Itouch will not get updated

recently i saw on the apple website that there is a new ipod touch update, so i went on my itunes and it says that the most recent version is the 4.2.1, but on the website it is saying that the 4.3 is the latest update.  how can i correct my itunes to let me update my ipod?

If you have a 2G iPod then you can only go to 4.2.1. To identify your go here:
Identifying iPod models
What version of iTunes do you have on your computer

Similar Messages

  • BWFI_AEDAT table not getting updated - FI_GL_4 Delta

    Hi Friends,
    We have just started loading Delta loads using FI_GL_4.
    The Changed records are getting updated correctly for all the documents into BWFI_AEDAT and loaded into BW except in cases of an Intercompany doc.
    Is there a particular reason that changes to Intercompany Doc will not get updated in the table or is there a way to find out how this table gets populated so that I can debug this issue.
    Any help is highly appreciated..
    Ashish.

    Hi,
    How many days after INIT are you going for delta??
    If there is entry in BWFI_AEDAT there is no reason why delta should not come.
    check for newly created documents in BKPF using CPUDT to see if new documents have been created in this period too.
    Regards,
    Saurabh

  • My itouch will not allow me to connect to my wifi.  It doesn't even let me get onto my wifi settings.  The button is unhighlighted as well so it won't even let me fix it or choose a wifi network!!!!!!

    My itouch will not allow me to connect to my wifi.  It doesn't even let me get onto my wifi settings.  The button is unhighlighted as well therefore it won't even let me fix it or choose a wifi network-any network!!!!!!  So i can't access NOTHING!!!!  Our other new itouch's work fine (im using one right now lol lol) so it isnt my wifi/router....  My itouch is old lol, I've had it for 4 or 5 years and it's cracked up etc...lol lol.  But it still works great, however, it was out of commission for the past 5 months cuz my computer was not working to sync it and it wanted me to "connect to itunes" and i couldnt at the time...(plug it in to sync)....  And now my computer and iTunes are working and the itunes software is updated as well.   So i have synced my itouch and said itouch is working and restored however it will not allow me to access my wifi settings.  The button is unaccessable and unhighlighted as i have stated above already and am in the process of syncing and restoring said itouch again!!!  Which should take another full day or two lol lol omg!!! 
    Please help :)
    I love my old itouch!!! :( and Miss it dearly lol :(
    Ty in advance for anybody's help with this matter.

    My itouch will not allow me to connect to my wifi.  It doesn't even let me get onto my wifi settings.  The button is unhighlighted as well therefore it won't even let me fix it or choose a wifi network-any network!!!!!!  So i can't access NOTHING!!!!  Our other new itouch's work fine (im using one right now lol lol) so it isnt my wifi/router....  My itouch is old lol, I've had it for 4 or 5 years and it's cracked up etc...lol lol.  But it still works great, however, it was out of commission for the past 5 months cuz my computer was not working to sync it and it wanted me to "connect to itunes" and i couldnt at the time...(plug it in to sync)....  And now my computer and iTunes are working and the itunes software is updated as well.   So i have synced my itouch and said itouch is working and restored however it will not allow me to access my wifi settings.  The button is unaccessable and unhighlighted as i have stated above already and am in the process of syncing and restoring said itouch again!!!  Which should take another full day or two lol lol omg!!! 
    Please help :)
    I love my old itouch!!! :( and Miss it dearly lol :(
    Ty in advance for anybody's help with this matter.

  • I recently got a new iphone 4 w/iOs 7. I set up th eicloud, etc. and got my contacts and appointments from outlook. All was fine. Now it will not snyc/update my phone from outlook. I get "Your setup couldn't be started because of an unexpected error."

    I recently got a new iphone 4 w/iOs 7. I set up th eicloud, etc. and got my contacts and appointments from outlook. All was fine. Now it will not snyc/update my phone from outlook. I get "Your setup couldn't be started because of an unexpected error."

    Hello JinxUK,
    Thank you for the details of the issue you are experiencing with the iCloud Control Panel.  I found an article referencing the error message you are getting:
    “Your setup couldn't be started because of an unexpected error.”
    Apple is investigating this issue. This article will be updated as more information becomes available.
    iCloud: iCloud Control Panel setup cannot be started
    http://support.apple.com/kb/TS5178
    I recommend saving that link so that you can check back for a resolution when it becomes available. 
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Windows 8.1 will not get Forefront Client Updates from WSUS

    Recently I noticed that my Windows 8.1 clients were not getting updates from WSUS 3.2.  After some searching I found it was an issue with HTTPS and the solution was to disable HTTPS or enable TLS.  So I enabled TLS on the Server 2008 R2 WSUS server
    and that fixed the issue with my 8.1 clients not getting updates except for Forefront Endpoint Protection 2010.   My SCCM server deploys the client fine but it is version 2.1 and normally the client and definition updates come from WSUS with the
    latest client version being 4.5.  However, my Windows 8.1 machines will not get the client updates even though they are automatically approved for all machines.
    I am just wondering what else I can check or change to make sure my Windows 8.1 clients get the Forefront client updates as they should??   I am wondering if I manually install the 4.1 client update if it will take the client updates after that.  
    I only have about eight Windows 8.1 machines so if I have to do that by hand for now then I will and I think my organization will be moving to Server 2012 and SCCM 2012 this summer sometime.

    I reread your post and have another suggestion. If your SCCM 2007 server is still deploying the old 2.1 FEP client version, then you should install the latest anti-malware platform update for the SCCM server so you can deploy it from there instead of WSUS:
    http://support.microsoft.com/kb/2952678
    http://blogs.msdn.com/b/minfangl/archive/2013/08/15/guidance-on-install-anti-malware-platform-updates-for-fep-2010-su1-and-scep-2012-sp1.aspx
    Also, you may be affected by this:
    "Anti-malware platform updates on MU will use special detection logic and applicability rules to make the anti-malware platform updates available only on computers with previous N-2 anti-malware platforms installed. For example, on April 8<sup>th</sup>,
    anti-malware platform of version 4.5.x will be released on MU, and it will only be offered to computers where anti-malware platform version 4.3.x or 4.4.x is available. If a computer has FEP or SCEP client with version 4.1.x, it has to be upgraded to version
    4.3.x first, then to the latest version (4.5.x). If a computer has FEP or SCEP client with version older than 4.1.x, because of the same N-2 rule, it has to be upgraded to 4.1.x first, then to 4.3.x, and then to the latest version (4.5.x). Required updates
    will be kept on MU to ensure that this upgrade process is available for computers running older versions of the Microsoft anti-malware platform."
    http://blogs.technet.com/b/configmgrteam/archive/2014/03/27/anti-malware-platform-updates-for-endpoint-protection-will-be-released-to-mu.aspx

  • My iTouch will not restore becuase for some reason it won't reconize it. I merely tried to update it with the newest software and every thing went to sh--. Now it is just stuck on the screen showing the apple sign. Can anyone help me.

    My iTouch will not restore becuase for some reason it won't reconize it. I merely tried to update it with the newest software and every thing went to sh--. Now it is just stuck on the screen showing the apple sign. Can anyone help me.

    There's a whole lot to read in your post, and frankly I have not read it all.
    Having said that, this troubleshooting guide should help:
    http://support.apple.com/kb/TS1538
    In particular, pay attention to the mobile device support sections near the bottom, assuming you have already done the items above it.

  • After I updated my 2 Iphones  and one Itopuch the bluetooth on one of the phones and the Itouch will not stay on. When you go to the general settings to turn it on it shows on but the icon disapears when you go to home scree or leave general seetings.

    After I updated my two Iphone 4's and my Itouch bluetooth problem occurred on two of the three devices.  One of the phones and the itouch will not keep the bluetooth on.  When you go to the general settings to turn it on it show on and the icon pops up but as soon as you leave the general settings the icon disappears and will not show up in the home screen.  It will not pair with any devices.   It will search for and find them but won't pair because the icon will not show up meaning it is off. What can i do to fix this problem that I believe was caused by the update.

    Sounds like we have a similar problem.  Four days ago I was playing music through a wireless Bose speaker via bluetooth and everything was fine.  Then I was texting while listening and got 2 texts about the same time as I was typing one and my phone went black.  I pushed the home button and it worked, went into my texts and all were there.  However ever since then the time isn't right, so it can't keep time no matter what I do.  The bluetooth works only at times, the wifi keeps jumping on and off, sometimes my data won't work and the other day I couldn't even turn it off, so had to wait until it died.  The battery life display at that moment wasn't correct either.  Took to Verizon, they couldn't help.  Suggested a factory reset, which I did last night and still the same issues!  One day I couldn't even text my husband on his iPhone.  Just wouldn't work at all.  Did everything suggest and still not good.  Seems like after stalking these pages today a lot of people are having this problem in Dec/Jan and of course also I'm 3 weeks out of my 1 year warranty and so were many others, by days.  Very strange, and all on the 5C.  What did you do?  Is it working now?

  • Phone will not get out of recovery mode/will not update or restore

    Iphone will not get out of recovery mode. I have pressed the home and lock screen at the same time, and nothing happens. I connected it to iTunes to try to update my phone or restore it, and it will not do anything. The progress bar shows up on the screen but does not make any progress and iTunes says it cannot connect to my phone. I have tried everything and went to the AT&T store and they told me to contact Apple support. What do I do now?

    You will have to restore it from Recovery Mode

  • IPod 4th Gen will not get app updates ...error states cant connect to iTunes

    iPod 4th Gen will not get app updates ...error states cant connect to iTunes

    See here: https://discussions.apple.com/thread/4233381?tstart=0
    B-rock

  • ITouch will not update to OS5

    iTouch will not update to OS5

    Need more information.
    What happwn when yu click on update/check for update?
    Wha version of iTunes do you have.? You need 10.5.
    What generationiPod do yu have?  Yu need a 3G or 4G iPod.  Ifyou thing you have a n 8 or 16 GB 3G iPod you really have a 2G iPod. Those can only go to 4.2.1. A 32 GB one can be eithger a 2G or 3G.  To identify yours:
    Identifying iPod models
    enter SN here:
    Apple - Support - Check Your Service and Support Coverage

  • HT1222 My IPad will not install updates because I lack iOS 5.  How do I get the app, please.

    My iPad will not install updates because I lack iOS 5.  How do I get the APP?

    Upgrading iOS
       1. How to update your iPhone, iPad, or iPod Touch
       2. iPhone Support
       3. iPod Touch Support
       4. iPad Support
         a. Updating Your iOS to Version 6.0.x from iOS 5
              Tap Settings > General > Software Update
         If an update is available there will be an active Update button. If you are current,
         then you will see a gray screen with a message saying your are up to date.
         b. If you are still using iOS 4 — Updating your device to iOS 5 or later.
         c. Resolving update problems
            1. iOS - Unable to update or restore
            2. iOS- Resolving update and restore alert messages

  • I've updated to iOS 5 and now my itouch will not sync.

    Hi There:
    My hard drive crashed and has recently been replaced.  I've downloaded some new songs from iTunes but now my itouch will not sync.  It states something about, "sync failed to start" but doesn't state why it failed.  I would really appreciate any ideas of what to check for.  I'm not really good at this.
    K.

    Did you authorize your computer again? About iTunes Store authorization and deauthorization
    Can you back up your ipod manually by right clicking on it in the device list and choosing backup?

  • Data is not getting updated in table using RFC

    Hi Experts,
    In my scenario, I am calling one RFC using RFC receiver channel. After running scenario, channel is showing status that RFC executed successfully. But when I am checking tables in R/3 system, data is not getting updated.
    Moreover , when we tried to execute the RFC manually in R/3 system, that time data uploaded into table successfully.
    Could anybody tell me what would the reason that data not uploading into table when we send it through XI.
    Regards,
    Sari

    HI Sari,
    as you have scenario with RFC receiver.. and as you mentioned that it not updating tables when run through PI but when you execute RFC manually tables got updates.. then following are the options you can check..
    -- if you check RFC communication channel and if everything ok on then.. this means that your RFC is getting triggered successfully..but as you said tables are not updated.. for this you can go to SXMB_MONI and check the log take payload after mapping.. and compare it with the input when you try to execute it manually.. I think the input when you try manually and input to RFC when you try through PI is different and that is causing the Problem.. you will be able to see the difference in input then check.. I think the problem is data and not RFC communication channel..so by using this you will come to know difference
    -- else if possible configure your ID in PI in RFC Receiver and then check and put breakpoint on ABAP side.. so that when PI will hit RFC you will get it in debug mode and able to see what is going wrong..
    Thanks,
    Bhupesh

  • PO Vendor Email ID is not getting updated in PO Output Tab

    Hello Experts,
    We are facing any issue with the PO vendor email id.
    Scenario: While creating the PO, we are mapping the vendor address (Like, Email, phone no, fax no .)From shopping cart which are custom fields of shopping cart.
    And these address details getting flowing to PO while creating PO.
    And we can see the updated address in partner details for the vendor.
    But the issue is coming as, this email id and fax no has get update in the PO Output tab also. This is not working for only email id, where as fax no id getting updated in the PO Output tab.
    Can you please check this and provide us a solution for this issue. Why only the email is not getting updated.
    I noticed that, there is FM module which gets address details of the vendor BBP_OUTPUT_PO_PARAMS_GET from the memory which is not getting the correct details
    Seeking your help.
    We will appreciate if somebody can provide us solution for this issue.
    Thank you,
    Bharathi.
    Edited by: Latha V on Feb 11, 2009 10:01 AM

    Hi check follwoing
    1. Set Delivery complete indicator at plant leve
    spro - mm --inventory mgmt ---Goods receipt --- Set delivery complete indicator
    2. Control field selection for MIGO to disable users from changing it.
    spro -- Materials Mgmt -->Inventory Mgmt -- Settings for enjoy Transaction -->Field Selection for MIGO
    and chek this link
    ["Delivery Completed" Indicator
    Regards
    Kailas Ugale

  • Item text (BSEG-SGTXT) is not getting updated in Payment document generated

    Hi All,
    Item text (BSEG-SGTXT) is not getting updated in Payment document generated through F110.
    After generating the payment document via Transaction Code u2013 F110, system is not updating the
    Text field (BSEG-SGTXT) in the payment document with the text that we have entered in the Invoice (MIRO or FI Invoice).
    In case of manual payment (F-53) we can input the text manually hence that will get updated in
    payment document but this thing is not possible with F110.
    How can I update it?
    Is there any configuration for that?
    Thanks
    Daniel Dorta

    Hi All,
    I've applied the two notes as recommended. However, when I run FBL3N for payment run items, the Text field is update with wrong data, i.e. not from the Text field in FB60
    Thus, I'll like someone to help me with what should exactly be done on the 'Step', 'Pre-requisite' and 'Substitution' side of the Substitution rule (TCode GGB1), I did not fill anything in the Pre-requisite box - is this right?
    Thanx in advance.

Maybe you are looking for