ITOUCH TURNS OFF/ FREEZES FOR NO REASON!

my itouch that apple just sent me cause my broke turns off or freezes for no reason at all! why is this?!?!

I had a simlar issue with a fairly full battery. It'd loaded an app and assumed that this was the cause. Getting the iTouch to switch on was trial and error pressing the two buttons in sequence etc. I was pretty worried. That was a few days ago...since when I haven't been able to sync

Similar Messages

2014 Macbook Air turns off intermittently for no reason.

     Several days ago my Macbook Air started completely shutting down randomly, even if I've got 95% battery. It doesn't go through a shutdown cycle or anything, just suddenly a black screen. I'm usually able to just turn it back on but there have been a few instances where I can't get it back on. The only way I can get it to come back on after that is a combination of dumb luck and endless SMC resets. It seems that I don't have this issue when the laptop is plugged in to the charger.
     From my perspective it seems as if there's a software issue. The battery is fine and the charger works fine. It almost seems as if somewhere along the line the software screws up and for whatever reason thinks that the battery is dead, which would explain why It doesn't happen when I'm running off of an external power source.
     Any suggestions on how to keep this from happening?

These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
This procedure is a diagnostic test. It makes no changes to your data.
Please triple-click anywhere in the line below on this page to select it:
syslog -k Sender kernel -k Message CSeq 'n Cause: -' | tail | awk '/:/{$4=""; print}' | pbcopy
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing the key combination command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
Wait for a new line ending in a dollar sign ($) to appear below what you entered.
The output of the command will be automatically copied to the Clipboard. If the command produced no output, the Clipboard will be empty. Paste into a reply to this message.
The Terminal window doesn't show the output. Please don't copy anything from there.
If any personal information appears in the output, anonymize before posting, but don’t remove the context.

Password to turn off iPhone for security reasons

I live in Mexico City and we get our iphones robbed a lot, my suggestion is that the password could also block turning off the phone so we can use "find my iphone". It would certainly increase the security for us. What do you think?

Tell Apple:
http://www.apple.com/feedback/iphone.html

Macbook pro freezes for no reason even after installing 10.8 on a brand new hard drive

Macbook pro freezes for no reason even after installing 10.8 on a brand new hard drive.
Tried to reset pram, smc, nvram.
Tried installing new RAM.
Tried installing new hard drive.
You should know that my internal drive is installed in a cheap external case and plugged in a USB 2.0 port because i am waiting for a new hard drive cable.all
Yep all good things happened to me...i don't know if all these problems are linked, ahh and also my trackpad is behaving very erraticaly sometimes, it's like it is possessed by a ghost. My computer is not under warranty anymore so i'd like to avoid a trip to the Apple store but i'm close to doing just that.
Any help appreciated...

It's diagnostic software. It's supposed to help you find problems. I don't think anyone is making any software yet that fixes hardware problems.
That said, the two comments:
Le husky wrote:
Macbook pro freezes for no reason even after installing 10.8 on a brand new hard drive....
.....also my trackpad is behaving very erraticaly sometimes, it's like it is possessed by a ghost....
would lead me to think it's the logic board. On older MacBook Pro's both the USB I/O ports and the keyboard/trackpad are fed out of an integrated USB controller integrated into the South Bridge I/O controller. On newer models, the USB ports come out of an integrated North/South bridge controller and the keyboard/trackpad are handled by an SMC controller, which itself interfaces with the I/O controller. All of these items are on the logic board, and they're all unrepairable.
...unless of course the "internal drive [that] is installed in a cheap external case" is itself causing the problems. Another thing to try might be a different USB port, if you haven't done so already.
I didn't know the price for Scannerz went up. I could have sworn I only paid 30-some bucks for it. Maybe it was on sale at the time. I don't remember.
In any case, good luck.

How can I turn off imessage for just one of my contacts? Me and my husband just upgraded (both had iphone 4), I got the iphone 5s and he got he note 3. All my text to him automatically send as a imessage. Ive tried to delete his contact and then went back

How can I turn off imessage for just one of my contacts? Me and my husband just upgraded (both had iphone 4), I got the iphone 5s and he got he note 3. All my text to him automatically send as a imessage. Ive tried to delete his contact and then went back in and reentered it but that doesnt work.

Have your husband text the word "stop" to 48369. This should take his number out of the iMessage system.
Go into your settings under messaging and make sure the box to send as an SMS if iMessage is unavailable is checked.
Hopefully this will get your messages sending/receiving to each other.

Turn off iMessage for just one person

I have one friend that I text a lot who has an iPhone and I want to be able to text her using text message instead of iMessage. Another one of my friends only has an iPod though, so I don't want to turn off iMessage. Is there a way I could turn off iMessage for just my one friend?

Elisa523 wrote:
I have one friend that I text a lot who has an iPhone and I want to be able to text her using text message instead of iMessage. Another one of my friends only has an iPod though, so I don't want to turn off iMessage. Is there a way I could turn off iMessage for just my one friend?
No.
They can turn off iMessage and they won't send/receive them

HT5362 How do I turn off notifications for Software Updates? 'App Store' doesn't show in the list of notification apps. I want the background checks for updates, just not the notifications.

How do I turn off notifications for Software Updates?
In the 'Notifications' section of the 'System Preferences' app, there is no tab for managing the notifications of System Updates nor App Store.
Hey--- I like auto-checking for updates, and hey--- I like auto-downloading them in the background.
BUT I do not like being notified of updates in the middle of working! Especially when it's iTunes updates. Grrrr.
Any chance this is easy and I just missed it?
THANKS COMMUNITY!

Settings > Notification Center > Mail > Select the mail account (if more than one) > Alert Sound > None

Mail shows up in several different inboxes, including the one it was intended. How can I turn off notifications for these duplicate messages?

I would like to turn off notifications for duplicate mail messages.
Thanks,
Ralph Sapertein

Kurt told you how to turn it off. To learn the Spotlight differences between Tiger and Leopard, see http://www.pinkmutant.com/articles/Leopard/leospot.html and my mod to Finder's Find at http://discussions.apple.com/message.jspa?messageID=6725932 for what you can change so you can find stuff excluded by Leopard's default structure.

E71. How to turn off ringer for any contact in con...

Hi
Please can any one share how can I turn off ringer for any specific contact ?
Regardds

use your imagination: assign an empty mp3 file (or an "only silent" mp3 file) to that contact, it should work.
GermanG from Argentina

How to turn off alerts for incoming emails

How do you turn off alerts for incoming emails on the iphone?

Settings>Sounds>Ringer and Alerts>New Mail>Off.

Turn off ATP for a Storage Location

Hi,
I want to turn off ATP for a Storage Location.
I am aware of a setting on IMG where we can have this done but not able to find the right node.
Can someone help me with it?
availability check NOT TO CHECK the stock at the storage location level
Thanks,
Mike

Availability checks can be triggered either automatically or manually:
The availability of components in an order can be checked automatically during order creation and/or order release. You specify in CustomizingOPJK per order type and plant whether the availability should be checked automatically. In addition, an automatic availability check can be carried out when the order is saved.
You can always trigger a manual availability check
The checking scope is defined via the Checking Group (in the material master) and the valid Checking Rule (in Customizing).
They define:
Which MRP elements are taken into account in the check
Which inventory categories are taken into account
Whether the replenishment lead time is taken into account
Whether the check is also to be carried out at storage location level
In Customizing (checking control) you specify which quantity is used to check the availability of a material. You can choose between the following:
Availability Check Against Planned Independent Requirements
In the check against planned independent requirements, the system only checks the open planned independent requirement quantities created for the components. This means that the ATP quantity is not included in this availability check nor are receipts or stocks.
This type of availability check is most useful:
if assembly planning or phantom assembly planning is used to plan the components
if quick statements about the availability situation are required and the results from this check are precise enough
The system uses the open planned independent requirements quantity at component level to determine a committed quantity and this quantity is copied to the planned order header in the Committed quantity field. As opposed to the availability check according to ATP logic, however, the committed quantity is not recorded in the dependent requirements. The planned independent requirements of the components are not consumed by the committed quantity but by the complete dependent requirements quantity. In availability checks that follow, the system can only commit quantities for the amount of planned independent requirements that have not yet been consumed.
In the availability check against planned independent requirements, the following dates/quantities are not calculated:
overall commitment date
partial commitment date/quantity
ATP quantity
In the check according to ATP logic, the system checks whether the dependent requirements of each component are covered by specific receipt and issue elements or by stock. This check is carried out dynamically, that is, each time you carry out the check, the system recalculates the current situation. If a quantity can be committed for the requirement date, the system enters precisely this quantity as the committed quantity in the dependent requirements and the ATP quantity for the components is reduced by the committed quantity. Therefore, in the next availability check, dependent requirements can only be committed for the amount of the remaining ATP quantity.

How to turn off categorization for case management

Hopefully a simple one, how to turn off categorization for case management.
I get this error in CRM 5.0 when choosing Cases.
CASE_MANAGEMENT, CASE_TYPE, Z_01
My categorization in the IC profile is set to ZDEFAULT (copy of default) but only contains
IR     Interaction Record
SO     Service Order
ST     Service Ticket
Does not have the CA case entry that is in DEFAULT.
Z_01 is my case type but I see no place to set the categorization.
I think I am missing something easy but don't see it.

I'm guessing zdefault had same description default and it was picking up the default one in error.

Turning off BIA for an individual query

Hi,
Can anybody where I can go to turn off BIA for a specific query?
Thanks

Hi BW Novice,
I think there is a little bit of confusion within this thread regarding your problem. There are also wrong answers, I am afraid. If I understood you right you want to turn off a BIA index for a specific query, i.e., all other queries that touch the respective cube will still be processed by BIA.
If you follow thoroughly the below steps you will probably get what you need:
1) Goto to transaction SE16 and enter RSRREPDIR as the table name and click the Table Contents button (upper left.)
2) In the resulting selection screen, enter the name for the INFOCUBE that you would like to switch off for the query and press execute (the tick symbol.) Before, in order to help yourself in finding the correct query name later more easily, you might want to choose Settings -> Fields for Selection from the menu and then check the COMPID field in the resulting window.
3) In the resulting RSRREPDIR screen, the queries are listed by name in the column COMPID. Select the respective query and then press the Change button (the little pencil symbol.)
4) There will be a list of fields displayed. Goto NOHPA (you might have to scroll a little bit further down) and check it, i.e., set it to true.
That's it. Do not forget to set the flag back after your tests have been done.
Best regards,
Sascha.

Turn off cellular for apps and they turn back on. Fast battery drain. Shuts down at 30-40%. Battery reads "0" when but rises quickly to 17

Turn off cellular for apps and they turn back on. Fast battery drain. Shuts down at 30-40%. Battery reads "0" when but rises quickly to 17 & charges. Happened after IOS upgrades. Have 3 iPhone 4S for 1-2 years & 1 iPhone 5, w/same problem.

Back up and restore using iTunes.

NewBlueFX - CC versions - turning off GPU for all products needed

I've had NewBlueFX plugins for quite a while now - but the one issue that bugs me about using them is I have to turn off GPU for all products when applying them (virtually every job). I was advised by NewBlue to do this when I was having problems editing and playback being messd around visually why editing.
Just installed (correctly) their updated CUDA versions and still no difference in preformance and still have to turn off GPU...
Clicking on the plugin applied>info>click "disable GPU for all products" and it all runs smoothly.
Does anyone else have the same issue? Is it an issue or is this normal? Why?
Should it not be that effects plugins like this should actually work with all the bells and whistles turned on - not off?
Having spent out on a machine with 24 cores, a Quadro 2000 card and stacks of memory - the machine should be able to handle a NewBlueFX plugin with GPU and everything turned on...?
Am willing to learn on this...

Just below "Extras" in the View menu there is "Show...", where you can check/uncheck individual items - permanently.
Ctrl+H (extras) is just a bucket to collect them all and turn off with a single shortcut.

ITOUCH TURNS OFF/ FREEZES FOR NO REASON!

Similar Messages

Maybe you are looking for