUDA
FanControlDaemon: Path: /Library/StartupItems/FanControlDaemon
Use the uninstaller provided with the Sophos software. You can uninstall CUDA via the preference pane. Be sure you remove the com.nvidia.CUDA extension which is located in the /System/Library/Extensions/ folder. Not sure if Fan Control has an uninstaller so you will have to do it manually:
Uninstalling Software: The Basics
Most OS X applications are completely self-contained "packages" that can be uninstalled by simply dragging the application to the Trash. Applications may create preference files that are stored in the /Home/Library/Preferences/ folder. Although they do nothing once you delete the associated application, they do take up some disk space. If you want you can look for them in the above location and delete them, too.
Some applications may install an uninstaller program that can be used to remove the application. In some cases the uninstaller may be part of the application's installer, and is invoked by clicking on a Customize button that will appear during the install process.
Some applications may install components in the /Home/Library/Applications Support/ folder. You can also check there to see if the application has created a folder. You can also delete the folder that's in the Applications Support folder. Again, they don't do anything but take up disk space once the application is trashed.
Some applications may install a startupitem or a Log In item. Startupitems are usually installed in the /Library/StartupItems/ folder and less often in the /Home/Library/StartupItems/ folder. Log In Items are set in the Accounts preferences. Open System Preferences, click on the Accounts icon, then click on the LogIn Items tab. Locate the item in the list for the application you want to remove and click on the "-" button to delete it from the list.
Some software use startup daemons or agents that are a new feature of the OS. Look for them in /Library/LaunchAgents/ and /Library/LaunchDaemons/ or in /Home/Library/LaunchAgents/.
If an application installs any other files the best way to track them down is to do a Finder search using the application name or the developer name as the search term. Unfortunately Spotlight will not look in certain folders by default. You can modify Spotlight's behavior or use a third-party search utility, EasyFind, instead.
Some applications install a receipt in the /Library/Receipts/ folder. Usually with the same name as the program or the developer. The item generally has a ".pkg" extension. Be sure you also delete this item as some programs use it to determine if it's already installed.
There are many utilities that can uninstall applications. Here is a selection:
1. AppZapper
2. AppDelete
3. Automaton
4. Hazel
5. AppCleaner
6. CleanApp
7. iTrash
8. Amnesia
9. Uninstaller
10. Spring Cleaning
For more information visit The XLab FAQs and read the FAQ on removing software.
Be sure to remove your two Login Items. Finally do this:
Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu.
Reinstall Lion, Mountain Lion, or Mavericks
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless. -
Wife's Mac Book Pro locked up. She shut it down by holding power button unitl it shut down, when she powers it up now it will not allow her to log in on the log in screen. Any suggestions?
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless. -
iphone 4 will not charge but when i hold power button it the batt comes on and the plug and the lighning bolt shows up. i tried different chargers wall and computer and tried soft reset, the phone died on its own it was jailbroken. but with the batt sing and the plug with the lightning bolt tells me the batt is still vholding charge.
Hello!
i know a place where they can look at your phone. It's call DoctorApple. i went there to repair my phone. this is their phone number : 514 234-2851 -
my phone turns off and does not turn on, even i tries holding power button n home button for few min.... its shows nothing. i connect it to the computer n it doesnt show in itunes. plz reply wats the prblm wid it
Hi kamalkumar,
I'm sorry to hear you are having issues with your iPhone.
The article below will provide some troubleshooting steps for this issue:
iPhone: Hardware troubleshooting
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIs and corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 15 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged. Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
I hope this information helps ....
Have a great day!
- Judy -
iMac making loud beeps and freezes. Only way to shut down is hold power button. Any ideas what might be wrong?
iMac making loud beeps
Could be the RAM (memory)
Power On Self-Test Beep Definition - Part 2 -
My macbook pro wont power up, light flashes if i hold power button continuously
my macbook pro won't power up, if i hold power button down continuously i get a flashing light (by the clasp), i'm thinking this is probably a hard drive issue. anyone have any idea what the problem is?
Hi je339999,
Exactly which model is your MacBook Pro? The problem you're having sounds similar to what is mentioned here -http://support.apple.com/kb/TS2377
However, it's possible that it's something else as well. Are you near an Apple Store or Apple Certified Service Center? It's probably worth it at this point to bring it for additional triage. -
My Ipad 2 will shut completely down if not being used for a while. You have to hold power button down for several minutes before it will power back on. anyone else have this problem and know how to fix? My other sons ipad 2 doesnt do this and they have both had updates and are same generation.
ThanksI had major issues with the iPhone 4s battery, however it’s resolved.
The tech who set the phone up at the Apple store did so with little training.
if you have a mobile me account. First go and move all your data to the cloud by going on your computer and logging in at me.com/move. The cloud has replaced mobile me, so there is no need for those two accounts
Also make sure that for any of your email accounts you set them up to fetch, not push. My tech person set them all to have the email servers push data to the phone. The new iphone4s antenna is extremely strong so it will continually try to access stuff that is pushed–***** a lot of battery life doing this. It makes it worse if you have exchange 2010 accounts. Something about changes made to exchange really suck battery life from devices that access such accounts.
turning of locator and the push notifications from facebook--they have a lot! -
New (3mo) macbook air screen goes black and sometimes won't come back on after I unplug it from the power cord. Any ideas why it is doing this? Sometimes I have to hold power button for 10 seconds for it to shut off then back on. Sometimes holding the power button for a second is enough for it to come back on.
I took it to the Genius Bar, and they identified it as a hardware issue. Just got it back today. Parts replaced were:
620-5629 Display Module — Symptom: Distored/blurred/focus video issue
605-3284 Top Case with Keyboard — Symptom: specific key(s) do not work
So far so good. I'd suggest taking it in and not trying to work around it — it's a rare hardware issue (given the number of threads about it) and should be replaced. -
iMac keep shutting down black screen then have to hold power button down then turn it on again i did this 4 times in all of a period of 15 minutes what to do ??
Hmm. The problem still may be the RAM - Apple buys the RAM it puts in its machines from third-party vendors (usually Hynix) so it could be a RAM problem.
There are a couple of things that you can do yourself before taking your machine into an Apple Store or an AASP... download and run an application named Rember that will run a RAM test for you - let it run for a couple of hours or even overnight. If it turns out that your RAM is faulty, Rember will let you know. If it is faulty, then you have a couple of options - replace the RAM yourself or (particularly if you're under warranty still) take the machine to an Apple Store or AASP and have them replace the RAM.
If Rember finds no fault with the RAM, then you'll need to take it into an Apple Store/AASP and get a free diagnosis on the machine. Three beeps do usually indicate faulty RAM, but if it tests good with Rember you likely have another problem - it could be something as simple as the RAM, somehow, not seated correctly or signs of another hardware problem.
Run Rember first... call back with results.
Good luck,
Clinton -
locked ipod touch with password - tried to reset ipod by holding power button and home button for 10 seconds and it came up asking for password again
If you forgot your screen-lock passcode then:
Connect the iOS device to your computer and restore via iTunes. Place the iPod in Recovery Mode if necessary to allow the restore.
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Backing up, updating, and restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the iPod backup that iTunes makes.
You can redownload iTuns purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
Mid-2010 15in. MacBook Pro going to black screen requiring reset by holding power button
Hello all,
I have been searching for a problem solution for quite some time now. I have a mid-2010 15" Macbook Pro (2.4GHz Intel I5; 4 GB mem) updated to version 10.7.5. The computer randomly goes to a black screen, while the program / movie / whatever is still running (I can hear the sound) and then stalls. I then have to hold the power button down until it will reset. I will post the error message at the end of this.
I have wiped the computer clean and reinstalled everything and that did not help. I am no longer under Apple warrenty and hoping that someone has experienced. Short of me finding an answer I will take it in to Apple. Thanks in advance for any help!
Error report:
Interval Since Last Panic Report: 9808 sec
Panics Since Last Report: 1
Anonymous UUID: 716F24AA-2763-4A12-A3CA-877FE127FD02
Sat Sep 28 14:06:10 2013
panic(cpu 2 caller 0xffffff7f81425007): NVRM[0/1:0:0]: Read Error 0x00000100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xc0000000 0xffffff809e52e000 0x0a5480a2, D0, P2/4
Backtrace (CPU 2), Frame : Return Address
0xffffff807b1d37e0 : 0xffffff8000220792
0xffffff807b1d3860 : 0xffffff7f81425007
0xffffff807b1d38f0 : 0xffffff7f8151db83
0xffffff807b1d3950 : 0xffffff7f8151dbf7
0xffffff807b1d39c0 : 0xffffff7f823ad855
0xffffff807b1d3b00 : 0xffffff7f81541ddd
0xffffff807b1d3b30 : 0xffffff7f8142ed6a
0xffffff807b1d3be0 : 0xffffff7f8142a43c
0xffffff807b1d3dd0 : 0xffffff7f8142be4a
0xffffff807b1d3eb0 : 0xffffff7f813c032c
0xffffff807b1d3f00 : 0xffffff7f82570c0b
0xffffff807b1d3f50 : 0xffffff7f825714b2
0xffffff807b1d3f70 : 0xffffff800023dbbc
0xffffff807b1d3fb0 : 0xffffff8000820057
Kernel Extensions in backtrace:
com.apple.NVDAResman(7.3.2)[97284661-2629-379E-B86B-D388618E8C30]@0xffffff7f813 be000->0xffffff7f816b9fff
dependency: com.apple.iokit.IOPCIFamily(2.7)[5C23D598-58B2-3204-BC03-BC3C0F00BD32]@0xffffff 7f8082b000
dependency: com.apple.iokit.IONDRVSupport(2.3.4)[7C8672C4-8B0D-3CCF-A79A-23C62E90F895]@0xff ffff7f813ac000
dependency: com.apple.iokit.IOGraphicsFamily(2.3.4)[D0A1F6BD-E66E-3DD8-9913-A3AB8746F422]@0 xffffff7f81373000
com.apple.nvidia.nv50hal(7.3.2)[38ACBB3D-4E3C-3883-9A4B-67F15592905F]@0xffffff7 f82248000->0xffffff7f8256afff
dependency: com.apple.NVDAResman(7.3.2)[97284661-2629-379E-B86B-D388618E8C30]@0xffffff7f813 be000
dependency: com.apple.iokit.IOPCIFamily(2.7)[5C23D598-58B2-3204-BC03-BC3C0F00BD32]@0xffffff 7f8082b000
com.apple.driver.AGPM(100.12.75)[4EBF3D1C-F65A-32E5-8C97-B8AA89FD05FC]@0xffffff 7f8256e000->0xffffff7f8257efff
dependency: com.apple.iokit.IOPCIFamily(2.7)[5C23D598-58B2-3204-BC03-BC3C0F00BD32]@0xffffff 7f8082b000
dependency: com.apple.driver.IOPlatformPluginFamily(5.1.1d6)[57AAAA9E-4530-35EE-ACB1-A4E893 53D507]@0xffffff7f80a89000
dependency: com.apple.iokit.IONDRVSupport(2.3.4)[7C8672C4-8B0D-3CCF-A79A-23C62E90F895]@0xff ffff7f813ac000
dependency: com.apple.iokit.IOGraphicsFamily(2.3.4)[D0A1F6BD-E66E-3DD8-9913-A3AB8746F422]@0 xffffff7f81373000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
11G63
Kernel version:
Darwin Kernel Version 11.4.2: Thu Aug 23 16:25:48 PDT 2012; root:xnu-1699.32.7~1/RELEASE_X86_64
Kernel UUID: FF3BB088-60A4-349C-92EA-CA649C698CE5
System model name: MacBookPro6,2 (Mac-F22586C8)
System uptime in nanoseconds: 12779383361706
last loaded kext at 302561508520: com.apple.filesystems.msdosfs
Model: MacBookPro6,2, BootROM MBP61.0057.B0C, 2 processors, Intel Core i5, 2.4 GHz, 4 GB, SMC 1.58f17
Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 256 MB
Graphics: Intel HD Graphics, Intel HD Graphics, Built-In, 288 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1067 MHz, 0x80AD, 0x484D54313235533642465238432D47372020
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1067 MHz, 0x80AD, 0x484D54313235533642465238432D47372020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.106.198.19.22)
Bluetooth: Version 4.0.8f17, 2 service, 11 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: ST9320325ASG, 320.07 GB
Serial ATA Device: MATSHITADVD-R UJ-898
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfa100000 / 2
USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 5
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8218, 0xfa113000 / 8
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0236, 0xfa120000 / 4
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0xfa130000 / 3
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: Built-in iSight, apple_vendor_id, 0x8507, 0xfd110000 / 4
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd120000 / 3You have the MacBookPro6,2, the Edsel of Macs. It may be covered by this program:
MacBook Pro (15-inch, Mid 2010): Intermittent black screen or loss of video
Make a "Genius" appointment at an Apple Store, or go to another authorized service provider, to have the machine tested. The routine hardware diagnostics used by service providers may not detect the fault. There is a specific test for this issue.
Print the first page of the panic report, and the support page linked above, and bring them with you.
Note that the replacement program only applies within three years of purchase. If you wait beyond that date, Apple may refuse the service. In that case, you'll be quoted a price of about $300 (in the U.S.) for a depot repair. The model was discontinued in February 2011, so the replacement program will be ending quite soon.
Back up all data on the internal drive(s) before you hand over your computer to anyone. If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
Sometimes the replacement part is also defective, so be prepared for that possibility.
If it's too late for your unit to be repaired under the program, and you don't want to pay for a new logic board, you may be able to stop the panics by disabling automatic graphics switching.
*An SSD doesn't need to be zeroed. -
Unable to close Safari pages. Have to hold power button to close out.
This has happend 3 times now within the last week or so. Everytime it has happend, I was on "Myspace" and had other pages open. The red close button and the Home button are faded when this occours. The only way to close out is to hold the power button until it shuts off. Any thoughts would be greatly appreciated! Thanks!
Welcome to Discusssions - have you tried to Force quit Safari? Either go to the blue apple in the menu bar and scroll down till you reach force quit and select Safari, or go to the Safari icon in the dock, click on it and select force quit.
Once you have done that, you might want to empty the Safari caches and delete the history. You should also go to User>Library>Preferences>com.apple.Safari.plist and drag it to the trash.
Please let us know how you made out,
Miriam -
24" video will pixelate and eventually freeze and has to be powered down by holding power button
I have a 24" intel based imac 2006 model- Recently it has begun to show pixel blocks on the screen and will eventually lock up and has to be powered down by holding the power button.
Is this limited to the time you are using specific programs or does it happen regardless of what program you run?
It could be heat-related. Beofre incurring the expesnce of a new logic board, make sure the vent on teh bottom of the comptuer oare unobstructed by paper's etc on your workstation or by lint and dust. You canvacuum off any ling and get more cool air into the vents.
You may want to get a program like this:
http://bresink.com/osx/TemperatureMonitor.html
to monitor and report your temperatures here. -
I've had this issue since first buying my MBA mid-2013. Instead of going to standby, which works 98% of the time, every now and again it appears to go into standby with the screen black, but no amount of key pressing or mouse moving will wake it up. I am forced to hold down power button for a manual restart and faced with losing work. This problem has occured whilst using Mountain Lion and still occuring since updating to Maverick.
GoreLeech wrote:
Hello,
Having searched high and low, I can't seem to find a solution to my predicament.
Sun Feb 13 20:50:44 2011
panic(cpu 0 caller 0x9f8bfa): NVRM[0/1:0:0]: Read Error 0x00000100:
Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 256 MB
Hi there, GoreLeech,
as per above extract from your error log, you have experienced a kernel panic due to problems with your Nvidea GeForce GT 330 M graphics card that has a 256 MB memory.
This may be due to the card not having enough memory for what you are doing, the only thing, I can suggest here is to call Apple, and get the machine checked out. You can run the Apple hardware test at home but I'd recommend getting it booked in with Apple. What is worse: A computer that randomly malfunctions, or doing without it for up to one week (often they repair it within a day!)?
Maybe you are looking for
-
How can I stream from my macmini to my apple tv
How can I stream from my desk top to my apple tv. My Wi-Fi network is up and working and I'm able to watch all the netflix, youtube and hulu content endlessly. But how can I also stream directly from my dektop?
-
Meaningful way to identify steps executed in a loop?
Hello, I have a set of tests, where I apply a voltage to many different pins (sequentially) while checking the response for each pin on a CAN bus. I implemented the tests in a loop, like this (pseudo-code): paramsArray = initParamsFromFile() For_each
-
ESR,ID working with 8000 port but not with 50000
Hi experts, I am working with PI 7.1. I am working with SOAP to ABAP SERVER Proxy scenario. I have downloaded the WSDL from ID and using XMLSPY sent a SOAP request to PI server and I got an error in SXMB_MONI under the Call Adapter step saying CLIENT
-
I am using the Hipster Pro font... and when I use it in ppt for MAC, Evana-- the v in Evana has a swoop that extends outside and in mail it doesn't. I'm not sure why this discrepancy exists as my logo doesn't have it and its causing me problems. Whe
-
Adding approvers for a SC in awaiting approval status
Hi Experts, I have created a shopping cart that has to be approved by some approver in the organization. until now everything is working fine. when i am adding a new approver by editing the shopping cart, it is displaying that the cart is successfull