Itouch screen in black...its charged...and is not showing up when plugged in Itunes???

My iTouch is not responding...I have plugged it in to recharge it, pressed on/off switch and home button simultaneously, and nothing.  When I plug it in to the computer it does not show on ITunes that it is plugged in either.

See if placing the iPod inrecovery mode willallow iTunes to see the iPod. For recovery mode:
iPhone and iPod touch: Unable to update or restore
Then try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Last, make an appointment at the Genius Bar of an Apple store.

Similar Messages

  • My iPhone will not charge and will only turn on when plugged into adapter.

    I have tried to reset and nothing. It turns off if I unplug it and will only turn on when plugged in. The charge has not moved above 19% even though I let it charge for 3 hours while I was out. What do I do?

    http://support.apple.com/kb/TS2802

  • IPod 4 screen is black, already charged and tried resetting

    MY iPod 4 screen is black, I have already charged it and tried resetting several times

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • My second gen iPod touch has a blank screen, and won't turn on or charge in an AC outlet. When plugged into iTunes, it is completely recognized and synced, but the screen remains blank and off. What can I do?

    Hello.
    I recently woke up this morning to use my iPod Touch (2nd Gen) to find that it was completely unresponsive to both buttons and would not turn on. I had been using it the night before and had not charged it. Thinking the battery was drained, I plugged it into a wall outlet for two hours, and still no sign of life on the iPod. Plugging it into the computer, it immediately showed up in iTunes and synced normally, and even indicated it had nearly a full charge. Still, however, the screen showed nothing. I checked the lock and home buttons to see if it was stuck, but it was not. Does anyone have an idea of what this is? Do I need to get my iPod repaired? Any help would be appreciated.
    I am running iOS 4.1, and am out of warranty coverage.
    Thanks,
    - Justin

    1; Do a hard rest by holding the buttons at least 15 seconds. Does the Apple logo come on?
    2. Hold the power button down for at least 5 seconds. Do you see the battery symbol?
    If the answer is no to both questions, you most likely have a hardware issue--possible bad battery.
    Basic troubleshooting steps  
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
     In Memory of Steve Jobs 

  • My iphone4 wont show its charging and will not turn on

    my iphone was working great no problems it had a 50% charge i fell asleep when i woke up it would not turn on so i plugged it into the charger and it will not even show the charging bar on front screen what could be the problem?

    If reset does not work try to force into Recovery mode and restore device.....
    Connect to itunes
    Hold down home and power button until you see iitunes icon with arrow and usb on your phone.
    You will get a pop up in itunes that it has detected a phone in recovery mode you must restore.

  • My ipod touch will not come on. I originally thought it needed to be charged but.it has charged and nothing is happing. When connected to itunes its showing up as iphone.

    my ipod will not turn on and when connected to itunes to try to restore it shows up as a iphone. totally puzzled

    Try:
    iOS: Not responding or does not turn on
    If not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • Ical appears translucent in dock and will not show events when opened

    Has anyone recently experienced iCal appearing translucent in the dock? This is weird and just recently started happening. Once iCal is launched it appears normal in the dock but goes back to translucent when I quit. Our MacBook Pro is brand new just a few weeks old and all the software is up to date. Also, even weirder, suddenly the events are not showing up in the month view when launched. I can go back to December and then move to January and then they appear. I made sure that the preferences are checked to show times and that in View "show the to do list" is selected. Whenever it has been launched the calendar is blank and will only show events after view or preferences have been manipulated. Any help would be appreciated..

    kkovardfd,
    Welcome to Apple Discussions.
    Do you have any duplicate fonts? If so, make sure to resolve duplicates with Font Book.
    Remove the iCal icon from the Dock, and replace it with the iCal Application located in your Applications folder.
    Open System Preferences...>Language & Text>Formats> and set/re-set your appropriate "Region."
    After deleting the iCal plist, also delete the com.apple.Dock.plist, log out/in from your account, or restart the computer. Your Dock will revert to default appearance.

  • TS1393 my ipod was fine util it completly stoped charging and last night it said to plug it itunes and it still doesnt work.what should i do??

    plaese answer this.

    Hello princessgirly123,
    Thanks for the question. I understand you are having issues with your iPod displaying a connect to iTunes graphic. I have included two resources (one for iPod touch, the other for all other models) that may provide assistance in troubleshooting this issue:
    If you have an iPod touch:
    Apple - Support - iPod touch - Restore Troubleshooting Assistant
    http://www.apple.com/support/ipodtouch/assistant/restore/
    If you have another iPod model:
    Apple - Support - iPod Troubleshooting Assistants
    http://www.apple.com/support/ipod/five_rs/
    Thanks,
    Matt M.

  • HT1925 My ipod is not showing up when I have itunes up. I was told to remove itunes and reinstall however. I receive a message with unable to uninstall the Itunes. It states "could not open key HKEY_LOCAL_MACHINE\SOFTWARE\CLASSES\INTERFACE\(915DA835-02FE-

    can someone please advise on what I should do? unable to uninstall the Itunes. It states "could not open key HKEY_LOCAL_MACHINE\SOFTWARE\CLASSES\INTERFACE\(915DA835-02FE-4953-92FA-624BDF5D 85AB) VEIFY THAT YOU HAVE SUFFICIENT ACCESS TO THAT KEY, OR CONTACT YOUR SUPPORT PERSONNEL,  Which i did . I contacted the apple support and they could not help. has anyone gotten this error? Did some research some results show that this has occurred during updates on the itunes but has not seen how to successfully uninstall without getting this error. I attempted to use the control panel and uninstall but it provides me with the same error all the time. I NEED SOME Answers on this issue. Can you please help?!

    Perhaps try the fixit from the following Microsoft web page. (Try the "problems uninstalling" option.)
    Fix problems with programs that can't be installed or uninstalled

  • Trying to upgrade from OS9 to 10.2.3, get as far as "select a Destination"  the installation stalls and does not show any destination disks

    I have a Power Mac G4, it has OS 9.  Imam trying to upgrade to OS 10.2.3 (Jaguar).  It is going smoothly until I get to the "Select Destination"  screen.  It stalls there and does not show any disks to choose from.
    Any ideas?
    Thanks. Abe Oliver

    Hello Abe,
    If it's a Digital Audio or earlier, you need to install a Firmware update first...
    As explained in "Mac OS X 10.2 Welcome and Install Manuals" and "Mac OS X Welcome and Install Manuals", you may need to update the firmware on your Macintosh computer prior to installing Mac OS X 10.2 or later. The following table lists the firmware updates that are available for Apple products that can update to Mac OS X 10.2 or later.
    http://support.apple.com/kb/HT1395?viewlocale=en_US
    Power Mac G4
    Firmware Update
    Download Document No.
    Power Mac G4 (Mirrored Drive Doors 2003)
    no update needed
    Power Mac G4 (FW 800)
    no update needed
    Power Mac G4 (Mirrored Drive Doors)
    no update needed
    Power Mac G4 (QuickSilver 2002)
    no update needed
    Power Mac G4 (QuickSilver)
    no update needed
    Power Mac G4 (Digital Audio)
    Power Mac G4 Firmware Update 4.2.8
    120068
    Power Mac G4 (Gigabit Ethernet)
    Power Mac G4 Firmware Update 4.2.8
    120068
    Power Mac G4 (AGP Graphics)
    Power Mac G4 Firmware Update 4.2.8
    120068
    Power Mac G4 (PCI Graphics)
    no update needed
    Power Mac G4 Cube
    Power Mac G4 Cube Firmware Update 4.1.9
    75129

  • So, after my iPod touch died, i plugged it into the computer to try and charge it, and now it keeps changing between the charging screen, the apple logo, and a blank black screen, still hasn't charged, and its been plugged in for almost an hour now

    So, after my iPod touch died, i plugged it into the computer to try and charge it, and now it keeps changing between the charging screen, the apple logo, and a blank black screen, still hasn't charged, and its been plugged in for almost an hour now

    See the not-charging topic of:
    iPod touch: Hardware troubleshooting
    Have you tried another cable?
    Another charging source? Does iTunes see the iPod when you connect to your computer?
    Look at the dock connector on the iPod. Look for abnormalities like bent or corroded contacts, foreign material and cracked or broken plastic.
    - An appointment at the Genius Bar of an Apple store might be in order

  • My iphone 4 screen went black and will not come back on, the screen lights up but is still black and will not show anything on the screen, it still vibrates though. help

    my iphone 4 screen went black and will not show anything on it, the phone still vibrates and lights up but the screen is black, HELP.

    I have a similar problem.  I restored my iPhone 5 to the latest available OS.  After completing the process the phone never restarted.  The phone was fully charged when I restored it but now refuses to charge past the red battery icon.  I have been able to get the phone in UFD mode several times and have been able to load the new OS on the phone.  The Apple logo does come on and the software fully loads.  iTunes tells me the phone will restart but never does.  I left it to charge all night but it never appeared to load the battery.  This morning I went to the Grand Central Terminal apple store for help.  A woman at the store plugged the phone in but it never charged.  She absolutely refused to believe that I got my phone in UFD mode and loaded any software on.  I don't think it is a battery issue.  The only solution I was given was to buy a new phone.  Repairing it was out of the question.  At this point the phone is completely useless.  Thanks in advance for the help.

  • I have an iPhone 3gs and it used to show up on my computer, but now it shows up on my screen that it is charging however, does not appear in iTunes or My Computer so i can't sync it. Can anybody help? Thanks

    I have an iPhone 3gs and it used to show up on my computer, but now it shows up on my screen that it is charging however, does not appear in iTunes or My Computer so i can't sync it. Can anybody help? Thanks.

    Did you already make sure that Apple Mobile Device Service is installed and active on your computer?
    http://support.apple.com/kb/TS1567
    More troubleshooting about your device not recognized in Windows can be found here: http://support.apple.com/kb/TS1495

  • My iPhone 4 has just shut down.  Rang the phone then vibrated for 2 minutes bank screen, will not turn on, also tried charging and will not charge.  Any suggestions

    my iPhone 4 has just shut down.  Rang the phone then vibrated for 2 minutes bank screen, will not turn on, also tried charging and will not charge.  Any suggestions?  I did download a ringtone app and went on to iTunes to sync!. 

    Try charging the iPhone via a wall socket for at least 30 minutes then try a reset by pressing and holding the sleep/wake button and the home button for 20 seconds (maybe longer) until the Apple logo appears, ignore the red slider.  Then turn back on. You won't lose any data doing the reset.

  • My iPhone 3GS on iOS 5.1 will randomly stop what I'm doing show a black screen then the spinning icon and then it shows my lockscreen. It takes about a minute to do this and it does it about 30 times a day. How do I fix this?

    My iPhone 3GS on iOS 5.1 will randomly stop what I'm doing show a black screen then the spinning icon and then it shows my lockscreen. It takes about a minute to do this and it does it about 30 times a day. How do I fix this? It is EXTREMELY ANNOYING!

    No, sounds like when you dropped it an cracked the screen it may have also damaged the logic board or the repair person damaged a cable.

Maybe you are looking for

  • Getting sound from macbook to work on HDTV

    Hi, I'm having problems getting sound from my macbook aluminum 13" to my tv. The tv is a Samsung R8 Series 37" LE37R87BD HD. i got picture up by running a dvi to hdmi to the tv. i have no problem with picture but i can't get any sound. I tried 3.5mm

  • IDOC Receiver problem with 7.11 and ECC6

    Hello, we have a IDOC_2_IDOC scenario on old XI system which worked fine. We are moving now to PI7.11 and get the problem, that all IDOCs in the receiving ECC6 system go to status 51 "No status record was passed to ALE by the application" It seems to

  • JTable DND requires two clicks (fixed but broken in 1.6)

    I'm using a JTable as a source of a drag and drop operation. I can easily get it to work, however, when I want to start a drag from an unselected row I have to first click on the row to select it and then mouse-down on the row and then I can drag it.

  • Help w Real Estate Tutorial

    I am adapting the Flash Form Real Estate tutorial and I am real close to getting everything working. Upon inserting a new listing it puts it in the MS SQL correctly but adds a blank row in the grid. If you refresh it shows up correctly. The only diff

  • Issues with h264 in AME CC

    My usual workflow consists of exporting out a prores version, then using the youtube presets in AME. Today, I encoded 2 videos into the youtube 720p 23.94 preset. One of the videos exported fine (looks fine, file size was about 80mb), the other video