ITP 7613 SigTran Abort message

Hi all
I have a question about SigTran message.
[ Test History ]
1.     We made M3UA session with SGSN(SigTran)
2.     We also made a two ASP in an AS
3.     One of two ASP made an association but other one was not kept an association.
4.     When we took an Ethereal from our ITP to SGSN(SigTran), we sent ‘Abort’ message to SGSN(SigTan).
5.     I don’t understand why ITP sent “Abort” message to him?
6.     The Abort message sent from 172.1.6.100(ITP,local IP) to 172.1.40.14(SGSN remote IP)
7.     I attached our ‘show tech-support and some log” , Ethereal capture log.
7. Actual remote ip addresses:     170.1.40.14     State: inact çwhy is this displayed “inactive” ?
                                                172.1.41.14     State: active (effective prim)
                                                 172.1.40.14     State: active çwhy they have a two ?
     8. SLOT 11/1: Feb 24 11:08:49.553: %CS7XUA-4-ASSOCRESTART: Association 0xB101001A for ASP WPS_ASP2 has restarted
                          èwhat does mean of %CS7XUA-4-ASSOCRESTART? This messages display continuously.
                             How can I solve this error message?
Please, give me some idea for solve this problem.
Thank you for your cooperation!
YONGSIK/MR.AHN

Hello KGKAPONE
Try out the steps in the following article to resolve the issue.
Logic Studio (2009), Logic Express 9: May unexpectedly quit during save, bounce, or quit
http://support.apple.com/kb/TS3968
Thanks for using Apple Support Communities.
Regards,
-Norm G.

Similar Messages

BPM (blocks) stops for Abort messages

Hi,
We are using a RFC to get details from R/3 in a BPM scenario and handled exceptions for this RFC response. Our problem is the error handling behaves well when it has an error or success wherease for an abort messages, the entire process stops with that particular send step with the response from RFC and the does not proceed to the other transformations.
Could you please help us.
Thank you

Are you sure that the Exception raised is catched by the Exception Branch? Do a F7 (check) for your BPM in IR.
If possible host the screenshot of your BPM (send step and the exception handling part atleast) on some commonly accessible website and provide the link here so that somebody can help you out.
Regards,
Abhishek.
Edited by: abhishek salvi on Jun 1, 2010 10:36 PM

Geting abort message in VA01.

Hi
I need to validate Usage in the sales tab of a order(Header data).
Validation is to check the partners(National Accts) in the partner tab.
This validation is working fine during change, But in the creation (VA01) it gives an error message if parner is not exits. But after if u press enter it gives abort message saying the line item does not exits.
Pls help me.
How to get rid of this problem.
Thanks and Regards
Harish

#1. you can use if condition to differentiate creates and changes to the sales order
if t180-trtyp eq 'H' - for create (VA01)
or t180-trtyp eq 'H' - for change of sales order (VA02)
#2. read xvbpa and yvbpa internal tables and design your logic around it.
read oss notes # 178328 on how to manipulate X and Y internal tables within MV45AFZZ program.

Diff between Error,Warning and Abort message

Hi Friends
Can any body tell the Diff between Error,Warning and Abort message
Thanks

Error - Its the abnormal behaviour which was not expected. Its means the process has been hualted at this point. Unless and untill you resolve this, you can not procedd further.
Warnings: Its just the effect of a process it may have on other processes. You can continue doing irrespective of the warnings.
Abort : to terminate a computer processing or data transfer activity.
Thanks..
Shambhu

Warning and abort message for BAPI_MATERIAL_BOM_GROUP_CREATE

Hi to all,
i am creating BOM using FM BAPI_MATERIAL_BOM_GROUP_CREATE , i have passed all necessary parameters, but
waring and abort message are coming with creating bom for BAPI_MATERIAL_BOM_GROUP_CREATE .
W BAPI1080             028
Error/warning when checking the structure of the BOM group with ID=BOMGROUP1
A BAPI1080             018
Item ID=BOM1 is not assigned to a variant/alternative
A BAPI                 001
No instance of object type BOMGroup has been created. External reference:
please can any one tell me what will be the soultion for that.
Regards
Pavneet Rana
Edited by: pavneet rana on Aug 23, 2011 6:27 AM

Thanks for reply ,
yes i have used that link, and i am using same value , except for matnr and plant.
but warning and abort message are coming, and no BOM is creating in MAST.
W BAPI1080             029
Error when checking the data of the object type=BOM / Id=BOM1 of group Id=BOMGROUP1
A BAPI                 001
No instance of object type BOMGroup has been created. External reference:
please can any one provide me the solution for that.
code:
DATA: BOMGROUP TYPE TABLE OF BAPI1080_BGR_C,
        wa_BOMGROUP LIKE LINE OF BOMGROUP,
        variant TYPE TABLE OF BAPI1080_BOM_C,
        wa_variant LIKE LINE OF variant,
        ITEM     TYPE TABLE OF BAPI1080_ITM_C,
        WA_ITEM   LIKE LINE OF ITEM,
        MATERIALRELATIONS TYPE TABLE OF BAPI1080_MBM_C,
        WA_MATERIALRELATIONS LIKE LINE OF MATERIALRELATIONS,
        RETURN    TYPE BAPIRET2_T.
DATA: wa_return LIKE LINE OF RETURN .
wa_BOMGROUP-BOM_GROUP_IDENTIFICATION = 'BOMGROUP1'.
wa_BOMGROUP-OBJECT_TYPE = 'BGR'.
wa_BOMGROUP-OBJECT_ID = 'BOMGROUP1' .
wa_BOMGROUP-TECHNICAL_TYPE = 'M'.
wa_BOMGROUP-BOM_USAGE = '1'.
wa_BOMGROUP-BOM_GROUP = 'BOMGROUP1' .
wa_BOMGROUP-CREATED_IN_PLANT = '2000'.
wa_BOMGROUP-LTXT_LANG = sy-langu .
wa_BOMGROUP-BOM_TEXT = 'Created Using BAPI_MATERIAL_BOM_GROUP_CREATE'.
APPEND wa_BOMGROUP to BOMGROUP.
VARIANTS
wa_variant-BOM_GROUP_IDENTIFICATION = 'BOMGROUP1'.
   wa_variant-OBJECT_TYPE   = 'BOM'. "= 'BGR'. "
wa_variant-OBJECT_ID = 'BOM1' .
   wa_variant-ALTERNATIVE_BOM = '2'.
wa_variant-BOM_STATUS =   '1'.
   wa_variant-BASE_QTY = '100'.
wa_variant-BASE_UNIT = wa_bom_header-BASE_UOM.
   wa_variant-LTXT_LANG = sy-langu .
   WA_VARIANT-LANGU_ISO   = SY-LANGU.
   wa_variant-ALT_TEXT = 'BAPI_MATERIAL_BOM_GROUP_CREATE'.
wa_variant-VALID_FROM_DATE = wa_bom_header-VALID_FROM.
   wa_variant-CHANGE_NO = 'ECN1'.
   wa_variant-FUNCTION     = 'NEW'.
   APPEND wa_variant TO VARIANT.
ITEM
WA_ITEM-BOM_GROUP_IDENTIFICATION = 'BOMGROUP1'.
WA_ITEM-OBJECT_TYPE               = 'ITM'.
WA_ITEM-OBJECT_ID                 = 'BOM1' .
*WA_ITEM-ITEM_ID                   = 'BOM1'.
WA_ITEM-ITEM_NO                   = '0010'.
WA_ITEM-ITEM_CAT                  = 'L'.
WA_ITEM-COMPONENT                 = '300201001'.
WA_ITEM-COMP_QTY                  = '100'.
*WA_ITEM-COMP_UNIT                 = 'KGK'.
WA_ITEM-VALID_FROM_DATE           = SY-DATUM.
APPEND WA_ITEM TO ITEM.
MATERIAL
WA_MATERIALRELATIONS-BOM_GROUP_IDENTIFICATION = 'BOMGROUP1'.
WA_MATERIALRELATIONS-MATERIAL = '1020007'. "lv_matnr. "
WA_MATERIALRELATIONS-PLANT = '2000'.
WA_MATERIALRELATIONS-BOM_USAGE = '1'.
WA_MATERIALRELATIONS-ALTERNATIVE_BOM = '2'.
APPEND WA_MATERIALRELATIONS TO MATERIALRELATIONS.
data: ITEMASSIGNMENTS TYPE TABLE OF BAPI1080_REL_ITM_BOM_C,
      wa_ITEMASSIGNMENTS like LINE OF ITEMASSIGNMENTS .
wa_ITEMASSIGNMENTS-BOM_GROUP_IDENTIFICATION = 'BOMGROUP1'.
wa_ITEMASSIGNMENTS-SUB_OBJECT_TYPE = 'ITM'.
wa_ITEMASSIGNMENTS-SUB_OBJECT_ID = 'BOM1'.
wa_ITEMASSIGNMENTS-SUPER_OBJECT_TYPE = 'BOM'.
wa_ITEMASSIGNMENTS-SUPER_OBJECT_ID = 'BOM1'.
*wa_ITEMASSIGNMENTS-VALID_FROM_DATE
*wa_ITEMASSIGNMENTS-CHANGE_NO
wa_ITEMASSIGNMENTS-FUNCTION = 'NEW'.
APPEND wa_ITEMASSIGNMENTS to ITEMASSIGNMENTS.
CALL FUNCTION 'BAPI_MATERIAL_BOM_GROUP_CREATE'
    EXPORTING
TESTRUN                  = ' '
   ALL_ERROR                = 'X'
TABLES
    bomgroup                 = BOMGROUP
    variants                 = VARIANT
   ITEMS                    = ITEM
SUBITEMS                 =
    materialrelations        = MATERIALRELATIONS
   ITEMASSIGNMENTS          = ITEMASSIGNMENTS
SUBITEMASSIGNMENTS       =
TEXTS                    =
    return                   = RETURN
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
WAIT          =
IMPORTING
RETURN        =
   ENDIF.
loop at RETURN INTO wa_return.
write:/ wa_return-type, wa_return-id, wa_return-number,
wa_return-message.
endloop.
regards
pavneet rana
Edited by: pavneet rana on Aug 23, 2011 8:57 AM

Error message behaving like Abort Message

Hi,
In my program code , there is a error message written, but when this error message is triggered it is displayed as ABORT message and it is skipping the transaction.
SORT zt5.
READ TABLE zt5 INDEX 1.
IF sy-subrc <> '0'.
MESSAGE e208 WITH 'No tiene vistas autorizadas'.
ENDIF.
Could any one tell the reason why it is happening.
Regards
Prasanth Kasturi

Hi Kasturi,
if you issue a ERROR message in "PBO/ AT SELECTION-SCREEN OUTPUT it behaves like ABORT message.
if it is of type "WARNING/INFORMATION then it behaves
as "SUCCESS message(On the Status BAR)
Hope this would clear the concept of MESSAGE types. For more info Take F1 Help on MESSAGE Key word
Cheerz
Ram

Abort Message Printing with SapScript

Dear all
we have a message where we like to abort and the status should remain yellow.
How can I exit the printing program without doing something?
when I change the retcode, I get an error (red), if i don't the message get's green.
Herbert

OK, I try..
i am in the Outbound Delivery process. And I like to print a Message only when a certain value is set. Otherwise the message should remain as it is. So with the message determination I add the message to the delivery and I set automatically 'Immediate print'.
I like to leave now the print program without any modification of the status of the message. So I will not have the status green for treaten, or red for error.
thank you

Java crash with "Abort" message - why?

Hello
I am working with jdk 1.4 , java swing, and graphics 2D
I am drawing a map with polygon objects.
I have a MouseMotionListener over the map, because each Polygon object represents a "Neighborhood" and when I roll over the area I want to highlight that neighborhood.
As I rollover the map, i also dynamically change the text value of two JLablels, so that they reflect the neighborhood name and the name of a restaurant that is located on the map.
Before I cchanged the value of teh restaurant name on the fly, my application quit randomly after rolling around the map for 30 seconds
Now that I change the restaurant name in addtion, application quits after 5 seconds of rolling over the Map.
The application crashes, and in System.out the JVM (NOT my app) writes out the word "Abort"
WHY?! what does this mean, how can i fix the problem?
attached at the bottom is the code for the painting and listening methods. Thanks
I will appreciate GREATLY ANY insight.
thanks again
public void paintComponent(Graphics g) {
super.paintComponent(g);
     Graphics2D g2d = (Graphics2D)g;
     if(_drawMap){
     // System.out.println("Draw all");
     for(int i=0;i < _neighborhoods.size();i++){
          Neighborhood n = (Neighborhood)_neighborhoods.elementAt(i);
          Polygon poly = n.getPoly();
          if(n.getHighlight()){
          g2d.setColor(Color.RED);
          else{
          g2d.setColor(Color.BLACK);
          g2d.draw(poly);
     //System.out.println("Rest " + _restaurants.size());
     for(int j=0; j < _restaurants.size(); j++){
     Vector v = (Vector)_restaurants.elementAt(j);
     Point p = new Point(Integer.parseInt((String)v.elementAt(2)), Integer.parseInt((String)v.elementAt(3)));
     g2d.setColor(Color.BLUE);
     int width = 4;
     int height = 4;
     // System.out.println();
     g2d.fillOval((int)p.getX()+30, (int)p.getY()+10,width,height);
public void mouseClicked(MouseEvent e){
     Point p = e.getPoint();
     int click_x = (int)p.getX();
     int click_y = (int)p.getY();
     System.out.println(p.getX() + ", "+p.getY());
     for(int i = 0; i < _restaurants.size(); i++){
     Vector v = (Vector)_restaurants.elementAt(i);
     int local_x = Integer.parseInt((String)v.elementAt(2));
     int local_y = Integer.parseInt((String)v.elementAt(3));
     if( ((local_x + 30) <= click_x) && (click_x <= (local_x+34)) && ((local_y+10) <= click_y) && (click_y <= (local_y+14))){
          DisplayFrame showit = new DisplayFrame(v,_attributes);
          showit.setDefaultCloseOperation(WindowConstants.DISPOSE_ON_CLOSE);
          showit.show();
public void mouseMoved(MouseEvent e){
     Point p = e.getPoint();
     for(int i=0; i < _neighborhoods.size(); i++){
     Neighborhood n = (Neighborhood)_neighborhoods.elementAt(i);
     Polygon poly = n.getPoly();
     if(poly != null){
          if(poly.contains(p)){
          n.setHighlight(true);
          repaint();
          _mama.setNeighborhood(n.getName());
          else{
          n.setHighlight(false);
          repaint();
     int click_x = (int)p.getX();
     int click_y = (int)p.getY();
     for(int i = 0; i < _restaurants.size(); i++){
     Vector v = (Vector)_restaurants.elementAt(i);
     int local_x = Integer.parseInt((String)v.elementAt(2));
     int local_y = Integer.parseInt((String)v.elementAt(3));
     if( ((local_x + 30) <= click_x) && (click_x <= (local_x+34)) && ((local_y+10) <= click_y) && (click_y <= (local_y+14))){
          _mama.setRestName((String)v.elementAt(0));
}

thank you for your answer.
it can't be the jdk installation, this has never happened to me before
i am also running of my school unix account, there is no way for me to re-install jdk
can there be anything else?
i noticed that a core dump is made every time it crashes, so it looks like i am crashing the JVM.....

Exception ERROR_MESSAGE in FM - Capture Success message

Hai Experts,
We all know that we have Exceptions in Function Modules.
If we call a FM using Pattern button in the Editor it gives all the Importing, Exporting.. and Exceptions. If the FM gives an Error or Abort message (MESSAGE TYPE 'E' or 'A') using MESSAGE keyword, we can capture this message using Exception ERROR_MESSAGE instead of message displayed as a pop up.The Addition ERROR_MESSAGE can be added manually to Exceptions after calling the FM using Pattern button.
My requirement is, using ERROR_MESSAGE we can capture only type 'A' and type 'E' kind of messages. The remaining types (S, I and W) are written to the Application Log(The help documentation says about this point - just check out). I just want to read these messages from the Log or some other means.
How could I get these messages ?
To brief the scenario, what I want is, if the FM runs successfully (without any errors) how could I get the messages (type S, I and W) if I am using Addition ERROR_MESSAGE.
I tried this scenario, but could not see any log using TCodes SLG1 or SM21 (if I am not wrong) after I ran the FM successfully. There are also some FMs to read the logs, but they were not helpful.
Thanks in Advance....
Shashidhar

Raj,
If I am using a Standard FM in which an Information message pops up, then to suppress this pop up we can add ERROR_MESSAGE to EXCEPTIONS. I am running this in Foreground.
I question is, how could I read this pop up message info after calling the FM, i.e. I just do not want a pop-up, instead I want to read this info message without pop-up.
I think you get it. Correct me, if I am wrong.
Thanks for your reply,
Shashidhar

How can you create a spoolfile from a program where have Error Message?

I have a situation where I need a report to come out - even if I have an Error or Abort Message.
I need the report so that i can email the users in a second step of a Job.
We want the CANELLED to show in the JOB queue but when that happens by doing a message with the error it does not output any spool file.
The code is simple:
   CONCATENATE c_errors
                c_error_645
        INTO z_msg_line SEPARATED BY space.
    WRITE z_msg_line TO z_output_line.
    WRITE: z_output_line.
    lv_errors = 'X'.
    MESSAGE ID 'ZX' TYPE 'E' NUMBER '645'.
The job stops, shows CANCELLED but not output to the spool file.
If I change message type to I for imfomation I get the spoolfile but the JOB queue shows COMPLETED so a Basis person will not catch the Cancelled job.
Thanks.

Does the email processing have to occur within the same job? Why not establish a polling process for cancelled jobs where you control the job name(s) to poll for and the linked users to email? When you find a canceled job you can read the job log messages (assuming you have logged your errors using 'S' messages and then used a final 'E' message to stop the job) using function BP_JOBLOG_READ. You could establish a spool from that (and attach it) or just embed the messages in the email body itself.
I'm not sure what your scenario is though - I would separate application errors from technical errors in your error notification process, i.e., handle error notification/emailing within your programs themselves and avoid abending jobs if possible. Are these Basis-handled errors or user-handled errors that you're talking about?
Edited by: Brad Bohn on Aug 19, 2010 3:51 PM

FPN configured for message server port

Hello,
I would like to configure my Consumer Portal to connect to my Producer on port :8101 (the default message server port of the Producer). However, each time I try with this conifguration FPN breaks and nothing works - can't browse the PCD or see remote roles via Identity Management (when I switch the config back to point to port :50000 in the Producer object on the Consumer it works fine again). I'm not using a SAP web dispatcher between the two portals but Producer portal is indeed listening on port :8101 since I can hit it directly. Is this a limitation of FPN?
My http trace shows an ABORT message when trying to connect with the :8101 configuration.
The 8101 port is necessary to be configured in order to leverage our clustered load balanced environment which has the 8101 message server port listening and redirecting to a cluster of servers.
Patrick

When using Remote Delta Links one can configure the SAP Message Server's RMI-P4 port (3901 by default) for RMI-P4 communication.
For the HTTP load balancing you cannot configure it to point to the HTTP port of SAP Message Server (8101 by default) only the application server's HTTP port on the Central Instance (e.g. 50000) can be used.
But don't bother yourselves with this, because SAP recommends using SAP Webdispatcher for HTTP load balancing in FPN scenario, so don't use SAP Message Server directly for HTTP load balancing in the FPN connection setup!

Problem with error message

Hi Experts,
Im populating an error message in the standard transaction (VA03) to restrict the user from viewing the print preview of the document. The error message works perfectly well in the initial screen of the transaction. But when the same functionality is performed after entering into the document, its getting converted to an Abort message. Using the other message types as I,W,.. does not serve my purpose.
Is it anything to do with the screen number? What could be done to change the message type?

Hi,
as mentioned earlier the soultion provided is perfect use can use the message "message'' display like 'E'.
since the list or the document is not been generated and their is no screen as such the program goes for an abort status.
but when we have a screen than the Error message triggers the initial screen.
go with the solution provided..
it will work ..
thanks

ABORT_MESSAGE_STATE : message type 'A'

How do you manage or handling the Abort message in ITSmobile,?
the message type 'A' produce a (ABORT_MESSAGE_STATE : HTTP 500 - Internal Server Error)
MSGTY = 'A' .
For a easy example do you create a simple ITSmobile application ; send a message type 'A'
when 'BTN01'.
sy-MSGID = 'ZZ'.
sy-MSGTY = 'A' .
sy-MSGNO = '000'.
sy-MSGV1 = 'this is a A message'.
MESSAGE ID sy-MSGID TYPE sy-MSGTY NUMBER sy-MSGNO
WITH sy-MSGV1 .
Best Regards

Hi,
to make the solution public here. The Error message came because of an F4-help which was used in PCUI but designed for SAP GUI only. Removing this solved the problem.
Regards,
Daniel

Binding from workflow to work item aborted

Hi,
In my workflow the first two steps are multi condition.
after my second condition i have created activity   step   - Task   and binding the bapi attribute value.
i checked binding no error.
I am getting error in this part.
The error is
Workflow 'TEST' step number 1039: work item could not be created
Source (expression '&PurchaseRequisition.Zvalue&') of binding assignment is not available
Error in the evaluation of expression '&PurchaseRequisition<???>.Zvalue&' for item '20'
Step 15 of WS23000111: Binding from workflow to work item aborted
Error when determining attribute 'Zvalue' of object instance '[BO.BUS2105.001039]'
Step 15 of WS23000111: Binding from workflow to work item aborted
Message no. WFEA031
Diagnosis
Serious errors have occurred in the binding from workflow to work item in step 15 of multistep task WS23000111. As a consequence, workflow 1039 has been forced into error status.
Procedure
"Change Workflow Container" then "Restart After Error" may suffice. It is probable, however, that the binding definition in WS23000111, step 15will have to be changed.
pl help me to proceed further.
Thnks in advance.
sharma

Hi,
Seems that your custom BOR is not delegated to the supertype, please do the same in SWO6 and
also check the binding from event to workflow.
Thanks and Regards,
Swaminathan

PKGBUILD aborts with /usb/media/stv680..internal compiler er

PKGBUILD kernel2.6.12.2 ...custom pkgrel 1..w/downloaded patches.
makepkg PKGBUILD (with config changes in config for -custom)...
Fails with abort message: drivers/usb/media/stv680.o...:internal compiler error Segmentation fault.
Tried twice.

mpie;
The observation is correct. vmlinuz code allows the boot of the CD's kernel. The fact that such code is useable is not covered in the details provided in the archCD.
As reported in previous posts attempting to use vmlinuz, there is no internet access after the boot to arch log-in. All attempts to start the internet fail because the modules have not been loaded (numerous displays of errors during boot-up).
At any rate, the custom kernel generated through ABS after many trials does not produce a boot-up to desktop but just to log-in on vc1 which is unuseable because the keyboard cannot enter single keystrokes..repeats . This action occurred after...pacman -Syu as well when trying to upgrade to kernel 2.6.12.2.
Code is king in performing the upgrades or making changes.
When using ABS to generate a custom kernel in LOCAL VERSION="-custom", it seems that the pkgrel number is important code..."unique" is the word used in the wiki. Any number greater than the latest pkgrel number would be "unique". I suspect that the number to be entered "has to be one greater than the latest pkgrel" and is not a "unique" number.
The custom kernel has the correct config change as desired included in the kernel loaded.
I am not able to utilize kernel2.6.12.2 after many fruitless hours in changing one config line in the kernel config.
I am unable to download via pacman -Syu and get a useable kernel. The keyboard malfunctions.
I have no other ideas for the upgrade. Custom kernel gave the same result thru ABS.
Frustration rules!

ITP 7613 SigTran Abort message

Similar Messages

Maybe you are looking for